2 * Driver for Alauda-based card readers
4 * Current development and maintenance by:
5 * (c) 2005 Daniel Drake <dsd@gentoo.org>
7 * The 'Alauda' is a chip manufacturered by RATOC for OEM use.
9 * Alauda implements a vendor-specific command set to access two media reader
10 * ports (XD, SmartMedia). This driver converts SCSI commands to the commands
11 * which are accepted by these devices.
13 * The driver was developed through reverse-engineering, with the help of the
14 * sddr09 driver which has many similarities, and with some help from the
15 * (very old) vendor-supplied GPL sma03 driver.
17 * For protocol info, see http://alauda.sourceforge.net
19 * This program is free software; you can redistribute it and/or modify it
20 * under the terms of the GNU General Public License as published by the
21 * Free Software Foundation; either version 2, or (at your option) any
24 * This program is distributed in the hope that it will be useful, but
25 * WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
27 * General Public License for more details.
29 * You should have received a copy of the GNU General Public License along
30 * with this program; if not, write to the Free Software Foundation, Inc.,
31 * 675 Mass Ave, Cambridge, MA 02139, USA.
34 #include <scsi/scsi.h>
35 #include <scsi/scsi_cmnd.h>
36 #include <scsi/scsi_device.h>
39 #include "transport.h"
44 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
45 #define LSB_of(s) ((s)&0xFF)
46 #define MSB_of(s) ((s)>>8)
48 #define MEDIA_PORT(us) us->srb->device->lun
49 #define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)]
51 #define PBA_LO(pba) ((pba & 0xF) << 5)
52 #define PBA_HI(pba) (pba >> 3)
53 #define PBA_ZONE(pba) (pba >> 11)
59 struct alauda_card_info
{
60 unsigned char id
; /* id byte */
61 unsigned char chipshift
; /* 1<<cs bytes total capacity */
62 unsigned char pageshift
; /* 1<<ps bytes in a page */
63 unsigned char blockshift
; /* 1<<bs pages per block */
64 unsigned char zoneshift
; /* 1<<zs blocks per zone */
67 static struct alauda_card_info alauda_card_ids
[] = {
69 { 0x6e, 20, 8, 4, 8}, /* 1 MB */
70 { 0xe8, 20, 8, 4, 8}, /* 1 MB */
71 { 0xec, 20, 8, 4, 8}, /* 1 MB */
72 { 0x64, 21, 8, 4, 9}, /* 2 MB */
73 { 0xea, 21, 8, 4, 9}, /* 2 MB */
74 { 0x6b, 22, 9, 4, 9}, /* 4 MB */
75 { 0xe3, 22, 9, 4, 9}, /* 4 MB */
76 { 0xe5, 22, 9, 4, 9}, /* 4 MB */
77 { 0xe6, 23, 9, 4, 10}, /* 8 MB */
78 { 0x73, 24, 9, 5, 10}, /* 16 MB */
79 { 0x75, 25, 9, 5, 10}, /* 32 MB */
80 { 0x76, 26, 9, 5, 10}, /* 64 MB */
81 { 0x79, 27, 9, 5, 10}, /* 128 MB */
82 { 0x71, 28, 9, 5, 10}, /* 256 MB */
85 { 0x5d, 21, 9, 4, 8}, /* 2 MB */
86 { 0xd5, 22, 9, 4, 9}, /* 4 MB */
87 { 0xd6, 23, 9, 4, 10}, /* 8 MB */
88 { 0x57, 24, 9, 4, 11}, /* 16 MB */
89 { 0x58, 25, 9, 4, 12}, /* 32 MB */
93 static struct alauda_card_info
*alauda_card_find_id(unsigned char id
) {
96 for (i
= 0; alauda_card_ids
[i
].id
!= 0; i
++)
97 if (alauda_card_ids
[i
].id
== id
)
98 return &(alauda_card_ids
[i
]);
106 static unsigned char parity
[256];
107 static unsigned char ecc2
[256];
109 static void nand_init_ecc(void) {
113 for (i
= 1; i
< 256; i
++)
114 parity
[i
] = (parity
[i
&(i
-1)] ^ 1);
116 for (i
= 0; i
< 256; i
++) {
118 for (j
= 0; j
< 8; j
++) {
128 ecc2
[i
] = ~(a
^ (a
<<1) ^ (parity
[i
] ? 0xa8 : 0));
