drivers/usb/storage/usb.h

   1 /* Driver for USB Mass Storage compliant devices
   2  * Main Header File
   3  *
   4  * $Id: usb.h,v 1.21 2002/04/21 02:57:59 mdharm Exp $
   5  *
   6  * Current development and maintenance by:
   7  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   8  *
   9  * Initial work by:
  10  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
  11  *
  12  * This driver is based on the 'USB Mass Storage Class' document. This
  13  * describes in detail the protocol used to communicate with such
  14  * devices.  Clearly, the designers had SCSI and ATAPI commands in
  15  * mind when they created this document.  The commands are all very
  16  * similar to commands in the SCSI-II and ATAPI specifications.
  17  *
  18  * It is important to note that in a number of cases this class
  19  * exhibits class-specific exemptions from the USB specification.
  20  * Notably the usage of NAK, STALL and ACK differs from the norm, in
  21  * that they are used to communicate wait, failed and OK on commands.
  22  *
  23  * Also, for certain devices, the interrupt endpoint is used to convey
  24  * status of a command.
  25  *
  26  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  27  * information about this driver.
  28  *
  29  * This program is free software; you can redistribute it and/or modify it
  30  * under the terms of the GNU General Public License as published by the
  31  * Free Software Foundation; either version 2, or (at your option) any
  32  * later version.
  33  *
  34  * This program is distributed in the hope that it will be useful, but
  35  * WITHOUT ANY WARRANTY; without even the implied warranty of
  36  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  37  * General Public License for more details.
  38  *
  39  * You should have received a copy of the GNU General Public License along
  40  * with this program; if not, write to the Free Software Foundation, Inc.,
  41  * 675 Mass Ave, Cambridge, MA 02139, USA.
  42  */
  43
  44 #ifndef _USB_H_
  45 #define _USB_H_
  46
  47 #include <linux/usb.h>
  48 #include <linux/usb_usual.h>
  49 #include <linux/blkdev.h>
  50 #include <linux/smp_lock.h>
  51 #include <linux/completion.h>
  52 #include <linux/mutex.h>
  53 #include <scsi/scsi_host.h>
  54
  55 struct us_data;
  56 struct scsi_cmnd;
  57
  58 /*
  59  * Unusual device list definitions
  60  */
  61
  62 struct us_unusual_dev {
  63         const char* vendorName;
  64         const char* productName;
  65         __u8  useProtocol;
  66         __u8  useTransport;
  67         int (*initFunction)(struct us_data *);
  68 };
  69
  70
  71 /* Dynamic flag definitions: used in set_bit() etc. */
  72 #define US_FLIDX_URB_ACTIVE     18  /* 0x00040000  current_urb is in use  */
  73 #define US_FLIDX_SG_ACTIVE      19  /* 0x00080000  current_sg is in use   */
  74 #define US_FLIDX_ABORTING       20  /* 0x00100000  abort is in progress   */
  75 #define US_FLIDX_DISCONNECTING  21  /* 0x00200000  disconnect in progress */
  76 #define ABORTING_OR_DISCONNECTING       ((1UL << US_FLIDX_ABORTING) | \
  77                                          (1UL << US_FLIDX_DISCONNECTING))
  78 #define US_FLIDX_RESETTING      22  /* 0x00400000  device reset in progress */
  79 #define US_FLIDX_TIMED_OUT      23  /* 0x00800000  SCSI midlayer timed out  */
  80
  81
  82 #define USB_STOR_STRING_LEN 32
  83
  84 /*
  85  * We provide a DMA-mapped I/O buffer for use with small USB transfers.
  86  * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
  87  * 31-byte buffer.  But Freecom needs a 64-byte buffer, so that's the
  88  * size we'll allocate.
