Linux 2.6.17.7
[linux/fpc-iii.git] / drivers / net / skfp / h / hwmtm.h
blob1a606d4bfe5e98253ff3b7f241de99887804ebee
1 /******************************************************************************
3 * (C)Copyright 1998,1999 SysKonnect,
4 * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * The information in this file is provided "AS IS" without warranty.
13 ******************************************************************************/
15 #ifndef _HWM_
16 #define _HWM_
18 #include "h/mbuf.h"
21 * MACRO for DMA synchronization:
22 * The descriptor 'desc' is flushed for the device 'flag'.
23 * Devices are the CPU (DDI_DMA_SYNC_FORCPU) and the
24 * adapter (DDI_DMA_SYNC_FORDEV).
26 * 'desc' Pointer to a Rx or Tx descriptor.
27 * 'flag' Flag for direction (view for CPU or DEVICE) that
28 * should be synchronized.
30 * Empty macros and defines are specified here. The real macro
31 * is os-specific and should be defined in osdef1st.h.
33 #ifndef DRV_BUF_FLUSH
34 #define DRV_BUF_FLUSH(desc,flag)
35 #define DDI_DMA_SYNC_FORCPU
36 #define DDI_DMA_SYNC_FORDEV
37 #endif
40 * hardware modul dependent receive modes
42 #define RX_ENABLE_PASS_SMT 21
43 #define RX_DISABLE_PASS_SMT 22
44 #define RX_ENABLE_PASS_NSA 23
45 #define RX_DISABLE_PASS_NSA 24
46 #define RX_ENABLE_PASS_DB 25
47 #define RX_DISABLE_PASS_DB 26
48 #define RX_DISABLE_PASS_ALL 27
49 #define RX_DISABLE_LLC_PROMISC 28
50 #define RX_ENABLE_LLC_PROMISC 29
53 #ifndef DMA_RD
54 #define DMA_RD 1 /* memory -> hw */
55 #endif
56 #ifndef DMA_WR
57 #define DMA_WR 2 /* hw -> memory */
58 #endif
59 #define SMT_BUF 0x80
62 * bits of the frame status byte
64 #define EN_IRQ_EOF 0x02 /* get IRQ after end of frame transmission */
65 #define LOC_TX 0x04 /* send frame to the local SMT */
66 #define LAST_FRAG 0x08 /* last TxD of the frame */
67 #define FIRST_FRAG 0x10 /* first TxD of the frame */
68 #define LAN_TX 0x20 /* send frame to network if set */
69 #define RING_DOWN 0x40 /* error: unable to send, ring down */
70 #define OUT_OF_TXD 0x80 /* error: not enough TxDs available */
73 #ifndef NULL
74 #define NULL 0
75 #endif
77 #ifdef LITTLE_ENDIAN
78 #define HWM_REVERSE(x) (x)
79 #else
80 #define HWM_REVERSE(x) ((((x)<<24L)&0xff000000L) + \
81 (((x)<< 8L)&0x00ff0000L) + \
82 (((x)>> 8L)&0x0000ff00L) + \
83 (((x)>>24L)&0x000000ffL))
84 #endif
86 #define C_INDIC (1L<<25)
87 #define A_INDIC (1L<<26)
88 #define RD_FS_LOCAL 0x80
91 * DEBUG FLAGS
93 #define DEBUG_SMTF 1
94 #define DEBUG_SMT 2
95 #define DEBUG_ECM 3
96 #define DEBUG_RMT 4
97 #define DEBUG_CFM 5
98 #define DEBUG_PCM 6
99 #define DEBUG_SBA 7
100 #define DEBUG_ESS 8
102 #define DB_HWM_RX 10
103 #define DB_HWM_TX 11
104 #define DB_HWM_GEN 12
106 struct s_mbuf_pool {
107 #ifndef MB_OUTSIDE_SMC
108 SMbuf mb[MAX_MBUF] ; /* mbuf pool */
109 #endif
110 SMbuf *mb_start ; /* points to the first mb */
111 SMbuf *mb_free ; /* free queue */
114 struct hwm_r {
116 * hardware modul specific receive variables
118 u_int len ; /* length of the whole frame */
119 char *mb_pos ; /* SMbuf receive position */
122 struct hw_modul {
124 * All hardware modul specific variables
126 struct s_mbuf_pool mbuf_pool ;
127 struct hwm_r r ;
129 union s_fp_descr volatile *descr_p ; /* points to the desriptor area */
131 u_short pass_SMT ; /* pass SMT frames */
132 u_short pass_NSA ; /* pass all NSA frames */
133 u_short pass_DB ; /* pass Direct Beacon Frames */
134 u_short pass_llc_promisc ; /* pass all llc frames (default ON) */
136 SMbuf *llc_rx_pipe ; /* points to the first queued llc fr */
137 SMbuf *llc_rx_tail ; /* points to the last queued llc fr */
138 int queued_rx_frames ; /* number of queued frames */
140 SMbuf *txd_tx_pipe ; /* points to first mb in the txd ring */
141 SMbuf *txd_tx_tail ; /* points to last mb in the txd ring */
142 int queued_txd_mb ; /* number of SMT MBufs in txd ring */
