arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 /*
   3  * Copyright (C) 2016-2017 Zodiac Inflight Innovations
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/sound/fsl-imx-audmux.h>
   8
   9 / {
  10         chosen {
  11                 stdout-path = &uart1;
  12         };
  13
  14         aliases {
  15                 mdio-gpio0 = &mdio1;
  16                 rtc0 = &ds1341;
  17         };
  18
  19         mdio1: mdio {
  20                 compatible = "virtual,mdio-gpio";
  21                 #address-cells = <1>;
  22                 #size-cells = <0>;
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&pinctrl_mdio1>;
  25                 gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
  26                          &gpio6 4 GPIO_ACTIVE_HIGH>;
  27
  28                 phy: ethernet-phy@0 {
  29                         pinctrl-0 = <&pinctrl_rmii_phy_irq>;
  30                         pinctrl-names = "default";
  31                         reg = <0>;
  32                         interrupt-parent = <&gpio3>;
  33                         interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
  34                 };
  35         };
  36
  37         reg_28p0v: regulator-28p0v {
  38                 compatible = "regulator-fixed";
  39                 regulator-name = "28V_IN";
  40                 regulator-min-microvolt = <28000000>;
  41                 regulator-max-microvolt = <28000000>;
  42                 regulator-always-on;
  43         };
  44
  45         reg_12p0v: regulator-12p0v {
  46                 compatible = "regulator-fixed";
  47                 vin-supply = <&reg_28p0v>;
  48                 regulator-name = "12V_MAIN";
  49                 regulator-min-microvolt = <12000000>;
  50                 regulator-max-microvolt = <12000000>;
  51                 regulator-always-on;
  52         };
  53
  54         reg_5p0v_main: regulator-5p0v-main {
  55                 compatible = "regulator-fixed";
  56                 vin-supply = <&reg_12p0v>;
  57                 regulator-name = "5V_MAIN";
  58                 regulator-min-microvolt = <5000000>;
  59                 regulator-max-microvolt = <5000000>;
  60                 regulator-always-on;
  61         };
  62
  63         reg_3p3v_pmic: regulator-3p3v-pmic {
  64                 compatible = "regulator-fixed";
  65                 vin-supply = <&reg_12p0v>;
  66                 regulator-name = "PMIC_3V3";
  67                 regulator-min-microvolt = <3300000>;
  68                 regulator-max-microvolt = <3300000>;
  69                 regulator-always-on;
  70         };
  71
  72         reg_3p3v: regulator-3p3v {
  73                 compatible = "regulator-fixed";
  74                 vin-supply = <&reg_3p3v_pmic>;
  75                 regulator-name = "GEN_3V3";
  76                 regulator-min-microvolt = <3300000>;
  77                 regulator-max-microvolt = <3300000>;
  78                 regulator-always-on;
  79         };
  80
  81         reg_3p3v_sd: regulator-3p3v-sd {
  82                 compatible = "regulator-fixed";
  83                 pinctrl-names = "default";
  84                 pinctrl-0 = <&pinctrl_reg_3p3v_sd>;
  85                 vin-supply = <&reg_3p3v>;
  86                 regulator-name = "3V3_SD";
  87                 regulator-min-microvolt = <3300000>;
  88                 regulator-max-microvolt = <3300000>;
  89                 gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
  90                 startup-delay-us = <1000>;
  91                 enable-active-high;
  92                 regulator-always-on;
  93         };
  94
  95         reg_3p3v_display: regulator-3p3v-display {
  96                 compatible = "regulator-fixed";
  97                 vin-supply = <&reg_12p0v>;
  98                 regulator-name = "3V3_DISPLAY";
  99                 regulator-min-microvolt = <3300000>;
 100                 regulator-max-microvolt = <3300000>;
 101                 regulator-always-on;
 102         };
 103
 104         reg_3p3v_ssd: regulator-3p3v-ssd {
 105                 compatible = "regulator-fixed";
 106                 vin-supply = <&reg_12p0v>;
 107                 regulator-name = "3V3_SSD";
 108                 regulator-min-microvolt = <3300000>;
 109                 regulator-max-microvolt = <3300000>;
 110                 regulator-always-on;
 111         };
 112
 113         sound1 {
 114                 compatible = "simple-audio-card";
 115                 simple-audio-card,name = "Front";
 116                 simple-audio-card,format = "i2s";
 117                 simple-audio-card,bitclock-master = <&sound1_codec>;
 118                 simple-audio-card,frame-master = <&sound1_codec>;
 119                 simple-audio-card,widgets =
 120                         "Headphone", "Headphone Jack";
 121                 simple-audio-card,routing =
 122                         "Headphone Jack", "HPLEFT",
 123                         "Headphone Jack", "HPRIGHT",
 124                         "LEFTIN", "HPL",
 125                         "RIGHTIN", "HPR";
 126                 simple-audio-card,aux-devs = <&hpa1>;
 127
 128                 sound1_cpu: simple-audio-card,cpu {
 129                         sound-dai = <&ssi2>;
 130                 };
 131
 132                 sound1_codec: simple-audio-card,codec {
 133                         sound-dai = <&codec1>;
 134                         clocks = <&cs2000>;
 135                 };
 136         };
 137
 138         sound2 {
 139                 compatible = "simple-audio-card";
 140                 simple-audio-card,name = "Back";
 141                 simple-audio-card,format = "i2s";
