drivers/atm/ambassador.h

   1 /*
   2   Madge Ambassador ATM Adapter driver.
   3   Copyright (C) 1995-1999  Madge Networks Ltd.
   4
   5   This program is free software; you can redistribute it and/or modify
   6   it under the terms of the GNU General Public License as published by
   7   the Free Software Foundation; either version 2 of the License, or
   8   (at your option) any later version.
   9
  10   This program is distributed in the hope that it will be useful,
  11   but WITHOUT ANY WARRANTY; without even the implied warranty of
  12   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13   GNU General Public License for more details.
  14
  15   You should have received a copy of the GNU General Public License
  16   along with this program; if not, write to the Free Software
  17   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  18
  19   The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
  20   system and in the file COPYING in the Linux kernel source.
  21 */
  22
  23 #ifndef AMBASSADOR_H
  24 #define AMBASSADOR_H
  25
  26 #include <linux/config.h>
  27
  28 #ifdef CONFIG_ATM_AMBASSADOR_DEBUG
  29 #define DEBUG_AMBASSADOR
  30 #endif
  31
  32 #define DEV_LABEL                          "amb"
  33
  34 #ifndef PCI_VENDOR_ID_MADGE
  35 #define PCI_VENDOR_ID_MADGE                0x10B6
  36 #endif
  37 #ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR
  38 #define PCI_DEVICE_ID_MADGE_AMBASSADOR     0x1001
  39 #endif
  40 #ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR_BAD
  41 #define PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD 0x1002
  42 #endif
  43
  44 // diagnostic output
  45
  46 #define PRINTK(severity,format,args...) \
  47   printk(severity DEV_LABEL ": " format "\n" , ## args)
  48
  49 #ifdef DEBUG_AMBASSADOR
  50
  51 #define DBG_ERR  0x0001
  52 #define DBG_WARN 0x0002
  53 #define DBG_INFO 0x0004
  54 #define DBG_INIT 0x0008
  55 #define DBG_LOAD 0x0010
  56 #define DBG_VCC  0x0020
  57 #define DBG_QOS  0x0040
  58 #define DBG_CMD  0x0080
  59 #define DBG_TX   0x0100
  60 #define DBG_RX   0x0200
  61 #define DBG_SKB  0x0400
  62 #define DBG_POOL 0x0800
  63 #define DBG_IRQ  0x1000
  64 #define DBG_FLOW 0x2000
  65 #define DBG_REGS 0x4000
  66 #define DBG_DATA 0x8000
  67 #define DBG_MASK 0xffff
  68
  69 /* the ## prevents the annoying double expansion of the macro arguments */
  70 /* KERN_INFO is used since KERN_DEBUG often does not make it to the console */
  71 #define PRINTDB(bits,format,args...) \
  72   ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 )
  73 #define PRINTDM(bits,format,args...) \
  74   ( (debug & (bits)) ? printk (format , ## args) : 1 )
  75 #define PRINTDE(bits,format,args...) \
  76   ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 )
  77 #define PRINTD(bits,format,args...) \
  78   ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 )
  79
  80 #else
  81
  82 #define PRINTD(bits,format,args...)
  83 #define PRINTDB(bits,format,args...)
  84 #define PRINTDM(bits,format,args...)
  85 #define PRINTDE(bits,format,args...)
  86
  87 #endif
  88
  89 #define PRINTDD(bits,format,args...)
  90 #define PRINTDDB(sec,fmt,args...)
  91 #define PRINTDDM(sec,fmt,args...)
  92 #define PRINTDDE(sec,fmt,args...)
  93
  94 // tunable values (?)
