1 What: /sys/bus/platform/devices/../fsi-master/fsi0/rescan
4 Contact: linux-fsi@lists.ozlabs.org
6 Initiates a FSI master scan for all connected slave devices
9 What: /sys/bus/platform/devices/../fsi-master/fsi0/break
12 Contact: linux-fsi@lists.ozlabs.org
14 Sends an FSI BREAK command on a master's communication
15 link to any connnected slaves. A BREAK resets connected
16 device's logic and preps it to receive further commands
19 What: /sys/bus/platform/devices/../fsi-master/fsi0/slave@00:00/term
22 Contact: linux-fsi@lists.ozlabs.org
24 Sends an FSI terminate command from the master to its
25 connected slave. A terminate resets the slave's state machines
26 that control access to the internally connected engines. In
27 addition the slave freezes its internal error register for
28 debugging purposes. This command is also needed to abort any
29 ongoing operation in case of an expired 'Master Time Out'
32 What: /sys/bus/platform/devices/../fsi-master/fsi0/slave@00:00/raw
35 Contact: linux-fsi@lists.ozlabs.org
37 Provides a means of reading/writing a 32 bit value from/to a
38 specified FSI bus address.
40 What: /sys/bus/platform/devices/../cfam_reset
43 Contact: linux-fsi@lists.ozlabs.org
45 Provides a means of resetting the cfam that is attached to the