WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / boot / dts / dra72x.dtsi
blobd403acc754b688192a3c7decc12b7f341ff945b0
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
4  *
5  * Based on "omap4.dtsi"
6  */
8 #include "dra7.dtsi"
10 / {
11         compatible = "ti,dra722", "ti,dra72", "ti,dra7";
13         aliases {
14                 rproc0 = &ipu1;
15                 rproc1 = &ipu2;
16                 rproc2 = &dsp1;
17         };
19         pmu {
20                 compatible = "arm,cortex-a15-pmu";
21                 interrupt-parent = <&wakeupgen>;
22                 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
23         };
26 &l4_per2 {
27         target-module@5b000 {                   /* 0x4845b000, ap 59 46.0 */
28                 compatible = "ti,sysc-omap4", "ti,sysc";
29                 reg = <0x5b000 0x4>,
30                       <0x5b010 0x4>;
31                 reg-names = "rev", "sysc";
32                 ti,sysc-midle = <SYSC_IDLE_FORCE>,
33                                 <SYSC_IDLE_NO>;
34                 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
35                                 <SYSC_IDLE_NO>;
36                 clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
37                 clock-names = "fck";
38                 #address-cells = <1>;
39                 #size-cells = <1>;
40                 ranges = <0x0 0x5b000 0x1000>;
42                 cal: cal@0 {
43                         compatible = "ti,dra72-cal";
44                         reg = <0x0000 0x400>,
45                               <0x0800 0x40>,
46                               <0x0900 0x40>;
47                         reg-names = "cal_top",
48                                     "cal_rx_core0",
49                                     "cal_rx_core1";
50                         interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
51                         ti,camerrx-control = <&scm_conf 0xE94>;
53                         ports {
54                                 #address-cells = <1>;
55                                 #size-cells = <0>;
57                                 csi2_0: port@0 {
58                                         reg = <0>;
59                                 };
60                                 csi2_1: port@1 {
61                                         reg = <1>;
62                                 };
63                         };
64                 };
65         };
68 &dss {
69         reg = <0 0x80>,
70               <0x4054 0x4>,
71               <0x4300 0x20>;
72         reg-names = "dss", "pll1_clkctrl", "pll1";
74         clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
75                  <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>;
76         clock-names = "fck", "video1_clk";
79 &mailbox5 {
80         mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
81                 ti,mbox-tx = <6 2 2>;
82                 ti,mbox-rx = <4 2 2>;
83                 status = "disabled";
84         };
85         mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
86                 ti,mbox-tx = <5 2 2>;
87                 ti,mbox-rx = <1 2 2>;
88                 status = "disabled";
89         };
92 &mailbox6 {
93         mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
94                 ti,mbox-tx = <6 2 2>;
95                 ti,mbox-rx = <4 2 2>;
96                 status = "disabled";
97         };
100 &pcie1_rc {
101         compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
104 &pcie1_ep {
105         compatible = "ti,dra726-pcie-ep", "ti,dra7-pcie-ep";
108 &pcie2_rc {
109         compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
112 &usb4_tm {
113         status = "disabled";