Linux 2.6.17.7
[linux/fpc-iii.git] / net / ipv4 / arp.c
blob4749d504c6292188f921b8b296c0394834f2851f
1 /* linux/net/inet/arp.c
3 * Version: $Id: arp.c,v 1.99 2001/08/30 22:55:42 davem Exp $
5 * Copyright (C) 1994 by Florian La Roche
7 * This module implements the Address Resolution Protocol ARP (RFC 826),
8 * which is used to convert IP addresses (or in the future maybe other
9 * high-level addresses) into a low-level hardware address (like an Ethernet
10 * address).
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
17 * Fixes:
18 * Alan Cox : Removed the Ethernet assumptions in
19 * Florian's code
20 * Alan Cox : Fixed some small errors in the ARP
21 * logic
22 * Alan Cox : Allow >4K in /proc
23 * Alan Cox : Make ARP add its own protocol entry
24 * Ross Martin : Rewrote arp_rcv() and arp_get_info()
25 * Stephen Henson : Add AX25 support to arp_get_info()
26 * Alan Cox : Drop data when a device is downed.
27 * Alan Cox : Use init_timer().
28 * Alan Cox : Double lock fixes.
29 * Martin Seine : Move the arphdr structure
30 * to if_arp.h for compatibility.
31 * with BSD based programs.
32 * Andrew Tridgell : Added ARP netmask code and
33 * re-arranged proxy handling.
34 * Alan Cox : Changed to use notifiers.
35 * Niibe Yutaka : Reply for this device or proxies only.
36 * Alan Cox : Don't proxy across hardware types!
37 * Jonathan Naylor : Added support for NET/ROM.
38 * Mike Shaver : RFC1122 checks.
39 * Jonathan Naylor : Only lookup the hardware address for
40 * the correct hardware type.
41 * Germano Caronni : Assorted subtle races.
42 * Craig Schlenter : Don't modify permanent entry
43 * during arp_rcv.
44 * Russ Nelson : Tidied up a few bits.
45 * Alexey Kuznetsov: Major changes to caching and behaviour,
46 * eg intelligent arp probing and
47 * generation
48 * of host down events.
49 * Alan Cox : Missing unlock in device events.
50 * Eckes : ARP ioctl control errors.
51 * Alexey Kuznetsov: Arp free fix.
52 * Manuel Rodriguez: Gratuitous ARP.
53 * Jonathan Layes : Added arpd support through kerneld
54 * message queue (960314)
55 * Mike Shaver : /proc/sys/net/ipv4/arp_* support
56 * Mike McLagan : Routing by source
57 * Stuart Cheshire : Metricom and grat arp fixes
58 * *** FOR 2.1 clean this up ***
59 * Lawrence V. Stefani: (08/12/96) Added FDDI support.
60 * Alan Cox : Took the AP1000 nasty FDDI hack and
61 * folded into the mainstream FDDI code.
62 * Ack spit, Linus how did you allow that
63 * one in...
64 * Jes Sorensen : Make FDDI work again in 2.1.x and
65 * clean up the APFDDI & gen. FDDI bits.
66 * Alexey Kuznetsov: new arp state machine;
67 * now it is in net/core/neighbour.c.
68 * Krzysztof Halasa: Added Frame Relay ARP support.
69 * Arnaldo C. Melo : convert /proc/net/arp to seq_file
70 * Shmulik Hen: Split arp_send to arp_create and
71 * arp_xmit so intermediate drivers like
72 * bonding can change the skb before
73 * sending (e.g. insert 8021q tag).
74 * Harald Welte : convert to make use of jenkins hash
77 #include <linux/module.h>
78 #include <linux/types.h>
79 #include <linux/string.h>
80 #include <linux/kernel.h>
81 #include <linux/sched.h>
82 #include <linux/capability.h>
83 #include <linux/config.h>
84 #include <linux/socket.h>
85 #include <linux/sockios.h>
86 #include <linux/errno.h>
87 #include <linux/in.h>
88 #include <linux/mm.h>
89 #include <linux/inet.h>
90 #include <linux/inetdevice.h>
91 #include <linux/netdevice.h>
92 #include <linux/etherdevice.h>
93 #include <linux/fddidevice.h>
94 #include <linux/if_arp.h>
95 #include <linux/trdevice.h>
96 #include <linux/skbuff.h>
97 #include <linux/proc_fs.h>
98 #include <linux/seq_file.h>
99 #include <linux/stat.h>
100 #include <linux/init.h>
101 #include <linux/net.h>
102 #include <linux/rcupdate.h>
103 #include <linux/jhash.h>
104 #ifdef CONFIG_SYSCTL
105 #include <linux/sysctl.h>
106 #endif
108 #include <net/ip.h>
109 #include <net/icmp.h>
110 #include <net/route.h>
111 #include <net/protocol.h>
112 #include <net/tcp.h>
113 #include <net/sock.h>
114 #include <net/arp.h>
115 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
116 #include <net/ax25.h>
117 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
118 #include <net/netrom.h>
119 #endif
120 #endif
121 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
122 #include <net/atmclip.h>
123 struct neigh_table *clip_tbl_hook;
124 #endif
126 #include <asm/system.h>
127 #include <asm/uaccess.h>
129 #include <linux/netfilter_arp.h>
132 * Interface to generic neighbour cache.
