1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright (C) 2013 Marek Vasut <marex@denx.de>
7 #include "imx53-m53.dtsi"
10 model = "Aries/DENX M53EVK";
11 compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
14 compatible = "fsl,imx-parallel-display";
15 interface-pix-fmt = "bgr666";
16 pinctrl-names = "default";
17 pinctrl-0 = <&pinctrl_ipu_disp1>;
22 clock-frequency = <31500000>;
36 display1_in: endpoint {
37 remote-endpoint = <&ipu_di1_disp1>;
43 compatible = "pwm-backlight";
44 pwms = <&pwm1 0 3000>;
45 brightness-levels = <0 4 8 16 32 64 128 255>;
46 default-brightness-level = <6>;
47 power-supply = <®_backlight>;
51 compatible = "gpio-leds";
52 pinctrl-names = "default";
53 pinctrl-0 = <&led_pin_gpio>;
58 linux,default-trigger = "heartbeat";
64 linux,default-trigger = "heartbeat";
69 compatible = "simple-bus";
73 reg_usbh1_vbus: regulator@3 {
74 compatible = "regulator-fixed";
76 regulator-name = "vbus";
77 regulator-min-microvolt = <5000000>;
78 regulator-max-microvolt = <5000000>;
82 reg_usb_otg_vbus: regulator@4 {
83 compatible = "regulator-fixed";
85 regulator-name = "usb_otg_vbus";
86 regulator-min-microvolt = <5000000>;
87 regulator-max-microvolt = <5000000>;
93 compatible = "fsl,imx53-m53evk-sgtl5000",
94 "fsl,imx-audio-sgtl5000";
95 model = "imx53-m53evk-sgtl5000";
96 ssi-controller = <&ssi2>;
97 audio-codec = <&sgtl5000>;
100 "Mic Jack", "Mic Bias",
101 "LINE_IN", "Line In Jack",
102 "Headphone Jack", "HP_OUT",
103 "Ext Spk", "LINE_OUT";
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_audmux>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&pinctrl_can1>;
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_can2>;
128 pinctrl-names = "default";
129 pinctrl-0 = <&pinctrl_esdhc1>;
130 cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
131 wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&pinctrl_fec>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&pinctrl_i2c1>;
148 compatible = "fsl,sgtl5000";
150 #sound-dai-cells = <0>;
151 VDDA-supply = <®_3p2v>;
152 VDDIO-supply = <®_3p2v>;
153 clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
158 pinctrl-names = "default";
159 pinctrl-0 = <&pinctrl_i2c3>;
164 pinctrl-names = "default";
165 pinctrl-0 = <&pinctrl_hog>;
168 pinctrl_usb: usbgrp {
170 MX53_PAD_GPIO_2__GPIO1_2 0x80000000
171 MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000
175 pinctrl_usbotg: usbotggrp {
177 MX53_PAD_GPIO_4__GPIO1_4 0x000b0
181 led_pin_gpio: led_gpio {
183 MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
184 MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000
188 pinctrl_audmux: audmuxgrp {
190 MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000
191 MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000
192 MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000
193 MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000
197 pinctrl_can1: can1grp {
199 MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
200 MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
204 pinctrl_can2: can2grp {
206 MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
207 MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
211 pinctrl_esdhc1: esdhc1grp {
213 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
214 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
215 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
216 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
217 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
218 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
222 pinctrl_fec: fecgrp {
224 MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
225 MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
226 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
227 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
228 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
229 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
230 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
231 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
232 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
233 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
237 pinctrl_i2c1: i2c1grp {
239 MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
240 MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
244 pinctrl_i2c3: i2c3grp {
246 MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
247 MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
251 pinctrl_ipu_disp1: ipudisp1grp {
253 MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5
254 MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5
255 MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5
256 MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5
257 MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5
258 MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5
259 MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5
260 MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5
261 MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5
262 MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5
263 MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5
264 MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5
265 MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5
266 MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5
267 MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5
268 MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5
269 MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5
270 MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5
271 MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5
272 MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5
273 MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5
274 MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5
275 MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5
276 MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5
277 MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5
278 MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5
279 MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5
280 MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5
281 MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5
282 MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5
283 MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5
284 MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5
288 pinctrl_pwm1: pwm1grp {
290 MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
294 pinctrl_uart1: uart1grp {
296 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
297 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
301 pinctrl_uart2: uart2grp {
303 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
304 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
308 pinctrl_uart3: uart3grp {
310 MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
311 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
312 MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
313 MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
320 remote-endpoint = <&display1_in>;
325 pinctrl-names = "default";
326 pinctrl-0 = <&pinctrl_pwm1>;
339 pinctrl-names = "default";
340 pinctrl-0 = <&pinctrl_uart1>;
345 pinctrl-names = "default";
346 pinctrl-0 = <&pinctrl_uart2>;
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_uart3>;
357 pinctrl-names = "default";
358 pinctrl-0 = <&pinctrl_usb>;
359 vbus-supply = <®_usbh1_vbus>;
365 pinctrl-names = "default";
366 pinctrl-0 = <&pinctrl_usbotg>;
368 vbus-supply = <®_usb_otg_vbus>;
369 disable-over-current;