| blob | be040b6a02fa8d645e7440228785689527014347 |
1 /*
2 * Copyright 2014 General Electric Company
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
12 *
13 * This file is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * Or, alternatively,
19 *
20 * b) Permission is hereby granted, free of charge, to any person
21 * obtaining a copy of this software and associated documentation
22 * files (the "Software"), to deal in the Software without
23 * restriction, including without limitation the rights to use,
24 * copy, modify, merge, publish, distribute, sublicense, and/or
25 * sell copies of the Software, and to permit persons to whom the
26 * Software is furnished to do so, subject to the following
27 * conditions:
28 *
29 * The above copyright notice and this permission notice shall be
30 * included in all copies or substantial portions of the Software.
31 *
32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
39 * OTHER DEALINGS IN THE SOFTWARE.
40 */
42 /dts-v1/;
44 #include "imx53.dtsi"
45 #include <dt-bindings/input/input.h>
47 / {
48 model = "General Electric CS ONE";
49 compatible = "ge,imx53-cpuvo", "fsl,imx53";
51 aliases {
52 spi0 = &cspi;
53 spi1 = &ecspi1;
54 spi2 = &ecspi2;
55 };
57 chosen {
58 stdout-path = "serial0:115200n8";
59 };
61 memory@70000000 {
62 device_type = "memory";
63 reg = <0x70000000 0x20000000>,
64 <0xb0000000 0x20000000>;
65 };
67 cko2_11M: sgtl-clock-cko2 {
68 compatible = "fixed-clock";
69 #clock-cells = <0>;
70 clock-frequency = <11289600>;
71 };
73 sgtlsound: sound {
74 compatible = "fsl,imx53-cpuvo-sgtl5000",
75 "fsl,imx-audio-sgtl5000";
76 model = "imx53-cpuvo-sgtl5000";
77 ssi-controller = <&ssi2>;
78 audio-codec = <&sgtl5000>;
79 audio-routing =
80 "MIC_IN", "Mic Jack",
81 "Mic Jack", "Mic Bias",
82 "Headphone Jack", "HP_OUT";
83 mux-int-port = <2>;
84 mux-ext-port = <6>;
85 };
87 reg_sgtl5k: regulator-sgtl5k {
88 compatible = "regulator-fixed";
89 regulator-name = "regulator-sgtl5k";
90 regulator-min-microvolt = <3300000>;
91 regulator-max-microvolt = <3300000>;
92 regulator-always-on;
93 };
95 reg_usb_otg_vbus: regulator-usb-otg-vbus {
96 compatible = "regulator-fixed";
97 regulator-name = "usbotg_vbus";
98 regulator-min-microvolt = <5000000>;
99 regulator-max-microvolt = <5000000>;
100 pinctrl-0 = <&pinctrl_usb_otg_vbus>;
101 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
102 enable-active-high;
103 };
105 reg_usb_vbus: regulator-usb-vbus {
106 compatible = "regulator-fixed";
107 regulator-name = "usbh1_vbus";
108 regulator-min-microvolt = <5000000>;
109 regulator-max-microvolt = <5000000>;
110 regulator-always-on;
111 };
113 reg_usbh2_vbus: regulator-usbh2-vbus {
114 compatible = "regulator-fixed";
115 regulator-name = "usbh2_vbus";
116 regulator-min-microvolt = <5000000>;
117 regulator-max-microvolt = <5000000>;
118 pinctrl-names = "default";
119 pinctrl-0 = <&pinctrl_usbh2_vbus>;
120 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
121 enable-active-high;
122 };
124 reg_usbh3_vbus: regulator-usbh3-vbus {
125 compatible = "regulator-fixed";
126 regulator-name = "usbh3_vbus";
127 regulator-min-microvolt = <5000000>;
128 regulator-max-microvolt = <5000000>;
129 pinctrl-names = "default";
130 pinctrl-0 = <&pinctrl_usbh3_vbus>;
131 gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;
132 enable-active-high;
133 };
135 reg_tsiref: regulator-tsiref {
136 compatible = "regulator-fixed";
137 regulator-name = "tsiref";
138 regulator-min-microvolt = <2500000>;
139 regulator-max-microvolt = <2500000>;
140 regulator-always-on;
141 };
143 reg_3v3: regulator-3v3 {
144 /* TPS54320 */
145 compatible = "regulator-fixed";
146 regulator-name = "3V3";
