Documentation/devicetree/bindings/spi/atmel-quadspi.txt

   1 * Atmel Quad Serial Peripheral Interface (QSPI)
   2
   3 Required properties:
   4 - compatible:     Should be one of the following:
   5                   - "atmel,sama5d2-qspi"
   6                   - "microchip,sam9x60-qspi"
   7 - reg:            Should contain the locations and lengths of the base registers
   8                   and the mapped memory.
   9 - reg-names:      Should contain the resource reg names:
  10                   - qspi_base: configuration register address space
  11                   - qspi_mmap: memory mapped address space
  12 - interrupts:     Should contain the interrupt for the device.
  13 - clocks:         Should reference the peripheral clock and the QSPI system
  14                   clock if available.
  15 - clock-names:    Should contain "pclk" for the peripheral clock and "qspick"
  16                   for the system clock when available.
  17 - #address-cells: Should be <1>.
  18 - #size-cells:    Should be <0>.
  19
  20 Example:
  21
  22 spi@f0020000 {
  23         compatible = "atmel,sama5d2-qspi";
  24         reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
  25         reg-names = "qspi_base", "qspi_mmap";
  26         interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
  27         clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
  28         clock-names = "pclk";
  29         #address-cells = <1>;
  30         #size-cells = <0>;
  31         pinctrl-names = "default";
  32         pinctrl-0 = <&pinctrl_spi0_default>;
  33
  34         m25p80@0 {
  35                 ...
  36         };
  37 };