134 static u32 arp_hash(const void *pkey, const struct net_device *dev);
135 static int arp_constructor(struct neighbour *neigh);
136 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
137 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
138 static void parp_redo(struct sk_buff *skb);
140 static struct neigh_ops arp_generic_ops = {
141 .family = AF_INET,
142 .solicit = arp_solicit,
143 .error_report = arp_error_report,
144 .output = neigh_resolve_output,
145 .connected_output = neigh_connected_output,
146 .hh_output = dev_queue_xmit,
147 .queue_xmit = dev_queue_xmit,
150 static struct neigh_ops arp_hh_ops = {
151 .family = AF_INET,
152 .solicit = arp_solicit,
153 .error_report = arp_error_report,
154 .output = neigh_resolve_output,
155 .connected_output = neigh_resolve_output,
156 .hh_output = dev_queue_xmit,
157 .queue_xmit = dev_queue_xmit,
160 static struct neigh_ops arp_direct_ops = {
161 .family = AF_INET,
162 .output = dev_queue_xmit,
163 .connected_output = dev_queue_xmit,
164 .hh_output = dev_queue_xmit,
165 .queue_xmit = dev_queue_xmit,
168 struct neigh_ops arp_broken_ops = {
169 .family = AF_INET,
170 .solicit = arp_solicit,
171 .error_report = arp_error_report,
172 .output = neigh_compat_output,
173 .connected_output = neigh_compat_output,
174 .hh_output = dev_queue_xmit,
175 .queue_xmit = dev_queue_xmit,
178 struct neigh_table arp_tbl = {
179 .family = AF_INET,
180 .entry_size = sizeof(struct neighbour) + 4,
181 .key_len = 4,
182 .hash = arp_hash,
183 .constructor = arp_constructor,
184 .proxy_redo = parp_redo,
185 .id = "arp_cache",
186 .parms = {
187 .tbl = &arp_tbl,
188 .base_reachable_time = 30 * HZ,
189 .retrans_time = 1 * HZ,
190 .gc_staletime = 60 * HZ,
191 .reachable_time = 30 * HZ,
192 .delay_probe_time = 5 * HZ,
193 .queue_len = 3,
194 .ucast_probes = 3,
195 .mcast_probes = 3,
196 .anycast_delay = 1 * HZ,
197 .proxy_delay = (8 * HZ) / 10,
198 .proxy_qlen = 64,
199 .locktime = 1 * HZ,
201 .gc_interval = 30 * HZ,
202 .gc_thresh1 = 128,
203 .gc_thresh2 = 512,
204 .gc_thresh3 = 1024,
207 int arp_mc_map(u32 addr, u8 *haddr, struct net_device *dev, int dir)
209 switch (dev->type) {
210 case ARPHRD_ETHER:
211 case ARPHRD_FDDI:
212 case ARPHRD_IEEE802:
213 ip_eth_mc_map(addr, haddr);
214 return 0;
215 case ARPHRD_IEEE802_TR:
216 ip_tr_mc_map(addr, haddr);
217 return 0;
218 case ARPHRD_INFINIBAND:
219 ip_ib_mc_map(addr, haddr);
220 return 0;
221 default:
222 if (dir) {
223 memcpy(haddr, dev->broadcast, dev->addr_len);
224 return 0;
227 return -EINVAL;
231 static u32 arp_hash(const void *pkey, const struct net_device *dev)
233 return jhash_2words(*(u32 *)pkey, dev->ifindex, arp_tbl.hash_rnd);
236 static int arp_constructor(struct neighbour *neigh)
238 u32 addr = *(u32*)neigh->primary_key;
239 struct net_device *dev = neigh->dev;
240 struct in_device *in_dev;
241 struct neigh_parms *parms;
243 neigh->type = inet_addr_type(addr);
245 rcu_read_lock();
246 in_dev = __in_dev_get_rcu(dev);
247 if (in_dev == NULL) {
248 rcu_read_unlock();
249 return -EINVAL;
252 parms = in_dev->arp_parms;
253 __neigh_parms_put(neigh->parms);
254 neigh->parms = neigh_parms_clone(parms);
255 rcu_read_unlock();
257 if (dev->hard_header == NULL) {
258 neigh->nud_state = NUD_NOARP;
259 neigh->ops = &arp_direct_ops;
260 neigh->output = neigh->ops->queue_xmit;
261 } else {
262 /* Good devices (checked by reading texts, but only Ethernet is
263 tested)
265 ARPHRD_ETHER: (ethernet, apfddi)
266 ARPHRD_FDDI: (fddi)
267 ARPHRD_IEEE802: (tr)
268 ARPHRD_METRICOM: (strip)
269 ARPHRD_ARCNET:
270 etc. etc. etc.
272 ARPHRD_IPDDP will also work, if author repairs it.
273 I did not it, because this driver does not work even
274 in old paradigm.
277 #if 1
278 /* So... these "amateur" devices are hopeless.
279 The only thing, that I can say now:
280 It is very sad that we need to keep ugly obsolete
281 code to make them happy.
283 They should be moved to more reasonable state, now
284 they use rebuild_header INSTEAD OF hard_start_xmit!!!