132 /* compute 3-byte ecc on 256 bytes */
133 static void nand_compute_ecc(unsigned char *data
, unsigned char *ecc
) {
135 unsigned char par
, bit
, bits
[8];
138 for (j
= 0; j
< 8; j
++)
141 /* collect 16 checksum bits */
142 for (i
= 0; i
< 256; i
++) {
144 bit
= parity
[data
[i
]];
145 for (j
= 0; j
< 8; j
++)
146 if ((i
& (1<<j
)) == 0)
150 /* put 4+4+4 = 12 bits in the ecc */
151 a
= (bits
[3] << 6) + (bits
[2] << 4) + (bits
[1] << 2) + bits
[0];
152 ecc
[0] = ~(a
^ (a
<<1) ^ (parity
[par
] ? 0xaa : 0));
154 a
= (bits
[7] << 6) + (bits
[6] << 4) + (bits
[5] << 2) + bits
[4];
155 ecc
[1] = ~(a
^ (a
<<1) ^ (parity
[par
] ? 0xaa : 0));
160 static int nand_compare_ecc(unsigned char *data
, unsigned char *ecc
) {
161 return (data
[0] == ecc
[0] && data
[1] == ecc
[1] && data
[2] == ecc
[2]);
164 static void nand_store_ecc(unsigned char *data
, unsigned char *ecc
) {
165 memcpy(data
, ecc
, 3);
173 * Forget our PBA <---> LBA mappings for a particular port
175 static void alauda_free_maps (struct alauda_media_info
*media_info
)
177 unsigned int shift
= media_info
->zoneshift
178 + media_info
->blockshift
+ media_info
->pageshift
;
179 unsigned int num_zones
= media_info
->capacity
>> shift
;
182 if (media_info
->lba_to_pba
!= NULL
)
183 for (i
= 0; i
< num_zones
; i
++) {
184 kfree(media_info
->lba_to_pba
[i
]);
185 media_info
->lba_to_pba
[i
] = NULL
;
188 if (media_info
->pba_to_lba
!= NULL
)
189 for (i
= 0; i
< num_zones
; i
++) {
190 kfree(media_info
->pba_to_lba
[i
]);
191 media_info
->pba_to_lba
[i
] = NULL
;
196 * Returns 2 bytes of status data
197 * The first byte describes media status, and second byte describes door status
199 static int alauda_get_media_status(struct us_data
*us
, unsigned char *data
)
202 unsigned char command
;
204 if (MEDIA_PORT(us
) == ALAUDA_PORT_XD
)
205 command
= ALAUDA_GET_XD_MEDIA_STATUS
;
207 command
= ALAUDA_GET_SM_MEDIA_STATUS
;
209 rc
= usb_stor_ctrl_transfer(us
, us
->recv_ctrl_pipe
,
210 command
, 0xc0, 0, 1, data
, 2);
212 US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n",
219 * Clears the "media was changed" bit so that we know when it changes again
222 static int alauda_ack_media(struct us_data
*us
)
224 unsigned char command
;
226 if (MEDIA_PORT(us
) == ALAUDA_PORT_XD
)
227 command
= ALAUDA_ACK_XD_MEDIA_CHANGE
;
229 command
= ALAUDA_ACK_SM_MEDIA_CHANGE
;
231 return usb_stor_ctrl_transfer(us
, us
->send_ctrl_pipe
,
232 command
, 0x40, 0, 1, NULL
, 0);
236 * Retrieves a 4-byte media signature, which indicates manufacturer, capacity,
237 * and some other details.
239 static int alauda_get_media_signature(struct us_data
*us
, unsigned char *data
)
241 unsigned char command
;
243 if (MEDIA_PORT(us
) == ALAUDA_PORT_XD
)
244 command
= ALAUDA_GET_XD_MEDIA_SIG
;
246 command
= ALAUDA_GET_SM_MEDIA_SIG
;
248 return usb_stor_ctrl_transfer(us
, us
->recv_ctrl_pipe
,
249 command
, 0xc0, 0, 0, data
, 4);
253 * Resets the media status (but not the whole device?)
255 static int alauda_reset_media(struct us_data
*us
)
257 unsigned char *command
= us
->iobuf
;
259 memset(command
, 0, 9);
260 command
[0] = ALAUDA_BULK_CMD
;
261 command
[1] = ALAUDA_BULK_RESET_MEDIA
;
262 command
[8] = MEDIA_PORT(us
);
264 return usb_stor_bulk_transfer_buf(us
, us
->send_bulk_pipe
,
269 * Examines the media and deduces capacity, etc.
