WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / boot / dts / imx53-cx9020.dts
blobcfb18849a92b4e249b1123cec4e295e5260d3185
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright 2017 Beckhoff Automation GmbH & Co. KG
4  * based on imx53-qsb.dts
5  */
7 /dts-v1/;
8 #include "imx53.dtsi"
10 / {
11         model = "Beckhoff CX9020 Embedded PC";
12         compatible = "bhf,cx9020", "fsl,imx53";
14         chosen {
15                 stdout-path = &uart2;
16         };
18         memory@70000000 {
19                 device_type = "memory";
20                 reg = <0x70000000 0x20000000>,
21                       <0xb0000000 0x20000000>;
22         };
24         display-0 {
25                 #address-cells =<1>;
26                 #size-cells = <0>;
27                 compatible = "fsl,imx-parallel-display";
28                 interface-pix-fmt = "rgb24";
29                 pinctrl-names = "default";
30                 pinctrl-0 = <&pinctrl_ipu_disp0>;
32                 port@0 {
33                         reg = <0>;
35                         display0_in: endpoint {
36                                 remote-endpoint = <&ipu_di0_disp0>;
37                         };
38                 };
40                 port@1 {
41                         reg = <1>;
43                         display0_out: endpoint {
44                                 remote-endpoint = <&tfp410_in>;
45                         };
46                 };
47         };
49         dvi-connector {
50                 compatible = "dvi-connector";
51                 ddc-i2c-bus = <&i2c2>;
52                 digital;
54                 port {
55                         dvi_connector_in: endpoint {
56                                 remote-endpoint = <&tfp410_out>;
57                         };
58                 };
59         };
61         dvi-converter {
62                 compatible = "ti,tfp410";
64                 ports {
65                         #address-cells = <1>;
66                         #size-cells = <0>;
68                         port@0 {
69                                 reg = <0>;
71                                 tfp410_in: endpoint {
72                                         remote-endpoint = <&display0_out>;
73                                 };
74                         };
76                         port@1 {
77                                 reg = <1>;
79                                 tfp410_out: endpoint {
80                                         remote-endpoint = <&dvi_connector_in>;
81                                 };
82                         };
83                 };
84         };
86         leds {
87                 compatible = "gpio-leds";
89                 pwr-r {
90                         gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
91                         default-state = "off";
92                 };
94                 pwr-g {
95                         gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
96                         default-state = "on";
97                 };
99                 pwr-b {
100                         gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
101                         default-state = "off";
102                 };
104                 sd1-b {
105                         linux,default-trigger = "mmc0";
106                         gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
107                 };
109                 sd2-b {
110                         linux,default-trigger = "mmc1";
111                         gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
112                 };
113         };
115         regulator-3p2v {
116                 compatible = "regulator-fixed";
117                 regulator-name = "3P2V";
118                 regulator-min-microvolt = <3200000>;
119                 regulator-max-microvolt = <3200000>;
120                 regulator-always-on;
121         };
123         reg_usb_vbus: regulator-vbus {
124                 compatible = "regulator-fixed";
125                 regulator-name = "usb_vbus";
126                 regulator-min-microvolt = <5000000>;
127                 regulator-max-microvolt = <5000000>;
128                 gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
129                 enable-active-high;
130         };
133 &esdhc1 {
134         pinctrl-names = "default";
135         pinctrl-0 = <&pinctrl_esdhc1>;
136         cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
137         bus-width = <4>;
138         status = "okay";
141 &esdhc2 {
142         pinctrl-names = "default";
143         pinctrl-0 = <&pinctrl_esdhc2>;
144         cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
145         bus-width = <4>;
146         status = "okay";
149 &fec {
150         pinctrl-names = "default";
151         pinctrl-0 = <&pinctrl_fec>;
152         phy-mode = "rmii";
153         phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
154         status = "okay";
157 &i2c2 {
158         pinctrl-names = "default";
159         pinctrl-0 = <&pinctrl_i2c2>;
160         status = "okay";
163 &ipu_di0_disp0 {
164         remote-endpoint = <&display0_in>;
167 &uart2 {
168         pinctrl-names = "default";
169         pinctrl-0 = <&pinctrl_uart2>;
170         fsl,dte-mode;
171         status = "okay";
174 &usbh1 {
175         vbus-supply = <&reg_usb_vbus>;
176         phy_type = "utmi";
177         status = "okay";
180 &usbotg {
181         dr_mode = "peripheral";
182         status = "okay";
185 &vpu {
186         status = "okay";
189 &iomuxc {
190         pinctrl-names = "default";
191         pinctrl-0 = <&pinctrl_hog>;
193         pinctrl_hog: hoggrp {
194                 fsl,pins = <
195                         MX53_PAD_GPIO_0__CCM_CLKO               0x1c4
196                         MX53_PAD_GPIO_16__I2C3_SDA              0x1c4
197                         MX53_PAD_EIM_D22__GPIO3_22              0x1c4