285 Besides that, they are sort of out of date
286 (a lot of redundant clones/copies, useless in 2.1),
287 I wonder why people believe that they work.
289 switch (dev->type) {
290 default:
291 break;
292 case ARPHRD_ROSE:
293 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
294 case ARPHRD_AX25:
295 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
296 case ARPHRD_NETROM:
297 #endif
298 neigh->ops = &arp_broken_ops;
299 neigh->output = neigh->ops->output;
300 return 0;
301 #endif
303 #endif
304 if (neigh->type == RTN_MULTICAST) {
305 neigh->nud_state = NUD_NOARP;
306 arp_mc_map(addr, neigh->ha, dev, 1);
307 } else if (dev->flags&(IFF_NOARP|IFF_LOOPBACK)) {
308 neigh->nud_state = NUD_NOARP;
309 memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
310 } else if (neigh->type == RTN_BROADCAST || dev->flags&IFF_POINTOPOINT) {
311 neigh->nud_state = NUD_NOARP;
312 memcpy(neigh->ha, dev->broadcast, dev->addr_len);
314 if (dev->hard_header_cache)
315 neigh->ops = &arp_hh_ops;
316 else
317 neigh->ops = &arp_generic_ops;
318 if (neigh->nud_state&NUD_VALID)
319 neigh->output = neigh->ops->connected_output;
320 else
321 neigh->output = neigh->ops->output;
323 return 0;
326 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
328 dst_link_failure(skb);
329 kfree_skb(skb);
332 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
334 u32 saddr = 0;
335 u8 *dst_ha = NULL;
336 struct net_device *dev = neigh->dev;
337 u32 target = *(u32*)neigh->primary_key;
338 int probes = atomic_read(&neigh->probes);
339 struct in_device *in_dev = in_dev_get(dev);
341 if (!in_dev)
342 return;
344 switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
345 default:
346 case 0: /* By default announce any local IP */
347 if (skb && inet_addr_type(skb->nh.iph->saddr) == RTN_LOCAL)
348 saddr = skb->nh.iph->saddr;
349 break;
350 case 1: /* Restrict announcements of saddr in same subnet */
351 if (!skb)
352 break;
353 saddr = skb->nh.iph->saddr;
354 if (inet_addr_type(saddr) == RTN_LOCAL) {
355 /* saddr should be known to target */
356 if (inet_addr_onlink(in_dev, target, saddr))
357 break;
359 saddr = 0;
360 break;
361 case 2: /* Avoid secondary IPs, get a primary/preferred one */
362 break;
365 if (in_dev)
366 in_dev_put(in_dev);
367 if (!saddr)
368 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
370 if ((probes -= neigh->parms->ucast_probes) < 0) {
371 if (!(neigh->nud_state&NUD_VALID))
372 printk(KERN_DEBUG "trying to ucast probe in NUD_INVALID\n");
373 dst_ha = neigh->ha;
374 read_lock_bh(&neigh->lock);
375 } else if ((probes -= neigh->parms->app_probes) < 0) {
376 #ifdef CONFIG_ARPD
377 neigh_app_ns(neigh);
378 #endif
379 return;
382 arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
383 dst_ha, dev->dev_addr, NULL);
384 if (dst_ha)
385 read_unlock_bh(&neigh->lock);
388 static int arp_ignore(struct in_device *in_dev, struct net_device *dev,
389 u32 sip, u32 tip)
391 int scope;
393 switch (IN_DEV_ARP_IGNORE(in_dev)) {
394 case 0: /* Reply, the tip is already validated */
395 return 0;
396 case 1: /* Reply only if tip is configured on the incoming interface */
397 sip = 0;
398 scope = RT_SCOPE_HOST;
399 break;
400 case 2: /*
401 * Reply only if tip is configured on the incoming interface
402 * and is in same subnet as sip
404 scope = RT_SCOPE_HOST;
405 break;
406 case 3: /* Do not reply for scope host addresses */
407 sip = 0;
408 scope = RT_SCOPE_LINK;
409 dev = NULL;
410 break;
411 case 4: /* Reserved */
412 case 5:
413 case 6:
414 case 7:
415 return 0;
416 case 8: /* Do not reply */
417 return 1;
418 default:
419 return 0;
421 return !inet_confirm_addr(dev, sip, tip, scope);
424 static int arp_filter(__u32 sip, __u32 tip, struct net_device *dev)
426 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = sip,
427 .saddr = tip } } };
428 struct rtable *rt;
429 int flag = 0;
430 /*unsigned long now; */
432 if (ip_route_output_key(&rt, &fl) < 0)
433 return 1;
434 if (rt->u.dst.dev != dev) {
435 NET_INC_STATS_BH(LINUX_MIB_ARPFILTER);
436 flag = 1;
438 ip_rt_put(rt);
439 return flag;
442 /* OBSOLETE FUNCTIONS */
445 * Find an arp mapping in the cache. If not found, post a request.