 142                 simple-audio-card,bitclock-master = <&sound2_codec>;
 143                 simple-audio-card,frame-master = <&sound2_codec>;
 144                 simple-audio-card,widgets =
 145                         "Headphone", "Headphone Jack";
 146                 simple-audio-card,routing =
 147                         "Headphone Jack", "HPLEFT",
 148                         "Headphone Jack", "HPRIGHT",
 149                         "LEFTIN", "HPL",
 150                         "RIGHTIN", "HPR";
 151                 simple-audio-card,aux-devs = <&hpa2>;
 152
 153                 sound2_cpu: simple-audio-card,cpu {
 154                         sound-dai = <&ssi1>;
 155                 };
 156
 157                 sound2_codec: simple-audio-card,codec {
 158                         sound-dai = <&codec2>;
 159                         clocks = <&cs2000>;
 160                 };
 161         };
 162
 163         panel {
 164                 power-supply = <&reg_3p3v_display>;
 165                 backlight = <&sp_backlight>;
 166                 status = "disabled";
 167
 168                 port {
 169                         panel_in: endpoint {
 170                                 remote-endpoint = <&lvds0_out>;
 171                         };
 172                 };
 173         };
 174
 175         disp0: disp0 {
 176                 #address-cells = <1>;
 177                 #size-cells = <0>;
 178                 compatible = "fsl,imx-parallel-display";
 179                 pinctrl-names = "default";
 180                 pinctrl-0 = <&pinctrl_disp0>;
 181                 status = "disabled";
 182
 183                 port@0 {
 184                         reg = <0>;
 185
 186                         disp0_in_0: endpoint {
 187                                 remote-endpoint = <&ipu1_di0_disp0>;
 188                         };
 189                 };
 190
 191                 port@1 {
 192                         reg = <1>;
 193
 194                         disp0_out: endpoint {
 195                                 remote-endpoint = <&tc358767_in>;
 196                         };
 197                 };
 198         };
 199
 200         cs2000_ref: cs2000-ref {
 201                 compatible = "fixed-clock";
 202                 #clock-cells = <0>;
 203                 clock-frequency = <24576000>;
 204         };
 205
 206         cs2000_in_dummy: cs2000-in-dummy {
 207                 compatible = "fixed-clock";
 208                 #clock-cells = <0>;
 209                 clock-frequency = <0>;
 210         };
 211
 212         edp_refclk: edp-refclk {
 213                 compatible = "fixed-clock";
 214                 #clock-cells = <0>;
 215                 clock-frequency = <19200000>;
 216         };
 217 };
 218
 219 &clks {
 220         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 221                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 222         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
 223                                  <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
 224 };
 225
 226 &cpu0 {
 227         fsl,soc-operating-points = <
 228                 /* ARM kHz  SOC-PU uV */
 229                 1200000 1300000
 230                 996000  1275000
 231                 852000  1275000
 232                 792000  1200000
 233                 396000  1200000
 234         >;
 235 };
 236
 237 &reg_arm {
 238         vin-supply = <&sw1a_reg>;
 239 };
 240
 241 &reg_pu {
 242         vin-supply = <&sw1c_reg>;
 243 };
 244
 245 &reg_soc {
 246         vin-supply = <&sw1c_reg>;
 247 };
 248
 249 &ldb {
 250         lvds-channel@0 {
 251                 port@4 {
 252                         reg = <4>;
 253
 254                         lvds0_out: endpoint {
 255                                 remote-endpoint = <&panel_in>;
 256                         };
 257                 };
 258         };
 259 };
 260
 261 &uart1 {
 262         pinctrl-names = "default";
 263         pinctrl-0 = <&pinctrl_uart1>;
 264         status = "okay";
 265 };
 266
 267 &uart3 {
 268         pinctrl-names = "default";
 269         pinctrl-0 = <&pinctrl_uart3>;
 270         uart-has-rtscts;
 271         linux,rs485-enabled-at-boot-time;
 272         status = "okay";
 273 };
 274
 275 &uart4 {
 276         pinctrl-names = "default";
 277         pinctrl-0 = <&pinctrl_uart4>;
 278         status = "okay";
 279
 280         rave-sp {
 281                 compatible = "zii,rave-sp-rdu2";
 282                 current-speed = <1000000>;
 283                 #address-cells = <1>;
 284                 #size-cells = <1>;
 285
 286                 watchdog {
 287                         compatible = "zii,rave-sp-watchdog";
 288                 };
 289
 290                 sp_backlight: backlight {
 291                         compatible = "zii,rave-sp-backlight";
 292                 };
 293
 294                 pwrbutton {
 295                         compatible = "zii,rave-sp-pwrbutton";
 296                 };
 297
 298                 eeprom@a3 {
 299                         compatible = "zii,rave-sp-eeprom";
 300                         reg = <0xa3 0x4000>;
 301                         #address-cells = <1>;
 302                         #size-cells = <1>;
 303                         zii,eeprom-name = "dds-eeprom";
 304                 };
 305
 306                 eeprom@a4 {
 307                         compatible = "zii,rave-sp-eeprom";
 308                         reg = <0xa4 0x4000>;
 309                         #address-cells = <1>;
 310                         #size-cells = <1>;
 311                         zii,eeprom-name = "main-eeprom";
 312                 };
 313         };
 314 };
 315
 316 &ecspi1 {
 317         pinctrl-names = "default";
