| blob | e4578ed3371ef27dcf2b9f0cecadb024b6aae92e |
1 /*
2 * Support for imx6 based Advantech DMS-BA16 Qseven module
3 *
4 * Copyright 2015 Timesys Corporation.
5 * Copyright 2015 General Electric Company
6 *
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
10 * whole.
11 *
12 * a) This file is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * version 2 as published by the Free Software Foundation.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
45 #include "imx6q.dtsi"
46 #include <dt-bindings/gpio/gpio.h>
48 / {
49 memory@10000000 {
50 device_type = "memory";
51 reg = <0x10000000 0x40000000>;
52 };
54 backlight_lvds: backlight {
55 compatible = "pwm-backlight";
56 pinctrl-names = "default";
57 pinctrl-0 = <&pinctrl_display>;
58 pwms = <&pwm1 0 5000000>;
59 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
60 10 11 12 13 14 15 16 17 18 19
61 20 21 22 23 24 25 26 27 28 29
62 30 31 32 33 34 35 36 37 38 39
63 40 41 42 43 44 45 46 47 48 49
64 50 51 52 53 54 55 56 57 58 59
65 60 61 62 63 64 65 66 67 68 69
66 70 71 72 73 74 75 76 77 78 79
67 80 81 82 83 84 85 86 87 88 89
68 90 91 92 93 94 95 96 97 98 99
69 100 101 102 103 104 105 106 107 108 109
70 110 111 112 113 114 115 116 117 118 119
71 120 121 122 123 124 125 126 127 128 129
72 130 131 132 133 134 135 136 137 138 139
73 140 141 142 143 144 145 146 147 148 149
74 150 151 152 153 154 155 156 157 158 159
75 160 161 162 163 164 165 166 167 168 169
76 170 171 172 173 174 175 176 177 178 179
77 180 181 182 183 184 185 186 187 188 189
78 190 191 192 193 194 195 196 197 198 199
79 200 201 202 203 204 205 206 207 208 209
80 210 211 212 213 214 215 216 217 218 219
81 220 221 222 223 224 225 226 227 228 229
82 230 231 232 233 234 235 236 237 238 239
83 240 241 242 243 244 245 246 247 248 249
84 250 251 252 253 254 255>;
85 default-brightness-level = <255>;
86 enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
87 };
89 reg_1p8v: regulator-1p8v {
90 compatible = "regulator-fixed";
91 regulator-name = "1P8V";
92 regulator-min-microvolt = <1800000>;
93 regulator-max-microvolt = <1800000>;
94 regulator-always-on;
95 };
97 reg_3p3v: regulator-3p3v {
98 compatible = "regulator-fixed";
99 regulator-name = "3P3V";
100 regulator-min-microvolt = <3300000>;
101 regulator-max-microvolt = <3300000>;
102 regulator-always-on;
103 };
105 reg_lvds: regulator-lvds {
106 compatible = "regulator-fixed";
107 regulator-name = "lvds_ppen";
108 regulator-min-microvolt = <3300000>;
109 regulator-max-microvolt = <3300000>;
110 regulator-boot-on;
111 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
112 enable-active-high;
113 };
115 reg_usb_h1_vbus: regulator-usbh1vbus {
116 compatible = "regulator-fixed";
117 regulator-name = "usb_h1_vbus";
118 regulator-min-microvolt = <5000000>;
119 regulator-max-microvolt = <5000000>;
120 };
122 reg_usb_otg_vbus: regulator-usbotgvbus {
123 compatible = "regulator-fixed";
124 regulator-name = "usb_otg_vbus";
125 regulator-min-microvolt = <5000000>;
126 regulator-max-microvolt = <5000000>;
127 };
128 };
130 &audmux {
131 pinctrl-names = "default";
132 pinctrl-0 = <&pinctrl_audmux>;
133 status = "okay";
134 };
136 &ecspi1 {
137 cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
138 pinctrl-names = "default";
139 pinctrl-0 = <&pinctrl_ecspi1>;
140 status = "okay";
142 flash: n25q032@0 {
143 compatible = "jedec,spi-nor";
144 #address-cells = <1>;
145 #size-cells = <1>;
146 spi-max-frequency = <20000000>;
147 reg = <0>;
149 partition@0 {
150 label = "U-Boot";
151 reg = <0x0 0xc0000>;
152 };
154 partition@c0000 {
155 label = "env";
156 reg = <0xc0000 0x10000>;
157 };
159 partition@d0000 {
160 label = "spare";
161 reg = <0xd0000 0x320000>;
162 };
164 partition@3f0000 {
165 label = "mfg";
166 reg = <0x3f0000 0x10000>;
167 };
168 };
169 };
171 &fec {
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_enet>;
174 phy-mode = "rgmii-id";
175 status = "okay";
176 };
178 &hdmi {
179 ddc-i2c-bus = <&i2c2>;
180 status = "okay";
181 };
183 &i2c1 {
184 clock-frequency = <100000>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&pinctrl_i2c1>;
187 status = "okay";
188 };
190 &i2c2 {
191 clock-frequency = <100000>;
192 pinctrl-names = "default";
193 pinctrl-0 = <&pinctrl_i2c2>;
194 status = "okay";
195 };
197 &i2c3 {
198 clock-frequency = <100000>;
199 pinctrl-names = "default";
200 pinctrl-0 = <&pinctrl_i2c3>;
201 status = "okay";
203 pmic@58 {
204 compatible = "dlg,da9063";
205 reg = <0x58>;
206 pinctrl-names = "default";
207 pinctrl-0 = <&pinctrl_pmic>;
208 interrupt-parent = <&gpio7>;
209 interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
211 onkey {
212 compatible = "dlg,da9063-onkey";
213 };
215 regulators {
216 vdd_bcore1: bcore1 {
217 regulator-min-microvolt = <1420000>;
218 regulator-max-microvolt = <1420000>;
219 regulator-always-on;
220 regulator-boot-on;
221 };
223 vdd_bcore2: bcore2 {
224 regulator-min-microvolt = <1420000>;
225 regulator-max-microvolt = <1420000>;
226 regulator-always-on;
227 regulator-boot-on;
228 };
230 vdd_bpro: bpro {
231 regulator-min-microvolt = <1500000>;
232 regulator-max-microvolt = <1500000>;
233 regulator-always-on;
234 regulator-boot-on;
235 };
237 vdd_bmem: bmem {
238 regulator-min-microvolt = <1800000>;
239 regulator-max-microvolt = <1800000>;
240 regulator-always-on;
241 regulator-boot-on;
242 };
244 vdd_bio: bio {
245 regulator-min-microvolt = <1800000>;