147 regulator-min-microvolt = <3300000>;
148 regulator-max-microvolt = <3300000>;
149 regulator-always-on;
150 };
152 reg_3v3_lcd: regulator-3v3-lcd {
153 /* MIC2009 */
154 compatible = "regulator-fixed";
155 regulator-name = "LCD_3V3";
156 vin-supply = <®_3v3>;
157 regulator-min-microvolt = <3300000>;
158 regulator-max-microvolt = <3300000>;
159 regulator-always-on;
160 };
162 pwm_bl: backlight {
163 compatible = "pwm-backlight";
164 pwms = <&pwm2 0 50000>;
165 brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
166 38 40 43 45 48 51 53 56 58 61 63 66 68 71
167 73 76 79 81 84 86 89 91 94 96 99 102 104
168 107 109 112 114 117 119 122 124 127 130
169 132 135 137 140 142 145 147 150 153 155
170 158 160 163 165 168 170 173 175 178 181
171 183 186 188 191 193 196 198 201 204 206
172 209 211 214 216 219 221 224 226 229 232
173 234 237 239 242 244 247 249 252 255>;
174 default-brightness-level = <0>;
175 enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
176 power-supply = <®_3v3_lcd>;
177 };
179 led-controller-1 {
180 compatible = "pwm-leds";
182 led-1 {
183 label = "alarm-brightness";
184 pwms = <&pwm1 0 100000>;
185 max-brightness = <255>;
186 };
187 };
189 led-controller-2 {
190 compatible = "gpio-leds";
191 pinctrl-names = "default";
192 pinctrl-0 = <&pinctrl_alarmled_pins>;
194 led-2 {
195 label = "alarm:red";
196 gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
197 };
199 led-3 {
200 label = "alarm:yellow";
201 gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
202 };
204 led-4 {
205 label = "alarm:blue";
206 gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
207 };
209 led-5 {
210 label = "alarm:silenced";
211 gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
212 };
213 };
215 gpio-poweroff {
216 compatible = "gpio-poweroff";
217 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
218 };
220 gpio-restart {
221 compatible = "gpio-restart";
222 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
223 active-delay = <100>;
224 inactive-delay = <10>;
225 wait-delay = <100>;
226 };
228 power-gpio-keys {
229 compatible = "gpio-keys";
231 power-button {
232 label = "Power button";
233 gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
234 linux,code = <KEY_POWER>;
235 };
236 };
238 touch-lock-key {
239 compatible = "gpio-keys";
241 touch-lock-button {
242 label = "Touch lock button";
243 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
244 linux,code = <KEY_F12>;
245 };
246 };
248 usbphy2: usbphy-2 {
249 compatible = "usb-nop-xceiv";
250 vcc-supply = <®_3v3>;
251 reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
252 clock-names = "main_clk";
253 clock-frequency = <24000000>;
254 clocks = <&clks IMX5_CLK_CKO2>;
255 assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
256 assigned-clock-parents = <&clks IMX5_CLK_OSC>;
257 };
259 usbphy3: usbphy-3 {
260 compatible = "usb-nop-xceiv";
261 vcc-supply = <®_3v3>;
262 reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
263 clock-names = "main_clk";
265 clock-frequency = <24000000>;
266 clocks = <&clks IMX5_CLK_CKO2>;
267 assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
268 assigned-clock-parents = <&clks IMX5_CLK_OSC>;
269 };
271 panel-lvds0 {
272 compatible = "nvd,9128";
273 power-supply = <®_3v3_lcd>;
275 port {
276 panel_in_lvds0: endpoint {
277 remote-endpoint = <&lvds0_out>;
278 };
279 };
280 };
281 };
283 &usbphy0 {
284 vcc-supply = <®_3v3>;
285 };
287 &usbphy1 {
288 vcc-supply = <®_3v3>;
289 };
291 &audmux {
292 pinctrl-names = "default";
293 pinctrl-0 = <&pinctrl_audmux>;
294 status = "okay";
295 };
297 &cpu0 {
298 /* CPU rated to 1GHz, not 1.2GHz as per the default settings */
299 operating-points = <
300 /* kHz uV */
