Linux 2.6.17.7
[linux/fpc-iii.git] / drivers / sbus / char / uctrl.c
blobe2d9a7c854270051ceabf7c7b090ce000e4e060c
1 /* $Id: uctrl.c,v 1.12 2001/10/08 22:19:51 davem Exp $
2 * uctrl.c: TS102 Microcontroller interface on Tadpole Sparcbook 3
4 * Copyright 1999 Derrick J Brashear (shadow@dementia.org)
5 */
7 #include <linux/module.h>
8 #include <linux/sched.h>
9 #include <linux/errno.h>
10 #include <linux/delay.h>
11 #include <linux/interrupt.h>
12 #include <linux/slab.h>
13 #include <linux/ioport.h>
14 #include <linux/init.h>
15 #include <linux/miscdevice.h>
16 #include <linux/mm.h>
18 #include <asm/openprom.h>
19 #include <asm/oplib.h>
20 #include <asm/system.h>
21 #include <asm/irq.h>
22 #include <asm/io.h>
23 #include <asm/pgtable.h>
24 #include <asm/sbus.h>
26 #define UCTRL_MINOR 174
28 #define DEBUG 1
29 #ifdef DEBUG
30 #define dprintk(x) printk x
31 #else
32 #define dprintk(x)
33 #endif
35 struct uctrl_regs {
36 volatile u32 uctrl_intr;
37 volatile u32 uctrl_data;
38 volatile u32 uctrl_stat;
39 volatile u32 uctrl_xxx[5];
42 struct ts102_regs {
43 volatile u32 card_a_intr;
44 volatile u32 card_a_stat;
45 volatile u32 card_a_ctrl;
46 volatile u32 card_a_xxx;
47 volatile u32 card_b_intr;
48 volatile u32 card_b_stat;
49 volatile u32 card_b_ctrl;
50 volatile u32 card_b_xxx;
51 volatile u32 uctrl_intr;
52 volatile u32 uctrl_data;
53 volatile u32 uctrl_stat;
54 volatile u32 uctrl_xxx;
55 volatile u32 ts102_xxx[4];
58 /* Bits for uctrl_intr register */
59 #define UCTRL_INTR_TXE_REQ 0x01 /* transmit FIFO empty int req */
60 #define UCTRL_INTR_TXNF_REQ 0x02 /* transmit FIFO not full int req */
61 #define UCTRL_INTR_RXNE_REQ 0x04 /* receive FIFO not empty int req */
62 #define UCTRL_INTR_RXO_REQ 0x08 /* receive FIFO overflow int req */
63 #define UCTRL_INTR_TXE_MSK 0x10 /* transmit FIFO empty mask */
64 #define UCTRL_INTR_TXNF_MSK 0x20 /* transmit FIFO not full mask */
65 #define UCTRL_INTR_RXNE_MSK 0x40 /* receive FIFO not empty mask */
66 #define UCTRL_INTR_RXO_MSK 0x80 /* receive FIFO overflow mask */
68 /* Bits for uctrl_stat register */
69 #define UCTRL_STAT_TXE_STA 0x01 /* transmit FIFO empty status */
70 #define UCTRL_STAT_TXNF_STA 0x02 /* transmit FIFO not full status */
71 #define UCTRL_STAT_RXNE_STA 0x04 /* receive FIFO not empty status */
72 #define UCTRL_STAT_RXO_STA 0x08 /* receive FIFO overflow status */
74 static const char *uctrl_extstatus[16] = {
75 "main power available",
76 "internal battery attached",
77 "external battery attached",
78 "external VGA attached",
79 "external keyboard attached",
80 "external mouse attached",
81 "lid down",
82 "internal battery currently charging",
83 "external battery currently charging",
84 "internal battery currently discharging",
85 "external battery currently discharging",
88 /* Everything required for one transaction with the uctrl */
