WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / boot / dts / keystone-k2g.dtsi
blob05a75019275e266aaa76ba646a48ddee18dac845
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Device Tree Source for K2G SOC
4  *
5  * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
6  */
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
9 #include <dt-bindings/pinctrl/keystone.h>
10 #include <dt-bindings/gpio/gpio.h>
12 / {
13         compatible = "ti,k2g","ti,keystone";
14         model = "Texas Instruments K2G SoC";
15         #address-cells = <2>;
16         #size-cells = <2>;
17         interrupt-parent = <&gic>;
19         chosen { };
21         aliases {
22                 serial0 = &uart0;
23                 serial1 = &uart1;
24                 serial2 = &uart2;
25                 i2c0 = &i2c0;
26                 i2c1 = &i2c1;
27                 i2c2 = &i2c2;
28                 rproc0 = &dsp0;
29         };
31         cpus {
32                 #address-cells = <1>;
33                 #size-cells = <0>;
35                 cpu@0 {
36                         compatible = "arm,cortex-a15";
37                         device_type = "cpu";
38                         reg = <0>;
39                 };
40         };
42         gic: interrupt-controller@2561000 {
43                 compatible = "arm,gic-400", "arm,cortex-a15-gic";
44                 #interrupt-cells = <3>;
45                 interrupt-controller;
46                 reg = <0x0 0x02561000 0x0 0x1000>,
47                       <0x0 0x02562000 0x0 0x2000>,
48                       <0x0 0x02564000 0x0 0x2000>,
49                       <0x0 0x02566000 0x0 0x2000>;
50                 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
51                                 IRQ_TYPE_LEVEL_HIGH)>;
52         };
54         timer {
55                 compatible = "arm,armv7-timer";
56                 interrupts =
57                         <GIC_PPI 13
58                                 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
59                         <GIC_PPI 14
60                                 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
61                         <GIC_PPI 11
62                                 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
63                         <GIC_PPI 10
64                                 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
65         };
67         pmu {
68                 compatible = "arm,cortex-a15-pmu";
69                 interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
70         };
72         usbphy {
73                 #address-cells = <1>;
74                 #size-cells = <0>;
75                 compatible = "simple-bus";
77                 usb0_phy: usb-phy@0 {
78                         compatible = "usb-nop-xceiv";
79                         reg = <0>;
80                         status = "disabled";
81                 };
83                 usb1_phy: usb-phy@1 {
84                         compatible = "usb-nop-xceiv";
85                         reg = <1>;
86                         status = "disabled";
87                 };
88         };
90         soc0: soc@0 {
91                 #address-cells = <1>;
92                 #size-cells = <1>;
93                 #pinctrl-cells = <1>;
94                 compatible = "ti,keystone","simple-bus";
95                 ranges = <0x0 0x0 0x0 0xc0000000>;
96                 dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
98                 msm_ram: sram@c000000 {
99                         compatible = "mmio-sram";
100                         reg = <0x0c000000 0x100000>;
101                         ranges = <0x0 0x0c000000 0x100000>;
102                         #address-cells = <1>;
103                         #size-cells = <1>;
105                         bm-sram@f7000 {
106                                 reg = <0x000f7000 0x8000>;
107                         };
108                 };
110                 k2g_pinctrl: pinmux@2621000 {
111                         compatible = "pinctrl-single";
112                         reg = <0x02621000 0x410>;
113                         pinctrl-single,register-width = <32>;
114                         pinctrl-single,function-mask = <0x001b0007>;
115                 };
117                 devctrl: device-state-control@2620000 {
118                         compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
119                         reg = <0x02620000 0x1000>;
120                         #address-cells = <1>;
121                         #size-cells = <1>;
122                         ranges = <0x0 0x02620000 0x1000>;
124                         kirq0: keystone_irq@2a0 {
125                                 compatible = "ti,keystone-irq";
126                                 reg = <0x2a0 0x10>;
127                                 interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
128                                 interrupt-controller;
129                                 #interrupt-cells = <1>;
130                                 ti,syscon-dev = <&devctrl 0x2a0>;
131                         };
133                         dspgpio0: keystone_dsp_gpio@240 {
134                                 compatible = "ti,keystone-dsp-gpio";
135                                 reg = <0x240 0x4>;
136                                 gpio-controller;
137                                 #gpio-cells = <2>;
138                                 gpio,syscon-dev = <&devctrl 0x240>;
139                         };
140                 };
142                 uart0: serial@2530c00 {
143                         compatible = "ti,da830-uart", "ns16550a";
144                         current-speed = <115200>;
145                         reg-shift = <2>;
146                         reg-io-width = <4>;
147                         reg = <0x02530c00 0x100>;
148                         interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
149                         clocks = <&k2g_clks 0x2c 0>;
150                         power-domains = <&k2g_pds 0x2c>;
151                         status = "disabled";
152                 };
154                 uart1: serial@2531000 {
155                         compatible = "ti,da830-uart", "ns16550a";
156                         current-speed = <115200>;
