?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 2.6.17.7
[linux/fpc-iii.git] / drivers / scsi / sata_sil.c
blob106627299d55f002530bf12ef9e6105614c99175
1 /*
2 * sata_sil.c - Silicon Image SATA
3 *
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
7 *
8 * Copyright 2003-2005 Red Hat, Inc.
9 * Copyright 2003 Benjamin Herrenschmidt
10 *
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
15 * any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 *
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
29 *
30 * Documentation for SiI 3112:
31 * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
32 *
33 * Other errata and documentation available under NDA.
34 *
35 */
36
37 #include <linux/kernel.h>
38 #include <linux/module.h>
39 #include <linux/pci.h>
40 #include <linux/init.h>
41 #include <linux/blkdev.h>
42 #include <linux/delay.h>
43 #include <linux/interrupt.h>
44 #include <linux/device.h>
45 #include <scsi/scsi_host.h>
46 #include <linux/libata.h>
47
48 #define DRV_NAME "sata_sil"
49 #define DRV_VERSION "0.9"
50
51 enum {
52 /*
53 * host flags
54 */
55 SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
56 SIL_FLAG_MOD15WRITE = (1 << 30),
57 SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
58 ATA_FLAG_MMIO,
59
60 /*
61 * Controller IDs
62 */
63 sil_3112 = 0,
64 sil_3512 = 1,
65 sil_3114 = 2,
66
67 /*
68 * Register offsets
69 */
70 SIL_SYSCFG = 0x48,
71
72 /*
73 * Register bits
74 */
75 /* SYSCFG */
76 SIL_MASK_IDE0_INT = (1 << 22),
77 SIL_MASK_IDE1_INT = (1 << 23),
78 SIL_MASK_IDE2_INT = (1 << 24),
79 SIL_MASK_IDE3_INT = (1 << 25),
80 SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT,
81 SIL_MASK_4PORT = SIL_MASK_2PORT |
82 SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT,
83
84 /* BMDMA/BMDMA2 */
85 SIL_INTR_STEERING = (1 << 1),
86
87 /*
88 * Others
89 */
90 SIL_QUIRK_MOD15WRITE = (1 << 0),
91 SIL_QUIRK_UDMA5MAX = (1 << 1),
92 };
93
94 static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
95 static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
96 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
97 static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
98 static void sil_post_set_mode (struct ata_port *ap);
99
100
101 static const struct pci_device_id sil_pci_tbl[] = {
102 { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
103 { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
104 { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
105 { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
106 { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
107 { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
108 { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
109 { } /* terminate list */
110 };
111
112
113 /* TODO firmware versions should be added - eric */
114 static const struct sil_drivelist {
115 const char * product;
116 unsigned int quirk;
117 } sil_blacklist [] = {
118 { "ST320012AS", SIL_QUIRK_MOD15WRITE },
119 { "ST330013AS", SIL_QUIRK_MOD15WRITE },
120 { "ST340017AS", SIL_QUIRK_MOD15WRITE },
121 { "ST360015AS", SIL_QUIRK_MOD15WRITE },
122 { "ST380013AS", SIL_QUIRK_MOD15WRITE },
123 { "ST380023AS", SIL_QUIRK_MOD15WRITE },
124 { "ST3120023AS", SIL_QUIRK_MOD15WRITE },
125 { "ST3160023AS", SIL_QUIRK_MOD15WRITE },
126 { "ST3120026AS", SIL_QUIRK_MOD15WRITE },
127 { "ST3200822AS", SIL_QUIRK_MOD15WRITE },
128 { "ST340014ASL", SIL_QUIRK_MOD15WRITE },
129 { "ST360014ASL", SIL_QUIRK_MOD15WRITE },
130 { "ST380011ASL", SIL_QUIRK_MOD15WRITE },
131 { "ST3120022ASL", SIL_QUIRK_MOD15WRITE },
132 { "ST3160021ASL", SIL_QUIRK_MOD15WRITE },
133 { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX },
134 { }
135 };
136
137 static struct pci_driver sil_pci_driver = {
138 .name = DRV_NAME,
139 .id_table = sil_pci_tbl,
140 .probe = sil_init_one,
141 .remove = ata_pci_remove_one,
142 };
143
144 static struct scsi_host_template sil_sht = {
145 .module = THIS_MODULE,
146 .name = DRV_NAME,
