fs/binfmt_flat.c

   1 /****************************************************************************/
   2 /*
   3  *  linux/fs/binfmt_flat.c
   4  *
   5  *      Copyright (C) 2000-2003 David McCullough <davidm@snapgear.com>
   6  *      Copyright (C) 2002 Greg Ungerer <gerg@snapgear.com>
   7  *      Copyright (C) 2002 SnapGear, by Paul Dale <pauli@snapgear.com>
   8  *      Copyright (C) 2000, 2001 Lineo, by David McCullough <davidm@lineo.com>
   9  *  based heavily on:
  10  *
  11  *  linux/fs/binfmt_aout.c:
  12  *      Copyright (C) 1991, 1992, 1996  Linus Torvalds
  13  *  linux/fs/binfmt_flat.c for 2.0 kernel
  14  *          Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>
  15  *      JAN/99 -- coded full program relocation (gerg@snapgear.com)
  16  */
  17
  18 #include <linux/module.h>
  19 #include <linux/kernel.h>
  20 #include <linux/sched.h>
  21 #include <linux/mm.h>
  22 #include <linux/mman.h>
  23 #include <linux/errno.h>
  24 #include <linux/signal.h>
  25 #include <linux/string.h>
  26 #include <linux/fs.h>
  27 #include <linux/file.h>
  28 #include <linux/stat.h>
  29 #include <linux/fcntl.h>
  30 #include <linux/ptrace.h>
  31 #include <linux/user.h>
  32 #include <linux/slab.h>
  33 #include <linux/binfmts.h>
  34 #include <linux/personality.h>
  35 #include <linux/init.h>
  36 #include <linux/flat.h>
  37 #include <linux/syscalls.h>
  38
  39 #include <asm/byteorder.h>
  40 #include <asm/system.h>
  41 #include <asm/uaccess.h>
  42 #include <asm/unaligned.h>
  43 #include <asm/cacheflush.h>
  44 #include <asm/page.h>
  45
  46 /****************************************************************************/
  47
  48 #if 0
  49 #define DEBUG 1
  50 #endif
  51
  52 #ifdef DEBUG
  53 #define DBG_FLT(a...)   printk(a)
  54 #else
  55 #define DBG_FLT(a...)
  56 #endif
  57
  58 /*
  59  * User data (stack, data section and bss) needs to be aligned
  60  * for the same reasons as SLAB memory is, and to the same amount.
  61  * Avoid duplicating architecture specific code by using the same
  62  * macro as with SLAB allocation:
  63  */
  64 #ifdef ARCH_SLAB_MINALIGN
  65 #define FLAT_DATA_ALIGN (ARCH_SLAB_MINALIGN)
  66 #else
  67 #define FLAT_DATA_ALIGN (sizeof(void *))
  68 #endif
  69
  70 #define RELOC_FAILED 0xff00ff01         /* Relocation incorrect somewhere */
  71 #define UNLOADED_LIB 0x7ff000ff         /* Placeholder for unused library */
  72
  73 struct lib_info {
  74         struct {
  75                 unsigned long start_code;               /* Start of text segment */
  76                 unsigned long start_data;               /* Start of data segment */
  77                 unsigned long start_brk;                /* End of data segment */
  78                 unsigned long text_len;                 /* Length of text segment */
  79                 unsigned long entry;                    /* Start address for this module */
  80                 unsigned long build_date;               /* When this one was compiled */
  81                 short loaded;                           /* Has this library been loaded? */
  82         } lib_list[MAX_SHARED_LIBS];
  83 };
  84
  85 #ifdef CONFIG_BINFMT_SHARED_FLAT
  86 static int load_flat_shared_library(int id, struct lib_info *p);
  87 #endif
  88
  89 static int load_flat_binary(struct linux_binprm *, struct pt_regs * regs);
  90 static int flat_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit);
  91
  92 static struct linux_binfmt flat_format = {
  93         .module         = THIS_MODULE,
  94         .load_binary    = load_flat_binary,
  95         .core_dump      = flat_core_dump,
  96         .min_coredump   = PAGE_SIZE
  97 };
  98
  99 /****************************************************************************/
 100 /*
 101  * Routine writes a core dump image in the current directory.
 102  * Currently only a stub-function.
 103  */
 104
 105 static int flat_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit)
 106 {
 107         printk("Process %s:%d received signr %d and should have core dumped\n",
 108                         current->comm, current->pid, (int) signr);
 109         return(1);
 110 }
 111
 112 /****************************************************************************/
 113 /*
 114  * create_flat_tables() parses the env- and arg-strings in new user
 115  * memory and creates the pointer tables from them, and puts their
 116  * addresses on the "stack", returning the new stack pointer value.
