1 // SPDX-License-Identifier: GPL-2.0
3 * Google Peach Pit Rev 6+ board device tree source
5 * Copyright (c) 2014 Google, Inc
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/clock/maxim,max77802.h>
13 #include <dt-bindings/regulator/maxim,max77802.h>
14 #include <dt-bindings/sound/samsung-i2s.h>
15 #include "exynos5420.dtsi"
16 #include "exynos5420-cpus.dtsi"
19 model = "Google Peach Pit Rev 6+";
21 compatible = "google,pit-rev16",
22 "google,pit-rev15", "google,pit-rev14",
23 "google,pit-rev13", "google,pit-rev12",
24 "google,pit-rev11", "google,pit-rev10",
25 "google,pit-rev9", "google,pit-rev8",
26 "google,pit-rev7", "google,pit-rev6",
27 "google,pit", "google,peach","samsung,exynos5420",
31 /* Assign 20 so we don't get confused w/ builtin ones */
35 backlight: backlight {
36 compatible = "pwm-backlight";
37 pwms = <&pwm 0 1000000 0>;
38 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
39 default-brightness-level = <7>;
40 power-supply = <&tps65090_fet1>;
41 pinctrl-0 = <&pwm0_out>;
42 pinctrl-names = "default";
46 stdout-path = "serial3:115200n8";
51 compatible = "samsung,exynos5420-oscclk";
52 clock-frequency = <24000000>;
57 compatible = "gpio-keys";
59 pinctrl-names = "default";
60 pinctrl-0 = <&power_key_irq &lid_irq>;
64 gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_POWER>;
71 gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
72 linux,input-type = <5>; /* EV_SW */
73 linux,code = <0>; /* SW_LID */
74 debounce-interval = <1>;
80 device_type = "memory";
81 reg = <0x20000000 0x80000000>;
85 compatible = "google,snow-audio-max98090";
87 samsung,model = "Peach-Pit-I2S-MAX98090";
88 samsung,i2s-controller = <&i2s0>;
89 samsung,audio-codec = <&max98090>;
92 sound-dai = <&i2s0 0>;
96 sound-dai = <&max98090>, <&hdmi>;
100 usb300_vbus_reg: regulator-usb300 {
101 compatible = "regulator-fixed";
102 regulator-name = "P5.0V_USB3CON0";
103 regulator-min-microvolt = <5000000>;
104 regulator-max-microvolt = <5000000>;
105 gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
106 pinctrl-names = "default";
107 pinctrl-0 = <&usb300_vbus_en>;
111 usb301_vbus_reg: regulator-usb301 {
112 compatible = "regulator-fixed";
113 regulator-name = "P5.0V_USB3CON1";
114 regulator-min-microvolt = <5000000>;
115 regulator-max-microvolt = <5000000>;
116 gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
117 pinctrl-names = "default";
118 pinctrl-0 = <&usb301_vbus_en>;
122 vbat: fixed-regulator {
123 compatible = "regulator-fixed";
124 regulator-name = "vbat-supply";
130 compatible = "auo,b116xw03";
131 power-supply = <&tps65090_fet6>;
132 backlight = <&backlight>;
136 remote-endpoint = <&bridge_out>;
141 mmc1_pwrseq: mmc1-pwrseq {
142 compatible = "mmc-pwrseq-simple";
143 reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
144 clocks = <&max77802 MAX77802_CLK_32K_CP>;
145 clock-names = "ext_clock";
151 vdd-supply = <&ldo9_reg>;
155 assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
156 assigned-clock-parents = <&clock CLK_MAU_EPLL>;
160 cpu-supply = <&buck2_reg>;
164 cpu-supply = <&buck6_reg>;
169 pinctrl-names = "default";
170 pinctrl-0 = <&dp_hpd_gpio>;
171 samsung,color-space = <0>;
172 samsung,color-depth = <1>;
173 samsung,link-rate = <0x06>;
174 samsung,lane-count = <2>;
175 hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
180 remote-endpoint = <&bridge_in>;
193 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&hdmi_hpd_irq>;
198 hdmi-en-supply = <&tps65090_fet7>;
199 vdd-supply = <&ldo8_reg>;
200 vdd_osc-supply = <&ldo10_reg>;
201 vdd_pll-supply = <&ldo8_reg>;
206 clock-frequency = <400000>;