447 * It is very UGLY routine: it DOES NOT use skb->dst->neighbour,
448 * even if it exists. It is supposed that skb->dev was mangled
449 * by a virtual device (eql, shaper). Nobody but broken devices
450 * is allowed to use this function, it is scheduled to be removed. --ANK
453 static int arp_set_predefined(int addr_hint, unsigned char * haddr, u32 paddr, struct net_device * dev)
455 switch (addr_hint) {
456 case RTN_LOCAL:
457 printk(KERN_DEBUG "ARP: arp called for own IP address\n");
458 memcpy(haddr, dev->dev_addr, dev->addr_len);
459 return 1;
460 case RTN_MULTICAST:
461 arp_mc_map(paddr, haddr, dev, 1);
462 return 1;
463 case RTN_BROADCAST:
464 memcpy(haddr, dev->broadcast, dev->addr_len);
465 return 1;
467 return 0;
471 int arp_find(unsigned char *haddr, struct sk_buff *skb)
473 struct net_device *dev = skb->dev;
474 u32 paddr;
475 struct neighbour *n;
477 if (!skb->dst) {
478 printk(KERN_DEBUG "arp_find is called with dst==NULL\n");
479 kfree_skb(skb);
480 return 1;
483 paddr = ((struct rtable*)skb->dst)->rt_gateway;
485 if (arp_set_predefined(inet_addr_type(paddr), haddr, paddr, dev))
486 return 0;
488 n = __neigh_lookup(&arp_tbl, &paddr, dev, 1);
490 if (n) {
491 n->used = jiffies;
492 if (n->nud_state&NUD_VALID || neigh_event_send(n, skb) == 0) {
493 read_lock_bh(&n->lock);
494 memcpy(haddr, n->ha, dev->addr_len);
495 read_unlock_bh(&n->lock);
496 neigh_release(n);
497 return 0;
499 neigh_release(n);
500 } else
501 kfree_skb(skb);
502 return 1;
505 /* END OF OBSOLETE FUNCTIONS */
507 int arp_bind_neighbour(struct dst_entry *dst)
509 struct net_device *dev = dst->dev;
510 struct neighbour *n = dst->neighbour;
512 if (dev == NULL)
513 return -EINVAL;
514 if (n == NULL) {
515 u32 nexthop = ((struct rtable*)dst)->rt_gateway;
516 if (dev->flags&(IFF_LOOPBACK|IFF_POINTOPOINT))
517 nexthop = 0;
518 n = __neigh_lookup_errno(
519 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
520 dev->type == ARPHRD_ATM ? clip_tbl_hook :
521 #endif
522 &arp_tbl, &nexthop, dev);
523 if (IS_ERR(n))
524 return PTR_ERR(n);
525 dst->neighbour = n;
527 return 0;
531 * Check if we can use proxy ARP for this path
534 static inline int arp_fwd_proxy(struct in_device *in_dev, struct rtable *rt)
536 struct in_device *out_dev;
537 int imi, omi = -1;
539 if (!IN_DEV_PROXY_ARP(in_dev))
540 return 0;
542 if ((imi = IN_DEV_MEDIUM_ID(in_dev)) == 0)
543 return 1;
544 if (imi == -1)
545 return 0;
547 /* place to check for proxy_arp for routes */
549 if ((out_dev = in_dev_get(rt->u.dst.dev)) != NULL) {
550 omi = IN_DEV_MEDIUM_ID(out_dev);
551 in_dev_put(out_dev);
553 return (omi != imi && omi != -1);
557 * Interface to link layer: send routine and receive handler.
561 * Create an arp packet. If (dest_hw == NULL), we create a broadcast
562 * message.
564 struct sk_buff *arp_create(int type, int ptype, u32 dest_ip,
565 struct net_device *dev, u32 src_ip,
566 unsigned char *dest_hw, unsigned char *src_hw,
567 unsigned char *target_hw)
569 struct sk_buff *skb;
570 struct arphdr *arp;
571 unsigned char *arp_ptr;
574 * Allocate a buffer
577 skb = alloc_skb(sizeof(struct arphdr)+ 2*(dev->addr_len+4)
578 + LL_RESERVED_SPACE(dev), GFP_ATOMIC);
579 if (skb == NULL)
580 return NULL;
582 skb_reserve(skb, LL_RESERVED_SPACE(dev));
583 skb->nh.raw = skb->data;
584 arp = (struct arphdr *) skb_put(skb,sizeof(struct arphdr) + 2*(dev->addr_len+4));
585 skb->dev = dev;
586 skb->protocol = htons(ETH_P_ARP);
587 if (src_hw == NULL)
588 src_hw = dev->dev_addr;
589 if (dest_hw == NULL)
590 dest_hw = dev->broadcast;
593 * Fill the device header for the ARP frame
595 if (dev->hard_header &&
596 dev->hard_header(skb,dev,ptype,dest_hw,src_hw,skb->len) < 0)
597 goto out;
600 * Fill out the arp protocol part.
602 * The arp hardware type should match the device type, except for FDDI,
603 * which (according to RFC 1390) should always equal 1 (Ethernet).
606 * Exceptions everywhere. AX.25 uses the AX.25 PID value not the
607 * DIX code for the protocol. Make these device structure fields.
609 switch (dev->type) {
610 default:
611 arp->ar_hrd = htons(dev->type);
612 arp->ar_pro = htons(ETH_P_IP);
613 break;
615 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
616 case ARPHRD_AX25:
617 arp->ar_hrd = htons(ARPHRD_AX25);
618 arp->ar_pro = htons(AX25_P_IP);
619 break;
621 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
622 case ARPHRD_NETROM:
623 arp->ar_hrd = htons(ARPHRD_NETROM);
624 arp->ar_pro = htons(AX25_P_IP);
625 break;
626 #endif
627 #endif
629 #ifdef CONFIG_FDDI
630 case ARPHRD_FDDI:
631 arp->ar_hrd = htons(ARPHRD_ETHER);
632 arp->ar_pro = htons(ETH_P_IP);
633 break;
634 #endif
635 #ifdef CONFIG_TR
636 case ARPHRD_IEEE802_TR:
637 arp->ar_hrd = htons(ARPHRD_IEEE802);
638 arp->ar_pro = htons(ETH_P_IP);
639 break;
640 #endif
643 arp->ar_hln = dev->addr_len;
644 arp->ar_pln = 4;
645 arp->ar_op = htons(type);
647 arp_ptr=(unsigned char *)(arp+1);
649 memcpy(arp_ptr, src_hw, dev->addr_len);
650 arp_ptr+=dev->addr_len;
651 memcpy(arp_ptr, &src_ip,4);
652 arp_ptr+=4;
653 if (target_hw != NULL)
654 memcpy(arp_ptr, target_hw, dev->addr_len);
655 else
656 memset(arp_ptr, 0, dev->addr_len);
657 arp_ptr+=dev->addr_len;
658 memcpy(arp_ptr, &dest_ip, 4);
660 return skb;
662 out:
663 kfree_skb(skb);
664 return NULL;
668 * Send an arp packet.