157                         reg-shift = <2>;
158                         reg-io-width = <4>;
159                         reg = <0x02531000 0x100>;
160                         interrupts = <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>;
161                         clocks = <&k2g_clks 0x2d 0>;
162                         power-domains = <&k2g_pds 0x2d>;
163                         status = "disabled";
164                 };
166                 uart2: serial@2531400 {
167                         compatible = "ti,da830-uart", "ns16550a";
168                         current-speed = <115200>;
169                         reg-shift = <2>;
170                         reg-io-width = <4>;
171                         reg = <0x02531400 0x100>;
172                         interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
173                         clocks = <&k2g_clks 0x2e 0>;
174                         power-domains = <&k2g_pds 0x2e>;
175                         status = "disabled";
176                 };
178                 dcan0: can@260b200 {
179                         compatible = "ti,am4372-d_can", "ti,am3352-d_can";
180                         reg = <0x0260B200 0x200>;
181                         interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
182                         status = "disabled";
183                         power-domains = <&k2g_pds 0x0008>;
184                         clocks = <&k2g_clks 0x0008 1>;
185                 };
187                 dcan1: can@260b400 {
188                         compatible = "ti,am4372-d_can", "ti,am3352-d_can";
189                         reg = <0x0260B400 0x200>;
190                         interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
191                         status = "disabled";
192                         power-domains = <&k2g_pds 0x0009>;
193                         clocks = <&k2g_clks 0x0009 1>;
194                 };
196                 i2c0: i2c@2530000 {
197                         compatible = "ti,keystone-i2c";
198                         reg = <0x02530000 0x400>;
199                         clocks = <&k2g_clks 0x003a 0>;
200                         power-domains = <&k2g_pds 0x003a>;
201                         interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
202                         #address-cells = <1>;
203                         #size-cells = <0>;
204                         status = "disabled";
205                 };
207                 i2c1: i2c@2530400 {
208                         compatible = "ti,keystone-i2c";
209                         reg = <0x02530400 0x400>;
210                         clocks = <&k2g_clks 0x003b 0>;
211                         power-domains = <&k2g_pds 0x003b>;
212                         interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
213                         #address-cells = <1>;
214                         #size-cells = <0>;
215                         status = "disabled";
216                 };
218                 i2c2: i2c@2530800 {
219                         compatible = "ti,keystone-i2c";
220                         reg = <0x02530800 0x400>;
221                         clocks = <&k2g_clks 0x003c 0>;
222                         power-domains = <&k2g_pds 0x003c>;
223                         interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
224                         #address-cells = <1>;
225                         #size-cells = <0>;
226                         status = "disabled";
227                 };
229                 dsp0: dsp@10800000 {
230                         compatible = "ti,k2g-dsp";
231                         reg = <0x10800000 0x00100000>,
232                               <0x10e00000 0x00008000>,
233                               <0x10f00000 0x00008000>;
234                         reg-names = "l2sram", "l1pram", "l1dram";
235                         power-domains = <&k2g_pds 0x0046>;
236                         ti,syscon-dev = <&devctrl 0x844>;
237                         resets = <&k2g_reset 0x0046 0x1>;
238                         interrupt-parent = <&kirq0>;
239                         interrupts = <0 8>;
240                         interrupt-names = "vring", "exception";
241                         kick-gpios = <&dspgpio0 27 0>;
242                         status = "disabled";
243                 };
245                 msgmgr: msgmgr@2a00000 {
246                         compatible = "ti,k2g-message-manager";
247                         #mbox-cells = <2>;
248                         reg-names = "queue_proxy_region",
249                                     "queue_state_debug_region";
250                         reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
251                         interrupt-names = "rx_005",
252                                           "rx_057";
253                         interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
254                                      <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
255                 };
257                 pmmc: pmmc@2921c00 {
258                         compatible = "ti,k2g-sci";
259                         /*
260                          * In case of rare platforms that does not use k2g as
261                          * system master, use /delete-property/
262                          */
263                         ti,system-reboot-controller;
264                         mbox-names = "rx", "tx";
265                         mboxes= <&msgmgr 5 2>,
266                                 <&msgmgr 0 0>;
267                         reg-names = "debug_messages";
268                         reg = <0x02921c00 0x400>;
270                         k2g_pds: power-controller {
271                                 compatible = "ti,sci-pm-domain";
272                                 #power-domain-cells = <1>;
273                         };
275                         k2g_clks: clocks {
276                                 compatible = "ti,k2g-sci-clk";
277                                 #clock-cells = <2>;
278                         };
280                         k2g_reset: reset-controller {
281                                 compatible = "ti,sci-reset";
282                                 #reset-cells = <2>;