209 compatible = "maxim,max77802";
210 interrupt-parent = <&gpx3>;
211 interrupts = <1 IRQ_TYPE_NONE>;
212 pinctrl-names = "default";
213 pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
214 <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
219 inb1-supply = <&tps65090_dcdc2>;
220 inb2-supply = <&tps65090_dcdc1>;
221 inb3-supply = <&tps65090_dcdc2>;
222 inb4-supply = <&tps65090_dcdc2>;
223 inb5-supply = <&tps65090_dcdc1>;
224 inb6-supply = <&tps65090_dcdc2>;
225 inb7-supply = <&tps65090_dcdc1>;
226 inb8-supply = <&tps65090_dcdc1>;
227 inb9-supply = <&tps65090_dcdc1>;
228 inb10-supply = <&tps65090_dcdc1>;
230 inl1-supply = <&buck5_reg>;
231 inl2-supply = <&buck7_reg>;
232 inl3-supply = <&buck9_reg>;
233 inl4-supply = <&buck9_reg>;
234 inl5-supply = <&buck9_reg>;
235 inl6-supply = <&tps65090_dcdc2>;
236 inl7-supply = <&buck9_reg>;
237 inl9-supply = <&tps65090_dcdc2>;
238 inl10-supply = <&buck7_reg>;
242 regulator-name = "vdd_mif";
243 regulator-min-microvolt = <800000>;
244 regulator-max-microvolt = <1300000>;
247 regulator-ramp-delay = <12500>;
248 regulator-state-mem {
249 regulator-off-in-suspend;
254 regulator-name = "vdd_arm";
255 regulator-min-microvolt = <800000>;
256 regulator-max-microvolt = <1500000>;
259 regulator-ramp-delay = <12500>;
260 regulator-state-mem {
261 regulator-off-in-suspend;
266 regulator-name = "vdd_int";
267 regulator-min-microvolt = <800000>;
268 regulator-max-microvolt = <1400000>;
271 regulator-ramp-delay = <12500>;
272 regulator-state-mem {
273 regulator-off-in-suspend;
278 regulator-name = "vdd_g3d";
279 regulator-min-microvolt = <700000>;
280 regulator-max-microvolt = <1400000>;
283 regulator-ramp-delay = <12500>;
284 regulator-state-mem {
285 regulator-off-in-suspend;
290 regulator-name = "vdd_1v2";
291 regulator-min-microvolt = <1200000>;
292 regulator-max-microvolt = <1200000>;
294 regulator-state-mem {
295 regulator-off-in-suspend;
300 regulator-name = "vdd_kfc";
301 regulator-min-microvolt = <800000>;
302 regulator-max-microvolt = <1500000>;
305 regulator-ramp-delay = <12500>;
306 regulator-state-mem {
307 regulator-off-in-suspend;
312 regulator-name = "vdd_1v35";
313 regulator-min-microvolt = <1350000>;
314 regulator-max-microvolt = <1350000>;
317 regulator-state-mem {
318 regulator-on-in-suspend;
323 regulator-name = "vdd_emmc";
324 regulator-min-microvolt = <2850000>;
325 regulator-max-microvolt = <2850000>;
328 regulator-state-mem {
329 regulator-off-in-suspend;
334 regulator-name = "vdd_2v";
335 regulator-min-microvolt = <2000000>;
336 regulator-max-microvolt = <2000000>;
339 regulator-state-mem {
340 regulator-on-in-suspend;
345 regulator-name = "vdd_1v8";
346 regulator-min-microvolt = <1800000>;
347 regulator-max-microvolt = <1800000>;
350 regulator-state-mem {
351 regulator-on-in-suspend;
356 regulator-name = "vdd_1v0";
357 regulator-min-microvolt = <1000000>;
358 regulator-max-microvolt = <1000000>;
360 regulator-state-mem {
361 regulator-on-in-suspend;
362 regulator-mode = <MAX77802_OPMODE_LP>;
367 regulator-name = "vdd_1v2_2";
368 regulator-min-microvolt = <1200000>;
369 regulator-max-microvolt = <1200000>;
373 regulator-name = "vdd_1v8_3";
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <1800000>;
377 regulator-state-mem {
378 regulator-on-in-suspend;
379 regulator-mode = <MAX77802_OPMODE_LP>;
383 vqmmc_sdcard: ldo4_reg: LDO4 {
384 regulator-name = "vdd_sd";
385 regulator-min-microvolt = <1800000>;
386 regulator-max-microvolt = <2800000>;
388 regulator-state-mem {
389 regulator-off-in-suspend;
394 regulator-name = "vdd_1v8_5";
395 regulator-min-microvolt = <1800000>;