670 void arp_xmit(struct sk_buff *skb)
672 /* Send it off, maybe filter it using firewalling first. */
673 NF_HOOK(NF_ARP, NF_ARP_OUT, skb, NULL, skb->dev, dev_queue_xmit);
677 * Create and send an arp packet.
679 void arp_send(int type, int ptype, u32 dest_ip,
680 struct net_device *dev, u32 src_ip,
681 unsigned char *dest_hw, unsigned char *src_hw,
682 unsigned char *target_hw)
684 struct sk_buff *skb;
687 * No arp on this interface.
690 if (dev->flags&IFF_NOARP)
691 return;
693 skb = arp_create(type, ptype, dest_ip, dev, src_ip,
694 dest_hw, src_hw, target_hw);
695 if (skb == NULL) {
696 return;
699 arp_xmit(skb);
703 * Process an arp request.
706 static int arp_process(struct sk_buff *skb)
708 struct net_device *dev = skb->dev;
709 struct in_device *in_dev = in_dev_get(dev);
710 struct arphdr *arp;
711 unsigned char *arp_ptr;
712 struct rtable *rt;
713 unsigned char *sha, *tha;
714 u32 sip, tip;
715 u16 dev_type = dev->type;
716 int addr_type;
717 struct neighbour *n;
719 /* arp_rcv below verifies the ARP header and verifies the device
720 * is ARP'able.
723 if (in_dev == NULL)
724 goto out;
726 arp = skb->nh.arph;
728 switch (dev_type) {
729 default:
730 if (arp->ar_pro != htons(ETH_P_IP) ||
731 htons(dev_type) != arp->ar_hrd)
732 goto out;
733 break;
734 #ifdef CONFIG_NET_ETHERNET
735 case ARPHRD_ETHER:
736 #endif
737 #ifdef CONFIG_TR
738 case ARPHRD_IEEE802_TR:
739 #endif
740 #ifdef CONFIG_FDDI
741 case ARPHRD_FDDI:
742 #endif
743 #ifdef CONFIG_NET_FC
744 case ARPHRD_IEEE802:
745 #endif
746 #if defined(CONFIG_NET_ETHERNET) || defined(CONFIG_TR) || \
747 defined(CONFIG_FDDI) || defined(CONFIG_NET_FC)
749 * ETHERNET, Token Ring and Fibre Channel (which are IEEE 802
750 * devices, according to RFC 2625) devices will accept ARP
751 * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
752 * This is the case also of FDDI, where the RFC 1390 says that
753 * FDDI devices should accept ARP hardware of (1) Ethernet,
754 * however, to be more robust, we'll accept both 1 (Ethernet)
755 * or 6 (IEEE 802.2)
757 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
758 arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
759 arp->ar_pro != htons(ETH_P_IP))
760 goto out;
761 break;
762 #endif
763 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
764 case ARPHRD_AX25:
765 if (arp->ar_pro != htons(AX25_P_IP) ||
766 arp->ar_hrd != htons(ARPHRD_AX25))
767 goto out;
768 break;
769 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
770 case ARPHRD_NETROM:
771 if (arp->ar_pro != htons(AX25_P_IP) ||
772 arp->ar_hrd != htons(ARPHRD_NETROM))
773 goto out;
774 break;
775 #endif
776 #endif
779 /* Understand only these message types */
781 if (arp->ar_op != htons(ARPOP_REPLY) &&
782 arp->ar_op != htons(ARPOP_REQUEST))
783 goto out;
786 * Extract fields
788 arp_ptr= (unsigned char *)(arp+1);
789 sha = arp_ptr;
790 arp_ptr += dev->addr_len;
791 memcpy(&sip, arp_ptr, 4);
792 arp_ptr += 4;
793 tha = arp_ptr;
794 arp_ptr += dev->addr_len;
795 memcpy(&tip, arp_ptr, 4);
797 * Check for bad requests for 127.x.x.x and requests for multicast
798 * addresses. If this is one such, delete it.
800 if (LOOPBACK(tip) || MULTICAST(tip))
801 goto out;
804 * Special case: We must set Frame Relay source Q.922 address
806 if (dev_type == ARPHRD_DLCI)
807 sha = dev->broadcast;
810 * Process entry. The idea here is we want to send a reply if it is a
811 * request for us or if it is a request for someone else that we hold
812 * a proxy for. We want to add an entry to our cache if it is a reply
813 * to us or if it is a request for our address.
814 * (The assumption for this last is that if someone is requesting our
815 * address, they are probably intending to talk to us, so it saves time
816 * if we cache their address. Their address is also probably not in
817 * our cache, since ours is not in their cache.)
819 * Putting this another way, we only care about replies if they are to
820 * us, in which case we add them to the cache. For requests, we care
821 * about those for us and those for our proxies. We reply to both,
822 * and in the case of requests for us we add the requester to the arp
823 * cache.