246 regulator-max-microvolt = <1800000>;
247 regulator-always-on;
248 regulator-boot-on;
249 };
251 vdd_bperi: bperi {
252 regulator-min-microvolt = <3300000>;
253 regulator-max-microvolt = <3300000>;
254 regulator-always-on;
255 regulator-boot-on;
256 };
258 vdd_ldo1: ldo1 {
259 regulator-min-microvolt = <600000>;
260 regulator-max-microvolt = <1860000>;
261 };
263 vdd_ldo2: ldo2 {
264 regulator-min-microvolt = <600000>;
265 regulator-max-microvolt = <1860000>;
266 };
268 vdd_ldo3: ldo3 {
269 regulator-min-microvolt = <900000>;
270 regulator-max-microvolt = <3440000>;
271 };
273 vdd_ldo4: ldo4 {
274 regulator-min-microvolt = <900000>;
275 regulator-max-microvolt = <3440000>;
276 };
278 vdd_ldo5: ldo5 {
279 regulator-min-microvolt = <900000>;
280 regulator-max-microvolt = <3600000>;
281 };
283 vdd_ldo6: ldo6 {
284 regulator-min-microvolt = <900000>;
285 regulator-max-microvolt = <3600000>;
286 };
288 vdd_ldo7: ldo7 {
289 regulator-min-microvolt = <900000>;
290 regulator-max-microvolt = <3600000>;
291 };
293 vdd_ldo8: ldo8 {
294 regulator-min-microvolt = <900000>;
295 regulator-max-microvolt = <3600000>;
296 };
298 vdd_ldo9: ldo9 {
299 regulator-min-microvolt = <950000>;
300 regulator-max-microvolt = <3600000>;
301 };
303 vdd_ldo10: ldo10 {
304 regulator-min-microvolt = <900000>;
305 regulator-max-microvolt = <3600000>;
306 };
308 vdd_ldo11: ldo11 {
309 regulator-min-microvolt = <900000>;
310 regulator-max-microvolt = <3600000>;
311 regulator-always-on;
312 regulator-boot-on;
313 };
314 };
315 };
317 rtc@32 {
318 compatible = "epson,rx8010";
319 pinctrl-names = "default";
320 pinctrl-0 = <&pinctrl_rtc>;
321 reg = <0x32>;
322 interrupt-parent = <&gpio4>;
323 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
324 };
325 };
327 &pcie {
328 pinctrl-names = "default";
329 pinctrl-0 = <&pinctrl_pcie>;
330 reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
331 fsl,tx-swing-full = <103>;
332 fsl,tx-swing-low = <103>;
333 status = "okay";
334 };
336 &pwm1 {
337 #pwm-cells = <2>;
338 pinctrl-names = "default";
339 pinctrl-0 = <&pinctrl_pwm1>;
340 status = "okay";
341 };
343 &pwm2 {
344 pinctrl-names = "default";
345 pinctrl-0 = <&pinctrl_pwm2>;
346 status = "disabled";
347 };
349 &sata {
350 status = "okay";
351 };
353 &ssi1 {
354 status = "okay";
355 };
357 &uart3 {
358 pinctrl-names = "default";
359 pinctrl-0 = <&pinctrl_uart3>;
360 uart-has-rtscts;
361 status = "okay";
362 };
364 &uart4 {
365 pinctrl-names = "default";
366 pinctrl-0 = <&pinctrl_uart4>;
367 status = "okay";
368 };
370 &usbh1 {
371 pinctrl-names = "default";
372 pinctrl-0 = <&pinctrl_usbhub>;
373 vbus-supply = <®_usb_h1_vbus>;
374 reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
375 status = "okay";
376 };
378 &usbotg {
379 vbus-supply = <®_usb_otg_vbus>;
380 pinctrl-names = "default";
381 pinctrl-0 = <&pinctrl_usbotg>;
382 disable-over-current;
383 status = "okay";
384 };
386 &usdhc2 {
387 pinctrl-names = "default";
388 pinctrl-0 = <&pinctrl_usdhc2>;
389 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
390 no-1-8-v;
391 keep-power-in-suspend;
392 wakeup-source;
393 status = "okay";
394 };
396 &usdhc3 {
397 pinctrl-names = "default";
398 pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
399 bus-width = <8>;
400 vmmc-supply = <&vdd_bperi>;
401 non-removable;
402 keep-power-in-suspend;
403 status = "okay";
404 };
406 &wdog1 {
407 pinctrl-names = "default";
408 pinctrl-0 = <&pinctrl_wdog>;
409 fsl,ext-reset-output;
410 };
412 &iomuxc {
413 pinctrl-names = "default";
414 pinctrl-0 = <&pinctrl_hog>;
416 pinctrl_audmux: audmuxgrp {
417 fsl,pins = <
418 MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
419 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
420 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
421 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
422 >;
423 };
425 pinctrl_display: dispgrp {
426 fsl,pins = <
427 /* BLEN_OUT */
428 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
429 /* LVDS_PPEN_OUT */
430 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
431 >;
432 };
434 pinctrl_ecspi1: ecspi1grp {
435 fsl,pins = <
436 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
437 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
438 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
439 /* SPI1 CS */
440 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
441 >;
442 };
444 pinctrl_ecspi5: ecspi5grp {
445 fsl,pins = <
446 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0
447 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0
448 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0
449 MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
450 >;
451 };
453 pinctrl_enet: enetgrp {
454 fsl,pins = <
455 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
456 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
457 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
458 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
459 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
460 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
461 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
462 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
463 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
464 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
465 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