396 regulator-max-microvolt = <1800000>;
398 regulator-state-mem {
399 regulator-off-in-suspend;
404 regulator-name = "vdd_1v8_6";
405 regulator-min-microvolt = <1800000>;
406 regulator-max-microvolt = <1800000>;
408 regulator-state-mem {
409 regulator-off-in-suspend;
414 regulator-name = "vdd_1v8_7";
415 regulator-min-microvolt = <1800000>;
416 regulator-max-microvolt = <1800000>;
420 regulator-name = "vdd_ldo8";
421 regulator-min-microvolt = <1000000>;
422 regulator-max-microvolt = <1000000>;
424 regulator-state-mem {
425 regulator-off-in-suspend;
430 regulator-name = "vdd_ldo9";
431 regulator-min-microvolt = <1800000>;
432 regulator-max-microvolt = <1800000>;
433 regulator-state-mem {
434 regulator-on-in-suspend;
435 regulator-mode = <MAX77802_OPMODE_LP>;
440 regulator-name = "vdd_ldo10";
441 regulator-min-microvolt = <1800000>;
442 regulator-max-microvolt = <1800000>;
444 regulator-state-mem {
445 regulator-off-in-suspend;
450 regulator-name = "vdd_ldo11";
451 regulator-min-microvolt = <1800000>;
452 regulator-max-microvolt = <1800000>;
454 regulator-state-mem {
455 regulator-on-in-suspend;
456 regulator-mode = <MAX77802_OPMODE_LP>;
461 regulator-name = "vdd_ldo12";
462 regulator-min-microvolt = <3000000>;
463 regulator-max-microvolt = <3000000>;
465 regulator-state-mem {
466 regulator-off-in-suspend;
471 regulator-name = "vdd_ldo13";
472 regulator-min-microvolt = <1800000>;
473 regulator-max-microvolt = <1800000>;
475 regulator-state-mem {
476 regulator-on-in-suspend;
477 regulator-mode = <MAX77802_OPMODE_LP>;
482 regulator-name = "vdd_ldo14";
483 regulator-min-microvolt = <1800000>;
484 regulator-max-microvolt = <1800000>;
486 regulator-state-mem {
487 regulator-off-in-suspend;
492 regulator-name = "vdd_ldo15";
493 regulator-min-microvolt = <1000000>;
494 regulator-max-microvolt = <1000000>;
496 regulator-state-mem {
497 regulator-off-in-suspend;
502 regulator-name = "vdd_g3ds";
503 regulator-min-microvolt = <900000>;
504 regulator-max-microvolt = <1400000>;
506 regulator-state-mem {
507 regulator-off-in-suspend;
512 regulator-name = "ldo_18";
513 regulator-min-microvolt = <1800000>;
514 regulator-max-microvolt = <1800000>;
518 regulator-name = "ldo_19";
519 regulator-min-microvolt = <1800000>;
520 regulator-max-microvolt = <1800000>;
524 regulator-name = "ldo_20";
525 regulator-min-microvolt = <1800000>;
526 regulator-max-microvolt = <1800000>;
531 regulator-name = "ldo_21";
532 regulator-min-microvolt = <2800000>;
533 regulator-max-microvolt = <2800000>;
537 regulator-name = "ldo_23";
538 regulator-min-microvolt = <3300000>;
539 regulator-max-microvolt = <3300000>;
542 regulator-name = "ldo_24";
543 regulator-min-microvolt = <2800000>;
544 regulator-max-microvolt = <2800000>;
548 regulator-name = "ldo_25";
549 regulator-min-microvolt = <3300000>;
550 regulator-max-microvolt = <3300000>;
554 regulator-name = "ldo_26";
555 regulator-min-microvolt = <1200000>;
556 regulator-max-microvolt = <1200000>;
560 regulator-name = "ldo_27";
561 regulator-min-microvolt = <1200000>;
562 regulator-max-microvolt = <1200000>;
566 regulator-name = "ldo_28";
567 regulator-min-microvolt = <1800000>;
568 regulator-max-microvolt = <1800000>;
572 regulator-name = "ldo_29";
573 regulator-min-microvolt = <1800000>;
574 regulator-max-microvolt = <1800000>;
578 regulator-name = "vdd_mifs";
579 regulator-min-microvolt = <1000000>;
580 regulator-max-microvolt = <1000000>;
582 regulator-state-mem {
583 regulator-off-in-suspend;
588 regulator-name = "ldo_32";
589 regulator-min-microvolt = <3000000>;
590 regulator-max-microvolt = <3000000>;
594 regulator-name = "ldo_33";
