arch/arm/boot/dts/exynos4412-midas.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Samsung's Exynos4412 based Trats 2 board device tree source
   4  *
   5  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   6  *              http://www.samsung.com
   7  *
   8  * Device tree source file for Samsung's Trats 2 board which is based on
   9  * Samsung's Exynos4412 SoC.
  10  */
  11
  12 /dts-v1/;
  13 #include "exynos4412.dtsi"
  14 #include "exynos4412-ppmu-common.dtsi"
  15 #include <dt-bindings/gpio/gpio.h>
  16 #include <dt-bindings/input/input.h>
  17 #include <dt-bindings/interrupt-controller/irq.h>
  18 #include <dt-bindings/clock/maxim,max77686.h>
  19 #include <dt-bindings/pinctrl/samsung.h>
  20
  21 / {
  22         compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
  23
  24         aliases {
  25                 i2c11 = &i2c_max77693;
  26                 i2c12 = &i2c_max77693_fuel;
  27         };
  28
  29         chosen {
  30                 stdout-path = &serial_2;
  31         };
  32
  33         firmware@204f000 {
  34                 compatible = "samsung,secure-firmware";
  35                 reg = <0x0204F000 0x1000>;
  36         };
  37
  38         fixed-rate-clocks {
  39                 xxti {
  40                         compatible = "samsung,clock-xxti";
  41                         clock-frequency = <0>;
  42                 };
  43
  44                 xusbxti {
  45                         compatible = "samsung,clock-xusbxti";
  46                         clock-frequency = <24000000>;
  47                 };
  48         };
  49
  50         cam_io_reg: voltage-regulator-1 {
  51                 compatible = "regulator-fixed";
  52                 regulator-name = "CAM_SENSOR_A";
  53                 regulator-min-microvolt = <2800000>;
  54                 regulator-max-microvolt = <2800000>;
  55                 enable-active-high;
  56                 status = "disabled";
  57         };
  58
  59         cam_af_reg: voltage-regulator-2 {
  60                 compatible = "regulator-fixed";
  61                 regulator-name = "CAM_AF";
  62                 regulator-min-microvolt = <2800000>;
  63                 regulator-max-microvolt = <2800000>;
  64                 enable-active-high;
  65                 status = "disabled";
  66         };
  67
  68         vsil12: voltage-regulator-3 {
  69                 compatible = "regulator-fixed";
  70                 regulator-name = "VSIL_1.2V";
  71                 regulator-min-microvolt = <1200000>;
  72                 regulator-max-microvolt = <1200000>;
  73                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  74                 enable-active-high;
  75                 vin-supply = <&buck7_reg>;
  76         };
  77
  78         vcc33mhl: voltage-regulator-4 {
  79                 compatible = "regulator-fixed";
  80                 regulator-name = "VCC_3.3_MHL";
  81                 regulator-min-microvolt = <3300000>;
  82                 regulator-max-microvolt = <3300000>;
  83                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  84                 enable-active-high;
  85         };
  86
  87         vcc18mhl: voltage-regulator-5 {
  88                 compatible = "regulator-fixed";
  89                 regulator-name = "VCC_1.8_MHL";
  90                 regulator-min-microvolt = <1800000>;
  91                 regulator-max-microvolt = <1800000>;
  92                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  93                 enable-active-high;
  94         };
  95
  96         touchkey_reg: voltage-regulator-6 {
  97                 compatible = "regulator-fixed";
  98                 regulator-name = "LED_VDD_3.3V";
  99                 regulator-min-microvolt = <3300000>;
 100                 regulator-max-microvolt = <3300000>;
 101                 enable-active-high;
 102                 status = "disabled";
 103         };
 104
 105         vbatt_reg: voltage-regulator-7 {
 106                 compatible = "regulator-fixed";
 107                 regulator-name = "VBATT";
 108                 regulator-min-microvolt = <5000000>;
 109                 regulator-max-microvolt = <5000000>;
 110                 regulator-always-on;
 111         };
 112
 113         mic_bias_reg: voltage-regulator-8 {
 114                 compatible = "regulator-fixed";
 115                 regulator-name = "MICBIAS_LDO_2.8V";
 116                 regulator-min-microvolt = <2800000>;
 117                 regulator-max-microvolt = <2800000>;
 118                 gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
 119                 enable-active-high;
 120         };
 121
 122         submic_bias_reg: voltage-regulator-9 {
 123                 compatible = "regulator-fixed";
 124                 regulator-name = "SUB_MICBIAS_LDO_2.8V";
 125                 regulator-min-microvolt = <2800000>;
 126                 regulator-max-microvolt = <2800000>;
 127         };
 128
 129         gpio-keys {
 130                 compatible = "gpio-keys";
 131                 pinctrl-names = "default";
 132                 pinctrl-0 = <&gpio_keys>;
 133
 134                 key-down {
 135                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 136                         linux,code = <114>;
 137                         label = "volume down";
 138                         debounce-interval = <10>;
 139                 };
 140
 141                 key-up {
 142                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 143                         linux,code = <115>;
 144                         label = "volume up";
 145                         debounce-interval = <10>;
 146                 };
 147
 148                 key-power {
 149                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 150                         linux,code = <116>;
 151                         label = "power";
 152                         debounce-interval = <10>;
 153                         wakeup-source;
 154                 };
 155
 156                 key-ok {
 157                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 158                         linux,code = <139>;
 159                         label = "ok";
 160                         debounce-interval = <10>;
 161                         wakeup-source;
 162                 };
 163         };
 164
 165         i2c_max77693: i2c-gpio-1 {
 166                 compatible = "i2c-gpio";
 167                 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 168                 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 169                 i2c-gpio,delay-us = <2>;
 170                 #address-cells = <1>;
 171                 #size-cells = <0>;
 172
 173                 pmic@66 {
 174                         compatible = "maxim,max77693";
 175                         interrupt-parent = <&gpx1>;
 176                         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 177                         pinctrl-names = "default";
 178                         pinctrl-0 = <&max77693_irq>;
 179                         reg = <0x66>;
 180
 181                         regulators {
 182                                 esafeout1_reg: ESAFEOUT1 {
 183                                         regulator-name = "ESAFEOUT1";