  95
  96 /* MUST be powers of two -- why ? */
  97 #define COM_Q_ENTRIES        8
  98 #define TX_Q_ENTRIES        32
  99 #define RX_Q_ENTRIES        64
 100
 101 // fixed values
 102
 103 // guessing
 104 #define AMB_EXTENT         0x80
 105
 106 // Minimum allowed size for an Ambassador queue
 107 #define MIN_QUEUE_SIZE     2
 108
 109 // Ambassador microcode allows 1 to 4 pools, we use 4 (simpler)
 110 #define NUM_RX_POOLS       4
 111
 112 // minimum RX buffers required to cope with replenishing delay
 113 #define MIN_RX_BUFFERS     1
 114
 115 // minimum PCI latency we will tolerate (32 IS TOO SMALL)
 116 #define MIN_PCI_LATENCY   64 // 255
 117
 118 // VCs supported by card (VPI always 0)
 119 #define NUM_VPI_BITS       0
 120 #define NUM_VCI_BITS      10
 121 #define NUM_VCS         1024
 122
 123 /* The status field bits defined so far. */
 124 #define RX_ERR          0x8000 // always present if there is an error (hmm)
 125 #define CRC_ERR         0x4000 // AAL5 CRC error
 126 #define LEN_ERR         0x2000 // overlength frame
 127 #define ABORT_ERR       0x1000 // zero length field in received frame
 128 #define UNUSED_ERR      0x0800 // buffer returned unused
 129
 130 // Adaptor commands
 131
 132 #define SRB_OPEN_VC             0
 133 /* par_0: dwordswap(VC_number) */
 134 /* par_1: dwordswap(flags<<16) or wordswap(flags)*/
 135 /* flags:               */
 136
 137 /* LANE:        0x0004          */
 138 /* NOT_UBR:     0x0008          */
 139 /* ABR:         0x0010          */
 140
 141 /* RxPool0:     0x0000          */
 142 /* RxPool1:     0x0020          */
 143 /* RxPool2:     0x0040          */
 144 /* RxPool3:     0x0060          */
 145
 146 /* par_2: dwordswap(fp_rate<<16) or wordswap(fp_rate) */
 147
 148 #define SRB_CLOSE_VC            1
 149 /* par_0: dwordswap(VC_number) */
 150
 151 #define SRB_GET_BIA             2
 152 /* returns              */
 153 /* par_0: dwordswap(half BIA) */
 154 /* par_1: dwordswap(half BIA) */
 155
 156 #define SRB_GET_SUNI_STATS      3
 157 /* par_0: dwordswap(physical_host_address) */
 158
 159 #define SRB_SET_BITS_8          4
 160 #define SRB_SET_BITS_16         5
 161 #define SRB_SET_BITS_32         6
 162 #define SRB_CLEAR_BITS_8        7
 163 #define SRB_CLEAR_BITS_16       8
 164 #define SRB_CLEAR_BITS_32       9
 165 /* par_0: dwordswap(ATMizer address)    */
 166 /* par_1: dwordswap(mask) */
 167
 168 #define SRB_SET_8               10
 169 #define SRB_SET_16              11
 170 #define SRB_SET_32              12
 171 /* par_0: dwordswap(ATMizer address)    */
 172 /* par_1: dwordswap(data) */
 173
 174 #define SRB_GET_32              13
 175 /* par_0: dwordswap(ATMizer address)    */
 176 /* returns                      */
 177 /* par_1: dwordswap(ATMizer data) */
 178
 179 #define SRB_GET_VERSION         14
 180 /* returns              */
 181 /* par_0: dwordswap(Major Version) */
 182 /* par_1: dwordswap(Minor Version) */
 183
 184 #define SRB_FLUSH_BUFFER_Q      15
 185 /* Only flags to define which buffer pool; all others must be zero */
 186 /* par_0: dwordswap(flags<<16) or wordswap(flags)*/
 187
 188 #define SRB_GET_DMA_SPEEDS      16
 189 /* returns              */
 190 /* par_0: dwordswap(Read speed (bytes/sec)) */
 191 /* par_1: dwordswap(Write speed (bytes/sec)) */
 192
 193 #define SRB_MODIFY_VC_RATE      17
 194 /* par_0: dwordswap(VC_number) */
 195 /* par_1: dwordswap(fp_rate<<16) or wordswap(fp_rate) */
 196
 197 #define SRB_MODIFY_VC_FLAGS     18
 198 /* par_0: dwordswap(VC_number) */
 199 /* par_1: dwordswap(flags<<16) or wordswap(flags)*/
 200
 201 /* flags:               */
 202
 203 /* LANE:        0x0004          */
 204 /* NOT_UBR:     0x0008          */
 205 /* ABR:         0x0010          */
 206
 207 /* RxPool0:     0x0000          */
 208 /* RxPool1:     0x0020          */
 209 /* RxPool2:     0x0040          */
 210 /* RxPool3:     0x0060          */
 211
 212 #define SRB_RATE_SHIFT          16
 213 #define SRB_POOL_SHIFT          (SRB_FLAGS_SHIFT+5)
 214 #define SRB_FLAGS_SHIFT         16
 215
 216 #define SRB_STOP_TASKING        19
 217 #define SRB_START_TASKING       20
 218 #define SRB_SHUT_DOWN           21
 219 #define MAX_SRB                 21
 220
 221 #define SRB_COMPLETE            0xffffffff
 222
 223 #define TX_FRAME                0x80000000
 224
 225 // number of types of SRB MUST be a power of two -- why?