 318         pinctrl-0 = <&pinctrl_ecspi1>;
 319         cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
 320         status = "okay";
 321
 322         flash@0 {
 323                 compatible = "st,m25p128", "jedec,spi-nor";
 324                 spi-max-frequency = <20000000>;
 325                 reg = <0>;
 326         };
 327 };
 328
 329 &gpio3 {
 330         pinctrl-names = "default";
 331         pinctrl-0 = <&pinctrl_gpio3_hog>;
 332
 333         usb-emulation-hog {
 334                 gpio-hog;
 335                 gpios = <19 GPIO_ACTIVE_HIGH>;
 336                 output-low;
 337                 line-name = "usb-emulation";
 338         };
 339
 340         usb-mode1-hog {
 341                 gpio-hog;
 342                 gpios = <20 GPIO_ACTIVE_HIGH>;
 343                 output-high;
 344                 line-name = "usb-mode1";
 345         };
 346
 347         usb-pwr-hog {
 348                 gpio-hog;
 349                 gpios = <22 GPIO_ACTIVE_LOW>;
 350                 output-high;
 351                 line-name = "usb-pwr-ctrl-en-n";
 352         };
 353
 354         usb-mode2-hog {
 355                 gpio-hog;
 356                 gpios = <23 GPIO_ACTIVE_HIGH>;
 357                 output-high;
 358                 line-name = "usb-mode2";
 359         };
 360 };
 361
 362 &i2c1 {
 363         pinctrl-names = "default";
 364         pinctrl-0 = <&pinctrl_i2c1>;
 365         clock-frequency = <100000>;
 366         status = "okay";
 367
 368         codec2: codec@18 {
 369                 compatible = "ti,tlv320dac3100";
 370                 pinctrl-names = "default";
 371                 pinctrl-0 = <&pinctrl_codec2>;
 372                 reg = <0x18>;
 373                 #sound-dai-cells = <0>;
 374                 HPVDD-supply = <&reg_3p3v>;
 375                 SPRVDD-supply = <&reg_3p3v>;
 376                 SPLVDD-supply = <&reg_3p3v>;
 377                 AVDD-supply = <&reg_3p3v>;
 378                 IOVDD-supply = <&reg_3p3v>;
 379                 DVDD-supply = <&vgen4_reg>;
 380                 reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 381         };
 382
 383         accel@1c {
 384                 pinctrl-names = "default";
 385                 pinctrl-0 = <&pinctrl_accel>;
 386                 compatible = "fsl,mma8451";
 387                 reg = <0x1c>;
 388                 interrupt-parent = <&gpio1>;
 389                 interrupt-names = "INT2";
 390                 interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 391                 vdd-supply = <&reg_3p3v>;
 392                 vddio-supply = <&reg_3p3v>;
 393         };
 394
 395         hpa2: amp@60 {
 396                 compatible = "ti,tpa6130a2";
 397                 pinctrl-names = "default";
 398                 pinctrl-0 = <&pinctrl_tpa2>;
 399                 reg = <0x60>;
 400                 power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 401                 Vdd-supply = <&reg_5p0v_main>;
 402         };
 403
 404         edp-bridge@68 {
 405                 compatible = "toshiba,tc358767";
 406                 pinctrl-names = "default";
 407                 pinctrl-0 = <&pinctrl_tc358767>;
 408                 reg = <0x68>;
 409                 shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 410                 clock-names = "ref";
 411                 clocks = <&edp_refclk>;
 412                 status = "disabled";
 413
 414                 ports {
 415                         #address-cells = <1>;
 416                         #size-cells = <0>;
 417
 418                         port@1 {
 419                                 reg = <1>;
 420
 421                                 tc358767_in: endpoint {
 422                                         remote-endpoint = <&disp0_out>;
 423                                 };
 424                         };
 425                 };
 426         };
 427 };
 428
 429 &i2c2 {
 430         pinctrl-names = "default";
 431         pinctrl-0 = <&pinctrl_i2c2>;
 432         clock-frequency = <100000>;
 433         status = "okay";
 434
 435         pmic@8 {
 436                 compatible = "fsl,pfuze100";
 437                 pinctrl-names = "default";
 438                 pinctrl-0 = <&pinctrl_pfuze100_irq>;
 439                 reg = <0x08>;
 440                 interrupt-parent = <&gpio7>;
 441                 interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 442
 443                 regulators {
 444                         sw1a_reg: sw1ab {
 445                                 regulator-min-microvolt = <300000>;
 446                                 regulator-max-microvolt = <1875000>;
 447                                 regulator-boot-on;
 448                                 regulator-always-on;
 449                                 regulator-ramp-delay = <6250>;
 450                         };
 451
 452                         sw1c_reg: sw1c {
 453                                 regulator-min-microvolt = <300000>;
 454                                 regulator-max-microvolt = <1875000>;
 455                                 regulator-boot-on;
 456                                 regulator-always-on;
 457                                 regulator-ramp-delay = <6250>;
 458                         };
 459
 460                         sw2_reg: sw2 {
 461                                 regulator-min-microvolt = <800000>;
 462                                 regulator-max-microvolt = <3000000>;
 463                                 regulator-boot-on;
 464                                 regulator-always-on;
 465                         };
 466
 467                         sw3a_reg: sw3a {