301 166666 850000
302 400000 900000
303 800000 1050000
304 1000000 1200000
305 >;
306 };
308 &ecspi1 {
309 pinctrl-names = "default";
310 pinctrl-0 = <&pinctrl_ecspi1>;
311 cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW
312 &gpio4 10 GPIO_ACTIVE_LOW
313 &gpio4 11 GPIO_ACTIVE_LOW
314 &gpio4 12 GPIO_ACTIVE_LOW>;
315 status = "okay";
317 spidev0: spi@0 {
318 compatible = "ge,achc";
319 reg = <0>;
320 spi-max-frequency = <1000000>;
321 };
323 spidev1: spi@1 {
324 compatible = "ge,achc";
325 reg = <1>;
326 spi-max-frequency = <1000000>;
327 };
329 gpioxra0: gpio@2 {
330 compatible = "exar,xra1403";
331 reg = <2>;
332 gpio-controller;
333 #gpio-cells = <2>;
334 spi-max-frequency = <1000000>;
335 };
337 gpioxra1: gpio@3 {
338 compatible = "exar,xra1403";
339 reg = <3>;
340 gpio-controller;
341 #gpio-cells = <2>;
342 spi-max-frequency = <1000000>;
343 };
344 };
346 &ecspi2 {
347 pinctrl-names = "default";
348 pinctrl-0 = <&pinctrl_ecspi2>;
349 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
350 status = "okay";
352 da9053@0 {
353 compatible = "dlg,da9053-aa";
354 reg = <0>;
355 interrupt-parent = <&gpio3>;
356 interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
357 spi-max-frequency = <1000000>;
358 dlg,tsi-as-adc;
359 tsiref-supply = <®_tsiref>;
361 regulators {
362 buck1_reg: buck1 {
363 regulator-name = "BUCKCORE";
364 regulator-min-microvolt = <500000>;
365 regulator-max-microvolt = <2075000>;
366 regulator-always-on;
367 };
369 buck2_reg: buck2 {
370 regulator-name = "BUCKPRO";
371 regulator-min-microvolt = <500000>;
372 regulator-max-microvolt = <2075000>;
373 regulator-always-on;
374 };
376 buck3_reg: buck3 {
377 regulator-name = "BUCKMEM";
378 regulator-min-microvolt = <925000>;
379 regulator-max-microvolt = <2500000>;
380 regulator-always-on;
381 };
383 buck4_reg: buck4 {
384 regulator-name = "BUCKPERI";
385 regulator-min-microvolt = <1800000>;
386 regulator-max-microvolt = <3600000>;
387 regulator-always-on;
388 };
390 ldo1_reg: ldo1 {
391 regulator-name = "ldo1_1v3";
392 regulator-min-microvolt = <600000>;
393 regulator-max-microvolt = <1800000>;
394 regulator-always-on;
395 };
397 ldo2_reg: ldo2 {
398 regulator-name = "ldo2_1v3";
399 regulator-min-microvolt = <600000>;
400 regulator-max-microvolt = <1800000>;
401 regulator-always-on;
402 };
404 ldo3_reg: ldo3 {
405 regulator-name = "ldo3_3v3";
406 regulator-min-microvolt = <1725000>;
407 regulator-max-microvolt = <3300000>;
408 regulator-always-on;
409 };
411 ldo4_reg: ldo4 {
412 regulator-name = "ldo4_2v775";
413 regulator-min-microvolt = <1725000>;
414 regulator-max-microvolt = <3300000>;
415 regulator-always-on;
416 };
418 ldo5_reg: ldo5 {
419 regulator-name = "ldo5_3v3";
420 regulator-min-microvolt = <1200000>;
421 regulator-max-microvolt = <3600000>;
422 regulator-always-on;
423 };
425 ldo6_reg: ldo6 {
426 regulator-name = "ldo6_1v3";
427 regulator-min-microvolt = <1200000>;
428 regulator-max-microvolt = <3600000>;
429 regulator-always-on;
430 };
432 ldo7_reg: ldo7 {
433 regulator-name = "ldo7_2v75";
434 regulator-min-microvolt = <1200000>;
435 regulator-max-microvolt = <3600000>;
436 regulator-always-on;
437 };
439 ldo8_reg: ldo8 {
440 regulator-name = "ldo8_1v8";
441 regulator-min-microvolt = <1200000>;
442 regulator-max-microvolt = <3600000>;
443 regulator-always-on;
444 };
446 ldo9_reg: ldo9 {
447 regulator-name = "ldo9_1v5";
448 regulator-min-microvolt = <1250000>;
449 regulator-max-microvolt = <3650000>;
450 regulator-always-on;
451 };
453 ldo10_reg: ldo10 {
454 regulator-name = "ldo10_1v3";
455 regulator-min-microvolt = <1200000>;
456 regulator-max-microvolt = <3600000>;
457 regulator-always-on;
458 };
459 };
460 };
462 };