147 .ioctl = ata_scsi_ioctl,
148 .queuecommand = ata_scsi_queuecmd,
149 .can_queue = ATA_DEF_QUEUE,
150 .this_id = ATA_SHT_THIS_ID,
151 .sg_tablesize = LIBATA_MAX_PRD,
152 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
153 .emulated = ATA_SHT_EMULATED,
154 .use_clustering = ATA_SHT_USE_CLUSTERING,
155 .proc_name = DRV_NAME,
156 .dma_boundary = ATA_DMA_BOUNDARY,
157 .slave_configure = ata_scsi_slave_config,
158 .bios_param = ata_std_bios_param,
159 };
160
161 static const struct ata_port_operations sil_ops = {
162 .port_disable = ata_port_disable,
163 .dev_config = sil_dev_config,
164 .tf_load = ata_tf_load,
165 .tf_read = ata_tf_read,
166 .check_status = ata_check_status,
167 .exec_command = ata_exec_command,
168 .dev_select = ata_std_dev_select,
169 .probe_reset = ata_std_probe_reset,
170 .post_set_mode = sil_post_set_mode,
171 .bmdma_setup = ata_bmdma_setup,
172 .bmdma_start = ata_bmdma_start,
173 .bmdma_stop = ata_bmdma_stop,
174 .bmdma_status = ata_bmdma_status,
175 .qc_prep = ata_qc_prep,
176 .qc_issue = ata_qc_issue_prot,
177 .eng_timeout = ata_eng_timeout,
178 .irq_handler = ata_interrupt,
179 .irq_clear = ata_bmdma_irq_clear,
180 .scr_read = sil_scr_read,
181 .scr_write = sil_scr_write,
182 .port_start = ata_port_start,
183 .port_stop = ata_port_stop,
184 .host_stop = ata_pci_host_stop,
185 };
186
187 static const struct ata_port_info sil_port_info[] = {
188 /* sil_3112 */
189 {
190 .sht = &sil_sht,
191 .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE,
192 .pio_mask = 0x1f, /* pio0-4 */
193 .mwdma_mask = 0x07, /* mwdma0-2 */
194 .udma_mask = 0x3f, /* udma0-5 */
195 .port_ops = &sil_ops,
196 },
197 /* sil_3512 */
198 {
199 .sht = &sil_sht,
200 .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
201 .pio_mask = 0x1f, /* pio0-4 */
202 .mwdma_mask = 0x07, /* mwdma0-2 */
203 .udma_mask = 0x3f, /* udma0-5 */
204 .port_ops = &sil_ops,
205 },
206 /* sil_3114 */
207 {
208 .sht = &sil_sht,
209 .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
210 .pio_mask = 0x1f, /* pio0-4 */
211 .mwdma_mask = 0x07, /* mwdma0-2 */
212 .udma_mask = 0x3f, /* udma0-5 */
213 .port_ops = &sil_ops,
214 },
215 };
216
217 /* per-port register offsets */
218 /* TODO: we can probably calculate rather than use a table */
219 static const struct {
220 unsigned long tf; /* ATA taskfile register block */
221 unsigned long ctl; /* ATA control/altstatus register block */
222 unsigned long bmdma; /* DMA register block */
223 unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */
224 unsigned long scr; /* SATA control register block */
225 unsigned long sien; /* SATA Interrupt Enable register */
226 unsigned long xfer_mode;/* data transfer mode register */
227 unsigned long sfis_cfg; /* SATA FIS reception config register */
228 } sil_port[] = {
229 /* port 0 ... */
230 { 0x80, 0x8A, 0x00, 0x40, 0x100, 0x148, 0xb4, 0x14c },
231 { 0xC0, 0xCA, 0x08, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc },
232 { 0x280, 0x28A, 0x200, 0x240, 0x300, 0x348, 0x2b4, 0x34c },
233 { 0x2C0, 0x2CA, 0x208, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc },
234 /* ... port 3 */
235 };
236
237 MODULE_AUTHOR("Jeff Garzik");
238 MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller");
239 MODULE_LICENSE("GPL");
240 MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
241 MODULE_VERSION(DRV_VERSION);
242
243 static int slow_down = 0;
244 module_param(slow_down, int, 0444);
245 MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
246
247
248 static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
249 {
250 u8 cache_line = 0;
251 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line);
252 return cache_line;
253 }
254
255 static void sil_post_set_mode (struct ata_port *ap)
256 {
257 struct ata_host_set *host_set = ap->host_set;
258 struct ata_device *dev;
259 void __iomem *addr =
260 host_set->mmio_base + sil_port[ap->port_no].xfer_mode;
261 u32 tmp, dev_mode[2];
262 unsigned int i;
