WIP FPC-III support
[linux/fpc-iii.git] / Documentation / devicetree / bindings / net / marvell-pp2.txt
blobb78397669320d125a2578e578f7264360a8770d0
1 * Marvell Armada 375 Ethernet Controller (PPv2.1)
2   Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
4 Required properties:
6 - compatible: should be one of:
7     "marvell,armada-375-pp2"
8     "marvell,armada-7k-pp2"
9 - reg: addresses and length of the register sets for the device.
10   For "marvell,armada-375-pp2", must contain the following register
11   sets:
12         - common controller registers
13         - LMS registers
14         - one register area per Ethernet port
15   For "marvell,armada-7k-pp2", must contain the following register
16   sets:
17         - packet processor registers
18         - networking interfaces registers
20 - clocks: pointers to the reference clocks for this device, consequently:
21         - main controller clock (for both armada-375-pp2 and armada-7k-pp2)
22         - GOP clock (for both armada-375-pp2 and armada-7k-pp2)
23         - MG clock (only for armada-7k-pp2)
24         - MG Core clock (only for armada-7k-pp2)
25         - AXI clock (only for armada-7k-pp2)
26 - clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
27   "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
29 The ethernet ports are represented by subnodes. At least one port is
30 required.
32 Required properties (port):
34 - interrupts: interrupt(s) for the port
35 - port-id: ID of the port from the MAC point of view
36 - gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
37   GOP (Group Of Ports) point of view. This ID is used to index the
38   per-port registers in the second register area.
39 - phy-mode: See ethernet.txt file in the same directory
41 Optional properties (port):
43 - marvell,loopback: port is loopback mode
44 - phy: a phandle to a phy node defining the PHY address (as the reg
45   property, a single integer).
46 - interrupt-names: if more than a single interrupt for is given, must be the
47                    name associated to the interrupts listed. Valid names are:
48                    "hifX", with X in [0..8], and "link". The names "tx-cpu0",
49                    "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
50                    for backward compatibility but shouldn't be used for new
51                    additions.
52 - marvell,system-controller: a phandle to the system controller.
54 Example for marvell,armada-375-pp2:
56 ethernet@f0000 {
57         compatible = "marvell,armada-375-pp2";
58         reg = <0xf0000 0xa000>,
59               <0xc0000 0x3060>,
60               <0xc4000 0x100>,
61               <0xc5000 0x100>;
62         clocks = <&gateclk 3>, <&gateclk 19>;
63         clock-names = "pp_clk", "gop_clk";
65         eth0: eth0@c4000 {
66                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
67                 port-id = <0>;
68                 phy = <&phy0>;
69                 phy-mode = "gmii";
70         };
72         eth1: eth1@c5000 {
73                 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
74                 port-id = <1>;
75                 phy = <&phy3>;
76                 phy-mode = "gmii";
77         };
80 Example for marvell,armada-7k-pp2:
82 cpm_ethernet: ethernet@0 {
83         compatible = "marvell,armada-7k-pp22";
84         reg = <0x0 0x100000>, <0x129000 0xb000>;
85         clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
86                  <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
87         clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
89         eth0: eth0 {
90                 interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
91                              <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
92                              <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
93                              <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
94                              <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
95                              <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
96                              <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
97                              <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
98                              <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
99                              <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
100                 interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
101                                   "hif5", "hif6", "hif7", "hif8", "link";
102                 port-id = <0>;
103                 gop-port-id = <0>;
104         };
106         eth1: eth1 {
107                 interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
108                              <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
109                              <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
110                              <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
111                              <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
112                              <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
113                              <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
114                              <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
115                              <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
116                              <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
117                 interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
118                                   "hif5", "hif6", "hif7", "hif8", "link";
119                 port-id = <1>;
120                 gop-port-id = <2>;
121         };
123         eth2: eth2 {
124                 interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
125                              <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
126                              <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
127                              <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
128                              <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
129                              <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
130                              <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
131                              <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
132                              <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
133                              <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
134                 interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
135                                   "hif5", "hif6", "hif7", "hif8", "link";
136                 port-id = <2>;
137                 gop-port-id = <3>;
138         };