464 &esdhc3 {
465 pinctrl-names = "default";
466 pinctrl-0 = <&pinctrl_esdhc3>;
467 bus-width = <8>;
468 status = "okay";
469 };
471 &fec {
472 pinctrl-names = "default";
473 pinctrl-0 = <&pinctrl_fec>;
474 phy-supply = <®_3v3>;
475 phy-mode = "rmii";
476 phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
477 status = "okay";
478 };
480 &i2c1 {
481 pinctrl-names = "default", "gpio";
482 pinctrl-0 = <&pinctrl_i2c1>;
483 pinctrl-1 = <&pinctrl_i2c1_gpio>;
484 sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
485 scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
486 status = "okay";
488 i2c-switch@70 {
489 compatible = "nxp,pca9547";
490 #address-cells = <1>;
491 #size-cells = <0>;
492 reg = <0x70>;
493 reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
495 i2c4: i2c@0 {
496 #address-cells = <1>;
497 #size-cells = <0>;
498 reg = <0>;
500 sgtl5000: codec@a {
501 compatible = "fsl,sgtl5000";
502 reg = <0xa>;
503 #sound-dai-cells = <0>;
504 VDDA-supply = <®_sgtl5k>;
505 VDDIO-supply = <®_sgtl5k>;
506 clocks = <&cko2_11M>;
507 status = "okay";
508 };
509 };
511 i2c5: i2c@1 {
512 #address-cells = <1>;
513 #size-cells = <0>;
514 reg = <1>;
516 rtc@30 {
517 compatible = "sii,s35390a";
518 reg = <0x30>;
519 };
521 temp@48 {
522 compatible = "ti,tmp112";
523 reg = <0x48>;
524 };
526 mma8453q: accelerometer@1c {
527 compatible = "fsl,mma8453";
528 reg = <0x1c>;
529 interrupt-parent = <&gpio1>;
530 interrupts = <6 IRQ_TYPE_NONE>;
531 interrupt-names = "INT1";
532 };
534 mpl3115: pressure-sensor@60 {
535 compatible = "fsl,mpl3115";
536 reg = <0x60>;
537 };
539 eeprom: eeprom@50 {
540 compatible = "atmel,24c08";
541 reg = <0x50>;
542 };
543 };
545 i2c6: i2c@2 {
546 #address-cells = <1>;
547 #size-cells = <0>;
548 reg = <2>;
549 };
551 i2c7: i2c@3 {
552 #address-cells = <1>;
553 #size-cells = <0>;
554 reg = <3>;
555 };
557 i2c8: i2c@4 {
558 #address-cells = <1>;
559 #size-cells = <0>;
560 reg = <4>;
561 };
563 i2c9: i2c@5 {
564 #address-cells = <1>;
565 #size-cells = <0>;
566 reg = <5>;
567 };
569 i2c10: i2c@6 {
570 #address-cells = <1>;
571 #size-cells = <0>;
572 reg = <6>;
573 };
575 i2c11: i2c@7 {
576 #address-cells = <1>;
577 #size-cells = <0>;
578 reg = <7>;
579 };
580 };
581 };
583 &i2c2 {
584 pinctrl-names = "default", "gpio";
585 pinctrl-0 = <&pinctrl_i2c2>;
586 pinctrl-1 = <&pinctrl_i2c2_gpio>;
587 sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
588 scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
589 status = "okay";
591 touchscreen@4b {
592 compatible = "atmel,maxtouch";
593 reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
594 reg = <0x4b>;
595 interrupt-parent = <&gpio5>;
596 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
597 };
598 };
600 &i2c3 {
601 pinctrl-names = "default", "gpio";
602 pinctrl-0 = <&pinctrl_i2c3>;
603 pinctrl-1 = <&pinctrl_i2c3_gpio>;
604 sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
605 scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
606 status = "okay";
607 };
609 &ldb {
610 status = "okay";
612 lvds0: lvds-channel@0 {
613 status = "okay";
615 port@2 {
616 lvds0_out: endpoint {
617 remote-endpoint = <&panel_in_lvds0>;
618 };
619 };
620 };
621 };
623 &pmu {
624 secure-reg-access;
625 };
627 &pwm1 {
628 #pwm-cells = <2>;
629 pinctrl-names = "default";
630 pinctrl-0 = <&pinctrl_pwm1>;
631 status = "okay";
632 };
634 &pwm2 {
635 #pwm-cells = <2>;
636 pinctrl-names = "default";
637 pinctrl-0 = <&pinctrl_pwm2>;
638 status = "okay";
639 };
641 &ssi2 {
642 status = "okay";
643 };
645 &uart1 {
646 pinctrl-names = "default";
647 pinctrl-0 = <&pinctrl_uart1>;
648 status = "okay";
649 };
651 &uart2 {
652 pinctrl-names = "default";
