arch/arm/boot/dts/omap3-lilly-a83x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
   4  */
   5
   6 #include "omap36xx.dtsi"
   7
   8 / {
   9         model = "INCOstartec LILLY-A83X module (DM3730)";
  10         compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
  11
  12         chosen {
  13                         bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
  14         };
  15
  16         memory@80000000 {
  17                 device_type = "memory";
  18                 reg = <0x80000000 0x8000000>;   /* 128 MB */
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 led1 {
  25                         label = "lilly-a83x::led1";
  26                         gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
  27                         linux,default-trigger = "default-on";
  28                 };
  29
  30         };
  31
  32         sound {
  33                 compatible = "ti,omap-twl4030";
  34                 ti,model = "lilly-a83x";
  35
  36                 ti,mcbsp = <&mcbsp2>;
  37         };
  38
  39         reg_vcc3: vcc3 {
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "VCC3";
  42                 regulator-min-microvolt = <3300000>;
  43                 regulator-max-microvolt = <3300000>;
  44                 regulator-always-on;
  45         };
  46
  47         hsusb1_phy: hsusb1_phy {
  48                 compatible = "usb-nop-xceiv";
  49                 vcc-supply = <&reg_vcc3>;
  50                 #phy-cells = <0>;
  51         };
  52 };
  53
  54 &omap3_pmx_wkup {
  55         pinctrl-names = "default";
  56
  57         lan9221_pins: pinmux_lan9221_pins {
  58                 pinctrl-single,pins = <
  59                         OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_129 */
  60                 >;
  61         };
  62
  63         tsc2048_pins: pinmux_tsc2048_pins {
  64                 pinctrl-single,pins = <
  65                         OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4)   /* sys_boot6.gpio_8 */
  66                 >;
  67         };
  68
  69         mmc1cd_pins: pinmux_mmc1cd_pins {
  70                 pinctrl-single,pins = <
  71                         OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_126 */
  72                 >;
  73         };
  74 };
  75
  76 &omap3_pmx_core {
  77         pinctrl-names = "default";
  78
  79         uart1_pins: pinmux_uart1_pins {
  80                 pinctrl-single,pins = <
  81                         OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)   /* uart1_tx.uart1_tx */
  82                         OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)   /* uart1_rts.uart1_rts */
  83                         OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)    /* uart1_cts.uart1_cts */
  84                         OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)    /* uart1_rx.uart1_rx */
  85                 >;
  86         };
  87
  88         uart2_pins: pinmux_uart2_pins {
  89                 pinctrl-single,pins = <
  90                         OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)   /* mcbsp3_clkx.uart2_tx */
  91                         OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)    /* mcbsp3_fsx.uart2_rx */
  92                 >;
  93         };
  94
  95         uart3_pins: pinmux_uart3_pins {
  96                 pinctrl-single,pins = <
  97                         OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)    /* uart3_rx_irrx.uart3_rx_irrx */
  98                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)   /* uart3_tx_irtx.uart3_tx_irtx */
  99                 >;
 100         };
 101
 102         i2c1_pins: pinmux_i2c1_pins {
 103                 pinctrl-single,pins = <
 104                         OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.i2c1_scl */
 105                         OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.i2c1_sda */
 106                 >;
 107         };
 108
 109         i2c2_pins: pinmux_i2c2_pins {
 110                 pinctrl-single,pins = <
 111                         OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
 112                         OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
 113                 >;
 114         };
 115
 116         i2c3_pins: pinmux_i2c3_pins {
 117                 pinctrl-single,pins = <
 118                         OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
 119                         OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
 120                 >;
 121         };
 122
 123         hsusb1_pins: pinmux_hsusb1_pins {
 124                 pinctrl-single,pins = <
 125
 126                         /* GPIO 182 controls USB-Hub reset. But USB-Phy its
 127                          * reset can't be controlled. So we clamp this GPIO to
 128                          * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
 129                          */
 130