 184                                 };
 185                                 esafeout2_reg: ESAFEOUT2 {
 186                                         regulator-name = "ESAFEOUT2";
 187                                 };
 188                                 charger_reg: CHARGER {
 189                                         regulator-name = "CHARGER";
 190                                         regulator-min-microamp = <60000>;
 191                                         regulator-max-microamp = <2580000>;
 192                                 };
 193                         };
 194
 195                         motor-driver {
 196                                 compatible = "maxim,max77693-haptic";
 197                                 haptic-supply = <&ldo26_reg>;
 198                                 pwms = <&pwm 0 38022 0>;
 199                         };
 200
 201                         charger {
 202                                 compatible = "maxim,max77693-charger";
 203
 204                                 maxim,constant-microvolt = <4350000>;
 205                                 maxim,min-system-microvolt = <3600000>;
 206                                 maxim,thermal-regulation-celsius = <100>;
 207                                 maxim,battery-overcurrent-microamp = <3500000>;
 208                                 maxim,charge-input-threshold-microvolt = <4300000>;
 209                         };
 210                 };
 211         };
 212
 213         i2c_max77693_fuel: i2c-gpio-3 {
 214                 compatible = "i2c-gpio";
 215                 sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 216                 scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 217                 i2c-gpio,delay-us = <2>;
 218                 #address-cells = <1>;
 219                 #size-cells = <0>;
 220
 221                 fuel-gauge@36 {
 222                         compatible = "maxim,max17047";
 223                         interrupt-parent = <&gpx2>;
 224                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 225                         pinctrl-names = "default";
 226                         pinctrl-0 = <&max77693_fuel_irq>;
 227                         reg = <0x36>;
 228
 229                         maxim,over-heat-temp = <700>;
 230                         maxim,over-volt = <4500>;
 231                 };
 232         };
 233
 234         i2c-gpio-4 {
 235                 compatible = "i2c-gpio";
 236                 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 237                 scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 238                 i2c-gpio,delay-us = <2>;
 239                 #address-cells = <1>;
 240                 #size-cells = <0>;
 241
 242                 touchkey@20 {
 243                         compatible = "cypress,midas-touchkey";
 244                         reg = <0x20>;
 245                         vdd-supply = <&touchkey_reg>;
 246                         vcc-supply = <&ldo5_reg>;
 247                         interrupt-parent = <&gpj0>;
 248                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 249                         linux,keycodes = <KEY_BACK KEY_MENU>;
 250                 };
 251         };
 252
 253         i2c-mhl {
 254                 compatible = "i2c-gpio";
 255                 sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 256                 scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 257                 i2c-gpio,delay-us = <100>;
 258                 #address-cells = <1>;
 259                 #size-cells = <0>;
 260
 261                 pinctrl-0 = <&i2c_mhl_bus>;
 262                 pinctrl-names = "default";
 263
 264                 sii9234: hdmi-bridge@39 {
 265                         compatible = "sil,sii9234";
 266                         avcc33-supply = <&vcc33mhl>;
 267                         iovcc18-supply = <&vcc18mhl>;
 268                         avcc12-supply = <&vsil12>;
 269                         cvcc12-supply = <&vsil12>;
 270                         reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
 271                         interrupt-parent = <&gpf3>;
 272                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 273                         reg = <0x39>;
 274
 275                         port {
 276                                 mhl_to_hdmi: endpoint {
 277                                         remote-endpoint = <&hdmi_to_mhl>;
 278                                 };
 279                         };
 280                 };
 281         };
 282
 283         wlan_pwrseq: sdhci3-pwrseq {
 284                 compatible = "mmc-pwrseq-simple";
 285                 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
 286                 clocks = <&max77686 MAX77686_CLK_PMIC>;
 287                 clock-names = "ext_clock";
 288         };
 289
 290         sound: sound {
 291                 compatible = "samsung,midas-audio";
 292                 model = "Midas";
 293                 mic-bias-supply = <&mic_bias_reg>;
 294                 submic-bias-supply = <&submic_bias_reg>;
 295
 296                 cpu {
 297                         sound-dai = <&i2s0 0>;
 298                 };
 299                 codec {
 300                         sound-dai = <&wm1811>;
 301                 };
 302         };
 303
 304         thermistor-ap {
 305                 compatible = "murata,ncp15wb473";
 306                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 307                 pullup-ohm = <100000>;   /* 100K */
 308                 pulldown-ohm = <100000>; /* 100K */
 309                 io-channels = <&adc 1>;  /* AP temperature */
 310         };
 311
 312         thermistor-battery {
 313                 compatible = "murata,ncp15wb473";
 314                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 315                 pullup-ohm = <100000>;   /* 100K */
 316                 pulldown-ohm = <100000>; /* 100K */
 317                 io-channels = <&adc 2>;  /* Battery temperature */
 318         };
 319 };
 320
 321 &adc {
 322         vdd-supply = <&ldo3_reg>;
 323         status = "okay";
 324 };
 325
 326 &bus_dmc {
 327         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 328         vdd-supply = <&buck1_reg>;
 329         status = "okay";
 330 };
 331
 332 &bus_acp {
 333         devfreq = <&bus_dmc>;
 334         status = "okay";
 335 };
 336
 337 &bus_c2c {
 338         devfreq = <&bus_dmc>;
 339         status = "okay";
 340 };
 341
 342 &bus_leftbus {
 343         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 344         vdd-supply = <&buck3_reg>;
 345         status = "okay";
 346 };
 347
 348 &bus_rightbus {
 349         devfreq = <&bus_leftbus>;
 350         status = "okay";
 351 };
 352
 353 &bus_display {
 354         devfreq = <&bus_leftbus>;
 355         status = "okay";
 356 };
 357
 358 &bus_fsys {
 359         devfreq = <&bus_leftbus>;
 360         status = "okay";
 361 };
 362
 363 &bus_peri {
 364         devfreq = <&bus_leftbus>;
 365         status = "okay";
 366 };
 367
 368 &bus_mfc {
 369         devfreq = <&bus_leftbus>;
 370         status = "okay";
 371 };
 372
 373 &camera {
 374         pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 375         pinctrl-names = "default";