653 pinctrl-0 = <&pinctrl_uart2>;
654 status = "okay";
655 };
657 &uart3 {
658 pinctrl-names = "default";
659 pinctrl-0 = <&pinctrl_uart3>;
660 uart-has-rtscts;
661 status = "okay";
662 };
664 &uart4 {
665 pinctrl-names = "default";
666 pinctrl-0 = <&pinctrl_uart4>;
667 status = "okay";
668 };
670 &uart5 {
671 pinctrl-names = "default";
672 pinctrl-0 = <&pinctrl_uart5>;
673 status = "okay";
674 };
676 &usbotg {
677 dr_mode = "otg";
678 phy_type = "utmi";
679 vbus-supply = <®_usb_otg_vbus>;
680 pinctrl-0 = <&pinctrl_usb_otg>;
681 status = "okay";
682 };
684 &usbh1 {
685 vbus-supply = <®_usb_vbus>;
686 phy_type = "utmi";
687 dr_mode = "host";
688 status = "okay";
689 };
691 &usbh2 {
692 pinctrl-names = "default";
693 pinctrl-0 = <&pinctrl_usbh2>;
694 phy_type = "ulpi";
695 dr_mode = "host";
696 fsl,usbphy = <&usbphy2>;
697 vbus-supply = <®_usbh2_vbus>;
698 status = "okay";
699 };
701 &usbh3 {
702 pinctrl-names = "default";
703 pinctrl-0 = <&pinctrl_usbh3>;
704 phy_type = "ulpi";
705 dr_mode = "host";
706 vbus-supply = <®_usbh3_vbus>;
707 fsl,usbphy = <&usbphy3>;
708 status = "okay";
709 };
711 &iomuxc {
712 pinctrl-names = "default";
713 pinctrl-0 = <&pinctrl_hog_rev6>;
715 pinctrl_audmux: audmuxgrp {
716 fsl,pins = <
717 MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x400
718 MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x400
719 MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x400
720 MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x400
721 MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x400
722 MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x400
723 MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x400
724 MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x400
725 >;
726 };
728 pinctrl_ecspi1: ecspi1grp {
729 fsl,pins = <
730 MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x400
731 MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x400
732 MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x400
733 /* ECSPI1_SS0, must treat as GPIO for EzPort */
734 MX53_PAD_DISP0_DAT23__GPIO5_17 0x400
735 MX53_PAD_KEY_COL2__GPIO4_10 0x0
736 MX53_PAD_KEY_ROW2__GPIO4_11 0x0
737 MX53_PAD_KEY_COL3__GPIO4_12 0x0
738 >;
739 };
741 pinctrl_ecspi2: ecspi2grp {
742 fsl,pins = <
743 MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x0
744 MX53_PAD_EIM_OE__ECSPI2_MISO 0x0
745 MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x0
746 MX53_PAD_EIM_RW__GPIO2_26 0x0
747 >;
748 };
750 pinctrl_esdhc1: esdhc1grp {
751 fsl,pins = <
752 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
753 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
754 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
755 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
756 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
757 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
758 >;
759 };
761 pinctrl_esdhc3: esdhc3grp {
762 fsl,pins = <
763 MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
764 MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
765 MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
766 MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
767 MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
768 MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
769 MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
770 MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
771 MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
772 MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
773 >;
774 };
776 pinctrl_fec: fecgrp {
777 fsl,pins = <
778 MX53_PAD_FEC_MDC__FEC_MDC 0x0
779 MX53_PAD_FEC_MDIO__FEC_MDIO 0x0
780 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x0