 226 #define NUM_OF_SRB      32
 227
 228 // number of bits of period info for rate
 229 #define MAX_RATE_BITS   6
 230
 231 #define TX_UBR          0x0000
 232 #define TX_UBR_CAPPED   0x0008
 233 #define TX_ABR          0x0018
 234 #define TX_FRAME_NOTCAP 0x0000
 235 #define TX_FRAME_CAPPED 0x8000
 236
 237 #define FP_155_RATE     0x24b1
 238 #define FP_25_RATE      0x1f9d
 239
 240 /* #define VERSION_NUMBER 0x01000000 // initial release */
 241 /* #define VERSION_NUMBER 0x01010000 // fixed startup probs PLX MB0 not cleared */
 242 /* #define VERSION_NUMBER 0x01020000 // changed SUNI reset timings; allowed r/w onchip */
 243
 244 /* #define VERSION_NUMBER 0x01030000 // clear local doorbell int reg on reset */
 245 /* #define VERSION_NUMBER 0x01040000 // PLX bug work around version PLUS */
 246 /* remove race conditions on basic interface */
 247 /* indicate to the host that diagnostics */
 248 /* have finished; if failed, how and what  */
 249 /* failed */
 250 /* fix host memory test to fix PLX bug */
 251 /* allow flash upgrade and BIA upgrade directly */
 252 /*  */
 253 #define VERSION_NUMBER 0x01050025 /* Jason's first hacked version. */
 254 /* Change in download algorithm */
 255
 256 #define DMA_VALID 0xb728e149 /* completely random */
 257
 258 #define FLASH_BASE 0xa0c00000
 259 #define FLASH_SIZE 0x00020000                   /* 128K */
 260 #define BIA_BASE (FLASH_BASE+0x0001c000)        /* Flash Sector 7 */
 261 #define BIA_ADDRESS ((void *)0xa0c1c000)
 262 #define PLX_BASE 0xe0000000
 263
 264 typedef enum {
 265   host_memory_test = 1,
 266   read_adapter_memory,
 267   write_adapter_memory,
 268   adapter_start,
 269   get_version_number,
 270   interrupt_host,
 271   flash_erase_sector,
 272   adap_download_block = 0x20,
 273   adap_erase_flash,
 274   adap_run_in_iram,
 275   adap_end_download
 276 } loader_command;
 277
 278 #define BAD_COMMAND                     (-1)
 279 #define COMMAND_IN_PROGRESS             1
 280 #define COMMAND_PASSED_TEST             2
 281 #define COMMAND_FAILED_TEST             3
 282 #define COMMAND_READ_DATA_OK            4
 283 #define COMMAND_READ_BAD_ADDRESS        5
 284 #define COMMAND_WRITE_DATA_OK           6
 285 #define COMMAND_WRITE_BAD_ADDRESS       7
 286 #define COMMAND_WRITE_FLASH_FAILURE     8
 287 #define COMMAND_COMPLETE                9
 288 #define COMMAND_FLASH_ERASE_FAILURE     10
 289 #define COMMAND_WRITE_BAD_DATA          11
 290
 291 /* bit fields for mailbox[0] return values */
 292
 293 #define GPINT_TST_FAILURE               0x00000001
 294 #define SUNI_DATA_PATTERN_FAILURE       0x00000002
 295 #define SUNI_DATA_BITS_FAILURE          0x00000004
 296 #define SUNI_UTOPIA_FAILURE             0x00000008
 297 #define SUNI_FIFO_FAILURE               0x00000010
 298 #define SRAM_FAILURE                    0x00000020
 299 #define SELF_TEST_FAILURE               0x0000003f
 300
 301 /* mailbox[1] = 0 in progress, -1 on completion */
 302 /* mailbox[2] = current test 00 00 test(8 bit) phase(8 bit) */
 303 /* mailbox[3] = last failure, 00 00 test(8 bit) phase(8 bit) */
 304 /* mailbox[4],mailbox[5],mailbox[6] random failure values */