 468                                 regulator-min-microvolt = <400000>;
 469                                 regulator-max-microvolt = <1500000>;
 470                                 regulator-boot-on;
 471                                 regulator-always-on;
 472                         };
 473
 474                         sw3b_reg: sw3b {
 475                                 regulator-min-microvolt = <400000>;
 476                                 regulator-max-microvolt = <1500000>;
 477                                 regulator-boot-on;
 478                                 regulator-always-on;
 479                         };
 480
 481                         sw4_reg: sw4 {
 482                                 regulator-min-microvolt = <800000>;
 483                                 regulator-max-microvolt = <1800000>;
 484                                 regulator-boot-on;
 485                                 regulator-always-on;
 486                         };
 487
 488                         snvs_reg: vsnvs {
 489                                 regulator-min-microvolt = <1000000>;
 490                                 regulator-max-microvolt = <3000000>;
 491                                 regulator-boot-on;
 492                                 regulator-always-on;
 493                         };
 494
 495                         vref_reg: vrefddr {
 496                                 regulator-boot-on;
 497                                 regulator-always-on;
 498                         };
 499
 500                         vgen2_reg: vgen2 {
 501                                 regulator-min-microvolt = <1000000>;
 502                                 regulator-max-microvolt = <1500000>;
 503                                 regulator-always-on;
 504                         };
 505
 506                         vgen4_reg: vgen4 {
 507                                 regulator-min-microvolt = <1200000>;
 508                                 regulator-max-microvolt = <1800000>;
 509                                 regulator-always-on;
 510                         };
 511
 512                         vgen5_reg: vgen5 {
 513                                 regulator-min-microvolt = <1800000>;
 514                                 regulator-max-microvolt = <2500000>;
 515                                 regulator-always-on;
 516                         };
 517
 518                         vgen6_reg: vgen6 {
 519                                 regulator-min-microvolt = <1800000>;
 520                                 regulator-max-microvolt = <2800000>;
 521                                 regulator-always-on;
 522                         };
 523                 };
 524         };
 525
 526         watchdog@38 {
 527                 compatible = "zii,rave-wdt";
 528                 reg = <0x38>;
 529         };
 530
 531         temp-sense@48 {
 532                 compatible = "national,lm75";
 533                 reg = <0x48>;
 534         };
 535
 536         cs2000: clkgen@4e {
 537                 compatible = "cirrus,cs2000-cp";
 538                 reg = <0x4e>;
 539                 #clock-cells = <0>;
 540                 clock-names = "clk_in", "ref_clk";
 541                 clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
 542                 assigned-clocks = <&cs2000>;
 543                 assigned-clock-rates = <24000000>;
 544         };
 545
 546         eeprom@54 {
 547                 compatible = "atmel,24c128";
 548                 reg = <0x54>;
 549         };
 550
 551         ds1341: rtc@68 {
 552                 compatible = "dallas,ds1341";
 553                 reg = <0x68>;
 554         };
 555 };
 556
 557 &i2c3 {
 558         pinctrl-names = "default";
 559         pinctrl-0 = <&pinctrl_i2c3>;
 560         clock-frequency = <400000>;
 561         status = "okay";
 562
 563         codec1: codec@18 {
 564                 compatible = "ti,tlv320dac3100";
 565                 pinctrl-names = "default";
 566                 pinctrl-0 = <&pinctrl_codec1>;
 567                 reg = <0x18>;
 568                 #sound-dai-cells = <0>;
 569                 HPVDD-supply = <&reg_3p3v>;
 570                 SPRVDD-supply = <&reg_3p3v>;
 571                 SPLVDD-supply = <&reg_3p3v>;
 572                 AVDD-supply = <&reg_3p3v>;
 573                 IOVDD-supply = <&reg_3p3v>;
 574                 DVDD-supply = <&vgen4_reg>;
 575                 reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 576         };
 577
 578         touchscreen@20 {
 579                 compatible = "syna,rmi4-i2c";
 580                 pinctrl-names = "default";
 581                 pinctrl-0 = <&pinctrl_ts>;
 582                 reg = <0x20>;
 583                 interrupt-parent = <&gpio1>;
 584                 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 585                 vdd-supply = <&reg_5p0v_main>;
 586                 vio-supply = <&reg_3p3v>;
 587
 588                 #address-cells = <1>;
 589                 #size-cells = <0>;
 590
 591                 rmi4-f01@1 {
 592                         reg = <0x1>;
 593                         syna,nosleep-mode = <2>;
 594                 };
 595
 596                 rmi4-f11@11 {
 597                         reg = <0x11>;
 598                         touchscreen-inverted-x;
 599                         touchscreen-swapped-x-y;
 600                         syna,sensor-type = <1>;
 601                 };
 602
 603                 rmi4-f12@12 {
 604                         reg = <0x12>;
 605                         touchscreen-inverted-x;
 606                         touchscreen-swapped-x-y;
 607                         syna,sensor-type = <1>;
 608                 };
 609         };
 610
