WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / boot / dts / omap3-igep0020.dts
blobe341535a7162cab7333f9f3f487f47c3f3cf3e84
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
4  *
5  * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
6  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
7  */
9 #include "omap3-igep0020-common.dtsi"
11 / {
12         model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
13         compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3";
15         vmmcsdio_fixed: fixedregulator-mmcsdio {
16                 compatible = "regulator-fixed";
17                 regulator-name = "vmmcsdio_fixed";
18                 regulator-min-microvolt = <3300000>;
19                 regulator-max-microvolt = <3300000>;
20         };
22         mmc2_pwrseq: mmc2_pwrseq {
23                 compatible = "mmc-pwrseq-simple";
24                 reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,      /* gpio_139 - RESET_N_W */
25                               <&gpio5 10 GPIO_ACTIVE_LOW>;      /* gpio_138 - WIFI_PDN */
26         };
29 &omap3_pmx_core {
30         lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
31                 pinctrl-single,pins = <
32                         OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat5.gpio_137 - RESET_N_W */
33                         OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
34                         OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat7.gpio_139 - RST_N_B */
35                 >;
36         };
39 /* On board Wifi module */
40 &mmc2 {
41         pinctrl-names = "default";
42         pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
43         vmmc-supply = <&vmmcsdio_fixed>;
44         mmc-pwrseq = <&mmc2_pwrseq>;
45         bus-width = <4>;
46         non-removable;