271 static int alauda_init_media(struct us_data
*us
)
273 unsigned char *data
= us
->iobuf
;
275 struct alauda_card_info
*media_info
;
276 unsigned int num_zones
;
281 if (alauda_get_media_status(us
, data
) != USB_STOR_XFER_GOOD
)
282 return USB_STOR_TRANSPORT_ERROR
;
288 US_DEBUGP("alauda_init_media: We are ready for action!\n");
290 if (alauda_ack_media(us
) != USB_STOR_XFER_GOOD
)
291 return USB_STOR_TRANSPORT_ERROR
;
295 if (alauda_get_media_status(us
, data
) != USB_STOR_XFER_GOOD
)
296 return USB_STOR_TRANSPORT_ERROR
;
298 if (data
[0] != 0x14) {
299 US_DEBUGP("alauda_init_media: Media not ready after ack\n");
300 return USB_STOR_TRANSPORT_ERROR
;
303 if (alauda_get_media_signature(us
, data
) != USB_STOR_XFER_GOOD
)
304 return USB_STOR_TRANSPORT_ERROR
;
306 US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n",
307 data
[0], data
[1], data
[2], data
[3]);
308 media_info
= alauda_card_find_id(data
[1]);
309 if (media_info
== NULL
) {
310 printk("alauda_init_media: Unrecognised media signature: "
311 "%02X %02X %02X %02X\n",
312 data
[0], data
[1], data
[2], data
[3]);
313 return USB_STOR_TRANSPORT_ERROR
;
316 MEDIA_INFO(us
).capacity
= 1 << media_info
->chipshift
;
317 US_DEBUGP("Found media with capacity: %ldMB\n",
318 MEDIA_INFO(us
).capacity
>> 20);
320 MEDIA_INFO(us
).pageshift
= media_info
->pageshift
;
321 MEDIA_INFO(us
).blockshift
= media_info
->blockshift
;
322 MEDIA_INFO(us
).zoneshift
= media_info
->zoneshift
;
324 MEDIA_INFO(us
).pagesize
= 1 << media_info
->pageshift
;
325 MEDIA_INFO(us
).blocksize
= 1 << media_info
->blockshift
;
326 MEDIA_INFO(us
).zonesize
= 1 << media_info
->zoneshift
;
328 MEDIA_INFO(us
).uzonesize
= ((1 << media_info
->zoneshift
) / 128) * 125;
329 MEDIA_INFO(us
).blockmask
= MEDIA_INFO(us
).blocksize
- 1;
331 num_zones
= MEDIA_INFO(us
).capacity
>> (MEDIA_INFO(us
).zoneshift
332 + MEDIA_INFO(us
).blockshift
+ MEDIA_INFO(us
).pageshift
);
333 MEDIA_INFO(us
).pba_to_lba
= kcalloc(num_zones
, sizeof(u16
*), GFP_NOIO
);
334 MEDIA_INFO(us
).lba_to_pba
= kcalloc(num_zones
, sizeof(u16
*), GFP_NOIO
);
336 if (alauda_reset_media(us
) != USB_STOR_XFER_GOOD
)
337 return USB_STOR_TRANSPORT_ERROR
;
339 return USB_STOR_TRANSPORT_GOOD
;
343 * Examines the media status and does the right thing when the media has gone,
344 * appeared, or changed.
346 static int alauda_check_media(struct us_data
*us
)
348 struct alauda_info
*info
= (struct alauda_info
*) us
->extra
;
349 unsigned char status
[2];
352 rc
= alauda_get_media_status(us
, status
);
354 /* Check for no media or door open */
355 if ((status
[0] & 0x80) || ((status
[0] & 0x1F) == 0x10)
356 || ((status
[1] & 0x01) == 0)) {
357 US_DEBUGP("alauda_check_media: No media, or door open\n");
358 alauda_free_maps(&MEDIA_INFO(us
));
359 info
->sense_key
= 0x02;
360 info
->sense_asc
= 0x3A;
361 info
->sense_ascq
= 0x00;
362 return USB_STOR_TRANSPORT_FAILED
;
365 /* Check for media change */
366 if (status
[0] & 0x08) {
367 US_DEBUGP("alauda_check_media: Media change detected\n");
368 alauda_free_maps(&MEDIA_INFO(us
));
369 alauda_init_media(us
);
371 info
->sense_key
= UNIT_ATTENTION
;
372 info
->sense_asc
= 0x28;
373 info
->sense_ascq
= 0x00;
374 return USB_STOR_TRANSPORT_FAILED
;
377 return USB_STOR_TRANSPORT_GOOD
;
381 * Checks the status from the 2nd status register
382 * Returns 3 bytes of status data, only the first is known
384 static int alauda_check_status2(struct us_data
*us
)
387 unsigned char command
[] = {
388 ALAUDA_BULK_CMD
, ALAUDA_BULK_GET_STATUS2
,
389 0, 0, 0, 0, 3, 0, MEDIA_PORT(us
)
391 unsigned char data
[3];
393 rc
= usb_stor_bulk_transfer_buf(us
, us
->send_bulk_pipe
,
395 if (rc
!= USB_STOR_XFER_GOOD
)
398 rc
= usb_stor_bulk_transfer_buf(us
, us
->recv_bulk_pipe
,
400 if (rc
!= USB_STOR_XFER_GOOD
)
403 US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data
[0], data
[1], data
[2]);
404 if (data
[0] & ALAUDA_STATUS_ERROR
)
405 return USB_STOR_XFER_ERROR
;
407 return USB_STOR_XFER_GOOD
;
411 * Gets the redundancy data for the first page of a PBA
414 static int alauda_get_redu_data(struct us_data
*us
, u16 pba
, unsigned char *data
)
417 unsigned char command
[] = {
418 ALAUDA_BULK_CMD
, ALAUDA_BULK_GET_REDU_DATA
,
419 PBA_HI(pba
), PBA_ZONE(pba
), 0, PBA_LO(pba
), 0, 0, MEDIA_PORT(us
)
422 rc
= usb_stor_bulk_transfer_buf(us
, us
->send_bulk_pipe
,
424 if (rc
!= USB_STOR_XFER_GOOD
)
427 return usb_stor_bulk_transfer_buf(us
, us
->recv_bulk_pipe
,
432 * Finds the first unused PBA in a zone
433 * Returns the absolute PBA of an unused PBA, or 0 if none found.