144 int rx_break ; /* rev. was breaked because ind. off */
145 int leave_isr ; /* leave fddi_isr immedeately if set */
146 int isr_flag ; /* set, when HWM is entered from isr */
148 * varaibles for the current transmit frame
150 struct s_smt_tx_queue *tx_p ; /* pointer to the transmit queue */
151 u_long tx_descr ; /* tx descriptor for FORMAC+ */
152 int tx_len ; /* tx frame length */
153 SMbuf *tx_mb ; /* SMT tx MBuf pointer */
154 char *tx_data ; /* data pointer to the SMT tx Mbuf */
156 int detec_count ; /* counter for out of RxD condition */
157 u_long rx_len_error ; /* rx len FORMAC != sum of fragments */
162 * DEBUG structs and macros
165 #ifdef DEBUG
166 struct os_debug {
167 int hwm_rx ;
168 int hwm_tx ;
169 int hwm_gen ;
171 #endif
173 #ifdef DEBUG
174 #ifdef DEBUG_BRD
175 #define DB_P smc->debug
176 #else
177 #define DB_P debug
178 #endif
180 #define DB_RX(a,b,c,lev) if (DB_P.d_os.hwm_rx >= (lev)) printf(a,b,c)
181 #define DB_TX(a,b,c,lev) if (DB_P.d_os.hwm_tx >= (lev)) printf(a,b,c)
182 #define DB_GEN(a,b,c,lev) if (DB_P.d_os.hwm_gen >= (lev)) printf(a,b,c)
183 #else /* DEBUG */
184 #define DB_RX(a,b,c,lev)
185 #define DB_TX(a,b,c,lev)
186 #define DB_GEN(a,b,c,lev)
187 #endif /* DEBUG */
189 #ifndef SK_BREAK
190 #define SK_BREAK()
191 #endif
195 * HWM Macros
199 * BEGIN_MANUAL_ENTRY(HWM_GET_TX_PHYS)
200 * u_long HWM_GET_TX_PHYS(txd)
202 * function MACRO (hardware module, hwmtm.h)
203 * This macro may be invoked by the OS-specific module to read
204 * the physical address of the specified TxD.
206 * para txd pointer to the TxD
208 * END_MANUAL_ENTRY
210 #define HWM_GET_TX_PHYS(txd) (u_long)AIX_REVERSE((txd)->txd_tbadr)
213 * BEGIN_MANUAL_ENTRY(HWM_GET_TX_LEN)
214 * int HWM_GET_TX_LEN(txd)
216 * function MACRO (hardware module, hwmtm.h)
217 * This macro may be invoked by the OS-specific module to read
218 * the fragment length of the specified TxD
220 * para rxd pointer to the TxD
222 * return the length of the fragment in bytes
224 * END_MANUAL_ENTRY
226 #define HWM_GET_TX_LEN(txd) ((int)AIX_REVERSE((txd)->txd_tbctrl)& RD_LENGTH)
229 * BEGIN_MANUAL_ENTRY(HWM_GET_TX_USED)
230 * txd *HWM_GET_TX_USED(smc,queue)
232 * function MACRO (hardware module, hwmtm.h)
233 * This macro may be invoked by the OS-specific module to get the
234 * number of used TxDs for the queue, specified by the index.
236 * para queue the number of the send queue: Can be specified by
237 * QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
239 * return number of used TxDs for this send queue
241 * END_MANUAL_ENTRY
243 #define HWM_GET_TX_USED(smc,queue) (int) (smc)->hw.fp.tx_q[queue].tx_used
246 * BEGIN_MANUAL_ENTRY(HWM_GET_CURR_TXD)
247 * txd *HWM_GET_CURR_TXD(smc,queue)
249 * function MACRO (hardware module, hwmtm.h)
250 * This macro may be invoked by the OS-specific module to get the
251 * pointer to the TxD which points to the current queue put
252 * position.
254 * para queue the number of the send queue: Can be specified by
255 * QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
257 * return pointer to the current TxD
259 * END_MANUAL_ENTRY
261 #define HWM_GET_CURR_TXD(smc,queue) (struct s_smt_fp_txd volatile *)\
262 (smc)->hw.fp.tx_q[queue].tx_curr_put
265 * BEGIN_MANUAL_ENTRY(HWM_GET_RX_FRAG_LEN)
266 * int HWM_GET_RX_FRAG_LEN(rxd)
268 * function MACRO (hardware module, hwmtm.h)
269 * This macro may be invoked by the OS-specific module to read
270 * the fragment length of the specified RxD
272 * para rxd pointer to the RxD
274 * return the length of the fragment in bytes
276 * END_MANUAL_ENTRY
278 #define HWM_GET_RX_FRAG_LEN(rxd) ((int)AIX_REVERSE((rxd)->rxd_rbctrl)& \
279 RD_LENGTH)
282 * BEGIN_MANUAL_ENTRY(HWM_GET_RX_PHYS)
283 * u_long HWM_GET_RX_PHYS(rxd)
285 * function MACRO (hardware module, hwmtm.h)
286 * This macro may be invoked by the OS-specific module to read
287 * the physical address of the specified RxD.