781 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x0
782 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x0
783 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x0
784 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x0
785 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x0
786 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x0
787 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x0
788 >;
789 };
791 pinctrl_hog_rev6: hoggrp {
792 fsl,pins = <
793 /* CKO2 */
794 MX53_PAD_GPIO_3__CCM_CLKO2 0x4
795 /* DEFIB_SYNC_MARKER_IN_IRQ */
796 MX53_PAD_GPIO_5__GPIO1_5 0x0
797 /* ACCELEROMETER_DATA_RDY_N */
798 MX53_PAD_GPIO_6__GPIO1_6 0x0
799 /* TEMPERATURE_ALERT_N */
800 MX53_PAD_GPIO_7__GPIO1_7 0x0
801 /* BAROMETRIC_PRESSURE_DATA_RDY_N */
802 MX53_PAD_GPIO_8__GPIO1_8 0x0
803 /* DOCKING_I2C_INTERFACE_IRQ_N */
804 MX53_PAD_PATA_DATA4__GPIO2_4 0x0
805 /* PWR_OUT_TO_DOCK_FAULT_N */
806 MX53_PAD_PATA_DATA5__GPIO2_5 0x0
807 /* ENABLE_PWR_TO_DOCK_N */
808 MX53_PAD_PATA_DATA6__GPIO2_6 0x0
809 /* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */
810 MX53_PAD_PATA_DATA7__GPIO2_7 0x0
811 /* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */
812 MX53_PAD_PATA_DATA12__GPIO2_12 0x0
813 /* DOCK_PRESENT_N */
814 MX53_PAD_PATA_DATA13__GPIO2_13 0x0
815 /* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */
816 MX53_PAD_PATA_DATA14__GPIO2_14 0x0
817 /* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */
818 MX53_PAD_PATA_DATA15__GPIO2_15 0x0
819 /* RESET_IMX535_ETHERNET_PHY_N */
820 MX53_PAD_EIM_A22__GPIO2_16 0x0
821 /* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */
822 MX53_PAD_EIM_A21__GPIO2_17 0x0
823 /* RESET_I2C1_BUS_SEGMENT_MUX_N */
824 MX53_PAD_EIM_A20__GPIO2_18 0x0
825 /* RESET_IMX535_USB_HOST3_PHY_N */
826 MX53_PAD_EIM_A19__GPIO2_19 0x0
827 /* ESDHC3_EMMC_NAND_RST_N */
828 MX53_PAD_EIM_A18__GPIO2_20 0x0
829 /* LCD_AND_UI_INTERFACE_PWR_FAULT_N */
830 MX53_PAD_EIM_A17__GPIO2_21 0x0
831 /* POWER_DOWN_LVDS0_DESERIALIZER_N */
832 MX53_PAD_EIM_A16__GPIO2_22 0x0
833 /* POWER_DOWN_LVDS1_DESERIALIZER_N */
834 MX53_PAD_EIM_LBA__GPIO2_27 0x0
835 /* RESET_DP0_TRANSMITTER_N */
836 MX53_PAD_EIM_EB0__GPIO2_28 0x0
837 /* RESET_DP1_TRANSMITTER_N */
838 MX53_PAD_EIM_EB1__GPIO2_29 0x0
839 /* ENABLE_SPDIF_AUDIO_TO_DP0 */
840 MX53_PAD_EIM_DA0__GPIO3_0 0x0
841 /* ENABLE_SPDIF_AUDIO_TO_DP1 */
842 MX53_PAD_EIM_DA1__GPIO3_1 0x0
843 /* LVDS1_MUX_CTRL */
844 MX53_PAD_EIM_DA2__GPIO3_2 0x0
845 /* LVDS0_MUX_CTRL */
846 MX53_PAD_EIM_DA3__GPIO3_3 0x0
847 /* DP1_TRANSMITTER_IRQ */
848 MX53_PAD_EIM_DA4__GPIO3_4 0x0
849 /* DP0_TRANSMITTER_IRQ */
850 MX53_PAD_EIM_DA5__GPIO3_5 0x0
851 /* USB_RESET_N */
852 MX53_PAD_EIM_DA6__GPIO3_6 0x0
853 /* ENABLE_BATTERY_CHARGER */
854 MX53_PAD_EIM_DA7__GPIO3_7 0x0
855 /* SOFTWARE_CONTROLLED_PWR_CYCLE */
856 MX53_PAD_EIM_DA8__GPIO3_8 0x0
857 /* SOFTWARE_CONTROLLED_POWERDOWN */
858 MX53_PAD_EIM_DA9__GPIO3_9 0x0
859 /* DC_PWR_IN_OK */
860 MX53_PAD_EIM_DA10__GPIO3_10 0x0
861 /* BATT_PRESENT_N */
862 MX53_PAD_EIM_DA11__GPIO3_11 0xe4
863 /* PMIC_IRQ_N */
864 MX53_PAD_EIM_DA12__GPIO3_12 0x0
865 /* PMIC_VDD_FAULT_STATUS_N */
866 MX53_PAD_EIM_DA13__GPIO3_13 0x0
867 /* IMX535_ETHERNET_PHY_STATUS_IRQ_N */
868 MX53_PAD_EIM_DA14__GPIO3_14 0x0
869 /* NOT USED - AVAILABLE 3.3V GPIO */
870 MX53_PAD_EIM_DA15__GPIO3_15 0x0
871 /* NOT USED - AVAILABLE 3.3V GPIO */
872 MX53_PAD_EIM_D22__GPIO3_22 0x0
873 /* NOT USED - AVAILABLE 3.3V GPIO */
874 MX53_PAD_EIM_D24__GPIO3_24 0x0
875 /* NBP_PUMP_VALVE_PWR_ENABLE */
876 MX53_PAD_EIM_D25__GPIO3_25 0x0
877 /* NIBP_RESET_N */
878 MX53_PAD_EIM_D26__GPIO3_26 0x0
879 /* LATCHED_OVERPRESSURE_N */
880 MX53_PAD_EIM_D27__GPIO3_27 0x0
881 /* NBP_SBWTCLK */