89 struct uctrl_txn {
90 u8 opcode;
91 u8 inbits;
92 u8 outbits;
93 u8 *inbuf;
94 u8 *outbuf;
97 struct uctrl_status {
98 u8 current_temp; /* 0x07 */
99 u8 reset_status; /* 0x0b */
100 u16 event_status; /* 0x0c */
101 u16 error_status; /* 0x10 */
102 u16 external_status; /* 0x11, 0x1b */
103 u8 internal_charge; /* 0x18 */
104 u8 external_charge; /* 0x19 */
105 u16 control_lcd; /* 0x20 */
106 u8 control_bitport; /* 0x21 */
107 u8 speaker_volume; /* 0x23 */
108 u8 control_tft_brightness; /* 0x24 */
109 u8 control_kbd_repeat_delay; /* 0x28 */
110 u8 control_kbd_repeat_period; /* 0x29 */
111 u8 control_screen_contrast; /* 0x2F */
114 enum uctrl_opcode {
115 READ_SERIAL_NUMBER=0x1,
116 READ_ETHERNET_ADDRESS=0x2,
117 READ_HARDWARE_VERSION=0x3,
118 READ_MICROCONTROLLER_VERSION=0x4,
119 READ_MAX_TEMPERATURE=0x5,
120 READ_MIN_TEMPERATURE=0x6,
121 READ_CURRENT_TEMPERATURE=0x7,
122 READ_SYSTEM_VARIANT=0x8,
123 READ_POWERON_CYCLES=0x9,
124 READ_POWERON_SECONDS=0xA,
125 READ_RESET_STATUS=0xB,
126 READ_EVENT_STATUS=0xC,
127 READ_REAL_TIME_CLOCK=0xD,
128 READ_EXTERNAL_VGA_PORT=0xE,
129 READ_MICROCONTROLLER_ROM_CHECKSUM=0xF,
130 READ_ERROR_STATUS=0x10,
131 READ_EXTERNAL_STATUS=0x11,
132 READ_USER_CONFIGURATION_AREA=0x12,
133 READ_MICROCONTROLLER_VOLTAGE=0x13,
134 READ_INTERNAL_BATTERY_VOLTAGE=0x14,
135 READ_DCIN_VOLTAGE=0x15,
136 READ_HORIZONTAL_POINTER_VOLTAGE=0x16,
137 READ_VERTICAL_POINTER_VOLTAGE=0x17,
138 READ_INTERNAL_BATTERY_CHARGE_LEVEL=0x18,
139 READ_EXTERNAL_BATTERY_CHARGE_LEVEL=0x19,
140 READ_REAL_TIME_CLOCK_ALARM=0x1A,
141 READ_EVENT_STATUS_NO_RESET=0x1B,
142 READ_INTERNAL_KEYBOARD_LAYOUT=0x1C,
143 READ_EXTERNAL_KEYBOARD_LAYOUT=0x1D,
144 READ_EEPROM_STATUS=0x1E,
145 CONTROL_LCD=0x20,
146 CONTROL_BITPORT=0x21,
147 SPEAKER_VOLUME=0x23,
148 CONTROL_TFT_BRIGHTNESS=0x24,
149 CONTROL_WATCHDOG=0x25,
150 CONTROL_FACTORY_EEPROM_AREA=0x26,
151 CONTROL_KBD_TIME_UNTIL_REPEAT=0x28,
152 CONTROL_KBD_TIME_BETWEEN_REPEATS=0x29,
153 CONTROL_TIMEZONE=0x2A,
154 CONTROL_MARK_SPACE_RATIO=0x2B,
155 CONTROL_DIAGNOSTIC_MODE=0x2E,
156 CONTROL_SCREEN_CONTRAST=0x2F,
157 RING_BELL=0x30,
158 SET_DIAGNOSTIC_STATUS=0x32,
159 CLEAR_KEY_COMBINATION_TABLE=0x33,
160 PERFORM_SOFTWARE_RESET=0x34,
161 SET_REAL_TIME_CLOCK=0x35,
162 RECALIBRATE_POINTING_STICK=0x36,
163 SET_BELL_FREQUENCY=0x37,
164 SET_INTERNAL_BATTERY_CHARGE_RATE=0x39,
165 SET_EXTERNAL_BATTERY_CHARGE_RATE=0x3A,
166 SET_REAL_TIME_CLOCK_ALARM=0x3B,
167 READ_EEPROM=0x40,
168 WRITE_EEPROM=0x41,
169 WRITE_TO_STATUS_DISPLAY=0x42,
170 DEFINE_SPECIAL_CHARACTER=0x43,
171 DEFINE_KEY_COMBINATION_ENTRY=0x50,
172 DEFINE_STRING_TABLE_ENTRY=0x51,
173 DEFINE_STATUS_SCREEN_DISPLAY=0x52,
174 PERFORM_EMU_COMMANDS=0x64,
175 READ_EMU_REGISTER=0x65,
176 WRITE_EMU_REGISTER=0x66,
177 READ_EMU_RAM=0x67,
178 WRITE_EMU_RAM=0x68,
