Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt

   1 Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
   2
   3 Required properties:
   4  - compatible: value should be one of the following:
   5    "atmel,at91sam9n12-hlcdc"
   6    "atmel,at91sam9x5-hlcdc"
   7    "atmel,sama5d2-hlcdc"
   8    "atmel,sama5d3-hlcdc"
   9    "atmel,sama5d4-hlcdc"
  10    "microchip,sam9x60-hlcdc"
  11  - reg: base address and size of the HLCDC device registers.
  12  - clock-names: the name of the 3 clocks requested by the HLCDC device.
  13    Should contain "periph_clk", "sys_clk" and "slow_clk".
  14  - clocks: should contain the 3 clocks requested by the HLCDC device.
  15  - interrupts: should contain the description of the HLCDC interrupt line
  16
  17 The HLCDC IP exposes two subdevices:
  18  - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
  19  - a Display Controller: see ../display/atmel/hlcdc-dc.txt
  20
  21 Example:
  22
  23         hlcdc: hlcdc@f0030000 {
  24                 compatible = "atmel,sama5d3-hlcdc";
  25                 reg = <0xf0030000 0x2000>;
  26                 clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
  27                 clock-names = "periph_clk","sys_clk", "slow_clk";
  28                 interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
  29
  30                 hlcdc-display-controller {
  31                         compatible = "atmel,hlcdc-display-controller";
  32                         pinctrl-names = "default";
  33                         pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
  34                         #address-cells = <1>;
  35                         #size-cells = <0>;
  36
  37                         port@0 {
  38                                 #address-cells = <1>;
  39                                 #size-cells = <0>;
  40                                 reg = <0>;
  41
  42                                 hlcdc_panel_output: endpoint@0 {
  43                                         reg = <0>;
  44                                         remote-endpoint = <&panel_input>;
  45                                 };
  46                         };
  47                 };
  48
  49                 hlcdc_pwm: hlcdc-pwm {
  50                         compatible = "atmel,hlcdc-pwm";
  51                         pinctrl-names = "default";
  52                         pinctrl-0 = <&pinctrl_lcd_pwm>;
  53                         #pwm-cells = <3>;
  54                 };
  55         };