 117  */
 118
 119 static unsigned long create_flat_tables(
 120         unsigned long pp,
 121         struct linux_binprm * bprm)
 122 {
 123         unsigned long *argv,*envp;
 124         unsigned long * sp;
 125         char * p = (char*)pp;
 126         int argc = bprm->argc;
 127         int envc = bprm->envc;
 128         char uninitialized_var(dummy);
 129
 130         sp = (unsigned long *)p;
 131         sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
 132         sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
 133         argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
 134         envp = argv + (argc + 1);
 135
 136         if (flat_argvp_envp_on_stack()) {
 137                 put_user((unsigned long) envp, sp + 2);
 138                 put_user((unsigned long) argv, sp + 1);
 139         }
 140
 141         put_user(argc, sp);
 142         current->mm->arg_start = (unsigned long) p;
 143         while (argc-->0) {
 144                 put_user((unsigned long) p, argv++);
 145                 do {
 146                         get_user(dummy, p); p++;
 147                 } while (dummy);
 148         }
 149         put_user((unsigned long) NULL, argv);
 150         current->mm->arg_end = current->mm->env_start = (unsigned long) p;
 151         while (envc-->0) {
 152                 put_user((unsigned long)p, envp); envp++;
 153                 do {
 154                         get_user(dummy, p); p++;
 155                 } while (dummy);
 156         }
 157         put_user((unsigned long) NULL, envp);
 158         current->mm->env_end = (unsigned long) p;
 159         return (unsigned long)sp;
 160 }
 161
 162 /****************************************************************************/
 163
 164 #ifdef CONFIG_BINFMT_ZFLAT
 165
 166 #include <linux/zlib.h>
 167
 168 #define LBUFSIZE        4000
 169
 170 /* gzip flag byte */
 171 #define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
 172 #define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
 173 #define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
 174 #define ORIG_NAME    0x08 /* bit 3 set: original file name present */
 175 #define COMMENT      0x10 /* bit 4 set: file comment present */
 176 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 177 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 178
 179 static int decompress_exec(
 180         struct linux_binprm *bprm,
 181         unsigned long offset,
 182         char *dst,
 183         long len,
 184         int fd)
 185 {
 186         unsigned char *buf;
 187         z_stream strm;
 188         loff_t fpos;
 189         int ret, retval;
 190
 191         DBG_FLT("decompress_exec(offset=%x,buf=%x,len=%x)\n",(int)offset, (int)dst, (int)len);
 192
 193         memset(&strm, 0, sizeof(strm));
 194         strm.workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
 195         if (strm.workspace == NULL) {
 196                 DBG_FLT("binfmt_flat: no memory for decompress workspace\n");
 197                 return -ENOMEM;
 198         }
 199         buf = kmalloc(LBUFSIZE, GFP_KERNEL);
 200         if (buf == NULL) {
 201                 DBG_FLT("binfmt_flat: no memory for read buffer\n");
 202                 retval = -ENOMEM;
 203                 goto out_free;
 204         }
 205
 206         /* Read in first chunk of data and parse gzip header. */
 207         fpos = offset;
 208         ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos);
 209
 210         strm.next_in = buf;
 211         strm.avail_in = ret;
 212         strm.total_in = 0;
 213
 214         retval = -ENOEXEC;
 215
 216         /* Check minimum size -- gzip header */
 217         if (ret < 10) {
 218                 DBG_FLT("binfmt_flat: file too small?\n");
 219                 goto out_free_buf;
 220         }
 221
 222         /* Check gzip magic number */
 223         if ((buf[0] != 037) || ((buf[1] != 0213) && (buf[1] != 0236))) {
 224                 DBG_FLT("binfmt_flat: unknown compression magic?\n");
 225                 goto out_free_buf;
 226         }
 227
 228         /* Check gzip method */
 229         if (buf[2] != 8) {
 230                 DBG_FLT("binfmt_flat: unknown compression method?\n");
 231                 goto out_free_buf;
 232         }
 233         /* Check gzip flags */
 234         if ((buf[3] & ENCRYPTED) || (buf[3] & CONTINUATION) ||
 235             (buf[3] & RESERVED)) {
 236                 DBG_FLT("binfmt_flat: unknown flags?\n");
 237                 goto out_free_buf;
 238         }
 239
 240         ret = 10;
 241         if (buf[3] & EXTRA_FIELD) {
 242                 ret += 2 + buf[10] + (buf[11] << 8);
 243                 if (unlikely(LBUFSIZE <= ret)) {
 244                         DBG_FLT("binfmt_flat: buffer overflow (EXTRA)?\n");
 245                         goto out_free_buf;
 246                 }
 247         }
 248         if (buf[3] & ORIG_NAME) {
 249                 while (ret < LBUFSIZE && buf[ret++] != 0)
 250                         ;