179 READ_BQ_REGISTER=0x69,
180 WRITE_BQ_REGISTER=0x6A,
181 SET_USER_PASSWORD=0x70,
182 VERIFY_USER_PASSWORD=0x71,
183 GET_SYSTEM_PASSWORD_KEY=0x72,
184 VERIFY_SYSTEM_PASSWORD=0x73,
185 POWER_OFF=0x82,
186 POWER_RESTART=0x83,
189 struct uctrl_driver {
190 struct uctrl_regs *regs;
191 int irq;
192 int pending;
193 struct uctrl_status status;
196 static struct uctrl_driver drv;
198 void uctrl_get_event_status(void);
199 void uctrl_get_external_status(void);
201 static int
202 uctrl_ioctl(struct inode *inode, struct file *file,
203 unsigned int cmd, unsigned long arg)
205 switch (cmd) {
206 default:
207 return -EINVAL;
209 return 0;
212 static int
213 uctrl_open(struct inode *inode, struct file *file)
215 uctrl_get_event_status();
216 uctrl_get_external_status();
217 return 0;
220 static irqreturn_t uctrl_interrupt(int irq, void *dev_id, struct pt_regs *regs)
222 struct uctrl_driver *driver = (struct uctrl_driver *)dev_id;
223 printk("in uctrl_interrupt\n");
224 return IRQ_HANDLED;
227 static struct file_operations uctrl_fops = {
228 .owner = THIS_MODULE,
229 .llseek = no_llseek,
230 .ioctl = uctrl_ioctl,
231 .open = uctrl_open,
234 static struct miscdevice uctrl_dev = {
235 UCTRL_MINOR,
236 "uctrl",
237 &uctrl_fops
240 /* Wait for space to write, then write to it */
241 #define WRITEUCTLDATA(value) \
243 unsigned int i; \
244 for (i = 0; i < 10000; i++) { \
245 if (UCTRL_STAT_TXNF_STA & driver->regs->uctrl_stat) \
246 break; \
248 dprintk(("write data 0x%02x\n", value)); \
249 driver->regs->uctrl_data = value; \
252 /* Wait for something to read, read it, then clear the bit */
253 #define READUCTLDATA(value) \
255 unsigned int i; \
256 value = 0; \
257 for (i = 0; i < 10000; i++) { \
258 if ((UCTRL_STAT_RXNE_STA & driver->regs->uctrl_stat) == 0) \
259 break; \
260 udelay(1); \
262 value = driver->regs->uctrl_data; \
263 dprintk(("read data 0x%02x\n", value)); \
264 driver->regs->uctrl_stat = UCTRL_STAT_RXNE_STA; \
267 void uctrl_set_video(int status)
269 struct uctrl_driver *driver = &drv;
273 static void uctrl_do_txn(struct uctrl_txn *txn)
275 struct uctrl_driver *driver = &drv;
276 int stat, incnt, outcnt, bytecnt, intr;
277 u32 byte;
279 stat = driver->regs->uctrl_stat;
280 intr = driver->regs->uctrl_intr;
281 driver->regs->uctrl_stat = stat;
283 dprintk(("interrupt stat 0x%x int 0x%x\n", stat, intr));
285 incnt = txn->inbits;
286 outcnt = txn->outbits;
287 byte = (txn->opcode << 8);
288 WRITEUCTLDATA(byte);
290 bytecnt = 0;
291 while (incnt > 0) {
292 byte = (txn->inbuf[bytecnt] << 8);
293 WRITEUCTLDATA(byte);
294 incnt--;
295 bytecnt++;
298 /* Get the ack */
299 READUCTLDATA(byte);
300 dprintk(("ack was %x\n", (byte >> 8)));
302 bytecnt = 0;
303 while (outcnt > 0) {
304 READUCTLDATA(byte);
305 txn->outbuf[bytecnt] = (byte >> 8);