435 static u16
alauda_find_unused_pba(struct alauda_media_info
*info
,
438 u16
*pba_to_lba
= info
->pba_to_lba
[zone
];
441 for (i
= 0; i
< info
->zonesize
; i
++)
442 if (pba_to_lba
[i
] == UNDEF
)
443 return (zone
<< info
->zoneshift
) + i
;
449 * Reads the redundancy data for all PBA's in a zone
450 * Produces lba <--> pba mappings
452 static int alauda_read_map(struct us_data
*us
, unsigned int zone
)
454 unsigned char *data
= us
->iobuf
;
457 unsigned int zonesize
= MEDIA_INFO(us
).zonesize
;
458 unsigned int uzonesize
= MEDIA_INFO(us
).uzonesize
;
459 unsigned int lba_offset
, lba_real
, blocknum
;
460 unsigned int zone_base_lba
= zone
* uzonesize
;
461 unsigned int zone_base_pba
= zone
* zonesize
;
462 u16
*lba_to_pba
= kcalloc(zonesize
, sizeof(u16
), GFP_NOIO
);
463 u16
*pba_to_lba
= kcalloc(zonesize
, sizeof(u16
), GFP_NOIO
);
464 if (lba_to_pba
== NULL
|| pba_to_lba
== NULL
) {
465 result
= USB_STOR_TRANSPORT_ERROR
;
469 US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone
);
471 /* 1024 PBA's per zone */
472 for (i
= 0; i
< zonesize
; i
++)
473 lba_to_pba
[i
] = pba_to_lba
[i
] = UNDEF
;
475 for (i
= 0; i
< zonesize
; i
++) {
476 blocknum
= zone_base_pba
+ i
;
478 result
= alauda_get_redu_data(us
, blocknum
, data
);
479 if (result
!= USB_STOR_XFER_GOOD
) {
480 result
= USB_STOR_TRANSPORT_ERROR
;
484 /* special PBAs have control field 0^16 */
485 for (j
= 0; j
< 16; j
++)
488 pba_to_lba
[i
] = UNUSABLE
;
489 US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum
);
493 /* unwritten PBAs have control field FF^16 */
494 for (j
= 0; j
< 16; j
++)
500 /* normal PBAs start with six FFs */
502 US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: "
503 "reserved area = %02X%02X%02X%02X "
504 "data status %02X block status %02X\n",
505 blocknum
, data
[0], data
[1], data
[2], data
[3],
507 pba_to_lba
[i
] = UNUSABLE
;
511 if ((data
[6] >> 4) != 0x01) {
512 US_DEBUGP("alauda_read_map: PBA %d has invalid address "
513 "field %02X%02X/%02X%02X\n",
514 blocknum
, data
[6], data
[7], data
[11], data
[12]);
515 pba_to_lba
[i
] = UNUSABLE
;
519 /* check even parity */
520 if (parity
[data
[6] ^ data
[7]]) {
521 printk("alauda_read_map: Bad parity in LBA for block %d"
522 " (%02X %02X)\n", i
, data
[6], data
[7]);
523 pba_to_lba
[i
] = UNUSABLE
;
527 lba_offset
= short_pack(data
[7], data
[6]);
528 lba_offset
= (lba_offset
& 0x07FF) >> 1;
529 lba_real
= lba_offset
+ zone_base_lba
;
532 * Every 1024 physical blocks ("zone"), the LBA numbers
533 * go back to zero, but are within a higher block of LBA's.
534 * Also, there is a maximum of 1000 LBA's per zone.
535 * In other words, in PBA 1024-2047 you will find LBA 0-999
536 * which are really LBA 1000-1999. This allows for 24 bad
537 * or special physical blocks per zone.