 611         touchscreen@2a {
 612                 compatible = "eeti,exc3000";
 613                 pinctrl-names = "default";
 614                 pinctrl-0 = <&pinctrl_ts>;
 615                 reg = <0x2a>;
 616                 interrupt-parent = <&gpio1>;
 617                 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 618                 touchscreen-inverted-x;
 619                 touchscreen-swapped-x-y;
 620                 status = "disabled";
 621         };
 622
 623         reg_5p0v_user_usb: charger@32 {
 624                 compatible = "microchip,ucs1002";
 625                 pinctrl-names = "default";
 626                 pinctrl-0 = <&pinctrl_ucs1002_pins>;
 627                 reg = <0x32>;
 628                 interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
 629                                       <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
 630                 interrupt-names = "a_det", "alert";
 631         };
 632
 633         hpa1: amp@60 {
 634                 compatible = "ti,tpa6130a2";
 635                 pinctrl-names = "default";
 636                 pinctrl-0 = <&pinctrl_tpa1>;
 637                 reg = <0x60>;
 638                 power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 639                 Vdd-supply = <&reg_5p0v_main>;
 640         };
 641 };
 642
 643 &ipu1_di0_disp0 {
 644         remote-endpoint = <&disp0_in_0>;
 645 };
 646
 647 &pcie {
 648         pinctrl-names = "default";
 649         pinctrl-0 = <&pinctrl_pcie>;
 650         reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 651         status = "okay";
 652
 653         host@0 {
 654                 reg = <0 0 0 0 0>;
 655
 656                 #address-cells = <3>;
 657                 #size-cells = <2>;
 658
 659                 i210: i210@0 {
 660                         reg = <0 0 0 0 0>;
 661                 };
 662         };
 663 };
 664
 665 &usdhc2 {
 666         pinctrl-names = "default";
 667         pinctrl-0 = <&pinctrl_usdhc2>;
 668         bus-width = <4>;
 669         cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 670         disable-wp;
 671         vmmc-supply = <&reg_3p3v_sd>;
 672         vqmmc-supply = <&reg_3p3v>;
 673         no-1-8-v;
 674         no-sdio;
 675         status = "okay";
 676 };
 677
 678 &usdhc3 {
 679         pinctrl-names = "default";
 680         pinctrl-0 = <&pinctrl_usdhc3>;
 681         bus-width = <4>;
 682         cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 683         disable-wp;
 684         vmmc-supply = <&reg_3p3v_sd>;
 685         vqmmc-supply = <&reg_3p3v>;
 686         no-1-8-v;
 687         no-sdio;
 688         status = "okay";
 689 };
 690
 691 &usdhc4 {
 692         pinctrl-names = "default";
 693         pinctrl-0 = <&pinctrl_usdhc4>;
 694         bus-width = <8>;
 695         vmmc-supply = <&reg_3p3v>;
 696         vqmmc-supply = <&reg_3p3v>;
 697         no-1-8-v;
 698         non-removable;
 699         no-sdio;
 700         no-sd;
 701         status = "okay";
 702 };
 703
 704 &sata {
 705         target-supply = <&reg_3p3v_ssd>;
 706         status = "okay";
 707 };
 708
 709 &fec {
 710         pinctrl-names = "default";
 711         pinctrl-0 = <&pinctrl_enet>;
 712         phy-mode = "rmii";
 713         phy-handle = <&phy>;
 714         phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 715         phy-reset-duration = <100>;
 716         phy-supply = <&reg_3p3v>;
 717         status = "okay";
 718
 719         mdio {
 720                 #address-cells = <1>;
 721                 #size-cells = <0>;
 722                 clock-frequency = <12500000>;
 723                 suppress-preamble;
 724                 status = "okay";
 725
 726                 switch: switch@0 {
 727                         compatible = "marvell,mv88e6085";
 728                         pinctrl-0 = <&pinctrl_switch_irq>;
 729                         pinctrl-names = "default";
 730                         reg = <0>;
 731                         dsa,member = <0 0>;
 732                         eeprom-length = <512>;
 733                         interrupt-parent = <&gpio6>;
 734                         interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 735                         interrupt-controller;
 736                         #interrupt-cells = <2>;
 737
 738                         ports {
 739                                 #address-cells = <1>;
 740                                 #size-cells = <0>;
 741
 742                                 port@0 {
 743                                         reg = <0>;
 744                                         label = "gigabit_proc";
 745                                         phy-handle = <&switchphy0>;
 746                                 };
 747
 748                                 port@1 {
 749                                         reg = <1>;
 750                                         label = "netaux";
 751                                         phy-handle = <&switchphy1>;
 752                                 };
 753
 754                                 port@2 {
 755                                         reg = <2>;
 756                                         label = "cpu";
 757                                         ethernet = <&fec>;
 758
 759                                         fixed-link {
 760                                                 speed = <100>;
 761                                                 full-duplex;
 762                                         };
 763                                 };
 764
 765                                 port@3 {
 766                                         reg = <3>;
 767                                         label = "netright";