882 MX53_PAD_EIM_D29__GPIO3_29 0x0
883 /* ENABLE_WIFI_MODULE */
884 MX53_PAD_GPIO_11__GPIO4_1 0x400
885 /* WIFI_MODULE_IRQ_N */
886 MX53_PAD_GPIO_12__GPIO4_2 0x400
887 /* ENABLE_BLUETOOTH_MODULE */
888 MX53_PAD_GPIO_13__GPIO4_3 0x400
889 /* RESET_IMX535_USB_HOST2_PHY_N */
890 MX53_PAD_GPIO_14__GPIO4_4 0x400
891 /* ONKEY_IS_DEPRESSED */
892 MX53_PAD_KEY_ROW3__GPIO4_13 0x0
893 /* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */
894 MX53_PAD_EIM_WAIT__GPIO5_0 0x0
895 /* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */
896 MX53_PAD_EIM_A25__GPIO5_2 0x0
897 /* I2C_PCAP_TOUCHSCREEN_IRQ_N */
898 MX53_PAD_EIM_A24__GPIO5_4 0x0
899 /* NOT USED - AVAILABLE 1.8V GPIO */
900 MX53_PAD_DISP0_DAT13__GPIO5_7 0x400
901 /* NOT USED - AVAILABLE 1.8V GPIO */
902 MX53_PAD_DISP0_DAT14__GPIO5_8 0x400
903 /* NOT USED - AVAILABLE 1.8V GPIO */
904 MX53_PAD_DISP0_DAT15__GPIO5_9 0x400
905 /* HOST_CONTROLLED_RESET_TO_LCD_N */
906 MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0
907 /* HOST_CONTROLLED_RESET_TO_PCAP_N */
908 MX53_PAD_CSI0_MCLK__GPIO5_19 0x0
909 /* LR_SCAN_CTRL */
910 MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0
911 /* UD_SCAN_CTRL */
912 MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0
913 /* DATA_WIDTH_CTRL */
914 MX53_PAD_CSI0_DAT10__GPIO5_28 0x0
915 /* BACKLIGHT_ENABLE */
916 MX53_PAD_CSI0_DAT11__GPIO5_29 0x0
917 /* MED_USB_PORT_1_HOST_SELECT */
918 MX53_PAD_EIM_A23__GPIO6_6 0x0
919 /* MED_USB_PORT_2_HOST_SELECT */
920 MX53_PAD_NANDF_CLE__GPIO6_7 0x0
921 /* MED_USB_PORT_3_HOST_SELECT */
922 MX53_PAD_NANDF_ALE__GPIO6_8 0x0
923 /* MED_USB_PORT_4_HOST_SELECT */
924 MX53_PAD_NANDF_WP_B__GPIO6_9 0x0
925 /* MED_USB_PORT_5_HOST_SELECT */
926 MX53_PAD_NANDF_RB0__GPIO6_10 0x0
927 /* MED_USB_PORT_6_HOST_SELECT */
928 MX53_PAD_NANDF_CS0__GPIO6_11 0x0
929 /* MED_USB_PORT_7_HOST_SELECT */
930 MX53_PAD_NANDF_WE_B__GPIO6_12 0x0
931 /* MED_USB_PORT_8_HOST_SELECT */
932 MX53_PAD_NANDF_RE_B__GPIO6_13 0x0
933 /* MED_USB_PORT_TO_IMX_SELECT_0 */
934 MX53_PAD_NANDF_CS1__GPIO6_14 0x0
935 /* MED_USB_PORT_TO_IMX_SELECT_1 */
936 MX53_PAD_NANDF_CS2__GPIO6_15 0x0
937 /* MED_USB_PORT_TO_IMX_SELECT_2 */
938 MX53_PAD_NANDF_CS3__GPIO6_16 0x0
939 /* POWER_AND_BOOT_STATUS_INDICATOR */
940 MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4
941 /* RUNNING_ON_BATTERY_INDICATOR_GREEN */
942 MX53_PAD_GPIO_16__GPIO7_11 0x0
943 /* BATTERY_STATUS_INDICATOR_AMBER */
944 MX53_PAD_GPIO_17__GPIO7_12 0x0
945 >;
946 };
948 pinctrl_i2c1: i2c1grp {
949 fsl,pins = <
950 MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4
951 MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4
952 >;
953 };
955 pinctrl_i2c1_gpio: i2c1gpiogrp {
956 fsl,pins = <
957 MX53_PAD_EIM_D28__GPIO3_28 0x1e4
958 MX53_PAD_EIM_D21__GPIO3_21 0x1e4
959 >;
960 };
962 pinctrl_i2c2: i2c2grp {
963 fsl,pins = <
964 MX53_PAD_EIM_EB2__I2C2_SCL 0x400001e4
965 MX53_PAD_EIM_D16__I2C2_SDA 0x400001e4
966 >;
967 };
969 pinctrl_i2c2_gpio: i2c2gpiogrp {
970 fsl,pins = <
971 MX53_PAD_EIM_D16__GPIO3_16 0x1e4
972 MX53_PAD_EIM_EB2__GPIO2_30 0x1e4
973 >;
974 };
976 pinctrl_i2c3: i2c3grp {
977 fsl,pins = <
978 MX53_PAD_EIM_D17__I2C3_SCL 0x400001e4
979 MX53_PAD_EIM_D18__I2C3_SDA 0x400001e4
980 >;
981 };
983 pinctrl_i2c3_gpio: i2c3gpiogrp {
984 fsl,pins = <
985 MX53_PAD_EIM_D18__GPIO3_18 0x1e4
986 MX53_PAD_EIM_D17__GPIO3_17 0x1e4
987 >;
988 };
990 pinctrl_pwm1: pwm1grp {
991 fsl,pins = <
992 MX53_PAD_GPIO_9__PWM1_PWMO 0x5
993 >;
994 };
996 pinctrl_pwm2: pwm2grp {
997 fsl,pins = <
998 MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x5
999 >;
1000 };
1002 pinctrl_uart1: uart1grp {
1003 fsl,pins = <
1004 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
