1 // SPDX-License-Identifier: GPL-2.0
3 // Copyright (C) 2015 Freescale Semiconductor, Inc.
5 #include "imx6sx-sdb.dtsi"
8 model = "Freescale i.MX6 SoloX SDB RevA Board";
9 compatible = "fsl,imx6sx-sdb-reva", "fsl,imx6sx";
13 clock-frequency = <100000>;
14 pinctrl-names = "default";
15 pinctrl-0 = <&pinctrl_i2c1>;
19 compatible = "fsl,pfuze100";
24 regulator-min-microvolt = <300000>;
25 regulator-max-microvolt = <1875000>;
28 regulator-ramp-delay = <6250>;
32 regulator-min-microvolt = <300000>;
33 regulator-max-microvolt = <1875000>;
36 regulator-ramp-delay = <6250>;
40 regulator-min-microvolt = <800000>;
41 regulator-max-microvolt = <3300000>;
47 regulator-min-microvolt = <400000>;
48 regulator-max-microvolt = <1975000>;
54 regulator-min-microvolt = <400000>;
55 regulator-max-microvolt = <1975000>;
61 regulator-min-microvolt = <800000>;
62 regulator-max-microvolt = <3300000>;
67 regulator-min-microvolt = <5000000>;
68 regulator-max-microvolt = <5150000>;
72 regulator-min-microvolt = <1000000>;
73 regulator-max-microvolt = <3000000>;
84 regulator-min-microvolt = <800000>;
85 regulator-max-microvolt = <1550000>;
90 regulator-min-microvolt = <800000>;
91 regulator-max-microvolt = <1550000>;
95 regulator-min-microvolt = <1800000>;
96 regulator-max-microvolt = <3300000>;
101 regulator-min-microvolt = <1800000>;
102 regulator-max-microvolt = <3300000>;
107 regulator-min-microvolt = <1800000>;
108 regulator-max-microvolt = <3300000>;
113 regulator-min-microvolt = <1800000>;
114 regulator-max-microvolt = <3300000>;
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_qspi2>;
126 flash0: s25fl128s@0 {
128 #address-cells = <1>;
130 compatible = "spansion,s25fl128s", "jedec,spi-nor";
131 spi-max-frequency = <66000000>;
132 spi-rx-bus-width = <4>;
133 spi-tx-bus-width = <4>;
136 flash1: s25fl128s@2 {
138 #address-cells = <1>;
140 compatible = "spansion,s25fl128s", "jedec,spi-nor";
141 spi-max-frequency = <66000000>;
142 spi-rx-bus-width = <4>;
143 spi-tx-bus-width = <4>;
148 /* Transceiver EN/STBY is active high on RevA board */
149 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
154 gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
156 vin-supply = <®_can_en>;
160 vin-supply = <&vgen6_reg>;
164 vin-supply = <&vgen6_reg>;