arch/arm/boot/dts/lpc4337-ciaa.dts

   1 /*
   2  * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar)
   3  *
   4  * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar
   5  *
   6  * This code is released using a dual license strategy: BSD/GPL
   7  * You can choose the licence that better fits your requirements.
   8  *
   9  * Released under the terms of 3-clause BSD License
  10  * Released under the terms of GNU General Public License Version 2.0
  11  */
  12 /dts-v1/;
  13
  14 #include "lpc18xx.dtsi"
  15 #include "lpc4357.dtsi"
  16
  17 #include "dt-bindings/gpio/gpio.h"
  18
  19 / {
  20         model = "CIAA NXP LPC4337";
  21         compatible = "ciaa,lpc4337", "nxp,lpc4337", "nxp,lpc4350";
  22
  23         aliases {
  24                 serial0 = &uart2;
  25                 serial1 = &uart3;
  26         };
  27
  28         chosen {
  29                 bootargs = "console=ttyS0,115200 earlyprintk";
  30                 stdout-path = &uart2;
  31         };
  32
  33         memory@28000000 {
  34                 device_type = "memory";
  35                 reg = <0x28000000 0x0800000>; /* 8 MB */
  36         };
  37 };
  38
  39 &pinctrl {
  40         enet_rmii_pins: enet-rmii-pins {
  41                 enet_rmii_rxd_cfg {
  42                         pins = "p1_15", "p0_0";
  43                         function = "enet";
  44                         slew-rate = <1>;
  45                         bias-disable;
  46                         input-enable;
  47                         input-schmitt-disable;
  48                 };
  49
  50                 enet_rmii_txd_cfg {
  51                         pins = "p1_18", "p1_20";
  52                         function = "enet";
  53                         slew-rate = <1>;
  54                         bias-disable;
  55                         input-enable;
  56                         input-schmitt-disable;
  57                 };
  58
  59                 enet_rmii_rx_dv_cfg {
  60                         pins = "p1_16";
  61                         function = "enet";
  62                         bias-disable;
  63                         input-enable;
  64                         input-schmitt-disable;
  65                 };
  66
  67                 enet_rmii_tx_en_cfg {
  68                         pins = "p0_1";
  69                         function = "enet";
  70                         bias-disable;
  71                         input-enable;
  72                         input-schmitt-disable;
  73                 };
  74
  75                 enet_ref_clk_cfg {
  76                         pins = "p1_19";
  77                         function = "enet";
  78                         slew-rate = <1>;
  79                         bias-disable;
  80                         input-enable;
  81                         input-schmitt-disable;
  82                 };
  83
  84                 enet_mdio_cfg {
  85                         pins = "p1_17";
  86                         function = "enet";
  87                         bias-disable;
  88                         input-enable;
  89                         input-schmitt-disable;
  90                 };
  91
  92                 enet_mdc_cfg {
  93                         pins = "p7_7";
  94                         function = "enet";
  95                         slew-rate = <1>;
  96                         bias-disable;
  97                         input-enable;
  98                         input-schmitt-disable;
  99                 };
 100         };
 101
 102         i2c0_pins: i2c0-pins {
 103                 i2c0_pins_cfg {
 104                         pins = "i2c0_scl", "i2c0_sda";
 105                         function = "i2c0";
 106                         input-enable;
 107                 };
 108         };
 109
 110         ssp_pins: ssp-pins {
 111                 ssp1_cs {
 112                         pins = "p6_7";
 113                         function = "gpio";
 114                         bias-pull-up;
 115                         bias-disable;
 116                 };
 117
 118                 ssp1_miso_mosi {
 119                         pins = "p1_3", "p1_4";
 120                         function = "ssp1";
 121                         slew-rate = <1>;
 122                         bias-pull-down;
 123                         input-enable;
 124                         input-schmitt-disable;
 125                 };
 126
 127                 ssp1_sck {
 128                         pins = "pf_4";
 129                         function = "ssp1";
 130                         slew-rate = <1>;
 131                         bias-disable;
 132                 };
 133         };
 134
 135         uart2_pins: uart2-pins {
 136                 uart2_rx_cfg {
 137                         pins = "p7_2";
 138                         function = "uart2";
 139                         bias-disable;
 140                         input-enable;
 141                 };
 142
 143                 uart2_tx_cfg {
 144                         pins = "p7_1";
 145                         function = "uart2";
 146                         bias-disable;
 147                 };
 148         };
 149
 150         uart3_pins: uart3-pins {
 151                 uart3_rx_cfg {
 152                         pins = "p2_4";
 153                         function = "uart3";
 154                         bias-disable;
 155                         input-enable;
 156                 };
 157
 158                 uart3_tx_cfg {
 159                         pins = "p2_3";
 160                         function = "uart3";
 161                         bias-disable;
 162                 };
 163         };
 164 };
 165
 166 &enet_tx_clk {
 167         clock-frequency = <50000000>;
 168 };
 169
 170 &i2c0 {
 171         status = "okay";
 172         pinctrl-names = "default";
 173         pinctrl-0 = <&i2c0_pins>;
 174         clock-frequency = <400000>;
 175
 176         eeprom@50 {
 177                 compatible = "microchip,24c512", "atmel,24c512";
 178                 reg = <0x50>;
 179         };
 180
 181         eeprom@51 {
 182                 compatible = "microchip,24c02", "atmel,24c02";
 183                 reg = <0x51>;
 184         };
 185
 186         eeprom@54 {
 187                 compatible = "microchip,24c512", "atmel,24c512";
 188                 reg = <0x54>;
 189         };
 190 };
 191
 192 &mac {
 193         status = "okay";
 194         phy-mode = "rmii";
 195         pinctrl-names = "default";
 196         pinctrl-0 = <&enet_rmii_pins>;
 197 };
 198
 199 &sct_pwm {
 200         status = "okay";
 201 };
 202
 203 &ssp1 {
 204         status = "okay";
 205         pinctrl-names = "default";
 206         pinctrl-0 = <&ssp_pins>;
 207         cs-gpios = <&gpio LPC_GPIO(5,15) GPIO_ACTIVE_HIGH>;
 208         num-cs = <1>;
 209 };
 210
 211 &uart2 {
 212         status = "okay";
 213         pinctrl-names = "default";
 214         pinctrl-0 = <&uart2_pins>;
 215 };
 216
 217 &uart3 {
 218         status = "okay";
 219         pinctrl-names = "default";
 220         pinctrl-0 = <&uart3_pins>;
 221 };