283                         };
284                 };
286                 gpio0: gpio@2603000 {
287                         compatible = "ti,k2g-gpio", "ti,keystone-gpio";
288                         reg = <0x02603000 0x100>;
289                         gpio-controller;
290                         #gpio-cells = <2>;
292                         interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
293                                         <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
294                                         <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
295                                         <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
296                                         <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
297                                         <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
298                                         <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
299                                         <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
300                                         <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
301                         interrupt-controller;
302                         #interrupt-cells = <2>;
303                         ti,ngpio = <144>;
304                         ti,davinci-gpio-unbanked = <0>;
305                         clocks = <&k2g_clks 0x001b 0x0>;
306                         clock-names = "gpio";
307                 };
309                 gpio1: gpio@260a000 {
310                         compatible = "ti,k2g-gpio", "ti,keystone-gpio";
311                         reg = <0x0260a000 0x100>;
312                         gpio-controller;
313                         #gpio-cells = <2>;
314                         interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
315                                         <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
316                                         <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
317                                         <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
318                                         <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
319                         interrupt-controller;
320                         #interrupt-cells = <2>;
321                         ti,ngpio = <68>;
322                         ti,davinci-gpio-unbanked = <0>;
323                         clocks = <&k2g_clks 0x001c 0x0>;
324                         clock-names = "gpio";
325                 };
327                 dss: dss@02540000 {
328                         compatible = "ti,k2g-dss";
329                         reg =   <0x02540000 0x400>,
330                                 <0x02550000 0x1000>,
331                                 <0x02557000 0x1000>,
332                                 <0x0255a800 0x100>,
333                                 <0x0255ac00 0x100>;
334                         reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
335                         clocks =        <&k2g_clks 0x2 0>,
336                                         <&k2g_clks 0x2 1>;
337                         clock-names = "fck", "vp1";
338                         interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
340                         power-domains = <&k2g_pds 0x2>;
341                         status = "disabled";
342                         #address-cells = <1>;
343                         #size-cells = <1>;
344                         ranges;
346                         max-memory-bandwidth = <230000000>;
347                 };
349                 edma0: edma@2700000 {
350                         compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
351                         reg =   <0x02700000 0x8000>;
352                         reg-names = "edma3_cc";
353                         interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
354                                         <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>,
355                                         <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
356                         interrupt-names = "edma3_ccint", "emda3_mperr",
357                                           "edma3_ccerrint";
358                         dma-requests = <64>;
359                         #dma-cells = <2>;
361                         ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
363                         ti,edma-memcpy-channels = <32 33 34 35>;
365                         power-domains = <&k2g_pds 0x3f>;
366                 };
368                 edma0_tptc0: tptc@2760000 {
369                         compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
370                         reg =   <0x02760000 0x400>;
371                         power-domains = <&k2g_pds 0x3f>;
372                 };
374                 edma0_tptc1: tptc@2768000 {
375                         compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
376                         reg =   <0x02768000 0x400>;
377                         power-domains = <&k2g_pds 0x3f>;
378                 };
380                 edma1: edma@2728000 {
381                         compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
382                         reg =   <0x02728000 0x8000>;
383                         reg-names = "edma3_cc";
384                         interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
385                                         <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
386                                         <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
387                         interrupt-names = "edma3_ccint", "emda3_mperr",
388                                           "edma3_ccerrint";
389                         dma-requests = <64>;
390                         #dma-cells = <2>;
392                         ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
394                         /*
395                          * memcpy is disabled, can be enabled with:
396                          * ti,edma-memcpy-channels = <12 13 14 15>;
397                          * for example.