 768                                         phy-handle = <&switchphy3>;
 769                                 };
 770
 771                                 port@4 {
 772                                         reg = <4>;
 773                                         label = "netleft";
 774                                         phy-handle = <&switchphy4>;
 775                                 };
 776                         };
 777
 778                         mdio {
 779                                 #address-cells = <1>;
 780                                 #size-cells = <0>;
 781
 782                                 switchphy0: switchphy@0 {
 783                                         reg = <0>;
 784                                         interrupt-parent = <&switch>;
 785                                         interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 786                                 };
 787
 788                                 switchphy1: switchphy@1 {
 789                                         reg = <1>;
 790                                         interrupt-parent = <&switch>;
 791                                         interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 792                                 };
 793
 794                                 switchphy2: switchphy@2 {
 795                                         reg = <2>;
 796                                         interrupt-parent = <&switch>;
 797                                         interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 798                                 };
 799
 800                                 switchphy3: switchphy@3 {
 801                                         reg = <3>;
 802                                         interrupt-parent = <&switch>;
 803                                         interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 804                                 };
 805
 806                                 switchphy4: switchphy@4 {
 807                                         reg = <4>;
 808                                         interrupt-parent = <&switch>;
 809                                         interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 810                                 };
 811                         };
 812                 };
 813         };
 814 };
 815
 816 &usbh1 {
 817         vbus-supply = <&reg_5p0v_main>;
 818         disable-over-current;
 819         maximum-speed = "full-speed";
 820         status = "okay";
 821 };
 822
 823 &usbotg {
 824         vbus-supply = <&reg_5p0v_user_usb>;
 825         disable-over-current;
 826         dr_mode = "host";
 827         status = "okay";
 828 };
 829
 830 &snvs_rtc {
 831         status = "disabled";
 832 };
 833
 834 &ssi1 {
 835         status = "okay";
 836 };
 837
 838 &ssi2 {
 839         status = "okay";
 840 };
 841
 842 &audmux {
 843         pinctrl-names = "default";
 844         pinctrl-0 = <&pinctrl_audmux>;
 845         status = "okay";
 846
 847         ssi1 {
 848                 fsl,audmux-port = <0>;
 849                 fsl,port-config = <
 850                         (IMX_AUDMUX_V2_PTCR_SYN |
 851                          IMX_AUDMUX_V2_PTCR_TFSEL(2) |
 852                          IMX_AUDMUX_V2_PTCR_TCSEL(2) |
 853                          IMX_AUDMUX_V2_PTCR_TFSDIR |
 854                          IMX_AUDMUX_V2_PTCR_TCLKDIR)
 855                         IMX_AUDMUX_V2_PDCR_RXDSEL(2)
 856                 >;
 857         };
 858
 859         aud3 {
 860                 fsl,audmux-port = <2>;
 861                 fsl,port-config = <
 862                         IMX_AUDMUX_V2_PTCR_SYN
 863                         IMX_AUDMUX_V2_PDCR_RXDSEL(0)
 864                 >;
 865         };
 866
 867         ssi2 {
 868                 fsl,audmux-port = <1>;
 869                 fsl,port-config = <
 870                         (IMX_AUDMUX_V2_PTCR_SYN |
 871                          IMX_AUDMUX_V2_PTCR_TFSEL(4) |
 872                          IMX_AUDMUX_V2_PTCR_TCSEL(4) |
 873                          IMX_AUDMUX_V2_PTCR_TFSDIR |
 874                          IMX_AUDMUX_V2_PTCR_TCLKDIR)
 875                         IMX_AUDMUX_V2_PDCR_RXDSEL(4)
 876                 >;
 877         };
 878
 879         aud5 {
 880                 fsl,audmux-port = <4>;
 881                 fsl,port-config = <
 882                         IMX_AUDMUX_V2_PTCR_SYN
 883                         IMX_AUDMUX_V2_PDCR_RXDSEL(1)
 884                 >;
 885         };
 886 };
 887
 888 &wdog1 {
 889         status = "disabled";
 890 };
 891
 892 &iomuxc {
 893         pinctrl_accel: accelgrp {
 894                 fsl,pins = <
 895                         MX6QDL_PAD_SD1_CLK__GPIO1_IO20          0x4001b000
 896                 >;
 897         };
 898
 899         pinctrl_audmux: audmuxgrp {
 900                 fsl,pins = <
 901                         MX6QDL_PAD_KEY_COL0__AUD5_TXC           0x130b0
 902                         MX6QDL_PAD_KEY_ROW0__AUD5_TXD           0x130b0
 903                         MX6QDL_PAD_KEY_COL1__AUD5_TXFS          0x130b0
 904                         MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 905                         MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x130b0
 906                         MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 907                 >;
 908         };
 909
 910         pinctrl_codec1: dac1grp {
 911                 fsl,pins = <
 912                         MX6QDL_PAD_GPIO_0__GPIO1_IO00           0x40000038
 913                 >;
 914         };
 915
 916         pinctrl_codec2: dac2grp {
 917                 fsl,pins = <
