2 * High-level sync()-related operations
5 #include <linux/kernel.h>
6 #include <linux/file.h>
8 #include <linux/module.h>
9 #include <linux/sched.h>
10 #include <linux/writeback.h>
11 #include <linux/syscalls.h>
12 #include <linux/linkage.h>
13 #include <linux/pagemap.h>
14 #include <linux/quotaops.h>
15 #include <linux/buffer_head.h>
18 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
19 SYNC_FILE_RANGE_WAIT_AFTER)
22 * Do the filesystem syncing work. For simple filesystems
23 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
24 * submit IO for these buffers via __sync_blockdev(). This also speeds up the
25 * wait == 1 case since in that case write_inode() functions do
26 * sync_dirty_buffer() and thus effectively write one block at a time.
28 static int __sync_filesystem(struct super_block
*sb
, int wait
)
31 * This should be safe, as we require bdi backing to actually
32 * write out data in the first place
37 /* Avoid doing twice syncing and cache pruning for quota sync */
39 writeout_quota_sb(sb
, -1);
40 writeback_inodes_sb(sb
);
42 sync_quota_sb(sb
, -1);
45 if (sb
->s_op
->sync_fs
)
46 sb
->s_op
->sync_fs(sb
, wait
);
47 return __sync_blockdev(sb
->s_bdev
, wait
);
51 * Write out and wait upon all dirty data associated with this
52 * superblock. Filesystem data as well as the underlying block
53 * device. Takes the superblock lock.
55 int sync_filesystem(struct super_block
*sb
)
60 * We need to be protected against the filesystem going from
61 * r/o to r/w or vice versa.
63 WARN_ON(!rwsem_is_locked(&sb
->s_umount
));
66 * No point in syncing out anything if the filesystem is read-only.
68 if (sb
->s_flags
& MS_RDONLY
)
71 ret
= __sync_filesystem(sb
, 0);
74 return __sync_filesystem(sb
, 1);
76 EXPORT_SYMBOL_GPL(sync_filesystem
);
79 * Sync all the data for all the filesystems (called by sys_sync() and
82 * This operation is careful to avoid the livelock which could easily happen
83 * if two or more filesystems are being continuously dirtied. s_need_sync
84 * is used only here. We set it against all filesystems and then clear it as
85 * we sync them. So redirtied filesystems are skipped.
87 * But if process A is currently running sync_filesystems and then process B
88 * calls sync_filesystems as well, process B will set all the s_need_sync
89 * flags again, which will cause process A to resync everything. Fix that with
92 static void sync_filesystems(int wait
)
94 struct super_block
*sb
;
95 static DEFINE_MUTEX(mutex
);
97 mutex_lock(&mutex
); /* Could be down_interruptible */
99 list_for_each_entry(sb
, &super_blocks
, s_list
)
103 list_for_each_entry(sb
, &super_blocks
, s_list
) {
104 if (!sb
->s_need_sync
)
108 spin_unlock(&sb_lock
);
110 down_read(&sb
->s_umount
);
111 if (!(sb
->s_flags
& MS_RDONLY
) && sb
->s_root
&& sb
->s_bdi
)
112 __sync_filesystem(sb
, wait
);
113 up_read(&sb
->s_umount
);
115 /* restart only when sb is no longer on the list */
117 if (__put_super_and_need_restart(sb
))
120 spin_unlock(&sb_lock
);
121 mutex_unlock(&mutex
);
125 * sync everything. Start out by waking pdflush, because that writes back
126 * all queues in parallel.
128 SYSCALL_DEFINE0(sync
)
130 wakeup_flusher_threads(0);
133 if (unlikely(laptop_mode
))
134 laptop_sync_completion();
138 static void do_sync_work(struct work_struct
*work
)
141 * Sync twice to reduce the possibility we skipped some inodes / pages
142 * because they were temporarily locked
146 printk("Emergency Sync complete\n");
150 void emergency_sync(void)
152 struct work_struct
*work
;
154 work
= kmalloc(sizeof(*work
), GFP_ATOMIC
);
156 INIT_WORK(work
, do_sync_work
);
162 * Generic function to fsync a file.
164 * filp may be NULL if called via the msync of a vma.