398                          */
400                         power-domains = <&k2g_pds 0x4f>;
401                 };
403                 edma1_tptc0: tptc@27b0000 {
404                         compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
405                         reg =   <0x027b0000 0x400>;
406                         power-domains = <&k2g_pds 0x4f>;
407                 };
409                 edma1_tptc1: tptc@27b8000 {
410                         compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
411                         reg =   <0x027b8000 0x400>;
412                         power-domains = <&k2g_pds 0x4f>;
413                 };
415                 mmc0: mmc@23000000 {
416                         compatible = "ti,k2g-sdhci";
417                         reg = <0x23000000 0x400>;
418                         interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
419                         bus-width = <4>;
420                         no-1-8-v;
421                         max-frequency = <96000000>;
422                         power-domains = <&k2g_pds 0xb>;
423                         clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
424                         clock-names = "fck", "mmchsdb_fck";
425                         status = "disabled";
426                 };
428                 mmc1: mmc@23100000 {
429                         compatible = "ti,k2g-sdhci";
430                         reg = <0x23100000 0x400>;
431                         interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
432                         bus-width = <8>;
433                         no-1-8-v;
434                         non-removable;
435                         max-frequency = <96000000>;
436                         power-domains = <&k2g_pds 0xc>;
437                         clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
438                         clock-names = "fck", "mmchsdb_fck";
439                 };
441                 qspi: spi@2940000 {
442                         compatible = "ti,k2g-qspi", "cdns,qspi-nor";
443                         #address-cells = <1>;
444                         #size-cells = <0>;
445                         reg = <0x02940000 0x1000>,
446                               <0x24000000 0x4000000>;
447                         interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
448                         cdns,fifo-depth = <256>;
449                         cdns,fifo-width = <4>;
450                         cdns,trigger-address = <0x24000000>;
451                         clocks = <&k2g_clks 0x43 0x0>;
452                         power-domains = <&k2g_pds 0x43>;
453                         status = "disabled";
454                 };
456                 mcasp0: mcasp@2340000 {
457                         compatible = "ti,am33xx-mcasp-audio";
458                         reg = <0x02340000 0x2000>,
459                               <0x21804000 0x1000>;
460                         reg-names = "mpu","dat";
461                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
462                                      <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
463                         interrupt-names = "tx", "rx";
464                         dmas = <&edma0 24 1>, <&edma0 25 1>;
465                         dma-names = "tx", "rx";
466                         power-domains = <&k2g_pds 0x4>;
467                         clocks = <&k2g_clks 0x4 0>;
468                         clock-names = "fck";
469                         status = "disabled";
470                 };
472                 mcasp1: mcasp@2342000 {
473                         compatible = "ti,am33xx-mcasp-audio";
474                         reg = <0x02342000 0x2000>,
475                               <0x21804400 0x1000>;
476                         reg-names = "mpu","dat";
477                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
478                                      <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
479                         interrupt-names = "tx", "rx";
480                         dmas = <&edma1 48 1>, <&edma1 49 1>;
481                         dma-names = "tx", "rx";
482                         power-domains = <&k2g_pds 0x5>;
483                         clocks = <&k2g_clks 0x5 0>;
484                         clock-names = "fck";
485                         status = "disabled";
486                 };
488                 mcasp2: mcasp@2344000 {
489                         compatible = "ti,am33xx-mcasp-audio";
490                         reg = <0x02344000 0x2000>,
491                               <0x21804800 0x1000>;
492                         reg-names = "mpu","dat";
493                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
494                                      <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
495                         interrupt-names = "tx", "rx";
496                         dmas = <&edma1 50 1>, <&edma1 51 1>;
497                         dma-names = "tx", "rx";
498                         power-domains = <&k2g_pds 0x6>;
499                         clocks = <&k2g_clks 0x6 0>;
500                         clock-names = "fck";
501                         status = "disabled";
502                 };
504                 keystone_usb0: keystone-dwc3@2680000 {
505                         compatible = "ti,keystone-dwc3";
506                         #address-cells = <1>;
507                         #size-cells = <1>;
508                         reg = <0x2680000 0x10000>;
509                         interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
510                         ranges;
511                         dma-coherent;
512                         dma-ranges;
513                         status = "disabled";
514                         power-domains = <&k2g_pds 0x0016>;
516                         usb0: usb@2690000 {
517                                 compatible = "snps,dwc3";