 918                         MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x40000038
 919                 >;
 920         };
 921
 922         pinctrl_disp0: disp0grp {
 923                 fsl,pins = <
 924                         MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9
 925                         MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x100f9
 926                         MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x100f9
 927                         MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x100f9
 928                         MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x100f9
 929                         MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x100f9
 930                         MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x100f9
 931                         MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x100f9
 932                         MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x100f9
 933                         MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x100f9
 934                         MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x100f9
 935                         MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x100f9
 936                         MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x100f9
 937                         MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x100f9
 938                         MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x100f9
 939                         MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x100f9
 940                         MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x100f9
 941                         MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x100f9
 942                         MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x100f9
 943                         MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x100f9
 944                         MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x100f9
 945                         MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x100f9
 946                         MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x100f9
 947                         MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x100f9
 948                         MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x100f9
 949                         MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x100f9
 950                         MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x100f9
 951                         MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x100f9
 952                 >;
 953         };
 954
 955         pinctrl_ecspi1: ecspi1grp {
 956                 fsl,pins = <
 957                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 958                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 959                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 960                         MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x1b0b1
 961                 >;
 962         };
 963
 964         pinctrl_enet: enetgrp {
 965                 fsl,pins = <
 966                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x000b1
 967                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x100b1
 968                         MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x100f5
 969                         MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x100f5
 970                         MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x100c0
 971                         MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x100c0
 972                         MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x100f5
 973                         MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x100f5
 974                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x40010040
 975                         MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x100b0
 976                         MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23     0x1b0b0
 977                 >;
 978         };
 979
 980         pinctrl_gpio3_hog: gpio3hoggrp {
 981                 fsl,pins = <
 982                         MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x1b0b0
 983                         MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x1b0b0
 984                         MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0
 985                         MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x1b0b0
 986                 >;
 987         };
 988
 989         pinctrl_i2c1: i2c1grp {
 990                 fsl,pins = <
 991                         MX6QDL_PAD_CSI0_DAT8__I2C1_SDA          0x4001b8b1
 992                         MX6QDL_PAD_CSI0_DAT9__I2C1_SCL          0x4001b8b1
 993                 >;
 994         };
 995
 996         pinctrl_i2c2: i2c2grp {
 997                 fsl,pins = <
 998                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 999                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
1000                 >;
1001         };
1002
1003         pinctrl_i2c3: i2c3grp {
1004                 fsl,pins = <
1005                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
1006                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
1007                 >;
1008         };
1009
1010         pinctrl_mdio1: bitbangmdiogrp {
1011                 fsl,pins = <
1012                         /* Bitbang MDIO for DEB Switch */
1013                         MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05       0x4001b030