595 regulator-min-microvolt = <2800000>;
596 regulator-max-microvolt = <2800000>;
600 regulator-name = "ldo_34";
601 regulator-min-microvolt = <3000000>;
602 regulator-max-microvolt = <3000000>;
606 regulator-name = "ldo_35";
607 regulator-min-microvolt = <1200000>;
608 regulator-max-microvolt = <1200000>;
616 clock-frequency = <400000>;
618 max98090: audio-codec@10 {
619 compatible = "maxim,max98090";
621 interrupts = <2 IRQ_TYPE_NONE>;
622 interrupt-parent = <&gpx0>;
623 pinctrl-names = "default";
624 pinctrl-0 = <&max98090_irq>;
625 clocks = <&pmu_system_controller 0>;
626 clock-names = "mclk";
627 #sound-dai-cells = <0>;
631 compatible = "isil,isl29018";
633 vcc-supply = <&tps65090_fet5>;
636 ps8625: lvds-bridge@48 {
637 compatible = "parade,ps8625";
639 sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
640 reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
645 #address-cells = <1>;
651 bridge_out: endpoint {
652 remote-endpoint = <&panel_in>;
659 bridge_in: endpoint {
660 remote-endpoint = <&dp_out>;
670 clock-frequency = <333000>;
674 compatible = "atmel,maxtouch";
676 interrupt-parent = <&gpx1>;
677 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
679 pinctrl-names = "default";
680 pinctrl-0 = <&trackpad_irq>;
681 linux,gpio-keymap = <KEY_RESERVED
683 KEY_RESERVED /* GPIO0 */
684 KEY_RESERVED /* GPIO1 */
685 KEY_RESERVED /* GPIO2 */
686 BTN_LEFT>; /* GPIO3 */
692 clock-frequency = <400000>;
695 compatible = "infineon,slb9645tt";
698 /* Unused irq; but still need to configure the pins */
699 pinctrl-names = "default";
700 pinctrl-0 = <&tpm_irq>;
706 samsung,i2c-sda-delay = <100>;
707 samsung,i2c-max-bus-freq = <66000>;
708 samsung,i2c-slave-addr = <0x50>;
712 assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
713 assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
727 clock-frequency = <400000000>;
728 samsung,dw-mshc-ciu-div = <3>;
729 samsung,dw-mshc-sdr-timing = <0 4>;
730 samsung,dw-mshc-ddr-timing = <0 2>;
731 samsung,dw-mshc-hs400-timing = <0 2>;
732 samsung,read-strobe-delay = <90>;
733 pinctrl-names = "default";
734 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
738 /* WiFi SDIO module */
743 keep-power-in-suspend;
744 clock-frequency = <400000000>;
745 samsung,dw-mshc-ciu-div = <1>;
746 samsung,dw-mshc-sdr-timing = <0 1>;
747 samsung,dw-mshc-ddr-timing = <0 2>;
748 pinctrl-names = "default";
749 pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
750 <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
753 mmc-pwrseq = <&mmc1_pwrseq>;
754 vqmmc-supply = <&buck10_reg>;
761 card-detect-delay = <200>;
762 clock-frequency = <400000000>;
763 samsung,dw-mshc-ciu-div = <3>;
764 samsung,dw-mshc-sdr-timing = <2 3>;
765 samsung,dw-mshc-ddr-timing = <1 2>;
766 pinctrl-names = "default";
767 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
773 pinctrl-names = "default";
774 pinctrl-0 = <&mask_tpm_reset>;
777 samsung,pins = "gpx0-0";
778 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
779 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
780 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
783 max98090_irq: max98090-irq {
784 samsung,pins = "gpx0-2";
785 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
786 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
787 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
790 /* We need GPX0_6 to be low at sleep time; just keep it low always */
791 mask_tpm_reset: mask-tpm-reset {
792 samsung,pins = "gpx0-6";
793 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
794 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
