1 #ifndef SOUND_FIREWIRE_AMDTP_H_INCLUDED
2 #define SOUND_FIREWIRE_AMDTP_H_INCLUDED
5 #include <linux/interrupt.h>
6 #include <linux/mutex.h>
7 #include <linux/sched.h>
8 #include <sound/asound.h>
9 #include "packets-buffer.h"
12 * enum cip_flags - describes details of the streaming protocol
13 * @CIP_NONBLOCKING: In non-blocking mode, each packet contains
14 * sample_rate/8000 samples, with rounding up or down to adjust
15 * for clock skew and left-over fractional samples. This should
16 * be used if supported by the device.
17 * @CIP_BLOCKING: In blocking mode, each packet contains either zero or
18 * SYT_INTERVAL samples, with these two types alternating so that
19 * the overall sample rate comes out right.
20 * @CIP_EMPTY_WITH_TAG0: Only for in-stream. Empty in-packets have TAG0.
21 * @CIP_DBC_IS_END_EVENT: Only for in-stream. The value of dbc in an in-packet
22 * corresponds to the end of event in the packet. Out of IEC 61883.
23 * @CIP_WRONG_DBS: Only for in-stream. The value of dbs is wrong in in-packets.
24 * The value of data_block_quadlets is used instead of reported value.
25 * @CIP_SKIP_DBC_ZERO_CHECK: Only for in-stream. Packets with zero in dbc is
26 * skipped for detecting discontinuity.
27 * @CIP_EMPTY_HAS_WRONG_DBC: Only for in-stream. The value of dbc in empty
28 * packet is wrong but the others are correct.
29 * @CIP_JUMBO_PAYLOAD: Only for in-stream. The number of data blocks in an
30 * packet is larger than IEC 61883-6 defines. Current implementation
31 * allows 5 times as large as IEC 61883-6 defines.
34 CIP_NONBLOCKING
= 0x00,
36 CIP_EMPTY_WITH_TAG0
= 0x02,
37 CIP_DBC_IS_END_EVENT
= 0x04,
39 CIP_SKIP_DBC_ZERO_CHECK
= 0x10,
40 CIP_EMPTY_HAS_WRONG_DBC
= 0x20,
41 CIP_JUMBO_PAYLOAD
= 0x40,
45 * enum cip_sfc - supported Sampling Frequency Codes (SFCs)
46 * @CIP_SFC_32000: 32,000 data blocks
47 * @CIP_SFC_44100: 44,100 data blocks
48 * @CIP_SFC_48000: 48,000 data blocks
49 * @CIP_SFC_88200: 88,200 data blocks
50 * @CIP_SFC_96000: 96,000 data blocks
51 * @CIP_SFC_176400: 176,400 data blocks
52 * @CIP_SFC_192000: 192,000 data blocks
53 * @CIP_SFC_COUNT: the number of supported SFCs
55 * These values are used to show nominal Sampling Frequency Code in
56 * Format Dependent Field (FDF) of AMDTP packet header. In IEC 61883-6:2002,
57 * this code means the number of events per second. Actually the code
58 * represents the number of data blocks transferred per second in an AMDTP
61 * In IEC 61883-6:2005, some extensions were added to support more types of
62 * data such as 'One Bit LInear Audio', therefore the meaning of SFC became
63 * different depending on the types.
65 * Currently our implementation is compatible with IEC 61883-6:2002.