540 if (lba_offset
>= uzonesize
) {
541 printk("alauda_read_map: Bad low LBA %d for block %d\n",
546 if (lba_to_pba
[lba_offset
] != UNDEF
) {
547 printk("alauda_read_map: LBA %d seen for PBA %d and %d\n",
548 lba_real
, lba_to_pba
[lba_offset
], blocknum
);
552 pba_to_lba
[i
] = lba_real
;
553 lba_to_pba
[lba_offset
] = blocknum
;
557 MEDIA_INFO(us
).lba_to_pba
[zone
] = lba_to_pba
;
558 MEDIA_INFO(us
).pba_to_lba
[zone
] = pba_to_lba
;
570 * Checks to see whether we have already mapped a certain zone
571 * If we haven't, the map is generated
573 static void alauda_ensure_map_for_zone(struct us_data
*us
, unsigned int zone
)
575 if (MEDIA_INFO(us
).lba_to_pba
[zone
] == NULL
576 || MEDIA_INFO(us
).pba_to_lba
[zone
] == NULL
)
577 alauda_read_map(us
, zone
);
581 * Erases an entire block
583 static int alauda_erase_block(struct us_data
*us
, u16 pba
)
586 unsigned char command
[] = {
587 ALAUDA_BULK_CMD
, ALAUDA_BULK_ERASE_BLOCK
, PBA_HI(pba
),
588 PBA_ZONE(pba
), 0, PBA_LO(pba
), 0x02, 0, MEDIA_PORT(us
)
590 unsigned char buf
[2];
592 US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba
);
594 rc
= usb_stor_bulk_transfer_buf(us
, us
->send_bulk_pipe
,
596 if (rc
!= USB_STOR_XFER_GOOD
)
599 rc
= usb_stor_bulk_transfer_buf(us
, us
->recv_bulk_pipe
,
601 if (rc
!= USB_STOR_XFER_GOOD
)
604 US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n",
610 * Reads data from a certain offset page inside a PBA, including interleaved
611 * redundancy data. Returns (pagesize+64)*pages bytes in data.
613 static int alauda_read_block_raw(struct us_data
*us
, u16 pba
,
614 unsigned int page
, unsigned int pages
, unsigned char *data
)
617 unsigned char command
[] = {
618 ALAUDA_BULK_CMD
, ALAUDA_BULK_READ_BLOCK
, PBA_HI(pba
),
619 PBA_ZONE(pba
), 0, PBA_LO(pba
) + page
, pages
, 0, MEDIA_PORT(us
)
622 US_DEBUGP("alauda_read_block: pba %d page %d count %d\n",
625 rc
= usb_stor_bulk_transfer_buf(us
, us
->send_bulk_pipe
,
627 if (rc
!= USB_STOR_XFER_GOOD
)
630 return usb_stor_bulk_transfer_buf(us
, us
->recv_bulk_pipe
,
631 data
, (MEDIA_INFO(us
).pagesize
+ 64) * pages
, NULL
);
635 * Reads data from a certain offset page inside a PBA, excluding redundancy
636 * data. Returns pagesize*pages bytes in data. Note that data must be big enough
637 * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra'
638 * trailing bytes outside this function.
640 static int alauda_read_block(struct us_data
*us
, u16 pba
,
641 unsigned int page
, unsigned int pages
, unsigned char *data
)
644 unsigned int pagesize
= MEDIA_INFO(us
).pagesize
;
646 rc
= alauda_read_block_raw(us
, pba
, page
, pages
, data
);
647 if (rc
!= USB_STOR_XFER_GOOD
)
650 /* Cut out the redundancy data */
651 for (i
= 0; i
< pages
; i
++) {
652 int dest_offset
= i
* pagesize
;
653 int src_offset
= i
* (pagesize
+ 64);
654 memmove(data
+ dest_offset
, data
+ src_offset
, pagesize
);
661 * Writes an entire block of data and checks status after write.
662 * Redundancy data must be already included in data. Data should be
663 * (pagesize+64)*blocksize bytes in length.
665 static int alauda_write_block(struct us_data
*us
, u16 pba
, unsigned char *data
)
668 struct alauda_info
*info
= (struct alauda_info
*) us
->extra
;
669 unsigned char command
[] = {
670 ALAUDA_BULK_CMD
, ALAUDA_BULK_WRITE_BLOCK
, PBA_HI(pba
),
671 PBA_ZONE(pba
), 0, PBA_LO(pba
), 32, 0, MEDIA_PORT(us
)
674 US_DEBUGP("alauda_write_block: pba %d\n", pba
);
676 rc
= usb_stor_bulk_transfer_buf(us
, us
->send_bulk_pipe
,
678 if (rc
!= USB_STOR_XFER_GOOD
)
681 rc
= usb_stor_bulk_transfer_buf(us
, info
->wr_ep
, data
,
682 (MEDIA_INFO(us
).pagesize
+ 64) * MEDIA_INFO(us
).blocksize
,
684 if (rc
!= USB_STOR_XFER_GOOD
)
687 return alauda_check_status2(us
);
691 * Write some data to a specific LBA.
693 static int alauda_write_lba(struct us_data
*us
, u16 lba
,
694 unsigned int page
, unsigned int pages
,
695 unsigned char *ptr
, unsigned char *blockbuffer
)
697 u16 pba
, lbap
, new_pba
;
698 unsigned char *bptr
, *cptr
, *xptr
;
699 unsigned char ecc
[3];
701 unsigned int uzonesize
= MEDIA_INFO(us
).uzonesize
;
702 unsigned int zonesize
= MEDIA_INFO(us
).zonesize
;
703 unsigned int pagesize
= MEDIA_INFO(us
).pagesize
;
704 unsigned int blocksize
= MEDIA_INFO(us
).blocksize
;
705 unsigned int lba_offset
= lba
% uzonesize
;
706 unsigned int new_pba_offset
;
707 unsigned int zone
= lba
/ uzonesize
;
709 alauda_ensure_map_for_zone(us
, zone
);
711 pba
= MEDIA_INFO(us
).lba_to_pba
[zone
][lba_offset
];
713 /* Maybe it is impossible to write to PBA 1.
