1 // SPDX-License-Identifier: GPL-2.0
3 // Copyright (C) 2015 Freescale Semiconductor, Inc.
5 #include "imx6sx-sdb.dtsi"
8 model = "Freescale i.MX6 SoloX SDB RevB Board";
12 clock-frequency = <100000>;
13 pinctrl-names = "default";
14 pinctrl-0 = <&pinctrl_i2c1>;
18 compatible = "fsl,pfuze200";
23 regulator-min-microvolt = <300000>;
24 regulator-max-microvolt = <1875000>;
27 regulator-ramp-delay = <6250>;
31 regulator-min-microvolt = <800000>;
32 regulator-max-microvolt = <3300000>;
38 regulator-min-microvolt = <400000>;
39 regulator-max-microvolt = <1975000>;
45 regulator-min-microvolt = <400000>;
46 regulator-max-microvolt = <1975000>;
52 regulator-min-microvolt = <5000000>;
53 regulator-max-microvolt = <5150000>;
57 regulator-min-microvolt = <1000000>;
58 regulator-max-microvolt = <3000000>;
69 regulator-min-microvolt = <800000>;
70 regulator-max-microvolt = <1550000>;
75 regulator-min-microvolt = <800000>;
76 regulator-max-microvolt = <1550000>;
80 regulator-min-microvolt = <1800000>;
81 regulator-max-microvolt = <3300000>;
86 regulator-min-microvolt = <1800000>;
87 regulator-max-microvolt = <3300000>;
92 regulator-min-microvolt = <1800000>;
93 regulator-max-microvolt = <3300000>;
98 regulator-min-microvolt = <1800000>;
99 regulator-max-microvolt = <3300000>;
107 pinctrl-names = "default";
108 pinctrl-0 = <&pinctrl_qspi2>;
112 #address-cells = <1>;
114 compatible = "micron,n25q256a", "jedec,spi-nor";
115 spi-max-frequency = <29000000>;
116 spi-rx-bus-width = <4>;
117 spi-tx-bus-width = <4>;
122 #address-cells = <1>;
124 compatible = "micron,n25q256a", "jedec,spi-nor";
125 spi-max-frequency = <29000000>;
126 spi-rx-bus-width = <4>;
127 spi-tx-bus-width = <4>;
133 vin-supply = <&sw1a_reg>;
137 vin-supply = <&sw1a_reg>;
141 vin-supply = <&vgen6_reg>;
145 vin-supply = <&vgen6_reg>;
149 /* Transceiver EN/STBY is active low on RevB board */
150 gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;