 251                 if (unlikely(LBUFSIZE == ret)) {
 252                         DBG_FLT("binfmt_flat: buffer overflow (ORIG_NAME)?\n");
 253                         goto out_free_buf;
 254                 }
 255         }
 256         if (buf[3] & COMMENT) {
 257                 while (ret < LBUFSIZE && buf[ret++] != 0)
 258                         ;
 259                 if (unlikely(LBUFSIZE == ret)) {
 260                         DBG_FLT("binfmt_flat: buffer overflow (COMMENT)?\n");
 261                         goto out_free_buf;
 262                 }
 263         }
 264
 265         strm.next_in += ret;
 266         strm.avail_in -= ret;
 267
 268         strm.next_out = dst;
 269         strm.avail_out = len;
 270         strm.total_out = 0;
 271
 272         if (zlib_inflateInit2(&strm, -MAX_WBITS) != Z_OK) {
 273                 DBG_FLT("binfmt_flat: zlib init failed?\n");
 274                 goto out_free_buf;
 275         }
 276
 277         while ((ret = zlib_inflate(&strm, Z_NO_FLUSH)) == Z_OK) {
 278                 ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos);
 279                 if (ret <= 0)
 280                         break;
 281                 if (ret >= (unsigned long) -4096)
 282                         break;
 283                 len -= ret;
 284
 285                 strm.next_in = buf;
 286                 strm.avail_in = ret;
 287                 strm.total_in = 0;
 288         }
 289
 290         if (ret < 0) {
 291                 DBG_FLT("binfmt_flat: decompression failed (%d), %s\n",
 292                         ret, strm.msg);
 293                 goto out_zlib;
 294         }
 295
 296         retval = 0;
 297 out_zlib:
 298         zlib_inflateEnd(&strm);
 299 out_free_buf:
 300         kfree(buf);
 301 out_free:
 302         kfree(strm.workspace);
 303         return retval;
 304 }
 305
 306 #endif /* CONFIG_BINFMT_ZFLAT */
 307
 308 /****************************************************************************/
 309
 310 static unsigned long
 311 calc_reloc(unsigned long r, struct lib_info *p, int curid, int internalp)
 312 {
 313         unsigned long addr;
 314         int id;
 315         unsigned long start_brk;
 316         unsigned long start_data;
 317         unsigned long text_len;
 318         unsigned long start_code;
 319
 320 #ifdef CONFIG_BINFMT_SHARED_FLAT
 321         if (r == 0)
 322                 id = curid;     /* Relocs of 0 are always self referring */
 323         else {
 324                 id = (r >> 24) & 0xff;  /* Find ID for this reloc */
 325                 r &= 0x00ffffff;        /* Trim ID off here */
 326         }
 327         if (id >= MAX_SHARED_LIBS) {
 328                 printk("BINFMT_FLAT: reference 0x%x to shared library %d",
 329                                 (unsigned) r, id);
 330                 goto failed;
 331         }
 332         if (curid != id) {
 333                 if (internalp) {
 334                         printk("BINFMT_FLAT: reloc address 0x%x not in same module "
 335                                         "(%d != %d)", (unsigned) r, curid, id);
 336                         goto failed;
 337                 } else if ( ! p->lib_list[id].loaded &&
 338                                 load_flat_shared_library(id, p) > (unsigned long) -4096) {
 339                         printk("BINFMT_FLAT: failed to load library %d", id);
 340                         goto failed;
 341                 }
 342                 /* Check versioning information (i.e. time stamps) */
 343                 if (p->lib_list[id].build_date && p->lib_list[curid].build_date &&
 344                                 p->lib_list[curid].build_date < p->lib_list[id].build_date) {
 345                         printk("BINFMT_FLAT: library %d is younger than %d", id, curid);
 346                         goto failed;
 347                 }
 348         }
 349 #else
 350         id = 0;
 351 #endif
 352
 353         start_brk = p->lib_list[id].start_brk;
 354         start_data = p->lib_list[id].start_data;
 355         start_code = p->lib_list[id].start_code;
 356         text_len = p->lib_list[id].text_len;
 357
 358         if (!flat_reloc_valid(r, start_brk - start_data + text_len)) {
 359                 printk("BINFMT_FLAT: reloc outside program 0x%x (0 - 0x%x/0x%x)",
 360                        (int) r,(int)(start_brk-start_code),(int)text_len);
 361                 goto failed;
 362         }
 363
 364         if (r < text_len)                       /* In text segment */
 365                 addr = r + start_code;
 366         else                                    /* In data segment */
 367                 addr = r - text_len + start_data;
 368
 369         /* Range checked already above so doing the range tests is redundant...*/
 370         return(addr);
 371
 372 failed:
 373         printk(", killing %s!\n", current->comm);
 374         send_sig(SIGSEGV, current, 0);
 375
 376         return RELOC_FAILED;
 377 }
 378
 379 /****************************************************************************/
