mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
[linux/fpc-iii.git] / drivers / usb / host / xhci-plat.c
blob1f3f981fe7f8182b4b4b1707aa4d5f439e556fe6
1 /*
2 * xhci-plat.c - xHCI host controller driver platform Bus Glue.
4 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
5 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
7 * A lot of code borrowed from the Linux xHCI driver.
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
14 #include <linux/clk.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/module.h>
17 #include <linux/of.h>
18 #include <linux/platform_device.h>
19 #include <linux/usb/phy.h>
20 #include <linux/slab.h>
21 #include <linux/usb/xhci_pdriver.h>
22 #include <linux/acpi.h>
24 #include "xhci.h"
25 #include "xhci-plat.h"
26 #include "xhci-mvebu.h"
27 #include "xhci-rcar.h"
29 static struct hc_driver __read_mostly xhci_plat_hc_driver;
31 static int xhci_plat_setup(struct usb_hcd *hcd);
32 static int xhci_plat_start(struct usb_hcd *hcd);
34 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
35 .extra_priv_size = sizeof(struct xhci_plat_priv),
36 .reset = xhci_plat_setup,
37 .start = xhci_plat_start,
40 static void xhci_priv_plat_start(struct usb_hcd *hcd)
42 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
44 if (priv->plat_start)
45 priv->plat_start(hcd);
48 static int xhci_priv_init_quirk(struct usb_hcd *hcd)
50 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
52 if (!priv->init_quirk)
53 return 0;
55 return priv->init_quirk(hcd);
58 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
61 * As of now platform drivers don't provide MSI support so we ensure
62 * here that the generic code does not try to make a pci_dev from our
63 * dev struct in order to setup MSI
65 xhci->quirks |= XHCI_PLAT;
68 /* called during probe() after chip reset completes */
69 static int xhci_plat_setup(struct usb_hcd *hcd)
71 int ret;
74 ret = xhci_priv_init_quirk(hcd);
75 if (ret)
76 return ret;
78 return xhci_gen_setup(hcd, xhci_plat_quirks);
81 static int xhci_plat_start(struct usb_hcd *hcd)
83 xhci_priv_plat_start(hcd);
84 return xhci_run(hcd);
87 #ifdef CONFIG_OF
88 static const struct xhci_plat_priv xhci_plat_marvell_armada = {
89 .init_quirk = xhci_mvebu_mbus_init_quirk,
92 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
93 .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
94 .init_quirk = xhci_rcar_init_quirk,
95 .plat_start = xhci_rcar_start,
98 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
99 .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2,
100 .init_quirk = xhci_rcar_init_quirk,
101 .plat_start = xhci_rcar_start,
104 static const struct of_device_id usb_xhci_of_match[] = {
106 .compatible = "generic-xhci",
107 }, {
108 .compatible = "xhci-platform",
109 }, {
110 .compatible = "marvell,armada-375-xhci",
111 .data = &xhci_plat_marvell_armada,
112 }, {
113 .compatible = "marvell,armada-380-xhci",
114 .data = &xhci_plat_marvell_armada,
115 }, {
116 .compatible = "renesas,xhci-r8a7790",
117 .data = &xhci_plat_renesas_rcar_gen2,
118 }, {
119 .compatible = "renesas,xhci-r8a7791",
120 .data = &xhci_plat_renesas_rcar_gen2,
121 }, {
122 .compatible = "renesas,xhci-r8a7793",
123 .data = &xhci_plat_renesas_rcar_gen2,
124 }, {
125 .compatible = "renesas,xhci-r8a7795",
126 .data = &xhci_plat_renesas_rcar_gen3,
127 }, {
128 .compatible = "renesas,rcar-gen2-xhci",
129 .data = &xhci_plat_renesas_rcar_gen2,
130 }, {
131 .compatible = "renesas,rcar-gen3-xhci",
132 .data = &xhci_plat_renesas_rcar_gen3,
136 MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
137 #endif
139 static int xhci_plat_probe(struct platform_device *pdev)
141 struct device_node *node = pdev->dev.of_node;
142 struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
143 const struct of_device_id *match;
144 const struct hc_driver *driver;
145 struct xhci_hcd *xhci;
146 struct resource *res;
147 struct usb_hcd *hcd;
148 struct clk *clk;
149 int ret;
150 int irq;
152 if (usb_disabled())
153 return -ENODEV;
155 driver = &xhci_plat_hc_driver;
157 irq = platform_get_irq(pdev, 0);
158 if (irq < 0)
159 return -ENODEV;
161 /* Try to set 64-bit DMA first */
162 if (WARN_ON(!pdev->dev.dma_mask))
163 /* Platform did not initialize dma_mask */
164 ret = dma_coerce_mask_and_coherent(&pdev->dev,
165 DMA_BIT_MASK(64));
166 else
167 ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
169 /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
170 if (ret) {
171 ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
172 if (ret)
173 return ret;
176 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
177 if (!hcd)
178 return -ENOMEM;
180 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
181 hcd->regs = devm_ioremap_resource(&pdev->dev, res);
182 if (IS_ERR(hcd->regs)) {
183 ret = PTR_ERR(hcd->regs);
184 goto put_hcd;
187 hcd->rsrc_start = res->start;
188 hcd->rsrc_len = resource_size(res);
191 * Not all platforms have a clk so it is not an error if the
192 * clock does not exists.