826 /* Special case: IPv4 duplicate address detection packet (RFC2131) */
827 if (sip == 0) {
828 if (arp->ar_op == htons(ARPOP_REQUEST) &&
829 inet_addr_type(tip) == RTN_LOCAL &&
830 !arp_ignore(in_dev,dev,sip,tip))
831 arp_send(ARPOP_REPLY,ETH_P_ARP,tip,dev,tip,sha,dev->dev_addr,dev->dev_addr);
832 goto out;
835 if (arp->ar_op == htons(ARPOP_REQUEST) &&
836 ip_route_input(skb, tip, sip, 0, dev) == 0) {
838 rt = (struct rtable*)skb->dst;
839 addr_type = rt->rt_type;
841 if (addr_type == RTN_LOCAL) {
842 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
843 if (n) {
844 int dont_send = 0;
846 if (!dont_send)
847 dont_send |= arp_ignore(in_dev,dev,sip,tip);
848 if (!dont_send && IN_DEV_ARPFILTER(in_dev))
849 dont_send |= arp_filter(sip,tip,dev);
850 if (!dont_send)
851 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
853 neigh_release(n);
855 goto out;
856 } else if (IN_DEV_FORWARD(in_dev)) {
857 if ((rt->rt_flags&RTCF_DNAT) ||
858 (addr_type == RTN_UNICAST && rt->u.dst.dev != dev &&
859 (arp_fwd_proxy(in_dev, rt) || pneigh_lookup(&arp_tbl, &tip, dev, 0)))) {
860 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
861 if (n)
862 neigh_release(n);
864 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
865 skb->pkt_type == PACKET_HOST ||
866 in_dev->arp_parms->proxy_delay == 0) {
867 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
868 } else {
869 pneigh_enqueue(&arp_tbl, in_dev->arp_parms, skb);
870 in_dev_put(in_dev);
871 return 0;
873 goto out;
878 /* Update our ARP tables */
880 n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
882 if (ipv4_devconf.arp_accept) {
883 /* Unsolicited ARP is not accepted by default.
884 It is possible, that this option should be enabled for some
885 devices (strip is candidate)
887 if (n == NULL &&
888 arp->ar_op == htons(ARPOP_REPLY) &&
889 inet_addr_type(sip) == RTN_UNICAST)
890 n = __neigh_lookup(&arp_tbl, &sip, dev, -1);
893 if (n) {
894 int state = NUD_REACHABLE;
895 int override;
897 /* If several different ARP replies follows back-to-back,
898 use the FIRST one. It is possible, if several proxy
899 agents are active. Taking the first reply prevents
900 arp trashing and chooses the fastest router.
902 override = time_after(jiffies, n->updated + n->parms->locktime);
904 /* Broadcast replies and request packets
905 do not assert neighbour reachability.
907 if (arp->ar_op != htons(ARPOP_REPLY) ||
908 skb->pkt_type != PACKET_HOST)
909 state = NUD_STALE;
910 neigh_update(n, sha, state, override ? NEIGH_UPDATE_F_OVERRIDE : 0);
911 neigh_release(n);
914 out:
915 if (in_dev)
916 in_dev_put(in_dev);
917 kfree_skb(skb);
918 return 0;
921 static void parp_redo(struct sk_buff *skb)
923 arp_process(skb);
928 * Receive an arp request from the device layer.
931 static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
932 struct packet_type *pt, struct net_device *orig_dev)
934 struct arphdr *arp;
936 /* ARP header, plus 2 device addresses, plus 2 IP addresses. */
937 if (!pskb_may_pull(skb, (sizeof(struct arphdr) +
938 (2 * dev->addr_len) +
939 (2 * sizeof(u32)))))
940 goto freeskb;
942 arp = skb->nh.arph;
943 if (arp->ar_hln != dev->addr_len ||
944 dev->flags & IFF_NOARP ||
945 skb->pkt_type == PACKET_OTHERHOST ||
946 skb->pkt_type == PACKET_LOOPBACK ||
947 arp->ar_pln != 4)
948 goto freeskb;
950 if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
951 goto out_of_mem;
953 memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
955 return NF_HOOK(NF_ARP, NF_ARP_IN, skb, dev, NULL, arp_process);
957 freeskb:
958 kfree_skb(skb);
959 out_of_mem:
960 return 0;
964 * User level interface (ioctl)
968 * Set (create) an ARP cache entry.
971 static int arp_req_set(struct arpreq *r, struct net_device * dev)
973 u32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
974 struct neighbour *neigh;
975 int err;
977 if (r->arp_flags&ATF_PUBL) {
978 u32 mask = ((struct sockaddr_in *) &r->arp_netmask)->sin_addr.s_addr;
979 if (mask && mask != 0xFFFFFFFF)
980 return -EINVAL;
981 if (!dev && (r->arp_flags & ATF_COM)) {
982 dev = dev_getbyhwaddr(r->arp_ha.sa_family, r->arp_ha.sa_data);
983 if (!dev)
984 return -ENODEV;
986 if (mask) {
987 if (pneigh_lookup(&arp_tbl, &ip, dev, 1) == NULL)
988 return -ENOBUFS;
989 return 0;
991 if (dev == NULL) {
992 ipv4_devconf.proxy_arp = 1;
993 return 0;
995 if (__in_dev_get_rtnl(dev)) {
996 __in_dev_get_rtnl(dev)->cnf.proxy_arp = 1;
997 return 0;
999 return -ENXIO;
1002 if (r->arp_flags & ATF_PERM)
1003 r->arp_flags |= ATF_COM;
1004 if (dev == NULL) {
1005 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1006 .tos = RTO_ONLINK } } };
1007 struct rtable * rt;
1008 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1009 return err;
1010 dev = rt->u.dst.dev;
1011 ip_rt_put(rt);
1012 if (!dev)
1013 return -EINVAL;
1015 switch (dev->type) {
1016 #ifdef CONFIG_FDDI
1017 case ARPHRD_FDDI:
1019 * According to RFC 1390, FDDI devices should accept ARP
1020 * hardware types of 1 (Ethernet). However, to be more
1021 * robust, we'll accept hardware types of either 1 (Ethernet)
1022 * or 6 (IEEE 802.2).