795 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
796 samsung,pin-val = <0>;
800 samsung,pins = "gpx1-0";
801 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
802 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
803 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
806 trackpad_irq: trackpad-irq {
807 samsung,pins = "gpx1-1";
808 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
809 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
810 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
813 power_key_irq: power-key-irq {
814 samsung,pins = "gpx1-2";
815 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
816 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
817 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
821 samsung,pins = "gpx1-5";
822 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
823 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
824 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
827 tps65090_irq: tps65090-irq {
828 samsung,pins = "gpx2-5";
829 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
830 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
831 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
834 dp_hpd_gpio: dp_hpd_gpio {
835 samsung,pins = "gpx2-6";
836 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
837 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
838 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
841 max77802_irq: max77802-irq {
842 samsung,pins = "gpx3-1";
843 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
844 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
845 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
849 samsung,pins = "gpx3-4";
850 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
851 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
852 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
855 hdmi_hpd_irq: hdmi-hpd-irq {
856 samsung,pins = "gpx3-7";
857 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
858 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
859 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
862 pmic_dvs_1: pmic-dvs-1 {
863 samsung,pins = "gpy7-6";
864 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
865 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
866 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
871 /* Adjust WiFi drive strengths lower for EMI */
873 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
877 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
880 sd1_bus1: sd1-bus-width1 {
881 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
884 sd1_bus4: sd1-bus-width4 {
885 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
888 sd1_bus8: sd1-bus-width8 {
889 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
894 pmic_dvs_2: pmic-dvs-2 {
895 samsung,pins = "gpj4-2";
896 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
897 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
898 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
901 pmic_dvs_3: pmic-dvs-3 {
902 samsung,pins = "gpj4-3";
903 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
904 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
905 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
910 /* Drive SPI lines at x2 for better integrity */
912 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
915 /* Drive SPI chip select at x2 for better integrity */
916 ec_spi_cs: ec-spi-cs {
917 samsung,pins = "gpb1-2";
918 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
919 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