 376         status = "okay";
 377         assigned-clocks = <&clock CLK_MOUT_CAM0>,
 378                 <&clock CLK_MOUT_CAM1>;
 379         assigned-clock-parents = <&clock CLK_XUSBXTI>,
 380                 <&clock CLK_XUSBXTI>;
 381 };
 382
 383 &cpu0 {
 384         cpu0-supply = <&buck2_reg>;
 385 };
 386
 387 &cpu_thermal {
 388         cooling-maps {
 389                 map0 {
 390                         /* Corresponds to 800MHz at freq_table */
 391                         cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
 392                                          <&cpu2 7 7>, <&cpu3 7 7>;
 393                 };
 394                 map1 {
 395                         /* Corresponds to 200MHz at freq_table */
 396                         cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
 397                                          <&cpu2 13 13>, <&cpu3 13 13>;
 398                 };
 399         };
 400 };
 401
 402 &csis_0 {
 403         status = "okay";
 404         vddcore-supply = <&ldo8_reg>;
 405         vddio-supply = <&ldo10_reg>;
 406         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 407                         <&clock CLK_SCLK_CSIS0>;
 408         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 409         assigned-clock-rates = <0>, <176000000>;
 410
 411         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 412         port@3 {
 413                 reg = <3>;
 414                 csis0_ep: endpoint {
 415                         remote-endpoint = <&s5c73m3_ep>;
 416                         data-lanes = <1 2 3 4>;
 417                         samsung,csis-hs-settle = <12>;
 418                 };
 419         };
 420 };
 421
 422 &csis_1 {
 423         status = "okay";
 424         vddcore-supply = <&ldo8_reg>;
 425         vddio-supply = <&ldo10_reg>;
 426         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 427                         <&clock CLK_SCLK_CSIS1>;
 428         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 429         assigned-clock-rates = <0>, <176000000>;
 430
 431         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 432         port@4 {
 433                 reg = <4>;
 434                 csis1_ep: endpoint {
 435                         remote-endpoint = <&is_s5k6a3_ep>;
 436                         data-lanes = <1>;
 437                         samsung,csis-hs-settle = <18>;
 438                         samsung,csis-wclk;
 439                 };
 440         };
 441 };
 442
 443 &dsi_0 {
 444         vddcore-supply = <&ldo8_reg>;
 445         vddio-supply = <&ldo10_reg>;
 446         samsung,burst-clock-frequency = <500000000>;
 447         samsung,esc-clock-frequency = <20000000>;
 448         samsung,pll-clock-frequency = <24000000>;
 449 };
 450
 451 &exynos_usbphy {
 452         vbus-supply = <&esafeout1_reg>;
 453         status = "okay";
 454 };
 455
 456 &fimc_0 {
 457         status = "okay";
 458         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 459                         <&clock CLK_SCLK_FIMC0>;
 460         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 461         assigned-clock-rates = <0>, <176000000>;
 462 };
 463
 464 &fimc_1 {
 465         status = "okay";
 466         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 467                         <&clock CLK_SCLK_FIMC1>;
 468         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 469         assigned-clock-rates = <0>, <176000000>;
 470 };
 471
 472 &fimc_2 {
 473         status = "okay";
 474         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 475                         <&clock CLK_SCLK_FIMC2>;
 476         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 477         assigned-clock-rates = <0>, <176000000>;
 478 };
 479
 480 &fimc_3 {
 481         status = "okay";
 482         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 483                         <&clock CLK_SCLK_FIMC3>;
 484         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 485         assigned-clock-rates = <0>, <176000000>;
 486 };
 487
 488 &fimc_is {
 489         pinctrl-0 = <&fimc_is_uart>;
 490         pinctrl-names = "default";
 491         status = "okay";
 492
 493         };
 494
 495 &fimc_lite_0 {
 496         status = "okay";
 497 };
 498
 499 &fimc_lite_1 {
 500         status = "okay";
 501 };
 502
 503 &fimd {
 504         status = "okay";
 505 };
 506
 507 &gpu {
 508         mali-supply = <&buck4_reg>;
 509         status = "okay";
 510 };
 511
 512 &hdmi {
 513         hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 514         pinctrl-names = "default";
 515         pinctrl-0 = <&hdmi_hpd>;
 516         vdd-supply = <&ldo3_reg>;
 517         vdd_osc-supply = <&ldo4_reg>;
 518         vdd_pll-supply = <&ldo3_reg>;
 519         ddc = <&i2c_5>;
 520         status = "okay";
 521
 522         ports {
 523                 #address-cells = <1>;
 524                 #size-cells = <0>;
 525
 526                 port@1 {
 527                         reg = <1>;
 528                         hdmi_to_mhl: endpoint {
 529                                 remote-endpoint = <&mhl_to_hdmi>;
 530                         };
 531                 };
 532         };
 533 };
 534
 535 &hsotg {
 536         vusb_d-supply = <&ldo15_reg>;
 537         vusb_a-supply = <&ldo12_reg>;
 538         dr_mode = "peripheral";
 539         status = "okay";
 540 };
 541
 542 &i2c_0 {
 543         samsung,i2c-sda-delay = <100>;
 544         samsung,i2c-slave-addr = <0x10>;
 545         samsung,i2c-max-bus-freq = <400000>;
 546         pinctrl-0 = <&i2c0_bus>;
 547         pinctrl-names = "default";
 548         status = "okay";
 549
 550         s5c73m3: image-sensor@3c {
 551                 compatible = "samsung,s5c73m3";
 552                 reg = <0x3c>;
 553                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 554                 vdd-int-supply = <&buck9_reg>;
 555                 vddio-cis-supply = <&ldo9_reg>;
 556                 vddio-host-supply = <&ldo18_reg>;
 557                 vdd-af-supply = <&cam_af_reg>;
 558                 vdd-reg-supply = <&cam_io_reg>;
 559                 clock-frequency = <24000000>;
 560                 /* CAM_A_CLKOUT */
 561                 clocks = <&camera 0>;
 562                 clock-names = "cis_extclk";
 563                 status = "disabled";
 564                 port {
 565                         s5c73m3_ep: endpoint {
 566                                 remote-endpoint = <&csis0_ep>;
 567                                 data-lanes = <1 2 3 4>;
 568                         };
 569                 };
 570         };
 571 };
 572
 573 &i2c1_isp {
 574         pinctrl-0 = <&fimc_is_i2c1>;
 575         pinctrl-names = "default";
 576
 577         image-sensor@10 {
 578                 compatible = "samsung,s5k6a3";
 579                 reg = <0x10>;
 580                 svdda-supply = <&cam_io_reg>;
 581                 svddio-supply = <&ldo19_reg>;
 582                 afvdd-supply = <&ldo19_reg>;
 583                 clock-frequency = <24000000>;
 584                 /* CAM_B_CLKOUT */
 585                 clocks = <&camera 1>;
 586                 clock-names = "extclk";
 587                 samsung,camclk-out = <1>;