1005 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
1006 >;
1007 };
1009 pinctrl_uart2: uart2grp {
1010 fsl,pins = <
1011 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
1012 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
1013 >;
1014 };
1016 pinctrl_uart3: uart3grp {
1017 fsl,pins = <
1018 MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
1019 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
1020 MX53_PAD_EIM_D23__UART3_CTS 0x1e4
1021 MX53_PAD_EIM_EB3__UART3_RTS 0x1e4
1022 >;
1023 };
1025 pinctrl_uart4: uart4grp {
1026 fsl,pins = <
1027 MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
1028 MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
1029 >;
1030 };
1032 pinctrl_uart5: uart5grp {
1033 fsl,pins = <
1034 MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
1035 MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
1036 >;
1037 };
1039 pinctrl_usb_otg_vbus: usb-otg-vbusgrp {
1040 fsl,pins = <
1041 /* USB_HS_OTG_VBUS_ENABLE */
1042 MX53_PAD_KEY_ROW4__GPIO4_15 0x1c4
1043 >;
1044 };
1046 pinctrl_usbh2: usbh2grp {
1047 fsl,pins = <
1048 /* USB H2 */
1049 MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180
1050 MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180
1051 MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180
1052 MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180
1053 MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180
1054 MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180
1055 MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180
1056 MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180
1057 MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x180
1058 MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x180
1059 MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x180
1060 MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x5
1061 MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x180
1062 >;
1063 };
1065 pinctrl_usbh2_vbus: usbh2-vbusgrp {
1066 fsl,pins = <
1067 /* USB_HS_HOST2_VBUS_ENABLE */
1068 MX53_PAD_EIM_D31__GPIO3_31 0x0
1069 >;
1070 };
1072 pinctrl_usbh3_vbus: usbh3-vbusgrp {
1073 fsl,pins = <
1074 /* USB_HS_HOST3_VBUS_ENABLE */
1075 MX53_PAD_CSI0_DAT9__GPIO5_27 0x0
1076 >;
1077 };
1079 pinctrl_usbh3: usbh3grp {
1080 fsl,pins = <
1081 /* USB H3 */
1082 MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180
1083 MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180
1084 MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180
1085 MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180
1086 MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180
1087 MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180
1088 MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180
1089 MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180
1090 MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x5
1091 MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x180
1092 MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x180
1093 MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x180
1094 MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x180
1095 >;
1096 };
1098 pinctrl_usb_otg: usbotggrp {
1099 fsl,pins = <
1100 /* USB_OTG_FAULT_N */
1101 MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180
1102 >;
1103 };
1105 pinctrl_alarmled_pins: qmx6alarmledgrp {
1106 fsl,pins = <
1107 /* ACTIVATE_ALARM_LIGHT_RED */
1108 MX53_PAD_PATA_DIOR__GPIO7_3 0x0
1109 /* ACTIVATE_ALARM_LIGHT_YELLOW */
1110 MX53_PAD_PATA_DA_1__GPIO7_7 0x0
1111 /* ACTIVATE_ALARM_LIGHT_CYAN */
1112 MX53_PAD_PATA_DA_2__GPIO7_8 0x0
1113 /* AUDIO_ALARMS_SILENCED_INDICATOR */
1114 MX53_PAD_GPIO_18__GPIO7_13 0x0
1115 >;
1116 };
1117 };