289 * para rxd pointer to the RxD
291 * return the RxD's physical pointer to the data fragment
293 * END_MANUAL_ENTRY
295 #define HWM_GET_RX_PHYS(rxd) (u_long)AIX_REVERSE((rxd)->rxd_rbadr)
298 * BEGIN_MANUAL_ENTRY(HWM_GET_RX_USED)
299 * int HWM_GET_RX_USED(smc)
301 * function MACRO (hardware module, hwmtm.h)
302 * This macro may be invoked by the OS-specific module to get
303 * the count of used RXDs in receive queue 1.
305 * return the used RXD count of receive queue 1
307 * NOTE: Remember, because of an ASIC bug at least one RXD should be unused
308 * in the descriptor ring !
310 * END_MANUAL_ENTRY
312 #define HWM_GET_RX_USED(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_used)
315 * BEGIN_MANUAL_ENTRY(HWM_GET_RX_FREE)
316 * int HWM_GET_RX_FREE(smc)
318 * function MACRO (hardware module, hwmtm.h)
319 * This macro may be invoked by the OS-specific module to get
320 * the rxd_free count of receive queue 1.
322 * return the rxd_free count of receive queue 1
324 * END_MANUAL_ENTRY
326 #define HWM_GET_RX_FREE(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_free-1)
329 * BEGIN_MANUAL_ENTRY(HWM_GET_CURR_RXD)
330 * rxd *HWM_GET_CURR_RXD(smc)
332 * function MACRO (hardware module, hwmtm.h)
333 * This macro may be invoked by the OS-specific module to get the
334 * pointer to the RxD which points to the current queue put
335 * position.
337 * return pointer to the current RxD
339 * END_MANUAL_ENTRY
341 #define HWM_GET_CURR_RXD(smc) (struct s_smt_fp_rxd volatile *)\
342 (smc)->hw.fp.rx_q[QUEUE_R1].rx_curr_put
345 * BEGIN_MANUAL_ENTRY(HWM_RX_CHECK)
346 * void HWM_RX_CHECK(smc,low_water)
348 * function MACRO (hardware module, hwmtm.h)
349 * This macro is invoked by the OS-specific before it left the
350 * function mac_drv_rx_complete. This macro calls mac_drv_fill_rxd
351 * if the number of used RxDs is equal or lower than the
352 * the given low water mark.
354 * para low_water low water mark of used RxD's
356 * END_MANUAL_ENTRY
358 #ifndef HWM_NO_FLOW_CTL
359 #define HWM_RX_CHECK(smc,low_water) {\
360 if ((low_water) >= (smc)->hw.fp.rx_q[QUEUE_R1].rx_used) {\
361 mac_drv_fill_rxd(smc) ;\
364 #else
365 #define HWM_RX_CHECK(smc,low_water) mac_drv_fill_rxd(smc)
366 #endif
368 #ifndef HWM_EBASE
369 #define HWM_EBASE 500
370 #endif
372 #define HWM_E0001 HWM_EBASE + 1
373 #define HWM_E0001_MSG "HWM: Wrong size of s_rxd_os struct"
374 #define HWM_E0002 HWM_EBASE + 2
375 #define HWM_E0002_MSG "HWM: Wrong size of s_txd_os struct"
376 #define HWM_E0003 HWM_EBASE + 3
377 #define HWM_E0003_MSG "HWM: smt_free_mbuf() called with NULL pointer"
378 #define HWM_E0004 HWM_EBASE + 4
379 #define HWM_E0004_MSG "HWM: Parity error rx queue 1"
380 #define HWM_E0005 HWM_EBASE + 5
381 #define HWM_E0005_MSG "HWM: Encoding error rx queue 1"
382 #define HWM_E0006 HWM_EBASE + 6
383 #define HWM_E0006_MSG "HWM: Encoding error async tx queue"
384 #define HWM_E0007 HWM_EBASE + 7
385 #define HWM_E0007_MSG "HWM: Encoding error sync tx queue"
386 #define HWM_E0008 HWM_EBASE + 8
387 #define HWM_E0008_MSG ""
388 #define HWM_E0009 HWM_EBASE + 9
389 #define HWM_E0009_MSG "HWM: Out of RxD condition detected"
390 #define HWM_E0010 HWM_EBASE + 10
391 #define HWM_E0010_MSG "HWM: A protocol layer has tried to send a frame with an invalid frame control"
392 #define HWM_E0011 HWM_EBASE + 11
393 #define HWM_E0011_MSG "HWM: mac_drv_clear_tx_queue was called although the hardware wasn't stopped"
394 #define HWM_E0012 HWM_EBASE + 12
395 #define HWM_E0012_MSG "HWM: mac_drv_clear_rx_queue was called although the hardware wasn't stopped"
396 #define HWM_E0013 HWM_EBASE + 13
397 #define HWM_E0013_MSG "HWM: mac_drv_repair_descr was called although the hardware wasn't stopped"
399 #endif