 588                 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 589
 590                 port {
 591                         is_s5k6a3_ep: endpoint {
 592                                 remote-endpoint = <&csis1_ep>;
 593                                 data-lanes = <1>;
 594                         };
 595                 };
 596         };
 597 };
 598
 599 &i2c_3 {
 600         samsung,i2c-sda-delay = <100>;
 601         samsung,i2c-slave-addr = <0x10>;
 602         samsung,i2c-max-bus-freq = <400000>;
 603         pinctrl-0 = <&i2c3_bus>;
 604         pinctrl-names = "default";
 605         status = "okay";
 606 };
 607
 608 &i2c_4 {
 609         samsung,i2c-sda-delay = <100>;
 610         samsung,i2c-slave-addr = <0x10>;
 611         samsung,i2c-max-bus-freq = <100000>;
 612         pinctrl-0 = <&i2c4_bus>;
 613         pinctrl-names = "default";
 614         status = "okay";
 615
 616         wm1811: audio-codec@1a {
 617                 compatible = "wlf,wm1811";
 618                 reg = <0x1a>;
 619                 clocks = <&pmu_system_controller 0>,
 620                         <&max77686 MAX77686_CLK_PMIC>;
 621                 clock-names = "MCLK1", "MCLK2";
 622                 interrupt-controller;
 623                 #interrupt-cells = <2>;
 624                 interrupt-parent = <&gpx3>;
 625                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
 626
 627                 gpio-controller;
 628                 #gpio-cells = <2>;
 629                 #sound-dai-cells = <0>;
 630
 631                 wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
 632                         0x0 0x8000 0x0 0x0 0x0>;
 633                 wlf,micbias-cfg = <0x2f 0x2b>;
 634
 635                 wlf,lineout1-feedback;
 636                 wlf,lineout1-se;
 637                 wlf,lineout2-se;
 638                 wlf,ldoena-always-driven;
 639
 640                 AVDD2-supply = <&vbatt_reg>;
 641                 DBVDD1-supply = <&ldo3_reg>;
 642                 DBVDD2-supply = <&vbatt_reg>;
 643                 DBVDD3-supply = <&vbatt_reg>;
 644                 DCVDD-supply = <&ldo3_reg>;
 645                 CPVDD-supply = <&vbatt_reg>;
 646                 SPKVDD1-supply = <&vbatt_reg>;
 647                 SPKVDD2-supply = <&vbatt_reg>;
 648                 wlf,ldo1ena = <&gpj0 4 0>;
 649                 wlf,ldo2ena = <&gpj0 4 0>;
 650         };
 651 };
 652
 653 &i2c_5 {
 654         status = "okay";
 655 };
 656
 657 &i2c_7 {
 658         samsung,i2c-sda-delay = <100>;
 659         samsung,i2c-slave-addr = <0x10>;
 660         samsung,i2c-max-bus-freq = <100000>;
 661         pinctrl-0 = <&i2c7_bus>;
 662         pinctrl-names = "default";
 663         status = "okay";
 664
 665         max77686: pmic@9 {
 666                 compatible = "maxim,max77686";
 667                 interrupt-parent = <&gpx0>;
 668                 interrupts = <7 IRQ_TYPE_NONE>;
 669                 pinctrl-0 = <&max77686_irq>;
 670                 pinctrl-names = "default";
 671                 reg = <0x09>;
 672                 #clock-cells = <1>;
 673
 674                 voltage-regulators {
 675                         ldo1_reg: LDO1 {
 676                                 regulator-name = "VALIVE_1.0V_AP";
 677                                 regulator-min-microvolt = <1000000>;
 678                                 regulator-max-microvolt = <1000000>;
 679                                 regulator-always-on;
 680                         };
 681
 682                         ldo2_reg: LDO2 {
 683                                 regulator-name = "VM1M2_1.2V_AP";
 684                                 regulator-min-microvolt = <1200000>;
 685                                 regulator-max-microvolt = <1200000>;
 686                                 regulator-always-on;
 687                                 regulator-state-mem {
 688                                         regulator-on-in-suspend;
 689                                 };
 690                         };
 691
 692                         ldo3_reg: LDO3 {
 693                                 regulator-name = "VCC_1.8V_AP";
 694                                 regulator-min-microvolt = <1800000>;
 695                                 regulator-max-microvolt = <1800000>;
 696                                 regulator-always-on;
 697                         };
 698
 699                         ldo4_reg: LDO4 {
 700                                 regulator-name = "VCC_2.8V_AP";
 701                                 regulator-min-microvolt = <2800000>;
 702                                 regulator-max-microvolt = <2800000>;
 703                                 regulator-always-on;
 704                         };
 705
 706                         ldo5_reg: LDO5 {
 707                                 regulator-name = "VCC_1.8V_IO";
 708                                 regulator-min-microvolt = <1800000>;
 709                                 regulator-max-microvolt = <1800000>;
 710                                 regulator-always-on;
 711                         };
 712
 713                         ldo6_reg: LDO6 {
 714                                 regulator-name = "VMPLL_1.0V_AP";
 715                                 regulator-min-microvolt = <1000000>;
 716                                 regulator-max-microvolt = <1000000>;
 717                                 regulator-always-on;
 718                                 regulator-state-mem {
 719                                         regulator-on-in-suspend;
 720                                 };
 721                         };
 722
 723                         ldo7_reg: LDO7 {
 724                                 regulator-name = "VPLL_1.0V_AP";
 725                                 regulator-min-microvolt = <1000000>;
 726                                 regulator-max-microvolt = <1000000>;
 727                                 regulator-always-on;
 728                                 regulator-state-mem {
 729                                         regulator-on-in-suspend;
 730                                 };
 731                         };
 732
 733                         ldo8_reg: LDO8 {
 734                                 regulator-name = "VMIPI_1.0V";
 735                                 regulator-min-microvolt = <1000000>;
 736                                 regulator-max-microvolt = <1000000>;
 737                                 regulator-state-mem {
 738                                         regulator-off-in-suspend;
 739                                 };
 740                         };
 741
 742                         ldo9_reg: LDO9 {
 743                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 744                                 regulator-min-microvolt = <1200000>;
 745                                 regulator-max-microvolt = <1200000>;
 746                         };
 747
 748                         ldo10_reg: LDO10 {
 749                                 regulator-name = "VMIPI_1.8V";
 750                                 regulator-min-microvolt = <1800000>;
 751                                 regulator-max-microvolt = <1800000>;
 752                                 regulator-state-mem {
 753                                         regulator-off-in-suspend;
 754                                 };
