1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
7 #include "omap34xx.dtsi"
8 #include "omap3-evm-common.dtsi"
9 #include "omap3-evm-processor-common.dtsi"
12 model = "TI OMAP35XX EVM (TMDSEVM3530)";
13 compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3";
17 pinctrl-names = "default";
18 pinctrl-0 = <&hsusb2_2_pins>;
20 ehci_phy_pins: pinmux_ehci_phy_pins {
21 pinctrl-single,pins = <
23 /* EHCI PHY reset GPIO etk_d7.gpio_21 */
24 OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
26 /* EHCI VBUS etk_d8.gpio_22 */
27 OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
31 /* Used by OHCI and EHCI. OHCI won't work without external phy */
32 hsusb2_2_pins: pinmux_hsusb2_2_pins {
33 pinctrl-single,pins = <
35 /* etk_d10.hsusb2_clk */
36 OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
38 /* etk_d11.hsusb2_stp */
39 OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
41 /* etk_d12.hsusb2_dir */
42 OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
44 /* etk_d13.hsusb2_nxt */
45 OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
47 /* etk_d14.hsusb2_data0 */
48 OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
50 /* etk_d15.hsusb2_data1 */
51 OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
58 compatible = "ti,omap2-nand";
59 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
60 interrupt-parent = <&gpmc>;
61 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
62 <1 IRQ_TYPE_NONE>; /* termcount */
63 linux,mtd-name= "micron,mt29f2g16abdhc";
64 nand-bus-width = <16>;
65 gpmc,device-width = <2>;
66 ti,nand-ecc-opt = "bch8";
68 gpmc,sync-clk-ps = <0>;
70 gpmc,cs-rd-off-ns = <44>;
71 gpmc,cs-wr-off-ns = <44>;
73 gpmc,adv-rd-off-ns = <34>;
74 gpmc,adv-wr-off-ns = <44>;
75 gpmc,we-off-ns = <40>;
76 gpmc,oe-off-ns = <54>;
77 gpmc,access-ns = <64>;
78 gpmc,rd-cycle-ns = <82>;
79 gpmc,wr-cycle-ns = <82>;
80 gpmc,wr-access-ns = <40>;
81 gpmc,wr-data-mux-bus-ns = <0>;