1 /*******************************************************************************
3 * Module Name: rscalc - Calculate stream and list lengths
5 ******************************************************************************/
8 * Copyright (C) 2000 - 2006, R. Byron Moore
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
44 #include <acpi/acpi.h>
45 #include <acpi/acresrc.h>
46 #include <acpi/amlcode.h>
47 #include <acpi/acnamesp.h>
49 #define _COMPONENT ACPI_RESOURCES
50 ACPI_MODULE_NAME("rscalc")
52 /* Local prototypes */
53 static u8
acpi_rs_count_set_bits(u16 bit_field
);
56 acpi_rs_struct_option_length(struct acpi_resource_source
*resource_source
);
59 acpi_rs_stream_option_length(u32 resource_length
, u32 minimum_total_length
);
61 /*******************************************************************************
63 * FUNCTION: acpi_rs_count_set_bits
65 * PARAMETERS: bit_field - Field in which to count bits
67 * RETURN: Number of bits set within the field
69 * DESCRIPTION: Count the number of bits set in a resource field. Used for
70 * (Short descriptor) interrupt and DMA lists.
72 ******************************************************************************/
74 static u8
acpi_rs_count_set_bits(u16 bit_field
)
78 ACPI_FUNCTION_ENTRY();
80 for (bits_set
= 0; bit_field
; bits_set
++) {
81 /* Zero the least significant bit that is set */
83 bit_field
&= (bit_field
- 1);
89 /*******************************************************************************
91 * FUNCTION: acpi_rs_struct_option_length
93 * PARAMETERS: resource_source - Pointer to optional descriptor field
97 * DESCRIPTION: Common code to handle optional resource_source_index and
98 * resource_source fields in some Large descriptors. Used during
99 * list-to-stream conversion
101 ******************************************************************************/
103 static acpi_rs_length
104 acpi_rs_struct_option_length(struct acpi_resource_source
*resource_source
)
106 ACPI_FUNCTION_ENTRY();
109 * If the resource_source string is valid, return the size of the string
110 * (string_length includes the NULL terminator) plus the size of the
111 * resource_source_index (1).
113 if (resource_source
->string_ptr
) {
114 return ((acpi_rs_length
) (resource_source
->string_length
+ 1));
120 /*******************************************************************************
122 * FUNCTION: acpi_rs_stream_option_length
124 * PARAMETERS: resource_length - Length from the resource header
125 * minimum_total_length - Minimum length of this resource, before
126 * any optional fields. Includes header size
128 * RETURN: Length of optional string (0 if no string present)
130 * DESCRIPTION: Common code to handle optional resource_source_index and
131 * resource_source fields in some Large descriptors. Used during
132 * stream-to-list conversion
134 ******************************************************************************/
137 acpi_rs_stream_option_length(u32 resource_length
,
138 u32 minimum_aml_resource_length
)
140 u32 string_length
= 0;
142 ACPI_FUNCTION_ENTRY();
145 * The resource_source_index and resource_source are optional elements of some
146 * Large-type resource descriptors.
150 * If the length of the actual resource descriptor is greater than the ACPI
151 * spec-defined minimum length, it means that a resource_source_index exists
152 * and is followed by a (required) null terminated string. The string length
153 * (including the null terminator) is the resource length minus the minimum
154 * length, minus one byte for the resource_source_index itself.
156 if (resource_length
> minimum_aml_resource_length
) {
157 /* Compute the length of the optional string */
160 resource_length
- minimum_aml_resource_length
- 1;
163 /* Round up length to 32 bits for internal structure alignment */
165 return (ACPI_ROUND_UP_to_32_bITS(string_length
));
168 /*******************************************************************************
170 * FUNCTION: acpi_rs_get_aml_length
172 * PARAMETERS: Resource - Pointer to the resource linked list
173 * size_needed - Where the required size is returned
177 * DESCRIPTION: Takes a linked list of internal resource descriptors and
178 * calculates the size buffer needed to hold the corresponding
179 * external resource byte stream.
181 ******************************************************************************/
184 acpi_rs_get_aml_length(struct acpi_resource
* resource
, acpi_size
* size_needed
)
186 acpi_size aml_size_needed
= 0;
187 acpi_rs_length total_size
;
189 ACPI_FUNCTION_TRACE("rs_get_aml_length");
191 /* Traverse entire list of internal resource descriptors */
194 /* Validate the descriptor type */
196 if (resource
->type
> ACPI_RESOURCE_TYPE_MAX
) {
197 return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE
);
200 /* Get the base size of the (external stream) resource descriptor */
202 total_size
= acpi_gbl_aml_resource_sizes
[resource
->type
];
205 * Augment the base size for descriptors with optional and/or
206 * variable-length fields
208 switch (resource
->type
) {
209 case ACPI_RESOURCE_TYPE_VENDOR
:
211 * Vendor Defined Resource:
212 * For a Vendor Specific resource, if the Length is between 1 and 7
213 * it will be created as a Small Resource data type, otherwise it
214 * is a Large Resource data type.