166 int file_fsync(struct file
*filp
, struct dentry
*dentry
, int datasync
)
168 struct inode
* inode
= dentry
->d_inode
;
169 struct super_block
* sb
;
172 /* sync the inode to buffers */
173 ret
= write_inode_now(inode
, 0);
175 /* sync the superblock to buffers */
177 if (sb
->s_dirt
&& sb
->s_op
->write_super
)
178 sb
->s_op
->write_super(sb
);
180 /* .. finally sync the buffers to disk */
181 err
= sync_blockdev(sb
->s_bdev
);
188 * vfs_fsync_range - helper to sync a range of data & metadata to disk
189 * @file: file to sync
190 * @dentry: dentry of @file
191 * @start: offset in bytes of the beginning of data range to sync
192 * @end: offset in bytes of the end of data range (inclusive)
193 * @datasync: perform only datasync
195 * Write back data in range @start..@end and metadata for @file to disk. If
196 * @datasync is set only metadata needed to access modified file data is
199 * In case this function is called from nfsd @file may be %NULL and
200 * only @dentry is set. This can only happen when the filesystem
201 * implements the export_operations API.
203 int vfs_fsync_range(struct file
*file
, struct dentry
*dentry
, loff_t start
,
204 loff_t end
, int datasync
)
206 const struct file_operations
*fop
;
207 struct address_space
*mapping
;
211 * Get mapping and operations from the file in case we have
212 * as file, or get the default values for them in case we
213 * don't have a struct file available. Damn nfsd..
216 mapping
= file
->f_mapping
;
219 mapping
= dentry
->d_inode
->i_mapping
;
220 fop
= dentry
->d_inode
->i_fop
;
223 if (!fop
|| !fop
->fsync
) {
228 ret
= filemap_write_and_wait_range(mapping
, start
, end
);
231 * We need to protect against concurrent writers, which could cause
232 * livelocks in fsync_buffers_list().
234 mutex_lock(&mapping
->host
->i_mutex
);
235 err
= fop
->fsync(file
, dentry
, datasync
);
238 mutex_unlock(&mapping
->host
->i_mutex
);
243 EXPORT_SYMBOL(vfs_fsync_range
);
246 * vfs_fsync - perform a fsync or fdatasync on a file
247 * @file: file to sync
248 * @dentry: dentry of @file
249 * @datasync: only perform a fdatasync operation
251 * Write back data and metadata for @file to disk. If @datasync is
252 * set only metadata needed to access modified file data is written.
254 * In case this function is called from nfsd @file may be %NULL and
255 * only @dentry is set. This can only happen when the filesystem
256 * implements the export_operations API.
258 int vfs_fsync(struct file
*file
, struct dentry
*dentry
, int datasync
)
260 return vfs_fsync_range(file
, dentry
, 0, LLONG_MAX
, datasync
);
262 EXPORT_SYMBOL(vfs_fsync
);
264 static int do_fsync(unsigned int fd
, int datasync
)
271 ret
= vfs_fsync(file
, file
->f_path
.dentry
, datasync
);
277 SYSCALL_DEFINE1(fsync
, unsigned int, fd
)
279 return do_fsync(fd
, 0);
282 SYSCALL_DEFINE1(fdatasync
, unsigned int, fd
)
284 return do_fsync(fd
, 1);
288 * generic_write_sync - perform syncing after a write if file / inode is sync
289 * @file: file to which the write happened
290 * @pos: offset where the write started
291 * @count: length of the write
293 * This is just a simple wrapper about our general syncing function.
295 int generic_write_sync(struct file
*file
, loff_t pos
, loff_t count
)
297 if (!(file
->f_flags
& O_SYNC
) && !IS_SYNC(file
->f_mapping
->host
))
299 return vfs_fsync_range(file
, file
->f_path
.dentry
, pos
,
302 EXPORT_SYMBOL(generic_write_sync
);
305 * sys_sync_file_range() permits finely controlled syncing over a segment of
306 * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
307 * zero then sys_sync_file_range() will operate from offset out to EOF.
311 * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
312 * before performing the write.
314 * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
315 * range which are not presently under writeback. Note that this may block for
316 * significant periods due to exhaustion of disk request structures.
318 * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
319 * after performing the write.