194 clk = devm_clk_get(&pdev->dev, NULL);
195 if (!IS_ERR(clk)) {
196 ret = clk_prepare_enable(clk);
197 if (ret)
198 goto put_hcd;
199 } else if (PTR_ERR(clk) == -EPROBE_DEFER) {
200 ret = -EPROBE_DEFER;
201 goto put_hcd;
204 xhci = hcd_to_xhci(hcd);
205 match = of_match_node(usb_xhci_of_match, node);
206 if (match) {
207 const struct xhci_plat_priv *priv_match = match->data;
208 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
210 /* Just copy data for now */
211 if (priv_match)
212 *priv = *priv_match;
215 device_wakeup_enable(hcd->self.controller);
217 xhci->clk = clk;
218 xhci->main_hcd = hcd;
219 xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
220 dev_name(&pdev->dev), hcd);
221 if (!xhci->shared_hcd) {
222 ret = -ENOMEM;
223 goto disable_clk;
226 if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
227 (pdata && pdata->usb3_lpm_capable))
228 xhci->quirks |= XHCI_LPM_SUPPORT;
230 if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
231 xhci->shared_hcd->can_do_streams = 1;
233 hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
234 if (IS_ERR(hcd->usb_phy)) {
235 ret = PTR_ERR(hcd->usb_phy);
236 if (ret == -EPROBE_DEFER)
237 goto put_usb3_hcd;
238 hcd->usb_phy = NULL;
239 } else {
240 ret = usb_phy_init(hcd->usb_phy);
241 if (ret)
242 goto put_usb3_hcd;
245 ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
246 if (ret)
247 goto disable_usb_phy;
249 ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
250 if (ret)
251 goto dealloc_usb2_hcd;
253 return 0;
256 dealloc_usb2_hcd:
257 usb_remove_hcd(hcd);
259 disable_usb_phy:
260 usb_phy_shutdown(hcd->usb_phy);
262 put_usb3_hcd:
263 usb_put_hcd(xhci->shared_hcd);
265 disable_clk:
266 if (!IS_ERR(clk))
267 clk_disable_unprepare(clk);
269 put_hcd:
270 usb_put_hcd(hcd);
272 return ret;
275 static int xhci_plat_remove(struct platform_device *dev)
277 struct usb_hcd *hcd = platform_get_drvdata(dev);
278 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
279 struct clk *clk = xhci->clk;
281 usb_remove_hcd(xhci->shared_hcd);
282 usb_phy_shutdown(hcd->usb_phy);
284 usb_remove_hcd(hcd);
285 usb_put_hcd(xhci->shared_hcd);
287 if (!IS_ERR(clk))
288 clk_disable_unprepare(clk);
289 usb_put_hcd(hcd);
291 return 0;
294 #ifdef CONFIG_PM_SLEEP
295 static int xhci_plat_suspend(struct device *dev)
297 struct usb_hcd *hcd = dev_get_drvdata(dev);
298 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
301 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
302 * to do wakeup during suspend. Since xhci_plat_suspend is currently
303 * only designed for system suspend, device_may_wakeup() is enough
304 * to dertermine whether host is allowed to do wakeup. Need to
305 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
306 * also applies to runtime suspend.
308 return xhci_suspend(xhci, device_may_wakeup(dev));
311 static int xhci_plat_resume(struct device *dev)
313 struct usb_hcd *hcd = dev_get_drvdata(dev);
314 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
316 return xhci_resume(xhci, 0);
319 static const struct dev_pm_ops xhci_plat_pm_ops = {
320 SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
322 #define DEV_PM_OPS (&xhci_plat_pm_ops)
323 #else
324 #define DEV_PM_OPS NULL
325 #endif /* CONFIG_PM */
327 static const struct acpi_device_id usb_xhci_acpi_match[] = {
328 /* XHCI-compliant USB Controller */
329 { "PNP0D10", },
332 MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
334 static struct platform_driver usb_xhci_driver = {
335 .probe = xhci_plat_probe,
336 .remove = xhci_plat_remove,
337 .driver = {
338 .name = "xhci-hcd",
339 .pm = DEV_PM_OPS,
340 .of_match_table = of_match_ptr(usb_xhci_of_match),
341 .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
344 MODULE_ALIAS("platform:xhci-hcd");
346 static int __init xhci_plat_init(void)
348 xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
349 return platform_driver_register(&usb_xhci_driver);
351 module_init(xhci_plat_init);
353 static void __exit xhci_plat_exit(void)
355 platform_driver_unregister(&usb_xhci_driver);
357 module_exit(xhci_plat_exit);
359 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
360 MODULE_LICENSE("GPL");