216 if (resource
->data
.vendor
.byte_length
> 7) {
217 /* Base size of a Large resource descriptor */
220 sizeof(struct aml_resource_large_header
);
223 /* Add the size of the vendor-specific data */
225 total_size
= (acpi_rs_length
)
226 (total_size
+ resource
->data
.vendor
.byte_length
);
229 case ACPI_RESOURCE_TYPE_END_TAG
:
232 * We are done -- return the accumulated total size.
234 *size_needed
= aml_size_needed
+ total_size
;
238 return_ACPI_STATUS(AE_OK
);
240 case ACPI_RESOURCE_TYPE_ADDRESS16
:
242 * 16-Bit Address Resource:
243 * Add the size of the optional resource_source info
245 total_size
= (acpi_rs_length
)
247 acpi_rs_struct_option_length(&resource
->data
.
252 case ACPI_RESOURCE_TYPE_ADDRESS32
:
254 * 32-Bit Address Resource:
255 * Add the size of the optional resource_source info
257 total_size
= (acpi_rs_length
)
259 acpi_rs_struct_option_length(&resource
->data
.
264 case ACPI_RESOURCE_TYPE_ADDRESS64
:
266 * 64-Bit Address Resource:
267 * Add the size of the optional resource_source info
269 total_size
= (acpi_rs_length
)
271 acpi_rs_struct_option_length(&resource
->data
.
276 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ
:
278 * Extended IRQ Resource:
279 * Add the size of each additional optional interrupt beyond the
280 * required 1 (4 bytes for each u32 interrupt number)
282 total_size
= (acpi_rs_length
)
284 ((resource
->data
.extended_irq
.interrupt_count
-
286 /* Add the size of the optional resource_source info */
287 acpi_rs_struct_option_length(&resource
->data
.
296 /* Update the total */
298 aml_size_needed
+= total_size
;
300 /* Point to the next object */
303 ACPI_ADD_PTR(struct acpi_resource
, resource
,
307 /* Did not find an end_tag resource descriptor */
309 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG
);
312 /*******************************************************************************
314 * FUNCTION: acpi_rs_get_list_length
316 * PARAMETERS: aml_buffer - Pointer to the resource byte stream
317 * aml_buffer_length - Size of aml_buffer
318 * size_needed - Where the size needed is returned
322 * DESCRIPTION: Takes an external resource byte stream and calculates the size
323 * buffer needed to hold the corresponding internal resource
324 * descriptor linked list.
326 ******************************************************************************/
329 acpi_rs_get_list_length(u8
* aml_buffer
,
330 u32 aml_buffer_length
, acpi_size
* size_needed
)
338 u32 extra_struct_bytes
;
340 u8 minimum_aml_resource_length
;
342 ACPI_FUNCTION_TRACE("rs_get_list_length");
344 end_aml
= aml_buffer
+ aml_buffer_length
;
346 /* Walk the list of AML resource descriptors */
348 while (aml_buffer
< end_aml
) {
349 /* Validate the Resource Type and Resource Length */
351 status
= acpi_ut_validate_resource(aml_buffer
, &resource_index
);
352 if (ACPI_FAILURE(status
)) {
353 return_ACPI_STATUS(status
);
356 /* Get the resource length and base (minimum) AML size */
358 resource_length
= acpi_ut_get_resource_length(aml_buffer
);
359 minimum_aml_resource_length
=
360 acpi_gbl_resource_aml_sizes
[resource_index
];
363 * Augment the size for descriptors with optional
364 * and/or variable length fields
366 extra_struct_bytes
= 0;
368 aml_buffer
+ acpi_ut_get_resource_header_length(aml_buffer
);
370 switch (acpi_ut_get_resource_type(aml_buffer
)) {
371 case ACPI_RESOURCE_NAME_IRQ
:
374 * Get the number of bits set in the 16-bit IRQ mask
376 ACPI_MOVE_16_TO_16(&temp16
, buffer
);
377 extra_struct_bytes
= acpi_rs_count_set_bits(temp16
);
380 case ACPI_RESOURCE_NAME_DMA
:
383 * Get the number of bits set in the 8-bit DMA mask
385 extra_struct_bytes
= acpi_rs_count_set_bits(*buffer
);
388 case ACPI_RESOURCE_NAME_VENDOR_SMALL
:
391 * Ensure a 32-bit boundary for the structure
394 ACPI_ROUND_UP_to_32_bITS(resource_length
);
397 case ACPI_RESOURCE_NAME_END_TAG
:
399 * End Tag: This is the normal exit, add size of end_tag
401 *size_needed
= buffer_size
+ ACPI_RS_SIZE_MIN
;
402 return_ACPI_STATUS(AE_OK
);
404 case ACPI_RESOURCE_NAME_VENDOR_LARGE
:
407 * Add vendor data and ensure a 32-bit boundary for the structure
410 ACPI_ROUND_UP_to_32_bITS(resource_length
);
413 case ACPI_RESOURCE_NAME_ADDRESS32
:
414 case ACPI_RESOURCE_NAME_ADDRESS16
:
416 * 32-Bit or 16-bit Address Resource:
417 * Add the size of any optional data (resource_source)
420 acpi_rs_stream_option_length(resource_length
,
421 minimum_aml_resource_length
);
424 case ACPI_RESOURCE_NAME_EXTENDED_IRQ
:
427 * Point past the interrupt_vector_flags to get the
428 * interrupt_table_length.
