WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / boot / dts / at91rm9200ek.dts
blobe1ef4e44e663d2c7c794dc54e48138ba60922017
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
4  *
5  *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
6  */
7 /dts-v1/;
8 #include "at91rm9200.dtsi"
10 / {
11         model = "Atmel AT91RM9200 evaluation kit";
12         compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
14         chosen {
15                 stdout-path = "serial0:115200n8";
16         };
18         memory@20000000 {
19                 reg = <0x20000000 0x4000000>;
20         };
22         clocks {
23                 slow_xtal {
24                         clock-frequency = <32768>;
25                 };
27                 main_xtal {
28                         clock-frequency = <18432000>;
29                 };
30         };
32         ahb {
33                 apb {
34                         tcb0: timer@fffa0000 {
35                                 timer@0 {
36                                         compatible = "atmel,tcb-timer";
37                                         reg = <0>, <1>;
38                                 };
40                                 timer@2 {
41                                         compatible = "atmel,tcb-timer";
42                                         reg = <2>;
43                                 };
44                         };
46                         usb1: gadget@fffb0000 {
47                                 atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
48                                 atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
49                                 status = "okay";
50                         };
52                         macb0: ethernet@fffbc000 {
53                                 phy-mode = "rmii";
54                                 status = "okay";
56                                 phy0: ethernet-phy {
57                                         interrupt-parent = <&pioC>;
58                                         interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
59                                 };
60                         };
62                         usart1: serial@fffc4000 {
63                                 pinctrl-0 =
64                                                 <&pinctrl_uart1
65                                                  &pinctrl_uart1_rts
66                                                  &pinctrl_uart1_cts
67                                                  &pinctrl_uart1_dtr_dsr
68                                                  &pinctrl_uart1_dcd
69                                                  &pinctrl_uart1_ri>;
70                                 status = "okay";
71                         };
73                         spi0: spi@fffe0000 {
74                                 status = "okay";
75                                 cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
76                                 mtd_dataflash@0 {
77                                         compatible = "atmel,at45", "atmel,dataflash";
78                                         spi-max-frequency = <15000000>;
79                                         reg = <0>;
80                                 };
81                         };
83                         dbgu: serial@fffff200 {
84                                 status = "okay";
85                         };
87                         rtc: rtc@fffffe00 {
88                                 status = "okay";
89                         };
90                 };
92                 usb0: ohci@300000 {
93                         num-ports = <2>;
94                         status = "okay";
95                 };
97                 nor_flash@10000000 {
98                         compatible = "cfi-flash";
99                         reg = <0x10000000 0x800000>;
100                         linux,mtd-name = "physmap-flash.0";
101                         bank-width = <2>;
102                         #address-cells = <1>;
103                         #size-cells = <1>;
105                         barebox@0 {
106                                 label = "barebox";
107                                 reg = <0x00000 0x40000>;
108                         };
110                         bareboxenv@40000 {
111                                 label = "bareboxenv";
112                                 reg = <0x40000 0x10000>;
113                         };
115                         kernel@50000 {
116                                 label = "kernel";
117                                 reg = <0x50000 0x300000>;
118                         };
120                         root@350000  {
121                                 label = "root";
122                                 reg = <0x350000 0x4B0000>;
123                         };
124                 };
125         };
127         leds {
128                 compatible = "gpio-leds";
130                 ds2 {
131                         label = "green";
132                         gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
133                         linux,default-trigger = "mmc0";
134                 };
136                 ds4 {
137                         label = "yellow";
138                         gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
139                         linux,default-trigger = "heartbeat";
140                 };
142                 ds6 {
143                         label = "red";
144                         gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
145                 };
146         };