 380
 381 void old_reloc(unsigned long rl)
 382 {
 383 #ifdef DEBUG
 384         char *segment[] = { "TEXT", "DATA", "BSS", "*UNKNOWN*" };
 385 #endif
 386         flat_v2_reloc_t r;
 387         unsigned long *ptr;
 388
 389         r.value = rl;
 390 #if defined(CONFIG_COLDFIRE)
 391         ptr = (unsigned long *) (current->mm->start_code + r.reloc.offset);
 392 #else
 393         ptr = (unsigned long *) (current->mm->start_data + r.reloc.offset);
 394 #endif
 395
 396 #ifdef DEBUG
 397         printk("Relocation of variable at DATASEG+%x "
 398                 "(address %p, currently %x) into segment %s\n",
 399                 r.reloc.offset, ptr, (int)*ptr, segment[r.reloc.type]);
 400 #endif
 401
 402         switch (r.reloc.type) {
 403         case OLD_FLAT_RELOC_TYPE_TEXT:
 404                 *ptr += current->mm->start_code;
 405                 break;
 406         case OLD_FLAT_RELOC_TYPE_DATA:
 407                 *ptr += current->mm->start_data;
 408                 break;
 409         case OLD_FLAT_RELOC_TYPE_BSS:
 410                 *ptr += current->mm->end_data;
 411                 break;
 412         default:
 413                 printk("BINFMT_FLAT: Unknown relocation type=%x\n", r.reloc.type);
 414                 break;
 415         }
 416
 417 #ifdef DEBUG
 418         printk("Relocation became %x\n", (int)*ptr);
 419 #endif
 420 }
 421
 422 /****************************************************************************/
 423
 424 static int load_flat_file(struct linux_binprm * bprm,
 425                 struct lib_info *libinfo, int id, unsigned long *extra_stack)
 426 {
 427         struct flat_hdr * hdr;
 428         unsigned long textpos = 0, datapos = 0, result;
 429         unsigned long realdatastart = 0;
 430         unsigned long text_len, data_len, bss_len, stack_len, flags;
 431         unsigned long len, memp = 0;
 432         unsigned long memp_size, extra, rlim;
 433         unsigned long *reloc = 0, *rp;
 434         struct inode *inode;
 435         int i, rev, relocs = 0;
 436         loff_t fpos;
 437         unsigned long start_code, end_code;
 438         int ret;
 439
 440         hdr = ((struct flat_hdr *) bprm->buf);          /* exec-header */
 441         inode = bprm->file->f_path.dentry->d_inode;
 442
 443         text_len  = ntohl(hdr->data_start);
 444         data_len  = ntohl(hdr->data_end) - ntohl(hdr->data_start);
 445         bss_len   = ntohl(hdr->bss_end) - ntohl(hdr->data_end);
 446         stack_len = ntohl(hdr->stack_size);
 447         if (extra_stack) {
 448                 stack_len += *extra_stack;
 449                 *extra_stack = stack_len;
 450         }
 451         relocs    = ntohl(hdr->reloc_count);
 452         flags     = ntohl(hdr->flags);
 453         rev       = ntohl(hdr->rev);
 454
 455         if (strncmp(hdr->magic, "bFLT", 4)) {
 456                 /*
 457                  * Previously, here was a printk to tell people
 458                  *   "BINFMT_FLAT: bad header magic".
 459                  * But for the kernel which also use ELF FD-PIC format, this
 460                  * error message is confusing.
 461                  * because a lot of people do not manage to produce good
 462                  */
 463                 ret = -ENOEXEC;
 464                 goto err;
 465         }
 466
 467         if (flags & FLAT_FLAG_KTRACE)
 468                 printk("BINFMT_FLAT: Loading file: %s\n", bprm->filename);
 469
 470         if (rev != FLAT_VERSION && rev != OLD_FLAT_VERSION) {
 471                 printk("BINFMT_FLAT: bad flat file version 0x%x (supported "
 472                         "0x%lx and 0x%lx)\n",
 473                         rev, FLAT_VERSION, OLD_FLAT_VERSION);
 474                 ret = -ENOEXEC;
 475                 goto err;
 476         }
 477
 478         /* Don't allow old format executables to use shared libraries */
 479         if (rev == OLD_FLAT_VERSION && id != 0) {
 480                 printk("BINFMT_FLAT: shared libraries are not available before rev 0x%x\n",
 481                                 (int) FLAT_VERSION);
 482                 ret = -ENOEXEC;
 483                 goto err;
 484         }
 485
 486         /*
 487          * fix up the flags for the older format,  there were all kinds
 488          * of endian hacks,  this only works for the simple cases
 489          */
 490         if (rev == OLD_FLAT_VERSION && flat_old_ram_flag(flags))
 491                 flags = FLAT_FLAG_RAM;
 492
 493 #ifndef CONFIG_BINFMT_ZFLAT
 494         if (flags & (FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA)) {
 495                 printk("Support for ZFLAT executables is not enabled.\n");
 496                 ret = -ENOEXEC;
 497                 goto err;
 498         }
 499 #endif
 500
 501         /*
 502          * Check initial limits. This avoids letting people circumvent
 503          * size limits imposed on them by creating programs with large
 504          * arrays in the data or bss.
