arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Copyright 2016 Luxul Inc.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "bcm47094.dtsi"
   9 #include "bcm5301x-nand-cs0-bch4.dtsi"
  10
  11 / {
  12         compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
  13         model = "Luxul XWR-3100 V1";
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200 earlycon";
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x00000000 0x08000000
  22                        0x88000000 0x08000000>;
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 power   {
  29                         label = "bcm53xx:green:power";
  30                         gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
  31                         linux,default-trigger = "default-on";
  32                 };
  33
  34                 lan3    {
  35                         label = "bcm53xx:green:lan3";
  36                         gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 lan4    {
  40                         label = "bcm53xx:green:lan4";
  41                         gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wan     {
  45                         label = "bcm53xx:green:wan";
  46                         gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 lan1    {
  50                         label = "bcm53xx:green:lan1";
  51                         gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 lan2    {
  55                         label = "bcm53xx:green:lan2";
  56                         gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 usb3    {
  60                         label = "bcm53xx:green:usb3";
  61                         gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
  62                         trigger-sources = <&ohci_port1>, <&ehci_port1>,
  63                                           <&xhci_port1>;
  64                         linux,default-trigger = "usbport";
  65                 };
  66
  67                 status  {
  68                         label = "bcm53xx:green:status";
  69                         gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
  70                         linux,default-trigger = "timer";
  71                 };
  72
  73                 2ghz {
  74                         label = "bcm53xx:green:2ghz";
  75                         gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 5ghz {
  79                         label = "bcm53xx:green:5ghz";
  80                         gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
  81                 };
  82         };
  83
  84         gpio-keys {
  85                 compatible = "gpio-keys";
  86
  87                 restart {
  88                         label = "Reset";
  89                         linux,code = <KEY_RESTART>;
  90                         gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
  91                 };
  92         };
  93 };
  94
  95 &usb3 {
  96         vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
  97 };
  98
  99 &spi_nor {
 100         status = "okay";
 101 };
 102
 103 &usb3_phy {
 104         status = "okay";
 105 };
 106
 107 &srab {
 108         status = "okay";
 109
 110         ports {
 111                 port@0 {
 112                         reg = <0>;
 113                         label = "lan4";
 114                 };
 115
 116                 port@1 {
 117                         reg = <1>;
 118                         label = "lan3";
 119                 };
 120
 121                 port@2 {
 122                         reg = <2>;
 123                         label = "lan2";
 124                 };
 125
 126                 port@3 {
 127                         reg = <3>;
 128                         label = "lan1";
 129                 };
 130
 131                 port@4 {
 132                         reg = <4>;
 133                         label = "wan";
 134                 };
 135
 136                 port@5 {
 137                         reg = <5>;
 138                         label = "cpu";
 139                         ethernet = <&gmac0>;
 140                 };
 141         };
 142 };