263
264 for (i = 0; i < 2; i++) {
265 dev = &ap->device[i];
266 if (!ata_dev_present(dev))
267 dev_mode[i] = 0; /* PIO0/1/2 */
268 else if (dev->flags & ATA_DFLAG_PIO)
269 dev_mode[i] = 1; /* PIO3/4 */
270 else
271 dev_mode[i] = 3; /* UDMA */
272 /* value 2 indicates MDMA */
273 }
274
275 tmp = readl(addr);
276 tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0));
277 tmp |= dev_mode[0];
278 tmp |= (dev_mode[1] << 4);
279 writel(tmp, addr);
280 readl(addr); /* flush */
281 }
282
283 static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
284 {
285 unsigned long offset = ap->ioaddr.scr_addr;
286
287 switch (sc_reg) {
288 case SCR_STATUS:
289 return offset + 4;
290 case SCR_ERROR:
291 return offset + 8;
292 case SCR_CONTROL:
293 return offset;
294 default:
295 /* do nothing */
296 break;
297 }
298
299 return 0;
300 }
301
302 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
303 {
304 void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
305 if (mmio)
306 return readl(mmio);
307 return 0xffffffffU;
308 }
309
310 static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
311 {
312 void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
313 if (mmio)
314 writel(val, mmio);
315 }
316
317 /**
318 * sil_dev_config - Apply device/host-specific errata fixups
319 * @ap: Port containing device to be examined
320 * @dev: Device to be examined
321 *
322 * After the IDENTIFY [PACKET] DEVICE step is complete, and a
323 * device is known to be present, this function is called.
324 * We apply two errata fixups which are specific to Silicon Image,
325 * a Seagate and a Maxtor fixup.
326 *
327 * For certain Seagate devices, we must limit the maximum sectors
328 * to under 8K.
329 *
330 * For certain Maxtor devices, we must not program the drive
331 * beyond udma5.
332 *
333 * Both fixups are unfairly pessimistic. As soon as I get more
334 * information on these errata, I will create a more exhaustive
335 * list, and apply the fixups to only the specific
336 * devices/hosts/firmwares that need it.
337 *
338 * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted
339 * The Maxtor quirk is in the blacklist, but I'm keeping the original
340 * pessimistic fix for the following reasons...
341 * - There seems to be less info on it, only one device gleaned off the
342 * Windows driver, maybe only one is affected. More info would be greatly
343 * appreciated.
344 * - But then again UDMA5 is hardly anything to complain about
345 */
346 static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
347 {
348 unsigned int n, quirks = 0;
349 unsigned char model_num[41];
350
351 ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
352
353 for (n = 0; sil_blacklist[n].product; n++)
354 if (!strcmp(sil_blacklist[n].product, model_num)) {
355 quirks = sil_blacklist[n].quirk;
356 break;
357 }
358
359 /* limit requests to 15 sectors */
360 if (slow_down ||
361 ((ap->flags & SIL_FLAG_MOD15WRITE) &&
362 (quirks & SIL_QUIRK_MOD15WRITE))) {
363 printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n",
364 ap->id, dev->devno);
365 dev->max_sectors = 15;
366 return;
367 }
368
369 /* limit to udma5 */
370 if (quirks & SIL_QUIRK_UDMA5MAX) {
371 printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n",
372 ap->id, dev->devno, model_num);
373 dev->udma_mask &= ATA_UDMA5;
374 return;
375 }
376 }
377
378 static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
379 {
380 static int printed_version;
381 struct ata_probe_ent *probe_ent = NULL;
382 unsigned long base;
383 void __iomem *mmio_base;
384 int rc;
385 unsigned int i;
386 int pci_dev_busy = 0;
387 u32 tmp, irq_mask;
388 u8 cls;
389
390 if (!printed_version++)
391 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
392
393 /*
394 * If this driver happens to only be useful on Apple's K2, then
395 * we should check that here as it has a normal Serverworks ID
396 */
397 rc = pci_enable_device(pdev);
398 if (rc)