  89  */
  90
  91 #define US_IOBUF_SIZE           64      /* Size of the DMA-mapped I/O buffer */
  92 #define US_SENSE_SIZE           18      /* Size of the autosense data buffer */
  93
  94 typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
  95 typedef int (*trans_reset)(struct us_data*);
  96 typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*);
  97 typedef void (*extra_data_destructor)(void *);  /* extra data destructor */
  98 typedef void (*pm_hook)(struct us_data *, int); /* power management hook */
  99
 100 #define US_SUSPEND      0
 101 #define US_RESUME       1
 102
 103 /* we allocate one of these for every device that we remember */
 104 struct us_data {
 105         /* The device we're working with
 106          * It's important to note:
 107          *    (o) you must hold dev_mutex to change pusb_dev
 108          */
 109         struct mutex            dev_mutex;       /* protect pusb_dev */
 110         struct usb_device       *pusb_dev;       /* this usb_device */
 111         struct usb_interface    *pusb_intf;      /* this interface */
 112         struct us_unusual_dev   *unusual_dev;    /* device-filter entry     */
 113         unsigned long           flags;           /* from filter initially */
 114         unsigned int            send_bulk_pipe;  /* cached pipe values */
 115         unsigned int            recv_bulk_pipe;
 116         unsigned int            send_ctrl_pipe;
 117         unsigned int            recv_ctrl_pipe;
 118         unsigned int            recv_intr_pipe;
 119
 120         /* information about the device */
 121         char                    *transport_name;
 122         char                    *protocol_name;
 123         __le32                  bcs_signature;
 124         u8                      subclass;
 125         u8                      protocol;
 126         u8                      max_lun;
 127
 128         u8                      ifnum;           /* interface number   */
 129         u8                      ep_bInterval;    /* interrupt interval */
 130
 131         /* function pointers for this device */
 132         trans_cmnd              transport;       /* transport function     */
 133         trans_reset             transport_reset; /* transport device reset */
 134         proto_cmnd              proto_handler;   /* protocol handler       */
 135
 136         /* SCSI interfaces */
 137         struct scsi_cmnd        *srb;            /* current srb         */
 138         unsigned int            tag;             /* current dCBWTag     */
 139
 140         /* control and bulk communications data */
 141         struct urb              *current_urb;    /* USB requests         */
 142         struct usb_ctrlrequest  *cr;             /* control requests     */
 143         struct usb_sg_request   current_sg;      /* scatter-gather req.  */
 144         unsigned char           *iobuf;          /* I/O buffer           */
 145         unsigned char           *sensebuf;       /* sense data buffer    */
 146         dma_addr_t              cr_dma;          /* buffer DMA addresses */
 147         dma_addr_t              iobuf_dma;
 148
 149         /* mutual exclusion and synchronization structures */
 150         struct semaphore        sema;            /* to sleep thread on      */
 151         struct completion       notify;          /* thread begin/end        */
 152         wait_queue_head_t       delay_wait;      /* wait during scan, reset */
 153
 154         /* subdriver information */
 155         void                    *extra;          /* Any extra data          */
 156         extra_data_destructor   extra_destructor;/* extra data destructor   */
 157 #ifdef CONFIG_PM
 158         pm_hook                 suspend_resume_hook;
 159 #endif
 160 };
 161
 162 /* Convert between us_data and the corresponding Scsi_Host */
 163 static struct Scsi_Host inline *us_to_host(struct us_data *us) {
 164         return container_of((void *) us, struct Scsi_Host, hostdata);
 165 }
 166 static struct us_data inline *host_to_us(struct Scsi_Host *host) {
 167         return (struct us_data *) host->hostdata;
 168 }
 169
 170 /* Function to fill an inquiry response. See usb.c for details */
 171 extern void fill_inquiry_response(struct us_data *us,
 172         unsigned char *data, unsigned int data_len);
 173
 174 /* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
 175  * single queue element srb for write access */
 176 #define scsi_unlock(host)       spin_unlock_irq(host->host_lock)
 177 #define scsi_lock(host)         spin_lock_irq(host->host_lock)
 178
 179
 180 /* Vendor ID list for devices that require special handling */
 181 #define USB_VENDOR_ID_GENESYS           0x05e3  /* Genesys Logic */
 182
 183 #endif