518                                 reg = <0x2690000 0x10000>;
519                                 interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
520                                 maximum-speed = "high-speed";
521                                 dr_mode = "otg";
522                                 usb-phy = <&usb0_phy>;
523                                 status = "disabled";
524                         };
525                 };
527                 keystone_usb1: keystone-dwc3@2580000 {
528                         compatible = "ti,keystone-dwc3";
529                         #address-cells = <1>;
530                         #size-cells = <1>;
531                         reg = <0x2580000 0x10000>;
532                         interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
533                         ranges;
534                         dma-coherent;
535                         dma-ranges;
536                         status = "disabled";
537                         power-domains = <&k2g_pds 0x0017>;
539                         usb1: usb@2590000 {
540                                 compatible = "snps,dwc3";
541                                 reg = <0x2590000 0x10000>;
542                                 interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
543                                 maximum-speed = "high-speed";
544                                 dr_mode = "otg";
545                                 usb-phy = <&usb1_phy>;
546                                 status = "disabled";
547                         };
548                 };
550                 ecap0: pwm@21d1800 {
551                         compatible = "ti,k2g-ecap", "ti,am3352-ecap";
552                         #pwm-cells = <3>;
553                         reg = <0x021d1800 0x60>;
554                         power-domains = <&k2g_pds 0x38>;
555                         clocks = <&k2g_clks 0x38 0>;
556                         clock-names = "fck";
557                         status = "disabled";
558                 };
560                 ecap1: pwm@21d1c00 {
561                         compatible = "ti,k2g-ecap", "ti,am3352-ecap";
562                         #pwm-cells = <3>;
563                         reg = <0x021d1c00 0x60>;
564                         power-domains = <&k2g_pds 0x39>;
565                         clocks = <&k2g_clks 0x39 0x0>;
566                         clock-names = "fck";
567                         status = "disabled";
568                 };
570                 spi0: spi@21805400 {
571                         compatible = "ti,keystone-spi";
572                         reg = <0x21805400 0x200>;
573                         num-cs = <4>;
574                         ti,davinci-spi-intr-line = <0>;
575                         interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>;
576                         #address-cells = <1>;
577                         #size-cells = <0>;
578                         power-domains = <&k2g_pds 0x0010>;
579                         clocks = <&k2g_clks 0x0010 0>;
580                 };
582                 spi1: spi@21805800 {
583                         compatible = "ti,keystone-spi";
584                         reg = <0x21805800 0x200>;
585                         num-cs = <4>;
586                         ti,davinci-spi-intr-line = <0>;
587                         interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>;
588                         #address-cells = <1>;
589                         #size-cells = <0>;
590                         power-domains = <&k2g_pds 0x0011>;
591                         clocks = <&k2g_clks 0x0011 0>;
592                 };
594                 spi2: spi@21805c00 {
595                         compatible = "ti,keystone-spi";
596                         reg = <0x21805C00 0x200>;
597                         num-cs = <4>;
598                         ti,davinci-spi-intr-line = <0>;
599                         interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
600                         #address-cells = <1>;
601                         #size-cells = <0>;
602                         power-domains = <&k2g_pds 0x0012>;
603                         clocks = <&k2g_clks 0x0012 0>;
604                 };
606                 spi3: spi@21806000 {
607                         compatible = "ti,keystone-spi";
608                         reg = <0x21806000 0x200>;
609                         num-cs = <4>;
610                         ti,davinci-spi-intr-line = <0>;
611                         interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
612                         #address-cells = <1>;
613                         #size-cells = <0>;
614                         power-domains = <&k2g_pds 0x0013>;
615                         clocks = <&k2g_clks 0x0013 0>;
616                 };
618                 wdt: wdt@02250000 {
619                         compatible = "ti,keystone-wdt", "ti,davinci-wdt";
620                         reg = <0x02250000 0x80>;
621                         power-domains = <&k2g_pds 0x22>;
622                         clocks = <&k2g_clks 0x22 0>;
623                 };
625                 emif: emif@21010000 {
626                         compatible = "ti,emif-keystone";
627                         reg = <0x21010000 0x200>;
628                         interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>;
629                 };
631                 mdio: mdio@4200f00 {
632                         compatible = "ti,keystone_mdio", "ti,davinci_mdio";
633                         reg = <0x04200f00 0x100>;
634                         #address-cells = <1>;
635                         #size-cells = <0>;
636                         clocks = <&k2g_clks 0x0018 3>;
637                         clock-names = "fck";
638                         power-domains = <&k2g_pds 0x0018>;
639                         status = "disabled";
640                         bus_freq = <2500000>;
641                 };
642                 #include "keystone-k2g-netcp.dtsi"
643         };