466 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
467 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
468 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
469 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
470 /* FEC Reset */
471 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
472 /* AR8033 Interrupt */
473 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
474 >;
475 };
477 pinctrl_hog: hoggrp {
478 fsl,pins = <
479 /* GPIO 0-7 */
480 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
481 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
482 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
483 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
484 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
485 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0
486 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
487 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
488 /* SUS_S3_OUT to CPLD */
489 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
490 >;
491 };
493 pinctrl_i2c1: i2c1grp {
494 fsl,pins = <
495 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
496 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
497 >;
498 };
500 pinctrl_i2c2: i2c2grp {
501 fsl,pins = <
502 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
503 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
504 >;
505 };
507 pinctrl_i2c3: i2c3grp {
508 fsl,pins = <
509 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
510 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
511 >;
512 };
514 pinctrl_pcie: pciegrp {
515 fsl,pins = <
516 /* PCIe Reset */
517 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
518 /* PCIe Wake */
519 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
520 >;
521 };
523 pinctrl_pmic: pmicgrp {
524 fsl,pins = <
525 /* PMIC Interrupt */
526 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
527 >;
528 };
530 pinctrl_pwm1: pwm1grp {
531 fsl,pins = <
532 MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
533 >;
534 };
536 pinctrl_pwm2: pwm2grp {
537 fsl,pins = <
538 MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
539 >;
540 };
542 pinctrl_rtc: rtcgrp {
543 fsl,pins = <
544 /* RTC_INT */
545 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
546 >;
547 };
549 pinctrl_uart3: uart3grp {
550 fsl,pins = <
551 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
552 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
553 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
554 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
555 >;
556 };
558 pinctrl_uart4: uart4grp {
559 fsl,pins = <
560 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
561 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
562 >;
563 };
565 pinctrl_usbhub: usbhubgrp {
566 fsl,pins = <
567 /* HUB_RESET */
568 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0
569 >;
570 };
572 pinctrl_usbotg: usbotggrp {
573 fsl,pins = <
574 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
575 >;
576 };
578 pinctrl_usdhc2: usdhc2grp {
579 fsl,pins = <
580 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
581 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
582 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
583 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
584 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
585 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
586 /* uSDHC2 CD */
587 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
588 >;
589 };
591 pinctrl_usdhc3: usdhc3grp {
592 fsl,pins = <
593 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
594 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
595 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
596 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
597 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
598 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
599 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
600 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
601 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
602 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
603 >;
604 };
606 pinctrl_usdhc3_reset: usdhc3grp-reset {
607 fsl,pins = <
608 MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
609 >;
610 };
612 pinctrl_usdhc4: usdhc4grp {
613 fsl,pins = <
614 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
615 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
616 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
617 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
618 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
619 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
620 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
621 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
622 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
623 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
624 /* uSDHC4 CD */
625 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
626 /* uSDHC4 SDIO PWR */
627 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
628 /* uSDHC4 SDIO WP */
629 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
630 /* uSDHC4 SDIO LED */
631 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
632 >;
633 };
635 pinctrl_wdog: wdoggrp {
636 fsl,pins = <
637 MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
638 >;
639 };
640 };