 131                         OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcspi2_cs1.gpio_182 */
 132                 >;
 133         };
 134
 135         hsusb_otg_pins: pinmux_hsusb_otg_pins {
 136                 pinctrl-single,pins = <
 137                         OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)   /* hsusb0_clk.hsusb0_clk */
 138                         OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)  /* hsusb0_stp.hsusb0_stp */
 139                         OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)   /* hsusb0_dir.hsusb0_dir */
 140                         OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)   /* hsusb0_nxt.hsusb0_nxt */
 141                         OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)   /* hsusb0_data0.hsusb0_data0 */
 142                         OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)   /* hsusb0_data1.hsusb0_data1 */
 143                         OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)   /* hsusb0_data2.hsusb0_data2 */
 144                         OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)   /* hsusb0_data3.hsusb0_data3 */
 145                         OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)   /* hsusb0_data4.hsusb0_data4 */
 146                         OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)   /* hsusb0_data5.hsusb0_data5 */
 147                         OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)   /* hsusb0_data6.hsusb0_data6 */
 148                         OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)   /* hsusb0_data7.hsusb0_data7 */
 149                 >;
 150         };
 151
 152         mmc1_pins: pinmux_mmc1_pins {
 153                 pinctrl-single,pins = <
 154                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
 155                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
 156                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat0.sdmmc1_dat0 */
 157                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat1.sdmmc1_dat1 */
 158                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat2.sdmmc1_dat2 */
 159                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat3.sdmmc1_dat3 */
 160                 >;
 161         };
 162
 163         spi2_pins: pinmux_spi2_pins {
 164                 pinctrl-single,pins = <
 165                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_clk.mcspi2_clk */
 166                         OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_simo.mcspi2_simo */
 167                         OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_somi.mcspi2_somi */
 168                         OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0)   /* mcspi2_cs0.mcspi2_cs0 */
 169                 >;
 170         };
 171 };
 172
 173 &omap3_pmx_core2 {
 174         pinctrl-names = "default";
 175
 176         hsusb1_2_pins: pinmux_hsusb1_2_pins {
 177                 pinctrl-single,pins = <
 178                         OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)  /* etk_clk.hsusb1_stp */
 179                         OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3)   /* etk_ctl.hsusb1_clk */
 180                         OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)   /* etk_d0.hsusb1_data0 */
 181                         OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)   /* etk_d1.hsusb1_data1 */
 182                         OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)   /* etk_d2.hsusb1_data2 */
 183                         OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)   /* etk_d3.hsusb1_data7 */
 184                         OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)   /* etk_d4.hsusb1_data4 */
 185                         OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)   /* etk_d5.hsusb1_data5 */
 186                         OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)   /* etk_d6.hsusb1_data6 */
 187                         OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)   /* etk_d7.hsusb1_data3 */
 188                         OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)   /* etk_d8.hsusb1_dir */
 189                         OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)   /* etk_d9.hsusb1_nxt */
 190                 >;
 191         };
 192
 193         gpio1_pins: pinmux_gpio1_pins {
 194                 pinctrl-single,pins = <
 195                         OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)   /* etk_d15.gpio_29 */
 196                 >;
 197         };
 198
 199 };
 200
 201 &gpio1 {
 202         pinctrl-names = "default";
 203         pinctrl-0 = <&gpio1_pins>;
 204 };
 205
 206 &gpio6 {
 207         pinctrl-names = "default";
 208         pinctrl-0 = <&hsusb1_pins>;
 209 };
 210
 211 &i2c1 {
 212         clock-frequency = <2600000>;
 213         pinctrl-names = "default";
 214         pinctrl-0 = <&i2c1_pins>;
 215