399 return rc;
400
401 rc = pci_request_regions(pdev, DRV_NAME);
402 if (rc) {
403 pci_dev_busy = 1;
404 goto err_out;
405 }
406
407 rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
408 if (rc)
409 goto err_out_regions;
410 rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
411 if (rc)
412 goto err_out_regions;
413
414 probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
415 if (probe_ent == NULL) {
416 rc = -ENOMEM;
417 goto err_out_regions;
418 }
419
420 INIT_LIST_HEAD(&probe_ent->node);
421 probe_ent->dev = pci_dev_to_dev(pdev);
422 probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
423 probe_ent->sht = sil_port_info[ent->driver_data].sht;
424 probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
425 probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
426 probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
427 probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
428 probe_ent->irq = pdev->irq;
429 probe_ent->irq_flags = SA_SHIRQ;
430 probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags;
431
432 mmio_base = pci_iomap(pdev, 5, 0);
433 if (mmio_base == NULL) {
434 rc = -ENOMEM;
435 goto err_out_free_ent;
436 }
437
438 probe_ent->mmio_base = mmio_base;
439
440 base = (unsigned long) mmio_base;
441
442 for (i = 0; i < probe_ent->n_ports; i++) {
443 probe_ent->port[i].cmd_addr = base + sil_port[i].tf;
444 probe_ent->port[i].altstatus_addr =
445 probe_ent->port[i].ctl_addr = base + sil_port[i].ctl;
446 probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma;
447 probe_ent->port[i].scr_addr = base + sil_port[i].scr;
448 ata_std_ports(&probe_ent->port[i]);
449 }
450
451 /* Initialize FIFO PCI bus arbitration */
452 cls = sil_get_device_cache_line(pdev);
453 if (cls) {
454 cls >>= 3;
455 cls++; /* cls = (line_size/8)+1 */
456 for (i = 0; i < probe_ent->n_ports; i++)
457 writew(cls << 8 | cls,
458 mmio_base + sil_port[i].fifo_cfg);
459 } else
460 dev_printk(KERN_WARNING, &pdev->dev,
461 "cache line size not set. Driver may not function\n");
462
463 /* Apply R_ERR on DMA activate FIS errata workaround */
464 if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
465 int cnt;
466
467 for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
468 tmp = readl(mmio_base + sil_port[i].sfis_cfg);
469 if ((tmp & 0x3) != 0x01)
470 continue;
471 if (!cnt)
472 dev_printk(KERN_INFO, &pdev->dev,
473 "Applying R_ERR on DMA activate "
474 "FIS errata fix\n");
475 writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
476 cnt++;
477 }
478 }
479
480 if (ent->driver_data == sil_3114) {
481 irq_mask = SIL_MASK_4PORT;
482
483 /* flip the magic "make 4 ports work" bit */
484 tmp = readl(mmio_base + sil_port[2].bmdma);
485 if ((tmp & SIL_INTR_STEERING) == 0)
486 writel(tmp | SIL_INTR_STEERING,
487 mmio_base + sil_port[2].bmdma);
488
489 } else {
490 irq_mask = SIL_MASK_2PORT;
491 }
492
493 /* make sure IDE0/1/2/3 interrupts are not masked */
494 tmp = readl(mmio_base + SIL_SYSCFG);
495 if (tmp & irq_mask) {
496 tmp &= ~irq_mask;
497 writel(tmp, mmio_base + SIL_SYSCFG);
498 readl(mmio_base + SIL_SYSCFG); /* flush */
499 }
500
501 /* mask all SATA phy-related interrupts */
502 /* TODO: unmask bit 6 (SError N bit) for hotplug */
503 for (i = 0; i < probe_ent->n_ports; i++)
504 writel(0, mmio_base + sil_port[i].sien);
505
506 pci_set_master(pdev);
507
508 /* FIXME: check ata_device_add return value */
509 ata_device_add(probe_ent);
510 kfree(probe_ent);
511
512 return 0;
513
514 err_out_free_ent:
515 kfree(probe_ent);
516 err_out_regions:
517 pci_release_regions(pdev);
518 err_out:
519 if (!pci_dev_busy)
520 pci_disable_device(pdev);
521 return rc;
522 }
523
524 static int __init sil_init(void)
525 {
526 return pci_module_init(&sil_pci_driver);
527 }
528
529 static void __exit sil_exit(void)
530 {
531 pci_unregister_driver(&sil_pci_driver);
532 }
533
534
535 module_init(sil_init);
536 module_exit(sil_exit);
Linux with added FPC-III support