 755                         };
 756
 757                         ldo11_reg: LDO11 {
 758                                 regulator-name = "VABB1_1.95V";
 759                                 regulator-min-microvolt = <1950000>;
 760                                 regulator-max-microvolt = <1950000>;
 761                                 regulator-always-on;
 762                                 regulator-state-mem {
 763                                         regulator-off-in-suspend;
 764                                 };
 765                         };
 766
 767                         ldo12_reg: LDO12 {
 768                                 regulator-name = "VUOTG_3.0V";
 769                                 regulator-min-microvolt = <3000000>;
 770                                 regulator-max-microvolt = <3000000>;
 771                                 regulator-state-mem {
 772                                         regulator-off-in-suspend;
 773                                 };
 774                         };
 775
 776                         ldo13_reg: LDO13 {
 777                                 regulator-name = "NFC_AVDD_1.8V";
 778                                 regulator-min-microvolt = <1800000>;
 779                                 regulator-max-microvolt = <1800000>;
 780                         };
 781
 782                         ldo14_reg: LDO14 {
 783                                 regulator-name = "VABB2_1.95V";
 784                                 regulator-min-microvolt = <1950000>;
 785                                 regulator-max-microvolt = <1950000>;
 786                                 regulator-always-on;
 787                                 regulator-state-mem {
 788                                         regulator-off-in-suspend;
 789                                 };
 790                         };
 791
 792                         ldo15_reg: LDO15 {
 793                                 regulator-name = "VHSIC_1.0V";
 794                                 regulator-min-microvolt = <1000000>;
 795                                 regulator-max-microvolt = <1000000>;
 796                                 regulator-state-mem {
 797                                         regulator-on-in-suspend;
 798                                 };
 799                         };
 800
 801                         ldo16_reg: LDO16 {
 802                                 regulator-name = "VHSIC_1.8V";
 803                                 regulator-min-microvolt = <1800000>;
 804                                 regulator-max-microvolt = <1800000>;
 805                                 regulator-state-mem {
 806                                         regulator-on-in-suspend;
 807                                 };
 808                         };
 809
 810                         ldo17_reg: LDO17 {
 811                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 812                                 regulator-min-microvolt = <1200000>;
 813                                 regulator-max-microvolt = <1200000>;
 814                         };
 815
 816                         ldo18_reg: LDO18 {
 817                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 818                                 regulator-min-microvolt = <1800000>;
 819                                 regulator-max-microvolt = <1800000>;
 820                         };
 821
 822                         ldo19_reg: LDO19 {
 823                                 regulator-name = "VT_CAM_1.8V";
 824                                 regulator-min-microvolt = <1800000>;
 825                                 regulator-max-microvolt = <1800000>;
 826                         };
 827
 828                         ldo20_reg: LDO20 {
 829                                 regulator-name = "VDDQ_PRE_1.8V";
 830                                 regulator-min-microvolt = <1800000>;
 831                                 regulator-max-microvolt = <1800000>;
 832                         };
 833
 834                         ldo21_reg: LDO21 {
 835                                 regulator-name = "VTF_2.8V";
 836                                 regulator-min-microvolt = <2800000>;
 837                                 regulator-max-microvolt = <2800000>;
 838                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 839                         };
 840
 841                         ldo22_reg: LDO22 {
 842                                 regulator-name = "VMEM_VDD_2.8V";
 843                                 regulator-min-microvolt = <2800000>;
 844                                 regulator-max-microvolt = <2800000>;
 845                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 846                         };
 847
 848                         ldo23_reg: LDO23 {
 849                                 regulator-name = "TSP_AVDD_3.3V";
 850                                 regulator-min-microvolt = <3300000>;
 851                                 regulator-max-microvolt = <3300000>;
 852                         };
 853
 854                         ldo24_reg: LDO24 {
 855                                 regulator-name = "TSP_VDD_1.8V";
 856                                 regulator-min-microvolt = <1800000>;
 857                                 regulator-max-microvolt = <1800000>;
 858                         };
 859
 860                         ldo25_reg: LDO25 {
 861                                 regulator-name = "LDO25";
 862                         };
 863
 864                         ldo26_reg: LDO26 {
 865                                 regulator-name = "MOTOR_VCC_3.0V";
 866                                 regulator-min-microvolt = <3000000>;
 867                                 regulator-max-microvolt = <3000000>;
 868                         };
 869
 870                         buck1_reg: BUCK1 {
 871                                 regulator-name = "VDD_MIF";
 872                                 regulator-min-microvolt = <850000>;
 873                                 regulator-max-microvolt = <1100000>;
 874                                 regulator-always-on;
 875                                 regulator-boot-on;
 876                                 regulator-state-mem {
 877                                         regulator-off-in-suspend;
 878                                 };
 879                         };
 880
 881                         buck2_reg: BUCK2 {
 882                                 regulator-name = "VDD_ARM";
 883                                 regulator-min-microvolt = <850000>;
 884                                 regulator-max-microvolt = <1500000>;
 885                                 regulator-always-on;
 886                                 regulator-boot-on;
 887                                 regulator-state-mem {
 888                                         regulator-on-in-suspend;
 889                                 };
 890                         };
 891
 892                         buck3_reg: BUCK3 {
 893                                 regulator-name = "VDD_INT";
 894                                 regulator-min-microvolt = <850000>;
 895                                 regulator-max-microvolt = <1150000>;
 896                                 regulator-always-on;