920 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
923 usb300_vbus_en: usb300-vbus-en {
924 samsung,pins = "gph0-0";
925 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
926 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
927 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
930 usb301_vbus_en: usb301-vbus-en {
931 samsung,pins = "gph0-1";
932 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
933 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
934 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
937 pmic_selb: pmic-selb {
938 samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
940 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
941 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
942 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
946 &pmu_system_controller {
947 assigned-clocks = <&pmu_system_controller 0>;
948 assigned-clock-parents = <&clock CLK_FIN_PLL>;
953 clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
954 clock-names = "rtc", "rtc_src";
960 samsung,spi-src-clk = <0>;
961 cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
964 compatible = "google,cros-ec-spi";
965 interrupt-parent = <&gpx1>;
966 interrupts = <5 IRQ_TYPE_NONE>;
967 pinctrl-names = "default";
968 pinctrl-0 = <&ec_spi_cs &ec_irq>;
970 spi-max-frequency = <3125000>;
971 google,has-vbc-nvram;
974 samsung,spi-feedback-delay = <1>;
977 i2c_tunnel: i2c-tunnel {
978 compatible = "google,cros-ec-i2c-tunnel";
979 #address-cells = <1>;
981 google,remote-bus = <0>;
983 battery: sbs-battery@b {
984 compatible = "sbs,sbs-battery";
986 sbs,poll-retry-count = <1>;
987 sbs,i2c-retry-count = <2>;
991 compatible = "ti,tps65090";
995 * Config irq to disable internal pulls
996 * even though we run in polling mode.
998 pinctrl-names = "default";
999 pinctrl-0 = <&tps65090_irq>;
1001 vsys1-supply = <&vbat>;
1002 vsys2-supply = <&vbat>;
1003 vsys3-supply = <&vbat>;
1004 infet1-supply = <&vbat>;
1005 infet2-supply = <&tps65090_dcdc1>;
1006 infet3-supply = <&tps65090_dcdc2>;
1007 infet4-supply = <&tps65090_dcdc2>;
1008 infet5-supply = <&tps65090_dcdc2>;
1009 infet6-supply = <&tps65090_dcdc2>;
1010 infet7-supply = <&tps65090_dcdc1>;
1011 vsys-l1-supply = <&vbat>;
1012 vsys-l2-supply = <&vbat>;
1015 tps65090_dcdc1: dcdc1 {
1016 ti,enable-ext-control;
1018 tps65090_dcdc2: dcdc2 {
1019 ti,enable-ext-control;
1021 tps65090_dcdc3: dcdc3 {
1022 ti,enable-ext-control;
1024 tps65090_fet1: fet1 {
1025 regulator-name = "vcd_led";
1027 tps65090_fet2: fet2 {
1028 regulator-name = "video_mid";
1029 regulator-always-on;
1031 tps65090_fet3: fet3 {
1032 regulator-name = "wwan_r";
1033 regulator-always-on;
1035 tps65090_fet4: fet4 {
1036 regulator-name = "sdcard";
1037 regulator-always-on;
1039 tps65090_fet5: fet5 {
1040 regulator-name = "camout";
1041 regulator-always-on;
1043 tps65090_fet6: fet6 {
1044 regulator-name = "lcd_vdd";
1046 tps65090_fet7: fet7 {
1047 regulator-name = "video_mid_1a";
1048 regulator-always-on;
1050 tps65090_ldo1: ldo1 {
1052 tps65090_ldo2: ldo2 {
1057 compatible = "ti,tps65090-charger";
1069 arm,cpu-registers-not-fw-configured;
1073 vtmu-supply = <&ldo10_reg>;
1077 vtmu-supply = <&ldo10_reg>;
1081 vtmu-supply = <&ldo10_reg>;
1085 vtmu-supply = <&ldo10_reg>;
1089 vtmu-supply = <&ldo10_reg>;
1101 vbus-supply = <&usb300_vbus_reg>;
1105 vbus-supply = <&usb301_vbus_reg>;
1109 * Use longest HW watchdog in SoC (32 seconds) since the hardware
1110 * watchdog provides no debugging information (compared to soft/hard
1111 * lockup detectors) and so should be last resort.
1117 #include "cros-ec-keyboard.dtsi"
1118 #include "cros-adc-thermistors.dtsi"