306 dprintk(("set byte to %02x\n", byte));
307 outcnt--;
308 bytecnt++;
312 void uctrl_get_event_status(void)
314 struct uctrl_driver *driver = &drv;
315 struct uctrl_txn txn;
316 u8 outbits[2];
318 txn.opcode = READ_EVENT_STATUS;
319 txn.inbits = 0;
320 txn.outbits = 2;
321 txn.inbuf = NULL;
322 txn.outbuf = outbits;
324 uctrl_do_txn(&txn);
326 dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
327 driver->status.event_status =
328 ((outbits[0] & 0xff) << 8) | (outbits[1] & 0xff);
329 dprintk(("ev is %x\n", driver->status.event_status));
332 void uctrl_get_external_status(void)
334 struct uctrl_driver *driver = &drv;
335 struct uctrl_txn txn;
336 u8 outbits[2];
337 int i, v;
339 txn.opcode = READ_EXTERNAL_STATUS;
340 txn.inbits = 0;
341 txn.outbits = 2;
342 txn.inbuf = NULL;
343 txn.outbuf = outbits;
345 uctrl_do_txn(&txn);
347 dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
348 driver->status.external_status =
349 ((outbits[0] * 256) + (outbits[1]));
350 dprintk(("ex is %x\n", driver->status.external_status));
351 v = driver->status.external_status;
352 for (i = 0; v != 0; i++, v >>= 1) {
353 if (v & 1) {
354 dprintk(("%s%s", " ", uctrl_extstatus[i]));
357 dprintk(("\n"));
361 static int __init ts102_uctrl_init(void)
363 struct uctrl_driver *driver = &drv;
364 int len, i;
365 struct linux_prom_irqs tmp_irq[2];
366 unsigned int vaddr[2] = { 0, 0 };
367 int tmpnode, uctrlnode = prom_getchild(prom_root_node);
369 tmpnode = prom_searchsiblings(uctrlnode, "obio");
371 if (tmpnode)
372 uctrlnode = prom_getchild(tmpnode);
374 uctrlnode = prom_searchsiblings(uctrlnode, "uctrl");
376 if (!uctrlnode)
377 return -ENODEV;
379 /* the prom mapped it for us */
380 len = prom_getproperty(uctrlnode, "address", (void *) vaddr,
381 sizeof(vaddr));
382 driver->regs = (struct uctrl_regs *)vaddr[0];
384 len = prom_getproperty(uctrlnode, "intr", (char *) tmp_irq,
385 sizeof(tmp_irq));
387 /* Flush device */
388 READUCTLDATA(len);
390 if(!driver->irq)
391 driver->irq = tmp_irq[0].pri;
393 request_irq(driver->irq, uctrl_interrupt, 0, "uctrl", driver);
395 if (misc_register(&uctrl_dev)) {
396 printk("%s: unable to get misc minor %d\n",
397 __FUNCTION__, uctrl_dev.minor);
398 free_irq(driver->irq, driver);
399 return -ENODEV;
402 driver->regs->uctrl_intr = UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK;
403 printk("uctrl: 0x%x (irq %s)\n", driver->regs, __irq_itoa(driver->irq));
404 uctrl_get_event_status();
405 uctrl_get_external_status();
406 return 0;
409 static void __exit ts102_uctrl_cleanup(void)
411 struct uctrl_driver *driver = &drv;
413 misc_deregister(&uctrl_dev);
414 if (driver->irq)
415 free_irq(driver->irq, driver);
416 if (driver->regs)
417 driver->regs = NULL;
420 module_init(ts102_uctrl_init);
421 module_exit(ts102_uctrl_cleanup);
422 MODULE_LICENSE("GPL");