 897                                 regulator-boot-on;
 898                                 regulator-state-mem {
 899                                         regulator-off-in-suspend;
 900                                 };
 901                         };
 902
 903                         buck4_reg: BUCK4 {
 904                                 regulator-name = "VDD_G3D";
 905                                 regulator-min-microvolt = <850000>;
 906                                 regulator-max-microvolt = <1150000>;
 907                                 regulator-boot-on;
 908                                 regulator-state-mem {
 909                                         regulator-off-in-suspend;
 910                                 };
 911                         };
 912
 913                         buck5_reg: BUCK5 {
 914                                 regulator-name = "VMEM_1.2V_AP";
 915                                 regulator-min-microvolt = <1200000>;
 916                                 regulator-max-microvolt = <1200000>;
 917                                 regulator-always-on;
 918                         };
 919
 920                         buck6_reg: BUCK6 {
 921                                 regulator-name = "VCC_SUB_1.35V";
 922                                 regulator-min-microvolt = <1350000>;
 923                                 regulator-max-microvolt = <1350000>;
 924                                 regulator-always-on;
 925                         };
 926
 927                         buck7_reg: BUCK7 {
 928                                 regulator-name = "VCC_SUB_2.0V";
 929                                 regulator-min-microvolt = <2000000>;
 930                                 regulator-max-microvolt = <2000000>;
 931                                 regulator-always-on;
 932                         };
 933
 934                         buck8_reg: BUCK8 {
 935                                 regulator-name = "VMEM_VDDF_3.0V";
 936                                 regulator-min-microvolt = <2850000>;
 937                                 regulator-max-microvolt = <2850000>;
 938                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 939                         };
 940
 941                         buck9_reg: BUCK9 {
 942                                 regulator-name = "CAM_ISP_CORE_1.2V";
 943                                 regulator-min-microvolt = <1000000>;
 944                                 regulator-max-microvolt = <1200000>;
 945                         };
 946                 };
 947         };
 948 };
 949
 950 &i2c_8 {
 951         status = "okay";
 952 };
 953
 954 &i2s0 {
 955         pinctrl-0 = <&i2s0_bus>;
 956         pinctrl-names = "default";
 957         status = "okay";
 958 };
 959
 960 &mixer {
 961         status = "okay";
 962 };
 963
 964 &mshc_0 {
 965         broken-cd;
 966         non-removable;
 967         card-detect-delay = <200>;
 968         vmmc-supply = <&ldo22_reg>;
 969         clock-frequency = <400000000>;
 970         samsung,dw-mshc-ciu-div = <0>;
 971         samsung,dw-mshc-sdr-timing = <2 3>;
 972         samsung,dw-mshc-ddr-timing = <1 2>;
 973         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 974         pinctrl-names = "default";
 975         status = "okay";
 976         bus-width = <8>;
 977         cap-mmc-highspeed;
 978 };
 979
 980 &pmu_system_controller {
 981         assigned-clocks = <&pmu_system_controller 0>;
 982         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 983 };
 984
 985 &pinctrl_0 {
 986         pinctrl-names = "default";
 987         pinctrl-0 = <&sleep0>;
 988
 989         mhl_int: mhl-int {
 990                 samsung,pins = "gpf3-5";
 991                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 992         };
 993
 994         i2c_mhl_bus: i2c-mhl-bus {
 995                 samsung,pins = "gpf0-4", "gpf0-6";
 996                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 997                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 998                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 999         };
1000
1001         sleep0: sleep-states {
1002                 PIN_SLP(gpa0-0, INPUT, NONE);
1003                 PIN_SLP(gpa0-1, OUT0, NONE);
1004                 PIN_SLP(gpa0-2, INPUT, NONE);
1005                 PIN_SLP(gpa0-3, INPUT, UP);
1006                 PIN_SLP(gpa0-4, INPUT, NONE);
1007                 PIN_SLP(gpa0-5, INPUT, DOWN);
1008                 PIN_SLP(gpa0-6, INPUT, DOWN);
1009                 PIN_SLP(gpa0-7, INPUT, UP);
1010
1011                 PIN_SLP(gpa1-0, INPUT, DOWN);
1012                 PIN_SLP(gpa1-1, INPUT, DOWN);
1013                 PIN_SLP(gpa1-2, INPUT, DOWN);
1014                 PIN_SLP(gpa1-3, INPUT, DOWN);
1015                 PIN_SLP(gpa1-4, INPUT, DOWN);
1016                 PIN_SLP(gpa1-5, INPUT, DOWN);
1017
1018                 PIN_SLP(gpb-0, INPUT, NONE);
1019                 PIN_SLP(gpb-1, INPUT, NONE);
1020                 PIN_SLP(gpb-2, INPUT, NONE);
1021                 PIN_SLP(gpb-3, INPUT, NONE);
1022                 PIN_SLP(gpb-4, INPUT, DOWN);
1023                 PIN_SLP(gpb-5, INPUT, UP);
1024                 PIN_SLP(gpb-6, INPUT, DOWN);
1025                 PIN_SLP(gpb-7, INPUT, DOWN);
1026
1027                 PIN_SLP(gpc0-0, INPUT, DOWN);
1028                 PIN_SLP(gpc0-1, INPUT, DOWN);
1029                 PIN_SLP(gpc0-2, INPUT, DOWN);
1030                 PIN_SLP(gpc0-3, INPUT, DOWN);
1031                 PIN_SLP(gpc0-4, INPUT, DOWN);
1032
1033                 PIN_SLP(gpc1-0, INPUT, NONE);
1034                 PIN_SLP(gpc1-1, PREV, NONE);
1035                 PIN_SLP(gpc1-2, INPUT, NONE);
1036                 PIN_SLP(gpc1-3, INPUT, NONE);
1037                 PIN_SLP(gpc1-4, INPUT, NONE);
1038
1039                 PIN_SLP(gpd0-0, INPUT, DOWN);
1040                 PIN_SLP(gpd0-1, INPUT, DOWN);
1041                 PIN_SLP(gpd0-2, INPUT, NONE);
1042                 PIN_SLP(gpd0-3, INPUT, NONE);
1043
1044                 PIN_SLP(gpd1-0, INPUT, DOWN);
1045                 PIN_SLP(gpd1-1, INPUT, DOWN);
1046                 PIN_SLP(gpd1-2, INPUT, NONE);
1047                 PIN_SLP(gpd1-3, INPUT, NONE);
1048
1049                 PIN_SLP(gpf0-0, INPUT, NONE);
1050                 PIN_SLP(gpf0-1, INPUT, NONE);
1051                 PIN_SLP(gpf0-2, INPUT, DOWN);
1052                 PIN_SLP(gpf0-3, INPUT, DOWN);
1053                 PIN_SLP(gpf0-4, INPUT, NONE);
1054                 PIN_SLP(gpf0-5, INPUT, DOWN);
1055                 PIN_SLP(gpf0-6, INPUT, NONE);
1056                 PIN_SLP(gpf0-7, INPUT, DOWN);
1057
1058                 PIN_SLP(gpf1-0, INPUT, DOWN);
1059                 PIN_SLP(gpf1-1, INPUT, DOWN);
1060                 PIN_SLP(gpf1-2, INPUT, DOWN);
1061                 PIN_SLP(gpf1-3, INPUT, DOWN);
1062                 PIN_SLP(gpf1-4, INPUT, NONE);
1063                 PIN_SLP(gpf1-5, INPUT, NONE);
1064                 PIN_SLP(gpf1-6, INPUT, DOWN);
1065                 PIN_SLP(gpf1-7, PREV, NONE);
1066
1067                 PIN_SLP(gpf2-0, PREV, NONE);
1068                 PIN_SLP(gpf2-1, INPUT, DOWN);
1069                 PIN_SLP(gpf2-2, INPUT, DOWN);
1070                 PIN_SLP(gpf2-3, INPUT, DOWN);
1071                 PIN_SLP(gpf2-4, INPUT, DOWN);
1072                 PIN_SLP(gpf2-5, INPUT, DOWN);