 505          */
 506         rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
 507         if (rlim >= RLIM_INFINITY)
 508                 rlim = ~0;
 509         if (data_len + bss_len > rlim) {
 510                 ret = -ENOMEM;
 511                 goto err;
 512         }
 513
 514         /* Flush all traces of the currently running executable */
 515         if (id == 0) {
 516                 result = flush_old_exec(bprm);
 517                 if (result) {
 518                         ret = result;
 519                         goto err;
 520                 }
 521
 522                 /* OK, This is the point of no return */
 523                 set_personality(PER_LINUX_32BIT);
 524         }
 525
 526         /*
 527          * calculate the extra space we need to map in
 528          */
 529         extra = max_t(unsigned long, bss_len + stack_len,
 530                         relocs * sizeof(unsigned long));
 531
 532         /*
 533          * there are a couple of cases here,  the separate code/data
 534          * case,  and then the fully copied to RAM case which lumps
 535          * it all together.
 536          */
 537         if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) {
 538                 /*
 539                  * this should give us a ROM ptr,  but if it doesn't we don't
 540                  * really care
 541                  */
 542                 DBG_FLT("BINFMT_FLAT: ROM mapping of file (we hope)\n");
 543
 544                 down_write(&current->mm->mmap_sem);
 545                 textpos = do_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC,
 546                                   MAP_PRIVATE|MAP_EXECUTABLE, 0);
 547                 up_write(&current->mm->mmap_sem);
 548                 if (!textpos  || textpos >= (unsigned long) -4096) {
 549                         if (!textpos)
 550                                 textpos = (unsigned long) -ENOMEM;
 551                         printk("Unable to mmap process text, errno %d\n", (int)-textpos);
 552                         ret = textpos;
 553                         goto err;
 554                 }
 555
 556                 len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
 557                 len = PAGE_ALIGN(len);
 558                 down_write(&current->mm->mmap_sem);
 559                 realdatastart = do_mmap(0, 0, len,
 560                         PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
 561                 up_write(&current->mm->mmap_sem);
 562
 563                 if (realdatastart == 0 || realdatastart >= (unsigned long)-4096) {
 564                         if (!realdatastart)
 565                                 realdatastart = (unsigned long) -ENOMEM;
 566                         printk("Unable to allocate RAM for process data, errno %d\n",
 567                                         (int)-realdatastart);
 568                         do_munmap(current->mm, textpos, text_len);
 569                         ret = realdatastart;
 570                         goto err;
 571                 }
 572                 datapos = ALIGN(realdatastart +
 573                                 MAX_SHARED_LIBS * sizeof(unsigned long),
 574                                 FLAT_DATA_ALIGN);
 575
 576                 DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
 577                                 (int)(data_len + bss_len + stack_len), (int)datapos);
 578
 579                 fpos = ntohl(hdr->data_start);
 580 #ifdef CONFIG_BINFMT_ZFLAT
 581                 if (flags & FLAT_FLAG_GZDATA) {
 582                         result = decompress_exec(bprm, fpos, (char *) datapos,
 583                                                  data_len + (relocs * sizeof(unsigned long)), 0);
 584                 } else
 585 #endif
 586                 {
 587                         result = bprm->file->f_op->read(bprm->file, (char *) datapos,
 588                                         data_len + (relocs * sizeof(unsigned long)), &fpos);
 589                 }
 590                 if (result >= (unsigned long)-4096) {
 591                         printk("Unable to read data+bss, errno %d\n", (int)-result);
 592                         do_munmap(current->mm, textpos, text_len);
 593                         do_munmap(current->mm, realdatastart, data_len + extra);
 594                         ret = result;
 595                         goto err;
 596                 }
 597
 598                 reloc = (unsigned long *) (datapos+(ntohl(hdr->reloc_start)-text_len));
 599                 memp = realdatastart;
 600                 memp_size = len;
 601         } else {
 602
 603                 len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
 604                 len = PAGE_ALIGN(len);
 605                 down_write(&current->mm->mmap_sem);
 606                 textpos = do_mmap(0, 0, len,
 607                         PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
 608                 up_write(&current->mm->mmap_sem);
 609
 610                 if (!textpos  || textpos >= (unsigned long) -4096) {
 611                         if (!textpos)
 612                                 textpos = (unsigned long) -ENOMEM;
 613                         printk("Unable to allocate RAM for process text/data, errno %d\n",
 614                                         (int)-textpos);
 615                         ret = textpos;
 616                         goto err;
 617                 }
 618
 619                 realdatastart = textpos + ntohl(hdr->data_start);