1024 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1025 r->arp_ha.sa_family != ARPHRD_ETHER &&
1026 r->arp_ha.sa_family != ARPHRD_IEEE802)
1027 return -EINVAL;
1028 break;
1029 #endif
1030 default:
1031 if (r->arp_ha.sa_family != dev->type)
1032 return -EINVAL;
1033 break;
1036 neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1037 err = PTR_ERR(neigh);
1038 if (!IS_ERR(neigh)) {
1039 unsigned state = NUD_STALE;
1040 if (r->arp_flags & ATF_PERM)
1041 state = NUD_PERMANENT;
1042 err = neigh_update(neigh, (r->arp_flags&ATF_COM) ?
1043 r->arp_ha.sa_data : NULL, state,
1044 NEIGH_UPDATE_F_OVERRIDE|
1045 NEIGH_UPDATE_F_ADMIN);
1046 neigh_release(neigh);
1048 return err;
1051 static unsigned arp_state_to_flags(struct neighbour *neigh)
1053 unsigned flags = 0;
1054 if (neigh->nud_state&NUD_PERMANENT)
1055 flags = ATF_PERM|ATF_COM;
1056 else if (neigh->nud_state&NUD_VALID)
1057 flags = ATF_COM;
1058 return flags;
1062 * Get an ARP cache entry.
1065 static int arp_req_get(struct arpreq *r, struct net_device *dev)
1067 u32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1068 struct neighbour *neigh;
1069 int err = -ENXIO;
1071 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1072 if (neigh) {
1073 read_lock_bh(&neigh->lock);
1074 memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1075 r->arp_flags = arp_state_to_flags(neigh);
1076 read_unlock_bh(&neigh->lock);
1077 r->arp_ha.sa_family = dev->type;
1078 strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1079 neigh_release(neigh);
1080 err = 0;
1082 return err;
1085 static int arp_req_delete(struct arpreq *r, struct net_device * dev)
1087 int err;
1088 u32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1089 struct neighbour *neigh;
1091 if (r->arp_flags & ATF_PUBL) {
1092 u32 mask =
1093 ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1094 if (mask == 0xFFFFFFFF)
1095 return pneigh_delete(&arp_tbl, &ip, dev);
1096 if (mask == 0) {
1097 if (dev == NULL) {
1098 ipv4_devconf.proxy_arp = 0;
1099 return 0;
1101 if (__in_dev_get_rtnl(dev)) {
1102 __in_dev_get_rtnl(dev)->cnf.proxy_arp = 0;
1103 return 0;
1105 return -ENXIO;
1107 return -EINVAL;
1110 if (dev == NULL) {
1111 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1112 .tos = RTO_ONLINK } } };
1113 struct rtable * rt;
1114 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1115 return err;
1116 dev = rt->u.dst.dev;
1117 ip_rt_put(rt);
1118 if (!dev)
1119 return -EINVAL;
1121 err = -ENXIO;
1122 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1123 if (neigh) {
1124 if (neigh->nud_state&~NUD_NOARP)
1125 err = neigh_update(neigh, NULL, NUD_FAILED,
1126 NEIGH_UPDATE_F_OVERRIDE|
1127 NEIGH_UPDATE_F_ADMIN);
1128 neigh_release(neigh);
1130 return err;
1134 * Handle an ARP layer I/O control request.
1137 int arp_ioctl(unsigned int cmd, void __user *arg)
1139 int err;
1140 struct arpreq r;
1141 struct net_device *dev = NULL;
1143 switch (cmd) {
1144 case SIOCDARP:
1145 case SIOCSARP:
1146 if (!capable(CAP_NET_ADMIN))
1147 return -EPERM;
1148 case SIOCGARP:
1149 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1150 if (err)
1151 return -EFAULT;
1152 break;
1153 default:
1154 return -EINVAL;
1157 if (r.arp_pa.sa_family != AF_INET)
1158 return -EPFNOSUPPORT;
1160 if (!(r.arp_flags & ATF_PUBL) &&
1161 (r.arp_flags & (ATF_NETMASK|ATF_DONTPUB)))
1162 return -EINVAL;
1163 if (!(r.arp_flags & ATF_NETMASK))
1164 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1165 htonl(0xFFFFFFFFUL);
1166 rtnl_lock();
1167 if (r.arp_dev[0]) {
1168 err = -ENODEV;
1169 if ((dev = __dev_get_by_name(r.arp_dev)) == NULL)
1170 goto out;
1172 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1173 if (!r.arp_ha.sa_family)
1174 r.arp_ha.sa_family = dev->type;
1175 err = -EINVAL;
1176 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1177 goto out;
1178 } else if (cmd == SIOCGARP) {
1179 err = -ENODEV;
1180 goto out;
1183 switch(cmd) {
1184 case SIOCDARP:
1185 err = arp_req_delete(&r, dev);
1186 break;
1187 case SIOCSARP:
1188 err = arp_req_set(&r, dev);
1189 break;
1190 case SIOCGARP:
1191 err = arp_req_get(&r, dev);
1192 if (!err && copy_to_user(arg, &r, sizeof(r)))
1193 err = -EFAULT;
1194 break;
1196 out:
1197 rtnl_unlock();
1198 return err;
1201 static int arp_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
1203 struct net_device *dev = ptr;
1205 switch (event) {
1206 case NETDEV_CHANGEADDR:
1207 neigh_changeaddr(&arp_tbl, dev);
1208 rt_cache_flush(0);
1209 break;
1210 default:
1211 break;
1214 return NOTIFY_DONE;
1217 static struct notifier_block arp_netdev_notifier = {
1218 .notifier_call = arp_netdev_event,
1221 /* Note, that it is not on notifier chain.