714 Fake success, but don't do anything. */
715 printk("alauda_write_lba: avoid writing to pba 1\n");
716 return USB_STOR_TRANSPORT_GOOD
;
719 new_pba
= alauda_find_unused_pba(&MEDIA_INFO(us
), zone
);
721 printk("alauda_write_lba: Out of unused blocks\n");
722 return USB_STOR_TRANSPORT_ERROR
;
725 /* read old contents */
727 result
= alauda_read_block_raw(us
, pba
, 0,
728 blocksize
, blockbuffer
);
729 if (result
!= USB_STOR_XFER_GOOD
)
732 memset(blockbuffer
, 0, blocksize
* (pagesize
+ 64));
735 lbap
= (lba_offset
<< 1) | 0x1000;
736 if (parity
[MSB_of(lbap
) ^ LSB_of(lbap
)])
739 /* check old contents and fill lba */
740 for (i
= 0; i
< blocksize
; i
++) {
741 bptr
= blockbuffer
+ (i
* (pagesize
+ 64));
742 cptr
= bptr
+ pagesize
;
743 nand_compute_ecc(bptr
, ecc
);
744 if (!nand_compare_ecc(cptr
+13, ecc
)) {
745 US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n",
747 nand_store_ecc(cptr
+13, ecc
);
749 nand_compute_ecc(bptr
+ (pagesize
/ 2), ecc
);
750 if (!nand_compare_ecc(cptr
+8, ecc
)) {
751 US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n",
753 nand_store_ecc(cptr
+8, ecc
);
755 cptr
[6] = cptr
[11] = MSB_of(lbap
);
756 cptr
[7] = cptr
[12] = LSB_of(lbap
);
759 /* copy in new stuff and compute ECC */
761 for (i
= page
; i
< page
+pages
; i
++) {
762 bptr
= blockbuffer
+ (i
* (pagesize
+ 64));
763 cptr
= bptr
+ pagesize
;
764 memcpy(bptr
, xptr
, pagesize
);
766 nand_compute_ecc(bptr
, ecc
);
767 nand_store_ecc(cptr
+13, ecc
);
768 nand_compute_ecc(bptr
+ (pagesize
/ 2), ecc
);
769 nand_store_ecc(cptr
+8, ecc
);
772 result
= alauda_write_block(us
, new_pba
, blockbuffer
);
773 if (result
!= USB_STOR_XFER_GOOD
)
776 new_pba_offset
= new_pba
- (zone
* zonesize
);
777 MEDIA_INFO(us
).pba_to_lba
[zone
][new_pba_offset
] = lba
;
778 MEDIA_INFO(us
).lba_to_pba
[zone
][lba_offset
] = new_pba
;
779 US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n",
783 unsigned int pba_offset
= pba
- (zone
* zonesize
);
784 result
= alauda_erase_block(us
, pba
);
785 if (result
!= USB_STOR_XFER_GOOD
)
787 MEDIA_INFO(us
).pba_to_lba
[zone
][pba_offset
] = UNDEF
;
790 return USB_STOR_TRANSPORT_GOOD
;
794 * Read data from a specific sector address
796 static int alauda_read_data(struct us_data
*us
, unsigned long address
,
797 unsigned int sectors
)
799 unsigned char *buffer
;
801 unsigned int page
, len
, index
, offset
;
802 unsigned int blockshift
= MEDIA_INFO(us
).blockshift
;
803 unsigned int pageshift
= MEDIA_INFO(us
).pageshift
;
804 unsigned int blocksize
= MEDIA_INFO(us
).blocksize
;
805 unsigned int pagesize
= MEDIA_INFO(us
).pagesize
;
806 unsigned int uzonesize
= MEDIA_INFO(us
).uzonesize
;
810 * Since we only read in one block at a time, we have to create
811 * a bounce buffer and move the data a piece at a time between the
812 * bounce buffer and the actual transfer buffer.
813 * We make this buffer big enough to hold temporary redundancy data,
814 * which we use when reading the data blocks.