434 * Add 4 bytes for each additional interrupt. Note: at
435 * least one interrupt is required and is included in
436 * the minimum descriptor size
438 ((*buffer
- 1) * sizeof(u32
)) +
439 /* Add the size of any optional data (resource_source) */
440 acpi_rs_stream_option_length(resource_length
-
442 minimum_aml_resource_length
);
445 case ACPI_RESOURCE_NAME_ADDRESS64
:
447 * 64-Bit Address Resource:
448 * Add the size of any optional data (resource_source)
449 * Ensure a 64-bit boundary for the structure
452 ACPI_ROUND_UP_to_64_bITS
453 (acpi_rs_stream_option_length
454 (resource_length
, minimum_aml_resource_length
));
461 /* Update the required buffer size for the internal descriptor structs */
463 temp16
= (u16
) (acpi_gbl_resource_struct_sizes
[resource_index
] +
465 buffer_size
+= (u32
) ACPI_ROUND_UP_TO_NATIVE_WORD(temp16
);
468 * Point to the next resource within the stream
469 * using the size of the header plus the length contained in the header
471 aml_buffer
+= acpi_ut_get_descriptor_length(aml_buffer
);
474 /* Did not find an end_tag resource descriptor */
476 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG
);
479 /*******************************************************************************
481 * FUNCTION: acpi_rs_get_pci_routing_table_length
483 * PARAMETERS: package_object - Pointer to the package object
484 * buffer_size_needed - u32 pointer of the size buffer
485 * needed to properly return the
490 * DESCRIPTION: Given a package representing a PCI routing table, this
491 * calculates the size of the corresponding linked list of
494 ******************************************************************************/
497 acpi_rs_get_pci_routing_table_length(union acpi_operand_object
*package_object
,
498 acpi_size
* buffer_size_needed
)
500 u32 number_of_elements
;
501 acpi_size temp_size_needed
= 0;
502 union acpi_operand_object
**top_object_list
;
504 union acpi_operand_object
*package_element
;
505 union acpi_operand_object
**sub_object_list
;
509 ACPI_FUNCTION_TRACE("rs_get_pci_routing_table_length");
511 number_of_elements
= package_object
->package
.count
;
514 * Calculate the size of the return buffer.
515 * The base size is the number of elements * the sizes of the
516 * structures. Additional space for the strings is added below.
517 * The minus one is to subtract the size of the u8 Source[1]
518 * member because it is added below.
520 * But each PRT_ENTRY structure has a pointer to a string and
521 * the size of that string must be found.
523 top_object_list
= package_object
->package
.elements
;
525 for (index
= 0; index
< number_of_elements
; index
++) {
526 /* Dereference the sub-package */
528 package_element
= *top_object_list
;
531 * The sub_object_list will now point to an array of the
532 * four IRQ elements: Address, Pin, Source and source_index
534 sub_object_list
= package_element
->package
.elements
;
536 /* Scan the irq_table_elements for the Source Name String */
540 for (table_index
= 0; table_index
< 4 && !name_found
;
542 if (*sub_object_list
&& /* Null object allowed */
543 ((ACPI_TYPE_STRING
==
544 ACPI_GET_OBJECT_TYPE(*sub_object_list
)) ||
545 ((ACPI_TYPE_LOCAL_REFERENCE
==
546 ACPI_GET_OBJECT_TYPE(*sub_object_list
)) &&
547 ((*sub_object_list
)->reference
.opcode
==
548 AML_INT_NAMEPATH_OP
)))) {
551 /* Look at the next element */
557 temp_size_needed
+= (sizeof(struct acpi_pci_routing_table
) - 4);
559 /* Was a String type found? */
562 if (ACPI_GET_OBJECT_TYPE(*sub_object_list
) ==
565 * The length String.Length field does not include the
566 * terminating NULL, add 1
568 temp_size_needed
+= ((acpi_size
)
569 (*sub_object_list
)->string
.
572 temp_size_needed
+= acpi_ns_get_pathname_length((*sub_object_list
)->reference
.node
);
576 * If no name was found, then this is a NULL, which is
577 * translated as a u32 zero.
579 temp_size_needed
+= sizeof(u32
);
582 /* Round up the size since each element must be aligned */
584 temp_size_needed
= ACPI_ROUND_UP_to_64_bITS(temp_size_needed
);
586 /* Point to the next union acpi_operand_object */
592 * Adding an extra element to the end of the list, essentially a
595 *buffer_size_needed
=
596 temp_size_needed
+ sizeof(struct acpi_pci_routing_table
);
597 return_ACPI_STATUS(AE_OK
);