79 struct fw_iso_context
;
80 struct snd_pcm_substream
;
81 struct snd_pcm_runtime
;
83 enum amdtp_stream_direction
{
89 typedef unsigned int (*amdtp_stream_process_data_blocks_t
)(
90 struct amdtp_stream
*s
,
92 unsigned int data_blocks
,
97 enum amdtp_stream_direction direction
;
100 /* For packet processing. */
101 struct fw_iso_context
*context
;
102 struct iso_packets_buffer buffer
;
105 /* For CIP headers. */
106 unsigned int source_node_id_field
;
107 unsigned int data_block_quadlets
;
108 unsigned int data_block_counter
;
111 /* quirk: fixed interval of dbc between previos/current packets. */
112 unsigned int tx_dbc_interval
;
113 /* quirk: indicate the value of dbc field in a first packet. */
114 unsigned int tx_first_dbc
;
116 /* Internal flags. */
118 unsigned int syt_interval
;
119 unsigned int transfer_delay
;
120 unsigned int data_block_state
;
121 unsigned int last_syt_offset
;
122 unsigned int syt_offset_state
;
124 /* For a PCM substream processing. */
125 struct snd_pcm_substream
*pcm
;
126 struct tasklet_struct period_tasklet
;
127 unsigned int pcm_buffer_pointer
;
128 unsigned int pcm_period_pointer
;
130 /* To wait for first packet. */
132 wait_queue_head_t callback_wait
;
134 /* For backends to process data blocks. */
136 amdtp_stream_process_data_blocks_t process_data_blocks
;
139 int amdtp_stream_init(struct amdtp_stream
*s
, struct fw_unit
*unit
,
140 enum amdtp_stream_direction dir
, enum cip_flags flags
,
142 amdtp_stream_process_data_blocks_t process_data_blocks
,
143 unsigned int protocol_size
);
144 void amdtp_stream_destroy(struct amdtp_stream
*s
);
146 int amdtp_stream_set_parameters(struct amdtp_stream
*s
, unsigned int rate
,
147 unsigned int data_block_quadlets
);
148 unsigned int amdtp_stream_get_max_payload(struct amdtp_stream
*s
);
150 int amdtp_stream_start(struct amdtp_stream
*s
, int channel
, int speed
);
151 void amdtp_stream_update(struct amdtp_stream
*s
);
152 void amdtp_stream_stop(struct amdtp_stream
*s
);
154 int amdtp_stream_add_pcm_hw_constraints(struct amdtp_stream
*s
,
155 struct snd_pcm_runtime
*runtime
);
157 void amdtp_stream_pcm_prepare(struct amdtp_stream
*s
);
158 unsigned long amdtp_stream_pcm_pointer(struct amdtp_stream
*s
);
159 void amdtp_stream_pcm_abort(struct amdtp_stream
*s
);
161 extern const unsigned int amdtp_syt_intervals
[CIP_SFC_COUNT
];
162 extern const unsigned int amdtp_rate_table
[CIP_SFC_COUNT
];
165 * amdtp_stream_running - check stream is running or not
166 * @s: the AMDTP stream
168 * If this function returns true, the stream is running.
170 static inline bool amdtp_stream_running(struct amdtp_stream
*s
)
172 return !IS_ERR(s
->context
);
176 * amdtp_streaming_error - check for streaming error
177 * @s: the AMDTP stream
179 * If this function returns true, the stream's packet queue has stopped due to
180 * an asynchronous error.
182 static inline bool amdtp_streaming_error(struct amdtp_stream
*s
)
184 return s
->packet_index
< 0;
188 * amdtp_stream_pcm_running - check PCM substream is running or not
189 * @s: the AMDTP stream
191 * If this function returns true, PCM substream in the AMDTP stream is running.
193 static inline bool amdtp_stream_pcm_running(struct amdtp_stream
*s
)
199 * amdtp_stream_pcm_trigger - start/stop playback from a PCM device
200 * @s: the AMDTP stream
201 * @pcm: the PCM device to be started, or %NULL to stop the current device
203 * Call this function on a running isochronous stream to enable the actual
204 * transmission of PCM data. This function should be called from the PCM
205 * device's .trigger callback.
207 static inline void amdtp_stream_pcm_trigger(struct amdtp_stream
*s
,
208 struct snd_pcm_substream
*pcm
)
210 ACCESS_ONCE(s
->pcm
) = pcm
;
213 static inline bool cip_sfc_is_base_44100(enum cip_sfc sfc
)
219 * amdtp_stream_wait_callback - sleep till callbacked or timeout
220 * @s: the AMDTP stream
221 * @timeout: msec till timeout
223 * If this function return false, the AMDTP stream should be stopped.
225 static inline bool amdtp_stream_wait_callback(struct amdtp_stream
*s
,
226 unsigned int timeout
)
228 return wait_event_timeout(s
->callback_wait
,
229 s
->callbacked
== true,
230 msecs_to_jiffies(timeout
)) > 0;