817 len
= min(sectors
, blocksize
) * (pagesize
+ 64);
818 buffer
= kmalloc(len
, GFP_NOIO
);
819 if (buffer
== NULL
) {
820 printk("alauda_read_data: Out of memory\n");
821 return USB_STOR_TRANSPORT_ERROR
;
824 /* Figure out the initial LBA and page */
825 lba
= address
>> blockshift
;
826 page
= (address
& MEDIA_INFO(us
).blockmask
);
827 max_lba
= MEDIA_INFO(us
).capacity
>> (blockshift
+ pageshift
);
829 result
= USB_STOR_TRANSPORT_GOOD
;
832 while (sectors
> 0) {
833 unsigned int zone
= lba
/ uzonesize
; /* integer division */
834 unsigned int lba_offset
= lba
- (zone
* uzonesize
);
837 alauda_ensure_map_for_zone(us
, zone
);
839 /* Not overflowing capacity? */
840 if (lba
>= max_lba
) {
841 US_DEBUGP("Error: Requested lba %u exceeds "
842 "maximum %u\n", lba
, max_lba
);
843 result
= USB_STOR_TRANSPORT_ERROR
;
847 /* Find number of pages we can read in this block */
848 pages
= min(sectors
, blocksize
- page
);
849 len
= pages
<< pageshift
;
851 /* Find where this lba lives on disk */
852 pba
= MEDIA_INFO(us
).lba_to_pba
[zone
][lba_offset
];
854 if (pba
== UNDEF
) { /* this lba was never written */
855 US_DEBUGP("Read %d zero pages (LBA %d) page %d\n",
858 /* This is not really an error. It just means
859 that the block has never been written.
860 Instead of returning USB_STOR_TRANSPORT_ERROR
861 it is better to return all zero data. */
863 memset(buffer
, 0, len
);
865 US_DEBUGP("Read %d pages, from PBA %d"
866 " (LBA %d) page %d\n",
867 pages
, pba
, lba
, page
);
869 result
= alauda_read_block(us
, pba
, page
, pages
, buffer
);
870 if (result
!= USB_STOR_TRANSPORT_GOOD
)
874 /* Store the data in the transfer buffer */
875 usb_stor_access_xfer_buf(buffer
, len
, us
->srb
,
876 &index
, &offset
, TO_XFER_BUF
);
888 * Write data to a specific sector address
890 static int alauda_write_data(struct us_data
*us
, unsigned long address
,
891 unsigned int sectors
)
893 unsigned char *buffer
, *blockbuffer
;
894 unsigned int page
, len
, index
, offset
;
895 unsigned int blockshift
= MEDIA_INFO(us
).blockshift
;
896 unsigned int pageshift
= MEDIA_INFO(us
).pageshift
;
897 unsigned int blocksize
= MEDIA_INFO(us
).blocksize
;
898 unsigned int pagesize
= MEDIA_INFO(us
).pagesize
;
903 * Since we don't write the user data directly to the device,
904 * we have to create a bounce buffer and move the data a piece
905 * at a time between the bounce buffer and the actual transfer buffer.
908 len
= min(sectors
, blocksize
) * pagesize
;
909 buffer
= kmalloc(len
, GFP_NOIO
);
910 if (buffer
== NULL
) {
911 printk("alauda_write_data: Out of memory\n");
912 return USB_STOR_TRANSPORT_ERROR
;
916 * We also need a temporary block buffer, where we read in the old data,
917 * overwrite parts with the new data, and manipulate the redundancy data
919 blockbuffer
= kmalloc((pagesize
+ 64) * blocksize
, GFP_NOIO
);
920 if (blockbuffer
== NULL
) {
921 printk("alauda_write_data: Out of memory\n");
923 return USB_STOR_TRANSPORT_ERROR
;
926 /* Figure out the initial LBA and page */
927 lba
= address
>> blockshift
;
928 page
= (address
& MEDIA_INFO(us
).blockmask
);
929 max_lba
= MEDIA_INFO(us
).capacity
>> (pageshift
+ blockshift
);
931 result
= USB_STOR_TRANSPORT_GOOD
;
934 while (sectors
> 0) {
935 /* Write as many sectors as possible in this block */
936 unsigned int pages
= min(sectors
, blocksize
- page
);
937 len
= pages
<< pageshift
;
939 /* Not overflowing capacity? */
940 if (lba
>= max_lba
) {
941 US_DEBUGP("alauda_write_data: Requested lba %u exceeds "
942 "maximum %u\n", lba
, max_lba
);
943 result
= USB_STOR_TRANSPORT_ERROR
;
947 /* Get the data from the transfer buffer */
948 usb_stor_access_xfer_buf(buffer
, len
, us
->srb
,
949 &index
, &offset
, FROM_XFER_BUF
);
951 result
= alauda_write_lba(us
, lba
, page
, pages
, buffer
,
953 if (result
!= USB_STOR_TRANSPORT_GOOD
)
967 * Our interface with the rest of the world
970 static void alauda_info_destructor(void *extra