 620                 datapos = ALIGN(realdatastart +
 621                                 MAX_SHARED_LIBS * sizeof(unsigned long),
 622                                 FLAT_DATA_ALIGN);
 623
 624                 reloc = (unsigned long *)
 625                         (datapos + (ntohl(hdr->reloc_start) - text_len));
 626                 memp = textpos;
 627                 memp_size = len;
 628 #ifdef CONFIG_BINFMT_ZFLAT
 629                 /*
 630                  * load it all in and treat it like a RAM load from now on
 631                  */
 632                 if (flags & FLAT_FLAG_GZIP) {
 633                         result = decompress_exec(bprm, sizeof (struct flat_hdr),
 634                                          (((char *) textpos) + sizeof (struct flat_hdr)),
 635                                          (text_len + data_len + (relocs * sizeof(unsigned long))
 636                                                   - sizeof (struct flat_hdr)),
 637                                          0);
 638                         memmove((void *) datapos, (void *) realdatastart,
 639                                         data_len + (relocs * sizeof(unsigned long)));
 640                 } else if (flags & FLAT_FLAG_GZDATA) {
 641                         fpos = 0;
 642                         result = bprm->file->f_op->read(bprm->file,
 643                                         (char *) textpos, text_len, &fpos);
 644                         if (result < (unsigned long) -4096)
 645                                 result = decompress_exec(bprm, text_len, (char *) datapos,
 646                                                  data_len + (relocs * sizeof(unsigned long)), 0);
 647                 }
 648                 else
 649 #endif
 650                 {
 651                         fpos = 0;
 652                         result = bprm->file->f_op->read(bprm->file,
 653                                         (char *) textpos, text_len, &fpos);
 654                         if (result < (unsigned long) -4096) {
 655                                 fpos = ntohl(hdr->data_start);
 656                                 result = bprm->file->f_op->read(bprm->file, (char *) datapos,
 657                                         data_len + (relocs * sizeof(unsigned long)), &fpos);
 658                         }
 659                 }
 660                 if (result >= (unsigned long)-4096) {
 661                         printk("Unable to read code+data+bss, errno %d\n",(int)-result);
 662                         do_munmap(current->mm, textpos, text_len + data_len + extra +
 663                                 MAX_SHARED_LIBS * sizeof(unsigned long));
 664                         ret = result;
 665                         goto err;
 666                 }
 667         }
 668
 669         if (flags & FLAT_FLAG_KTRACE)
 670                 printk("Mapping is %x, Entry point is %x, data_start is %x\n",
 671                         (int)textpos, 0x00ffffff&ntohl(hdr->entry), ntohl(hdr->data_start));
 672
 673         /* The main program needs a little extra setup in the task structure */
 674         start_code = textpos + sizeof (struct flat_hdr);
 675         end_code = textpos + text_len;
 676         if (id == 0) {
 677                 current->mm->start_code = start_code;
 678                 current->mm->end_code = end_code;
 679                 current->mm->start_data = datapos;
 680                 current->mm->end_data = datapos + data_len;
 681                 /*
 682                  * set up the brk stuff, uses any slack left in data/bss/stack
 683                  * allocation.  We put the brk after the bss (between the bss
 684                  * and stack) like other platforms.
 685                  * Userspace code relies on the stack pointer starting out at
 686                  * an address right at the end of a page.
 687                  */
 688                 current->mm->start_brk = datapos + data_len + bss_len;
 689                 current->mm->brk = (current->mm->start_brk + 3) & ~3;
 690                 current->mm->context.end_brk = memp + memp_size - stack_len;
 691         }
 692
 693         if (flags & FLAT_FLAG_KTRACE)
 694                 printk("%s %s: TEXT=%x-%x DATA=%x-%x BSS=%x-%x\n",
 695                         id ? "Lib" : "Load", bprm->filename,
 696                         (int) start_code, (int) end_code,
 697                         (int) datapos,
 698                         (int) (datapos + data_len),
 699                         (int) (datapos + data_len),
 700                         (int) (((datapos + data_len + bss_len) + 3) & ~3));
 701
 702         text_len -= sizeof(struct flat_hdr); /* the real code len */
 703
 704         /* Store the current module values into the global library structure */
 705         libinfo->lib_list[id].start_code = start_code;
 706         libinfo->lib_list[id].start_data = datapos;
 707         libinfo->lib_list[id].start_brk = datapos + data_len + bss_len;
 708         libinfo->lib_list[id].text_len = text_len;
 709         libinfo->lib_list[id].loaded = 1;
 710         libinfo->lib_list[id].entry = (0x00ffffff & ntohl(hdr->entry)) + textpos;
 711         libinfo->lib_list[id].build_date = ntohl(hdr->build_date);
 712
 713         /*
 714          * We just load the allocations into some temporary memory to
 715          * help simplify all this mumbo jumbo
 716          *
 717          * We've got two different sections of relocation entries.