1073                 PIN_SLP(gpf2-6, INPUT, NONE);
1074                 PIN_SLP(gpf2-7, INPUT, NONE);
1075
1076                 PIN_SLP(gpf3-0, INPUT, NONE);
1077                 PIN_SLP(gpf3-1, PREV, NONE);
1078                 PIN_SLP(gpf3-2, PREV, NONE);
1079                 PIN_SLP(gpf3-3, PREV, NONE);
1080                 PIN_SLP(gpf3-4, OUT1, NONE);
1081                 PIN_SLP(gpf3-5, INPUT, DOWN);
1082
1083                 PIN_SLP(gpj0-0, PREV, NONE);
1084                 PIN_SLP(gpj0-1, PREV, NONE);
1085                 PIN_SLP(gpj0-2, PREV, NONE);
1086                 PIN_SLP(gpj0-3, INPUT, DOWN);
1087                 PIN_SLP(gpj0-4, PREV, NONE);
1088                 PIN_SLP(gpj0-5, PREV, NONE);
1089                 PIN_SLP(gpj0-6, INPUT, DOWN);
1090                 PIN_SLP(gpj0-7, INPUT, DOWN);
1091
1092                 PIN_SLP(gpj1-0, INPUT, DOWN);
1093                 PIN_SLP(gpj1-1, PREV, NONE);
1094                 PIN_SLP(gpj1-2, PREV, NONE);
1095                 PIN_SLP(gpj1-3, INPUT, DOWN);
1096                 PIN_SLP(gpj1-4, INPUT, DOWN);
1097         };
1098 };
1099
1100 &pinctrl_1 {
1101         pinctrl-names = "default";
1102         pinctrl-0 = <&sleep1>;
1103
1104         gpio_keys: gpio-keys {
1105                 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1106                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1107         };
1108
1109         bt_shutdown: bt-shutdown {
1110                 samsung,pins = "gpl0-6";
1111                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1112         };
1113
1114         bt_host_wakeup: bt-host-wakeup {
1115                 samsung,pins = "gpx2-6";
1116                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1117         };
1118
1119         bt_device_wakeup: bt-device-wakeup {
1120                 samsung,pins = "gpx3-1";
1121                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1122         };
1123
1124         max77686_irq: max77686-irq {
1125                 samsung,pins = "gpx0-7";
1126                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1127         };
1128
1129         max77693_irq: max77693-irq {
1130                 samsung,pins = "gpx1-5";
1131                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1132         };
1133
1134         max77693_fuel_irq: max77693-fuel-irq {
1135                 samsung,pins = "gpx2-3";
1136                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1137         };
1138
1139         sdhci2_cd: sdhci2-cd-irq {
1140                 samsung,pins = "gpx3-4";
1141                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1142         };
1143
1144         hdmi_hpd: hdmi-hpd {
1145                 samsung,pins = "gpx3-7";
1146                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1147         };
1148
1149         sleep1: sleep-states {
1150                 PIN_SLP(gpk0-0, PREV, NONE);
1151                 PIN_SLP(gpk0-1, PREV, NONE);
1152                 PIN_SLP(gpk0-2, OUT0, NONE);
1153                 PIN_SLP(gpk0-3, PREV, NONE);
1154                 PIN_SLP(gpk0-4, PREV, NONE);
1155                 PIN_SLP(gpk0-5, PREV, NONE);
1156                 PIN_SLP(gpk0-6, PREV, NONE);
1157
1158                 PIN_SLP(gpk1-0, INPUT, DOWN);
1159                 PIN_SLP(gpk1-1, INPUT, DOWN);
1160                 PIN_SLP(gpk1-2, INPUT, DOWN);
1161                 PIN_SLP(gpk1-3, PREV, NONE);
1162                 PIN_SLP(gpk1-4, PREV, NONE);
1163                 PIN_SLP(gpk1-5, PREV, NONE);
1164                 PIN_SLP(gpk1-6, PREV, NONE);
1165
1166                 PIN_SLP(gpk2-0, INPUT, DOWN);
1167                 PIN_SLP(gpk2-1, INPUT, DOWN);
1168                 PIN_SLP(gpk2-2, INPUT, DOWN);
1169                 PIN_SLP(gpk2-3, INPUT, DOWN);
1170                 PIN_SLP(gpk2-4, INPUT, DOWN);
1171                 PIN_SLP(gpk2-5, INPUT, DOWN);
1172                 PIN_SLP(gpk2-6, INPUT, DOWN);
1173
1174                 PIN_SLP(gpk3-0, OUT0, NONE);
1175                 PIN_SLP(gpk3-1, INPUT, NONE);
1176                 PIN_SLP(gpk3-2, INPUT, DOWN);
1177                 PIN_SLP(gpk3-3, INPUT, NONE);
1178                 PIN_SLP(gpk3-4, INPUT, NONE);
1179                 PIN_SLP(gpk3-5, INPUT, NONE);
1180                 PIN_SLP(gpk3-6, INPUT, NONE);
1181
1182                 PIN_SLP(gpl0-0, INPUT, DOWN);
1183                 PIN_SLP(gpl0-1, INPUT, DOWN);
1184                 PIN_SLP(gpl0-2, INPUT, DOWN);
1185                 PIN_SLP(gpl0-3, INPUT, DOWN);
1186                 PIN_SLP(gpl0-4, PREV, NONE);
1187                 PIN_SLP(gpl0-6, PREV, NONE);
1188
1189                 PIN_SLP(gpl1-0, INPUT, DOWN);
1190                 PIN_SLP(gpl1-1, INPUT, DOWN);
1191                 PIN_SLP(gpl2-0, INPUT, DOWN);
1192                 PIN_SLP(gpl2-1, INPUT, DOWN);
1193                 PIN_SLP(gpl2-2, INPUT, DOWN);
1194                 PIN_SLP(gpl2-3, INPUT, DOWN);
1195                 PIN_SLP(gpl2-4, INPUT, DOWN);
1196                 PIN_SLP(gpl2-5, INPUT, DOWN);
1197                 PIN_SLP(gpl2-6, PREV, NONE);
1198                 PIN_SLP(gpl2-7, INPUT, DOWN);
1199
1200                 PIN_SLP(gpm0-0, INPUT, DOWN);
1201                 PIN_SLP(gpm0-1, INPUT, DOWN);
1202                 PIN_SLP(gpm0-2, INPUT, DOWN);
1203                 PIN_SLP(gpm0-3, INPUT, DOWN);
1204                 PIN_SLP(gpm0-4, INPUT, DOWN);
1205                 PIN_SLP(gpm0-5, INPUT, DOWN);
1206                 PIN_SLP(gpm0-6, INPUT, DOWN);
1207                 PIN_SLP(gpm0-7, INPUT, DOWN);
1208
1209                 PIN_SLP(gpm1-0, INPUT, DOWN);
1210                 PIN_SLP(gpm1-1, INPUT, DOWN);
1211                 PIN_SLP(gpm1-2, INPUT, NONE);
1212                 PIN_SLP(gpm1-3, INPUT, NONE);
1213                 PIN_SLP(gpm1-4, INPUT, NONE);
1214                 PIN_SLP(gpm1-5, INPUT, NONE);
1215                 PIN_SLP(gpm1-6, INPUT, DOWN);
1216
1217                 PIN_SLP(gpm2-0, INPUT, NONE);
1218                 PIN_SLP(gpm2-1, INPUT, NONE);
1219                 PIN_SLP(gpm2-2, INPUT, DOWN);
1220                 PIN_SLP(gpm2-3, INPUT, DOWN);
1221                 PIN_SLP(gpm2-4, INPUT, DOWN);
1222
1223                 PIN_SLP(gpm3-0, PREV, NONE);
1224                 PIN_SLP(gpm3-1, PREV, NONE);
1225                 PIN_SLP(gpm3-2, PREV, NONE);
1226                 PIN_SLP(gpm3-3, OUT1, NONE);
1227                 PIN_SLP(gpm3-4, INPUT, DOWN);
1228                 PIN_SLP(gpm3-5, INPUT, DOWN);
1229                 PIN_SLP(gpm3-6, INPUT, DOWN);
1230                 PIN_SLP(gpm3-7, INPUT, DOWN);
1231
1232                 PIN_SLP(gpm4-0, INPUT, DOWN);
1233                 PIN_SLP(gpm4-1, INPUT, DOWN);
1234                 PIN_SLP(gpm4-2, INPUT, DOWN);
1235                 PIN_SLP(gpm4-3, INPUT, DOWN);
1236                 PIN_SLP(gpm4-4, INPUT, DOWN);
1237                 PIN_SLP(gpm4-5, INPUT, DOWN);
1238                 PIN_SLP(gpm4-6, INPUT, DOWN);
1239                 PIN_SLP(gpm4-7, INPUT, DOWN);
1240
1241                 PIN_SLP(gpy0-0, INPUT, DOWN);
1242                 PIN_SLP(gpy0-1, INPUT, DOWN);
1243                 PIN_SLP(gpy0-2, INPUT, DOWN);
1244                 PIN_SLP(gpy0-3, INPUT, DOWN);
1245                 PIN_SLP(gpy0-4, INPUT, DOWN);
1246                 PIN_SLP(gpy0-5, INPUT, DOWN);