321 * Useful combinations of the flag bits are:
323 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
324 * in the range which were dirty on entry to sys_sync_file_range() are placed
325 * under writeout. This is a start-write-for-data-integrity operation.
327 * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
328 * are not presently under writeout. This is an asynchronous flush-to-disk
329 * operation. Not suitable for data integrity operations.
331 * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
332 * completion of writeout of all pages in the range. This will be used after an
333 * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
334 * for that operation to complete and to return the result.
336 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
337 * a traditional sync() operation. This is a write-for-data-integrity operation
338 * which will ensure that all pages in the range which were dirty on entry to
339 * sys_sync_file_range() are committed to disk.
342 * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
343 * I/O errors or ENOSPC conditions and will return those to the caller, after
344 * clearing the EIO and ENOSPC flags in the address_space.
346 * It should be noted that none of these operations write out the file's
347 * metadata. So unless the application is strictly performing overwrites of
348 * already-instantiated disk blocks, there are no guarantees here that the data
349 * will be available after a crash.
351 SYSCALL_DEFINE(sync_file_range
)(int fd
, loff_t offset
, loff_t nbytes
,
356 loff_t endbyte
; /* inclusive */
361 if (flags
& ~VALID_FLAGS
)
364 endbyte
= offset
+ nbytes
;
368 if ((s64
)endbyte
< 0)
370 if (endbyte
< offset
)
373 if (sizeof(pgoff_t
) == 4) {
374 if (offset
>= (0x100000000ULL
<< PAGE_CACHE_SHIFT
)) {
376 * The range starts outside a 32 bit machine's
377 * pagecache addressing capabilities. Let it "succeed"
382 if (endbyte
>= (0x100000000ULL
<< PAGE_CACHE_SHIFT
)) {
393 endbyte
--; /* inclusive */
396 file
= fget_light(fd
, &fput_needed
);
400 i_mode
= file
->f_path
.dentry
->d_inode
->i_mode
;
402 if (!S_ISREG(i_mode
) && !S_ISBLK(i_mode
) && !S_ISDIR(i_mode
) &&
406 ret
= do_sync_mapping_range(file
->f_mapping
, offset
, endbyte
, flags
);
408 fput_light(file
, fput_needed
);
412 #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
413 asmlinkage
long SyS_sync_file_range(long fd
, loff_t offset
, loff_t nbytes
,
416 return SYSC_sync_file_range((int) fd
, offset
, nbytes
,
417 (unsigned int) flags
);
419 SYSCALL_ALIAS(sys_sync_file_range
, SyS_sync_file_range
);
422 /* It would be nice if people remember that not all the world's an i386
423 when they introduce new system calls */
424 SYSCALL_DEFINE(sync_file_range2
)(int fd
, unsigned int flags
,
425 loff_t offset
, loff_t nbytes
)
427 return sys_sync_file_range(fd
, offset
, nbytes
, flags
);
429 #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
430 asmlinkage
long SyS_sync_file_range2(long fd
, long flags
,
431 loff_t offset
, loff_t nbytes
)
433 return SYSC_sync_file_range2((int) fd
, (unsigned int) flags
,
436 SYSCALL_ALIAS(sys_sync_file_range2
, SyS_sync_file_range2
);
440 * `endbyte' is inclusive
442 int do_sync_mapping_range(struct address_space
*mapping
, loff_t offset
,
443 loff_t endbyte
, unsigned int flags
)
453 if (flags
& SYNC_FILE_RANGE_WAIT_BEFORE
) {
454 ret
= wait_on_page_writeback_range(mapping
,
455 offset
>> PAGE_CACHE_SHIFT
,
456 endbyte
>> PAGE_CACHE_SHIFT
);
461 if (flags
& SYNC_FILE_RANGE_WRITE
) {
462 ret
= __filemap_fdatawrite_range(mapping
, offset
, endbyte
,
468 if (flags
& SYNC_FILE_RANGE_WAIT_AFTER
) {
469 ret
= wait_on_page_writeback_range(mapping
,
470 offset
>> PAGE_CACHE_SHIFT
,
471 endbyte
>> PAGE_CACHE_SHIFT
);
476 EXPORT_SYMBOL_GPL(do_sync_mapping_range
);