1014                         MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04       0x40018830
1015                 >;
1016         };
1017
1018         pinctrl_pcie: pciegrp {
1019                 fsl,pins = <
1020                         MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x10038
1021                 >;
1022         };
1023
1024         pinctrl_pfuze100_irq: pfuze100grp {
1025                 fsl,pins = <
1026                         MX6QDL_PAD_GPIO_18__GPIO7_IO13          0x40010000
1027                 >;
1028         };
1029
1030         pinctrl_reg_3p3v_sd: mmcsupply1grp {
1031                 fsl,pins = <
1032                         MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x858
1033                 >;
1034         };
1035
1036         pinctrl_rmii_phy_irq: phygrp {
1037                 fsl,pins = <
1038                         MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x40010000
1039                 >;
1040         };
1041
1042         pinctrl_switch_irq: switchgrp {
1043                 fsl,pins = <
1044                         MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03       0x4001b000
1045                 >;
1046         };
1047
1048         pinctrl_tc358767: tc358767grp {
1049                 fsl,pins = <
1050                         MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x10
1051                 >;
1052         };
1053
1054         pinctrl_tpa1: tpa6130-1grp {
1055                 fsl,pins = <
1056                         MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x40000038
1057                 >;
1058         };
1059
1060         pinctrl_tpa2: tpa6130-2grp {
1061                 fsl,pins = <
1062                         MX6QDL_PAD_GPIO_5__GPIO1_IO05           0x40000038
1063                 >;
1064         };
1065
1066         pinctrl_ts: tsgrp {
1067                 fsl,pins = <
1068                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x1b0b0
1069                         MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x1b0b0
1070                 >;
1071         };
1072
1073         pinctrl_uart1: uart1grp {
1074                 fsl,pins = <
1075                         MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA    0x1b0b1
1076                         MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
1077                 >;
1078         };
1079
1080         pinctrl_uart3: uart3grp {
1081                 fsl,pins = <
1082                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
1083                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
1084                         MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
1085                 >;
1086         };
1087
1088         pinctrl_uart4: uart4grp {
1089                 fsl,pins = <
1090                         MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
1091                         MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
1092                 >;
1093         };
1094
1095         pinctrl_ucs1002_pins: ucs1002grp {
1096                 fsl,pins = <
1097                         MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b0
1098                         MX6QDL_PAD_EIM_D21__GPIO3_IO21          0x1b0b0
1099                 >;
1100         };
1101
1102         pinctrl_usdhc2: usdhc2grp {
1103                 fsl,pins = <
1104                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x10059
1105                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10069
1106                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
1107                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
1108                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
1109                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
1110                         MX6QDL_PAD_NANDF_D2__GPIO2_IO02         0x40010040
1111                 >;
1112         };
1113
1114         pinctrl_usdhc3: usdhc3grp {
1115                 fsl,pins = <
1116                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x10059
1117                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10069
1118                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
1119                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
1120                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
1121                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
1122                         MX6QDL_PAD_NANDF_D0__GPIO2_IO00         0x40010040
1123
1124                 >;
1125         };
1126
1127         pinctrl_usdhc4: usdhc4grp {
1128                 fsl,pins = <
1129                         MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
1130                         MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
1131                         MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
1132                         MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
1133                         MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
1134                         MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
1135                         MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
1136                         MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
1137                         MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
1138                         MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
1139                         MX6QDL_PAD_NANDF_ALE__SD4_RESET         0x1b0b1
1140                 >;
1141         };
1142 };