 305
 306 /* PLX/etc. memory map including command structure */
 307
 308 /* These registers may also be memory mapped in PCI memory */
 309
 310 #define UNUSED_LOADER_MAILBOXES 6
 311
 312 typedef struct {
 313   u32 stuff[16];
 314   union {
 315     struct {
 316       u32 result;
 317       u32 ready;
 318       u32 stuff[UNUSED_LOADER_MAILBOXES];
 319     } loader;
 320     struct {
 321       u32 cmd_address;
 322       u32 tx_address;
 323       u32 rx_address[NUM_RX_POOLS];
 324       u32 gen_counter;
 325       u32 spare;
 326     } adapter;
 327   } mb;
 328   u32 doorbell;
 329   u32 interrupt;
 330   u32 interrupt_control;
 331   u32 reset_control;
 332 } amb_mem;
 333
 334 /* RESET bit, IRQ (card to host) and doorbell (host to card) enable bits */
 335 #define AMB_RESET_BITS     0x40000000
 336 #define AMB_INTERRUPT_BITS 0x00000300
 337 #define AMB_DOORBELL_BITS  0x00030000
 338
 339 /* loader commands */
 340
 341 #define MAX_COMMAND_DATA 13
 342 #define MAX_TRANSFER_DATA 11
 343
 344 typedef struct {
 345   __be32 address;
 346   __be32 count;
 347   __be32 data[MAX_TRANSFER_DATA];
 348 } transfer_block;
 349
 350 typedef struct {
 351   __be32 result;
 352   __be32 command;
 353   union {
 354     transfer_block transfer;
 355     __be32 version;
 356     __be32 start;
 357     __be32 data[MAX_COMMAND_DATA];
 358   } payload;
 359   __be32 valid;
 360 } loader_block;
 361
 362 /* command queue */
 363
 364 /* Again all data are BIG ENDIAN */
 365
 366 typedef struct {
 367   union {
 368     struct {
 369       __be32 vc;
 370       __be32 flags;
 371       __be32 rate;
 372     } open;
 373     struct {
 374       __be32 vc;
 375       __be32 rate;
 376     } modify_rate;
 377     struct {
 378       __be32 vc;
 379       __be32 flags;
 380     } modify_flags;
 381     struct {
 382       __be32 vc;
 383     } close;
 384     struct {
 385       __be32 lower4;
 386       __be32 upper2;
 387     } bia;
 388     struct {
 389       __be32 address;
 390     } suni;
 391     struct {
 392       __be32 major;
 393       __be32 minor;
 394     } version;
 395     struct {
 396       __be32 read;
 397       __be32 write;
 398     } speed;
 399     struct {
 400       __be32 flags;
 401     } flush;
 402     struct {
 403       __be32 address;
 404       __be32 data;
 405     } memory;
 406     __be32 par[3];
 407   } args;
 408   __be32 request;
 409 } command;
 410
 411 /* transmit queues and associated structures */
 412
 413 /* The hosts transmit structure. All BIG ENDIAN; host address
 414    restricted to first 1GByte, but address passed to the card must
 415    have the top MS bit or'ed in. -- check this */
 416
 417 /* TX is described by 1+ tx_frags followed by a tx_frag_end */
 418
 419 typedef struct {
 420   __be32 bytes;
 421   __be32 address;
 422 } tx_frag;
 423
 424 /* apart from handle the fields here are for the adapter to play with
 425    and should be set to zero */
 426
 427 typedef struct {
 428   u32   handle;
 429   u16   vc;
 430   u16   next_descriptor_length;
 431   u32   next_descriptor;
 432 #ifdef AMB_NEW_MICROCODE
 433   u8    cpcs_uu;