1222 It is necessary, that this routine was called after route cache will be
1223 flushed.
1225 void arp_ifdown(struct net_device *dev)
1227 neigh_ifdown(&arp_tbl, dev);
1232 * Called once on startup.
1235 static struct packet_type arp_packet_type = {
1236 .type = __constant_htons(ETH_P_ARP),
1237 .func = arp_rcv,
1240 static int arp_proc_init(void);
1242 void __init arp_init(void)
1244 neigh_table_init(&arp_tbl);
1246 dev_add_pack(&arp_packet_type);
1247 arp_proc_init();
1248 #ifdef CONFIG_SYSCTL
1249 neigh_sysctl_register(NULL, &arp_tbl.parms, NET_IPV4,
1250 NET_IPV4_NEIGH, "ipv4", NULL, NULL);
1251 #endif
1252 register_netdevice_notifier(&arp_netdev_notifier);
1255 #ifdef CONFIG_PROC_FS
1256 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1258 /* ------------------------------------------------------------------------ */
1260 * ax25 -> ASCII conversion
1262 static char *ax2asc2(ax25_address *a, char *buf)
1264 char c, *s;
1265 int n;
1267 for (n = 0, s = buf; n < 6; n++) {
1268 c = (a->ax25_call[n] >> 1) & 0x7F;
1270 if (c != ' ') *s++ = c;
1273 *s++ = '-';
1275 if ((n = ((a->ax25_call[6] >> 1) & 0x0F)) > 9) {
1276 *s++ = '1';
1277 n -= 10;
1280 *s++ = n + '0';
1281 *s++ = '\0';
1283 if (*buf == '\0' || *buf == '-')
1284 return "*";
1286 return buf;
1289 #endif /* CONFIG_AX25 */
1291 #define HBUFFERLEN 30
1293 static void arp_format_neigh_entry(struct seq_file *seq,
1294 struct neighbour *n)
1296 char hbuffer[HBUFFERLEN];
1297 const char hexbuf[] = "0123456789ABCDEF";
1298 int k, j;
1299 char tbuf[16];
1300 struct net_device *dev = n->dev;
1301 int hatype = dev->type;
1303 read_lock(&n->lock);
1304 /* Convert hardware address to XX:XX:XX:XX ... form. */
1305 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1306 if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1307 ax2asc2((ax25_address *)n->ha, hbuffer);
1308 else {
1309 #endif
1310 for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1311 hbuffer[k++] = hexbuf[(n->ha[j] >> 4) & 15];
1312 hbuffer[k++] = hexbuf[n->ha[j] & 15];
1313 hbuffer[k++] = ':';
1315 hbuffer[--k] = 0;
1316 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1318 #endif
1319 sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->primary_key));
1320 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1321 tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1322 read_unlock(&n->lock);
1325 static void arp_format_pneigh_entry(struct seq_file *seq,
1326 struct pneigh_entry *n)
1328 struct net_device *dev = n->dev;
1329 int hatype = dev ? dev->type : 0;
1330 char tbuf[16];
1332 sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->key));
1333 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1334 tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1335 dev ? dev->name : "*");
1338 static int arp_seq_show(struct seq_file *seq, void *v)
1340 if (v == SEQ_START_TOKEN) {
1341 seq_puts(seq, "IP address HW type Flags "
1342 "HW address Mask Device\n");
1343 } else {
1344 struct neigh_seq_state *state = seq->private;
1346 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1347 arp_format_pneigh_entry(seq, v);
1348 else
1349 arp_format_neigh_entry(seq, v);
1352 return 0;
1355 static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1357 /* Don't want to confuse "arp -a" w/ magic entries,
1358 * so we tell the generic iterator to skip NUD_NOARP.
1360 return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1363 /* ------------------------------------------------------------------------ */
1365 static struct seq_operations arp_seq_ops = {
1366 .start = arp_seq_start,
1367 .next = neigh_seq_next,
1368 .stop = neigh_seq_stop,
1369 .show = arp_seq_show,
1372 static int arp_seq_open(struct inode *inode, struct file *file)
1374 struct seq_file *seq;
1375 int rc = -ENOMEM;
1376 struct neigh_seq_state *s = kmalloc(sizeof(*s), GFP_KERNEL);
1378 if (!s)
1379 goto out;
1381 memset(s, 0, sizeof(*s));
1382 rc = seq_open(file, &arp_seq_ops);
1383 if (rc)
1384 goto out_kfree;
1386 seq = file->private_data;
1387 seq->private = s;
1388 out:
1389 return rc;
1390 out_kfree:
1391 kfree(s);
1392 goto out;
1395 static struct file_operations arp_seq_fops = {
1396 .owner = THIS_MODULE,
1397 .open = arp_seq_open,
1398 .read = seq_read,
1399 .llseek = seq_lseek,
1400 .release = seq_release_private,
1403 static int __init arp_proc_init(void)
1405 if (!proc_net_fops_create("arp", S_IRUGO, &arp_seq_fops))
1406 return -ENOMEM;
1407 return 0;
1410 #else /* CONFIG_PROC_FS */
1412 static int __init arp_proc_init(void)
1414 return 0;
1417 #endif /* CONFIG_PROC_FS */
1419 EXPORT_SYMBOL(arp_broken_ops);
1420 EXPORT_SYMBOL(arp_find);
1421 EXPORT_SYMBOL(arp_create);
1422 EXPORT_SYMBOL(arp_xmit);
1423 EXPORT_SYMBOL(arp_send);
1424 EXPORT_SYMBOL(arp_tbl);
1426 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
1427 EXPORT_SYMBOL(clip_tbl_hook);
1428 #endif