198                         MX53_PAD_EIM_D23__GPIO3_23              0x1e4
199                         MX53_PAD_EIM_D24__GPIO3_24              0x1e4
200                 >;
201         };
203         pinctrl_esdhc1: esdhc1grp {
204                 fsl,pins = <
205                         MX53_PAD_SD1_DATA0__ESDHC1_DAT0         0x1d5
206                         MX53_PAD_SD1_DATA1__ESDHC1_DAT1         0x1d5
207                         MX53_PAD_SD1_DATA2__ESDHC1_DAT2         0x1d5
208                         MX53_PAD_SD1_DATA3__ESDHC1_DAT3         0x1d5
209                         MX53_PAD_SD1_CMD__ESDHC1_CMD            0x1d5
210                         MX53_PAD_SD1_CLK__ESDHC1_CLK            0x1d5
211                         MX53_PAD_GPIO_1__ESDHC1_CD              0x1c4
212                         MX53_PAD_EIM_D17__GPIO3_17              0x1e4
213                         MX53_PAD_GPIO_3__GPIO1_3                0x1c4
214                 >;
215         };
217         pinctrl_esdhc2: esdhc2grp {
218                 fsl,pins = <
219                         MX53_PAD_SD2_DATA0__ESDHC2_DAT0         0x1d5
220                         MX53_PAD_SD2_DATA1__ESDHC2_DAT1         0x1d5
221                         MX53_PAD_SD2_DATA2__ESDHC2_DAT2         0x1d5
222                         MX53_PAD_SD2_DATA3__ESDHC2_DAT3         0x1d5
223                         MX53_PAD_SD2_CMD__ESDHC2_CMD            0x1d5
224                         MX53_PAD_SD2_CLK__ESDHC2_CLK            0x1d5
225                         MX53_PAD_GPIO_4__ESDHC2_CD              0x1e4
226                         MX53_PAD_EIM_D20__GPIO3_20              0x1e4
227                         MX53_PAD_GPIO_8__GPIO1_8                0x1c4
228                 >;
229         };
231         pinctrl_fec: fecgrp {
232                 fsl,pins = <
233                         MX53_PAD_FEC_MDC__FEC_MDC               0x4
234                         MX53_PAD_FEC_MDIO__FEC_MDIO             0x1fc
235                         MX53_PAD_FEC_REF_CLK__FEC_TX_CLK        0x180
236                         MX53_PAD_FEC_RX_ER__FEC_RX_ER           0x180
237                         MX53_PAD_FEC_CRS_DV__FEC_RX_DV          0x180
238                         MX53_PAD_FEC_RXD1__FEC_RDATA_1          0x180
239                         MX53_PAD_FEC_RXD0__FEC_RDATA_0          0x180
240                         MX53_PAD_FEC_TX_EN__FEC_TX_EN           0x4
241                         MX53_PAD_FEC_TXD1__FEC_TDATA_1          0x4
242                         MX53_PAD_FEC_TXD0__FEC_TDATA_0          0x4
243                 >;
244         };
246         pinctrl_i2c2: i2c2grp {
247                 fsl,pins = <
248                         MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
249                         MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
250                 >;
251         };
253         pinctrl_ipu_disp0: ipudisp0grp {
254                 fsl,pins = <
255                         MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
256                         MX53_PAD_DI0_PIN15__IPU_DI0_PIN15       0x5
257                         MX53_PAD_DI0_PIN2__IPU_DI0_PIN2         0x5
258                         MX53_PAD_DI0_PIN3__IPU_DI0_PIN3         0x5
259                         MX53_PAD_DI0_PIN4__IPU_DI0_PIN4         0x5
260                         MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0    0x5
261                         MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1    0x5
262                         MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2    0x5
263                         MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3    0x5
264                         MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4    0x5
265                         MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5    0x5
266                         MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6    0x5
267                         MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7    0x5
268                         MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8    0x5
269                         MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9    0x5
270                         MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10  0x5
271                         MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11  0x5
272                         MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12  0x5
273                         MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13  0x5
274                         MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14  0x5
275                         MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15  0x5
276                         MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16  0x5
277                         MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17  0x5
278                         MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18  0x5
279                         MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19  0x5
280                         MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20  0x5
281                         MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21  0x5
282                         MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22  0x5
283                         MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23  0x5
284                 >;
285         };
287         pinctrl_uart2: uart2grp {
288                 fsl,pins = <
289                         MX53_PAD_EIM_D26__UART2_RXD_MUX 0x1e4
290                         MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
291                         MX53_PAD_EIM_D28__UART2_RTS 0x1e4
292                         MX53_PAD_EIM_D29__UART2_CTS 0x1e4
293                 >;
294         };