 718          * The first is the GOT which resides at the begining of the data segment
 719          * and is terminated with a -1.  This one can be relocated in place.
 720          * The second is the extra relocation entries tacked after the image's
 721          * data segment. These require a little more processing as the entry is
 722          * really an offset into the image which contains an offset into the
 723          * image.
 724          */
 725         if (flags & FLAT_FLAG_GOTPIC) {
 726                 for (rp = (unsigned long *)datapos; *rp != 0xffffffff; rp++) {
 727                         unsigned long addr;
 728                         if (*rp) {
 729                                 addr = calc_reloc(*rp, libinfo, id, 0);
 730                                 if (addr == RELOC_FAILED) {
 731                                         ret = -ENOEXEC;
 732                                         goto err;
 733                                 }
 734                                 *rp = addr;
 735                         }
 736                 }
 737         }
 738
 739         /*
 740          * Now run through the relocation entries.
 741          * We've got to be careful here as C++ produces relocatable zero
 742          * entries in the constructor and destructor tables which are then
 743          * tested for being not zero (which will always occur unless we're
 744          * based from address zero).  This causes an endless loop as __start
 745          * is at zero.  The solution used is to not relocate zero addresses.
 746          * This has the negative side effect of not allowing a global data
 747          * reference to be statically initialised to _stext (I've moved
 748          * __start to address 4 so that is okay).
 749          */
 750         if (rev > OLD_FLAT_VERSION) {
 751                 unsigned long persistent = 0;
 752                 for (i=0; i < relocs; i++) {
 753                         unsigned long addr, relval;
 754
 755                         /* Get the address of the pointer to be
 756                            relocated (of course, the address has to be
 757                            relocated first).  */
 758                         relval = ntohl(reloc[i]);
 759                         if (flat_set_persistent (relval, &persistent))
 760                                 continue;
 761                         addr = flat_get_relocate_addr(relval);
 762                         rp = (unsigned long *) calc_reloc(addr, libinfo, id, 1);
 763                         if (rp == (unsigned long *)RELOC_FAILED) {
 764                                 ret = -ENOEXEC;
 765                                 goto err;
 766                         }
 767
 768                         /* Get the pointer's value.  */
 769                         addr = flat_get_addr_from_rp(rp, relval, flags,
 770                                                         &persistent);
 771                         if (addr != 0) {
 772                                 /*
 773                                  * Do the relocation.  PIC relocs in the data section are
 774                                  * already in target order
 775                                  */
 776                                 if ((flags & FLAT_FLAG_GOTPIC) == 0)
 777                                         addr = ntohl(addr);
 778                                 addr = calc_reloc(addr, libinfo, id, 0);
 779                                 if (addr == RELOC_FAILED) {
 780                                         ret = -ENOEXEC;
 781                                         goto err;
 782                                 }
 783
 784                                 /* Write back the relocated pointer.  */
 785                                 flat_put_addr_at_rp(rp, addr, relval);
 786                         }
 787                 }
 788         } else {
 789                 for (i=0; i < relocs; i++)
 790                         old_reloc(ntohl(reloc[i]));
 791         }
 792
 793         flush_icache_range(start_code, end_code);
 794
 795         /* zero the BSS,  BRK and stack areas */
 796         memset((void*)(datapos + data_len), 0, bss_len +
 797                         (memp + memp_size - stack_len -         /* end brk */
 798                         libinfo->lib_list[id].start_brk) +      /* start brk */
 799                         stack_len);
 800
 801         return 0;
 802 err:
 803         return ret;
 804 }
 805
 806
 807 /****************************************************************************/
 808 #ifdef CONFIG_BINFMT_SHARED_FLAT
 809
 810 /*
 811  * Load a shared library into memory.  The library gets its own data
 812  * segment (including bss) but not argv/argc/environ.