)
972 struct alauda_info
*info
= (struct alauda_info
*) extra
;
978 for (port
= 0; port
< 2; port
++) {
979 struct alauda_media_info
*media_info
= &info
->port
[port
];
981 alauda_free_maps(media_info
);
982 kfree(media_info
->lba_to_pba
);
983 kfree(media_info
->pba_to_lba
);
988 * Initialize alauda_info struct and find the data-write endpoint
990 int init_alauda(struct us_data
*us
)
992 struct alauda_info
*info
;
993 struct usb_host_interface
*altsetting
= us
->pusb_intf
->cur_altsetting
;
996 us
->extra
= kzalloc(sizeof(struct alauda_info
), GFP_NOIO
);
998 US_DEBUGP("init_alauda: Gah! Can't allocate storage for"
999 "alauda info struct!\n");
1000 return USB_STOR_TRANSPORT_ERROR
;
1002 info
= (struct alauda_info
*) us
->extra
;
1003 us
->extra_destructor
= alauda_info_destructor
;
1005 info
->wr_ep
= usb_sndbulkpipe(us
->pusb_dev
,
1006 altsetting
->endpoint
[0].desc
.bEndpointAddress
1007 & USB_ENDPOINT_NUMBER_MASK
);
1009 return USB_STOR_TRANSPORT_GOOD
;
1012 int alauda_transport(struct scsi_cmnd
*srb
, struct us_data
*us
)
1015 struct alauda_info
*info
= (struct alauda_info
*) us
->extra
;
1016 unsigned char *ptr
= us
->iobuf
;
1017 static unsigned char inquiry_response
[36] = {
1018 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
1021 if (srb
->cmnd
[0] == INQUIRY
) {
1022 US_DEBUGP("alauda_transport: INQUIRY. "
1023 "Returning bogus response.\n");
1024 memcpy(ptr
, inquiry_response
, sizeof(inquiry_response
));
1025 fill_inquiry_response(us
, ptr
, 36);
1026 return USB_STOR_TRANSPORT_GOOD
;
1029 if (srb
->cmnd
[0] == TEST_UNIT_READY
) {
1030 US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n");
1031 return alauda_check_media(us
);
1034 if (srb
->cmnd
[0] == READ_CAPACITY
) {
1035 unsigned int num_zones
;
1036 unsigned long capacity
;
1038 rc
= alauda_check_media(us
);
1039 if (rc
!= USB_STOR_TRANSPORT_GOOD
)
1042 num_zones
= MEDIA_INFO(us
).capacity
>> (MEDIA_INFO(us
).zoneshift
1043 + MEDIA_INFO(us
).blockshift
+ MEDIA_INFO(us
).pageshift
);
1045 capacity
= num_zones
* MEDIA_INFO(us
).uzonesize
1046 * MEDIA_INFO(us
).blocksize
;
1048 /* Report capacity and page size */
1049 ((__be32
*) ptr
)[0] = cpu_to_be32(capacity
- 1);
1050 ((__be32
*) ptr
)[1] = cpu_to_be32(512);
1052 usb_stor_set_xfer_buf(ptr
, 8, srb
);
1053 return USB_STOR_TRANSPORT_GOOD
;
1056 if (srb
->cmnd
[0] == READ_10
) {
1057 unsigned int page
, pages
;
1059 rc
= alauda_check_media(us
);
1060 if (rc
!= USB_STOR_TRANSPORT_GOOD
)
1063 page
= short_pack(srb
->cmnd
[3], srb
->cmnd
[2]);
1065 page
|= short_pack(srb
->cmnd
[5], srb
->cmnd
[4]);
1066 pages
= short_pack(srb
->cmnd
[8], srb
->cmnd
[7]);
1068 US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n",
1071 return alauda_read_data(us
, page
, pages
);
1074 if (srb
->cmnd
[0] == WRITE_10
) {
1075 unsigned int page
, pages
;
1077 rc
= alauda_check_media(us
);
1078 if (rc
!= USB_STOR_TRANSPORT_GOOD
)
1081 page
= short_pack(srb
->cmnd
[3], srb
->cmnd
[2]);
1083 page
|= short_pack(srb
->cmnd
[5], srb
->cmnd
[4]);
1084 pages
= short_pack(srb
->cmnd
[8], srb
->cmnd
[7]);
1086 US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n",
1089 return alauda_write_data(us
, page
, pages
);
1092 if (srb
->cmnd
[0] == REQUEST_SENSE
) {
1093 US_DEBUGP("alauda_transport: REQUEST_SENSE.\n");
1097 ptr
[2] = info
->sense_key
;
1099 ptr
[12] = info
->sense_asc
;
1100 ptr
[13] = info
->sense_ascq
;
1101 usb_stor_set_xfer_buf(ptr
, 18, srb
);
1103 return USB_STOR_TRANSPORT_GOOD
;
1106 if (srb
->cmnd
[0] == ALLOW_MEDIUM_REMOVAL
) {
1107 /* sure. whatever. not like we can stop the user from popping
1108 the media out of the device (no locking doors, etc) */
1109 return USB_STOR_TRANSPORT_GOOD
;
1112 US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n",
1113 srb
->cmnd
[0], srb
->cmnd
[0]);
1114 info
->sense_key
= 0x05;
1115 info
->sense_asc
= 0x20;
1116 info
->sense_ascq
= 0x00;
1117 return USB_STOR_TRANSPORT_FAILED
;