 434   u8    cpi;
 435   u16   pad;
 436 #endif
 437 } tx_frag_end;
 438
 439 typedef struct {
 440   tx_frag tx_frag;
 441   tx_frag_end tx_frag_end;
 442   struct sk_buff * skb;
 443 } tx_simple;
 444
 445 #if 0
 446 typedef union {
 447   tx_frag       fragment;
 448   tx_frag_end   end_of_list;
 449 } tx_descr;
 450 #endif
 451
 452 /* this "points" to the sequence of fragments and trailer */
 453
 454 typedef struct {
 455   __be16        vc;
 456   __be16        tx_descr_length;
 457   __be32        tx_descr_addr;
 458 } tx_in;
 459
 460 /* handle is the handle from tx_in */
 461
 462 typedef struct {
 463   u32 handle;
 464 } tx_out;
 465
 466 /* receive frame structure */
 467
 468 /* All BIG ENDIAN; handle is as passed from host; length is zero for
 469    aborted frames, and frames with errors. Header is actually VC
 470    number, lec-id is NOT yet supported. */
 471
 472 typedef struct {
 473   u32  handle;
 474   __be16  vc;
 475   __be16  lec_id; // unused
 476   __be16  status;
 477   __be16  length;
 478 } rx_out;
 479
 480 /* buffer supply structure */
 481
 482 typedef struct {
 483   u32 handle;
 484   __be32 host_address;
 485 } rx_in;
 486
 487 /* This first structure is the area in host memory where the adapter
 488    writes its pointer values. These pointer values are BIG ENDIAN and
 489    reside in the same 4MB 'page' as this structure. The host gives the
 490    adapter the address of this block by sending a doorbell interrupt
 491    to the adapter after downloading the code and setting it going. The
 492    addresses have the top 10 bits set to 1010000010b -- really?
 493
 494    The host must initialise these before handing the block to the
 495    adapter. */
 496
 497 typedef struct {
 498   __be32 command_start;         /* SRB commands completions */
 499   __be32 command_end;           /* SRB commands completions */
 500   __be32 tx_start;
 501   __be32 tx_end;
 502   __be32 txcom_start;           /* tx completions */
 503   __be32 txcom_end;             /* tx completions */
 504   struct {
 505     __be32 buffer_start;
 506     __be32 buffer_end;
 507     u32 buffer_q_get;
 508     u32 buffer_q_end;
 509     u32 buffer_aptr;
 510     __be32 rx_start;            /* rx completions */
 511     __be32 rx_end;
 512     u32 rx_ptr;
 513     __be32 buffer_size;         /* size of host buffer */
 514   } rec_struct[NUM_RX_POOLS];
 515 #ifdef AMB_NEW_MICROCODE
 516   u16 init_flags;
 517   u16 talk_block_spare;
 518 #endif
 519 } adap_talk_block;
 520
 521 /* This structure must be kept in line with the vcr image in sarmain.h
 522
 523    This is the structure in the host filled in by the adapter by
 524    GET_SUNI_STATS */
 525
 526 typedef struct {
 527   u8    racp_chcs;
 528   u8    racp_uhcs;
 529   u16   spare;
 530   u32   racp_rcell;
 531   u32   tacp_tcell;
 532   u32   flags;
 533   u32   dropped_cells;
 534   u32   dropped_frames;
 535 } suni_stats;
 536
 537 typedef enum {
 538   dead
 539 } amb_flags;
 540
 541 #define NEXTQ(current,start,limit) \
 542   ( (current)+1 < (limit) ? (current)+1 : (start) )
 543
 544 typedef struct {
 545   command * start;