 813  */
 814
 815 static int load_flat_shared_library(int id, struct lib_info *libs)
 816 {
 817         struct linux_binprm bprm;
 818         int res;
 819         char buf[16];
 820
 821         /* Create the file name */
 822         sprintf(buf, "/lib/lib%d.so", id);
 823
 824         /* Open the file up */
 825         bprm.filename = buf;
 826         bprm.file = open_exec(bprm.filename);
 827         res = PTR_ERR(bprm.file);
 828         if (IS_ERR(bprm.file))
 829                 return res;
 830
 831         bprm.cred = prepare_exec_creds();
 832         res = -ENOMEM;
 833         if (!bprm.cred)
 834                 goto out;
 835
 836         res = prepare_binprm(&bprm);
 837
 838         if (res <= (unsigned long)-4096)
 839                 res = load_flat_file(&bprm, libs, id, NULL);
 840
 841         abort_creds(bprm.cred);
 842
 843 out:
 844         allow_write_access(bprm.file);
 845         fput(bprm.file);
 846
 847         return(res);
 848 }
 849
 850 #endif /* CONFIG_BINFMT_SHARED_FLAT */
 851 /****************************************************************************/
 852
 853 /*
 854  * These are the functions used to load flat style executables and shared
 855  * libraries.  There is no binary dependent code anywhere else.
 856  */
 857
 858 static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 859 {
 860         struct lib_info libinfo;
 861         unsigned long p = bprm->p;
 862         unsigned long stack_len;
 863         unsigned long start_addr;
 864         unsigned long *sp;
 865         int res;
 866         int i, j;
 867
 868         memset(&libinfo, 0, sizeof(libinfo));
 869         /*
 870          * We have to add the size of our arguments to our stack size
 871          * otherwise it's too easy for users to create stack overflows
 872          * by passing in a huge argument list.  And yes,  we have to be
 873          * pedantic and include space for the argv/envp array as it may have
 874          * a lot of entries.
 875          */
 876 #define TOP_OF_ARGS (PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *))
 877         stack_len = TOP_OF_ARGS - bprm->p;             /* the strings */
 878         stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
 879         stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
 880         stack_len += FLAT_DATA_ALIGN - 1;  /* reserve for upcoming alignment */
 881
 882         res = load_flat_file(bprm, &libinfo, 0, &stack_len);
 883         if (res > (unsigned long)-4096)
 884                 return res;
 885
 886         /* Update data segment pointers for all libraries */
 887         for (i=0; i<MAX_SHARED_LIBS; i++)
 888                 if (libinfo.lib_list[i].loaded)
 889                         for (j=0; j<MAX_SHARED_LIBS; j++)
 890                                 (-(j+1))[(unsigned long *)(libinfo.lib_list[i].start_data)] =
 891                                         (libinfo.lib_list[j].loaded)?
 892                                                 libinfo.lib_list[j].start_data:UNLOADED_LIB;
 893
 894         install_exec_creds(bprm);
 895         current->flags &= ~PF_FORKNOEXEC;
 896
 897         set_binfmt(&flat_format);
 898
 899         p = ((current->mm->context.end_brk + stack_len + 3) & ~3) - 4;
 900         DBG_FLT("p=%x\n", (int)p);
 901
 902         /* copy the arg pages onto the stack, this could be more efficient :-) */
 903         for (i = TOP_OF_ARGS - 1; i >= bprm->p; i--)
 904                 * (char *) --p =
 905                         ((char *) page_address(bprm->page[i/PAGE_SIZE]))[i % PAGE_SIZE];
 906
 907         sp = (unsigned long *) create_flat_tables(p, bprm);
 908
 909         /* Fake some return addresses to ensure the call chain will
 910          * initialise library in order for us.  We are required to call
 911          * lib 1 first, then 2, ... and finally the main program (id 0).
 912          */
 913         start_addr = libinfo.lib_list[0].entry;
 914
 915 #ifdef CONFIG_BINFMT_SHARED_FLAT
 916         for (i = MAX_SHARED_LIBS-1; i>0; i--) {
 917                 if (libinfo.lib_list[i].loaded) {
 918                         /* Push previos first to call address */
 919                         --sp;   put_user(start_addr, sp);
 920                         start_addr = libinfo.lib_list[i].entry;
 921                 }
 922         }
 923 #endif
 924
 925         /* Stash our initial stack pointer into the mm structure */
 926         current->mm->start_stack = (unsigned long )sp;
 927
 928 #ifdef FLAT_PLAT_INIT
 929         FLAT_PLAT_INIT(regs);
 930 #endif
 931         DBG_FLT("start_thread(regs=0x%x, entry=0x%x, start_stack=0x%x)\n",
 932                 (int)regs, (int)start_addr, (int)current->mm->start_stack);
 933
 934         start_thread(regs, start_addr, current->mm->start_stack);
 935
 936         return 0;
 937 }
 938
 939 /****************************************************************************/
 940
 941 static int __init init_flat_binfmt(void)
 942 {
 943         return register_binfmt(&flat_format);
 944 }
 945
 946 /****************************************************************************/
 947
 948 core_initcall(init_flat_binfmt);
 949
 950 /****************************************************************************/