1247
1248                 PIN_SLP(gpy1-0, INPUT, DOWN);
1249                 PIN_SLP(gpy1-1, INPUT, DOWN);
1250                 PIN_SLP(gpy1-2, INPUT, DOWN);
1251                 PIN_SLP(gpy1-3, INPUT, DOWN);
1252
1253                 PIN_SLP(gpy2-0, PREV, NONE);
1254                 PIN_SLP(gpy2-1, INPUT, DOWN);
1255                 PIN_SLP(gpy2-2, INPUT, NONE);
1256                 PIN_SLP(gpy2-3, INPUT, NONE);
1257                 PIN_SLP(gpy2-4, INPUT, NONE);
1258                 PIN_SLP(gpy2-5, INPUT, NONE);
1259
1260                 PIN_SLP(gpy3-0, INPUT, DOWN);
1261                 PIN_SLP(gpy3-1, INPUT, DOWN);
1262                 PIN_SLP(gpy3-2, INPUT, DOWN);
1263                 PIN_SLP(gpy3-3, INPUT, DOWN);
1264                 PIN_SLP(gpy3-4, INPUT, DOWN);
1265                 PIN_SLP(gpy3-5, INPUT, DOWN);
1266                 PIN_SLP(gpy3-6, INPUT, DOWN);
1267                 PIN_SLP(gpy3-7, INPUT, DOWN);
1268
1269                 PIN_SLP(gpy4-0, INPUT, DOWN);
1270                 PIN_SLP(gpy4-1, INPUT, DOWN);
1271                 PIN_SLP(gpy4-2, INPUT, DOWN);
1272                 PIN_SLP(gpy4-3, INPUT, DOWN);
1273                 PIN_SLP(gpy4-4, INPUT, DOWN);
1274                 PIN_SLP(gpy4-5, INPUT, DOWN);
1275                 PIN_SLP(gpy4-6, INPUT, DOWN);
1276                 PIN_SLP(gpy4-7, INPUT, DOWN);
1277
1278                 PIN_SLP(gpy5-0, INPUT, DOWN);
1279                 PIN_SLP(gpy5-1, INPUT, DOWN);
1280                 PIN_SLP(gpy5-2, INPUT, DOWN);
1281                 PIN_SLP(gpy5-3, INPUT, DOWN);
1282                 PIN_SLP(gpy5-4, INPUT, DOWN);
1283                 PIN_SLP(gpy5-5, INPUT, DOWN);
1284                 PIN_SLP(gpy5-6, INPUT, DOWN);
1285                 PIN_SLP(gpy5-7, INPUT, DOWN);
1286
1287                 PIN_SLP(gpy6-0, INPUT, DOWN);
1288                 PIN_SLP(gpy6-1, INPUT, DOWN);
1289                 PIN_SLP(gpy6-2, INPUT, DOWN);
1290                 PIN_SLP(gpy6-3, INPUT, DOWN);
1291                 PIN_SLP(gpy6-4, INPUT, DOWN);
1292                 PIN_SLP(gpy6-5, INPUT, DOWN);
1293                 PIN_SLP(gpy6-6, INPUT, DOWN);
1294                 PIN_SLP(gpy6-7, INPUT, DOWN);
1295         };
1296 };
1297
1298 &pinctrl_2 {
1299         pinctrl-names = "default";
1300         pinctrl-0 = <&sleep2>;
1301
1302         sleep2: sleep-states {
1303                 PIN_SLP(gpz-0, INPUT, DOWN);
1304                 PIN_SLP(gpz-1, INPUT, DOWN);
1305                 PIN_SLP(gpz-2, INPUT, DOWN);
1306                 PIN_SLP(gpz-3, INPUT, DOWN);
1307                 PIN_SLP(gpz-4, INPUT, DOWN);
1308                 PIN_SLP(gpz-5, INPUT, DOWN);
1309                 PIN_SLP(gpz-6, INPUT, DOWN);
1310         };
1311 };
1312
1313 &pinctrl_3 {
1314         pinctrl-names = "default";
1315         pinctrl-0 = <&sleep3>;
1316
1317         sleep3: sleep-states {
1318                 PIN_SLP(gpv0-0, INPUT, DOWN);
1319                 PIN_SLP(gpv0-1, INPUT, DOWN);
1320                 PIN_SLP(gpv0-2, INPUT, DOWN);
1321                 PIN_SLP(gpv0-3, INPUT, DOWN);
1322                 PIN_SLP(gpv0-4, INPUT, DOWN);
1323                 PIN_SLP(gpv0-5, INPUT, DOWN);
1324                 PIN_SLP(gpv0-6, INPUT, DOWN);
1325                 PIN_SLP(gpv0-7, INPUT, DOWN);
1326
1327                 PIN_SLP(gpv1-0, INPUT, DOWN);
1328                 PIN_SLP(gpv1-1, INPUT, DOWN);
1329                 PIN_SLP(gpv1-2, INPUT, DOWN);
1330                 PIN_SLP(gpv1-3, INPUT, DOWN);
1331                 PIN_SLP(gpv1-4, INPUT, DOWN);
1332                 PIN_SLP(gpv1-5, INPUT, DOWN);
1333                 PIN_SLP(gpv1-6, INPUT, DOWN);
1334                 PIN_SLP(gpv1-7, INPUT, DOWN);
1335
1336                 PIN_SLP(gpv2-0, INPUT, DOWN);
1337                 PIN_SLP(gpv2-1, INPUT, DOWN);
1338                 PIN_SLP(gpv2-2, INPUT, DOWN);
1339                 PIN_SLP(gpv2-3, INPUT, DOWN);
1340                 PIN_SLP(gpv2-4, INPUT, DOWN);
1341                 PIN_SLP(gpv2-5, INPUT, DOWN);
1342                 PIN_SLP(gpv2-6, INPUT, DOWN);
1343                 PIN_SLP(gpv2-7, INPUT, DOWN);
1344
1345                 PIN_SLP(gpv3-0, INPUT, DOWN);
1346                 PIN_SLP(gpv3-1, INPUT, DOWN);
1347                 PIN_SLP(gpv3-2, INPUT, DOWN);
1348                 PIN_SLP(gpv3-3, INPUT, DOWN);
1349                 PIN_SLP(gpv3-4, INPUT, DOWN);
1350                 PIN_SLP(gpv3-5, INPUT, DOWN);
1351                 PIN_SLP(gpv3-6, INPUT, DOWN);
1352                 PIN_SLP(gpv3-7, INPUT, DOWN);
1353
1354                 PIN_SLP(gpv4-0, INPUT, DOWN);
1355         };
1356 };
1357
1358 &pwm {
1359         pinctrl-0 = <&pwm0_out>;
1360         pinctrl-names = "default";
1361         samsung,pwm-outputs = <0>;
1362         status = "okay";
1363 };
1364
1365 &rtc {
1366         status = "okay";
1367         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1368         clock-names = "rtc", "rtc_src";
1369 };
1370
1371 &sdhci_2 {
1372         bus-width = <4>;
1373         cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1374         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1375         pinctrl-names = "default";
1376         vmmc-supply = <&ldo21_reg>;
1377         status = "okay";
1378 };
1379
1380 &sdhci_3 {
1381         #address-cells = <1>;
1382         #size-cells = <0>;
1383         non-removable;
1384         bus-width = <4>;
1385
1386         mmc-pwrseq = <&wlan_pwrseq>;
1387         pinctrl-names = "default";
1388         pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1389         status = "okay";
1390
1391         brcmf: wifi@1 {
1392                 reg = <1>;
1393                 compatible = "brcm,bcm4329-fmac";
1394                 interrupt-parent = <&gpx2>;
1395                 interrupts = <5 IRQ_TYPE_NONE>;
1396                 interrupt-names = "host-wake";
1397         };
1398 };
1399
1400 &serial_0 {
1401         pinctrl-0 = <&uart0_data &uart0_fctl>;
1402         pinctrl-names = "default";
1403         status = "okay";
1404
1405         bluetooth {
1406                 compatible = "brcm,bcm4330-bt";
1407                 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
1408                 pinctrl-names = "default";
1409                 max-speed = <3000000>;
1410                 shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
1411                 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
1412                 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
1413                 clocks = <&max77686 MAX77686_CLK_PMIC>;
1414         };
1415 };
1416
1417 &serial_1 {
1418         status = "okay";
1419 };
1420
1421 &serial_2 {
1422         status = "okay";
1423 };
1424
1425 &serial_3 {
1426         status = "okay";
1427 };
1428
1429 &spi_1 {
1430         pinctrl-names = "default";
1431         pinctrl-0 = <&spi1_bus>;
1432         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1433         status = "okay";
1434
1435         s5c73m3_spi: image-sensor@0 {
1436                 compatible = "samsung,s5c73m3";
1437                 spi-max-frequency = <50000000>;
1438                 reg = <0>;
1439                 controller-data {
1440                         samsung,spi-feedback-delay = <2>;
1441                 };
1442         };
1443 };
1444
1445 &tmu {
1446         vtmu-supply = <&ldo10_reg>;
1447         status = "okay";
1448 };