 546   command * in;
 547   command * out;
 548   command * limit;
 549 } amb_cq_ptrs;
 550
 551 typedef struct {
 552   spinlock_t lock;
 553   unsigned int pending;
 554   unsigned int high;
 555   unsigned int filled;
 556   unsigned int maximum; // size - 1 (q implementation)
 557   amb_cq_ptrs ptrs;
 558 } amb_cq;
 559
 560 typedef struct {
 561   spinlock_t lock;
 562   unsigned int pending;
 563   unsigned int high;
 564   unsigned int filled;
 565   unsigned int maximum; // size - 1 (q implementation)
 566   struct {
 567     tx_in * start;
 568     tx_in * ptr;
 569     tx_in * limit;
 570   } in;
 571   struct {
 572     tx_out * start;
 573     tx_out * ptr;
 574     tx_out * limit;
 575   } out;
 576 } amb_txq;
 577
 578 typedef struct {
 579   spinlock_t lock;
 580   unsigned int pending;
 581   unsigned int low;
 582   unsigned int emptied;
 583   unsigned int maximum; // size - 1 (q implementation)
 584   struct {
 585     rx_in * start;
 586     rx_in * ptr;
 587     rx_in * limit;
 588   } in;
 589   struct {
 590     rx_out * start;
 591     rx_out * ptr;
 592     rx_out * limit;
 593   } out;
 594   unsigned int buffers_wanted;
 595   unsigned int buffer_size;
 596 } amb_rxq;
 597
 598 typedef struct {
 599   unsigned long tx_ok;
 600   struct {
 601     unsigned long ok;
 602     unsigned long error;
 603     unsigned long badcrc;
 604     unsigned long toolong;
 605     unsigned long aborted;
 606     unsigned long unused;
 607   } rx;
 608 } amb_stats;
 609
 610 // a single struct pointed to by atm_vcc->dev_data
 611
 612 typedef struct {
 613   u8               tx_vc_bits:7;
 614   u8               tx_present:1;
 615 } amb_tx_info;
 616
 617 typedef struct {
 618   unsigned char    pool;
 619 } amb_rx_info;
 620
 621 typedef struct {
 622   amb_rx_info      rx_info;
 623   u16              tx_frame_bits;
 624   unsigned int     tx_rate;
 625   unsigned int     rx_rate;
 626 } amb_vcc;
 627
 628 struct amb_dev {
 629   u8               irq;
 630   long             flags;
 631   u32              iobase;
 632   u32 *            membase;
 633
 634 #ifdef FILL_RX_POOLS_IN_BH
 635   struct work_struct bh;
 636 #endif
 637
 638   amb_cq           cq;
 639   amb_txq          txq;
 640   amb_rxq          rxq[NUM_RX_POOLS];
 641
 642   struct semaphore vcc_sf;
 643   amb_tx_info      txer[NUM_VCS];
 644   struct atm_vcc * rxer[NUM_VCS];
 645   unsigned int     tx_avail;
 646   unsigned int     rx_avail;
 647
 648   amb_stats        stats;
 649
 650   struct atm_dev * atm_dev;
 651   struct pci_dev * pci_dev;
 652   struct timer_list housekeeping;
 653 };
 654
 655 typedef struct amb_dev amb_dev;
 656
 657 #define AMB_DEV(atm_dev) ((amb_dev *) (atm_dev)->dev_data)
 658 #define AMB_VCC(atm_vcc) ((amb_vcc *) (atm_vcc)->dev_data)
 659
 660 /* the microcode */
 661
 662 typedef struct {
 663   u32 start;
 664   unsigned int count;
 665 } region;
 666
 667 static region ucode_regions[];
 668 static u32 ucode_data[];
 669 static u32 ucode_start;
 670
 671 /* rate rounding */
 672
 673 typedef enum {
 674   round_up,
 675   round_down,
 676   round_nearest
 677 } rounding;
 678
 679 #endif