 216         twl: twl@48 {
 217                 reg = <0x48>;
 218                 interrupts = <7>;   /* SYS_NIRQ cascaded to intc */
 219                 interrupt-parent = <&intc>;
 220
 221                 twl_audio: audio {
 222                         compatible = "ti,twl4030-audio";
 223                         codec {
 224                         };
 225                 };
 226         };
 227 };
 228
 229 #include "twl4030.dtsi"
 230 #include "twl4030_omap3.dtsi"
 231
 232 &twl {
 233         vmmc1: regulator-vmmc1 {
 234                 regulator-always-on;
 235         };
 236
 237         vdd1: regulator-vdd1 {
 238                 regulator-always-on;
 239         };
 240
 241         vdd2: regulator-vdd2 {
 242                 regulator-always-on;
 243         };
 244 };
 245
 246 &i2c2 {
 247         clock-frequency = <2600000>;
 248         pinctrl-names = "default";
 249         pinctrl-0 = <&i2c2_pins>;
 250 };
 251
 252 &i2c3 {
 253         clock-frequency = <2600000>;
 254         pinctrl-names = "default";
 255         pinctrl-0 = <&i2c3_pins>;
 256                 gpiom1: gpio@20 {
 257                         compatible = "microchip,mcp23017";
 258                         gpio-controller;
 259                         #gpio-cells = <2>;
 260                         reg = <0x20>;
 261                 };
 262 };
 263
 264 &uart1 {
 265         pinctrl-names = "default";
 266         pinctrl-0 = <&uart1_pins>;
 267 };
 268
 269 &uart2 {
 270         pinctrl-names = "default";
 271         pinctrl-0 = <&uart2_pins>;
 272 };
 273
 274 &uart3 {
 275         pinctrl-names = "default";
 276         pinctrl-0 = <&uart3_pins>;
 277 };
 278
 279 &uart4 {
 280         status = "disabled";
 281 };
 282
 283 &mmc1 {
 284         cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
 285         cd-inverted;
 286         vmmc-supply = <&vmmc1>;
 287         bus-width = <4>;
 288         pinctrl-names = "default";
 289         pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
 290         cap-sdio-irq;
 291         cap-sd-highspeed;
 292         cap-mmc-highspeed;
 293 };
 294
 295 &mmc2 {
 296         status = "disabled";
 297 };
 298
 299 &mmc3 {
 300         status = "disabled";
 301 };
 302
 303 &mcspi2 {
 304         status = "okay";
 305         pinctrl-names = "default";
 306         pinctrl-0 = <&spi2_pins>;
 307
 308         tsc2046@0 {
 309                 reg = <0>;   /* CS0 */
 310                 compatible = "ti,tsc2046";
 311                 interrupt-parent = <&gpio1>;
 312                 interrupts = <8 0>;   /* boot6 / gpio_8 */
 313                 spi-max-frequency = <1000000>;
 314                 pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 315                 vcc-supply = <&reg_vcc3>;
 316                 pinctrl-names = "default";
 317                 pinctrl-0 = <&tsc2048_pins>;
 318
 319                 ti,x-min = /bits/ 16 <300>;
 320                 ti,x-max = /bits/ 16 <3000>;
 321                 ti,y-min = /bits/ 16 <600>;
 322                 ti,y-max = /bits/ 16 <3600>;
 323                 ti,x-plate-ohms = /bits/ 16 <80>;
 324                 ti,pressure-max = /bits/ 16 <255>;
 325                 ti,swap-xy;
 326
 327                 wakeup-source;
 328         };
 329 };
 330
 331 &usbhsehci {
 332         phys = <&hsusb1_phy>;
 333 };
 334
 335 &usbhshost {
 336         pinctrl-names = "default";
 337         pinctrl-0 = <&hsusb1_2_pins>;
 338         num-ports = <2>;
 339         port1-mode = "ehci-phy";
 340 };
 341
 342 &usb_otg_hs {
 343         pinctrl-names = "default";
 344         pinctrl-0 = <&hsusb_otg_pins>;
 345         interface-type = <0>;
 346         usb-phy = <&usb2_phy>;
 347         phys = <&usb2_phy>;
 348         phy-names = "usb2-phy";
 349         mode = <3>;
 350         power = <50>;
 351 };
 352
 353 &mcbsp2 {
 354         status = "okay";
 355 };
 356
 357 &gpmc {
 358         ranges = <0 0 0x30000000 0x1000000>,
 359                 <7 0 0x15000000 0x01000000>;
 360
 361         nand@0,0 {
 362                 compatible = "ti,omap2-nand";
 363                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 364                 interrupt-parent = <&gpmc>;
 365                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 366                              <1 IRQ_TYPE_NONE>; /* termcount */
 367                 nand-bus-width = <16>;
 368                 ti,nand-ecc-opt = "bch8";
 369                 /* no elm on omap3 */
 370
 371                 gpmc,mux-add-data = <0>;
 372                 gpmc,device-width = <2>;
 373                 gpmc,wait-pin = <0>;
 374                 gpmc,wait-monitoring-ns = <0>;
 375                 gpmc,burst-length= <4>;
 376                 gpmc,cs-on-ns = <0>;
 377                 gpmc,cs-rd-off-ns = <100>;
 378                 gpmc,cs-wr-off-ns = <100>;
 379                 gpmc,adv-on-ns = <0>;
 380                 gpmc,adv-rd-off-ns = <100>;
 381                 gpmc,adv-wr-off-ns = <100>;
 382                 gpmc,oe-on-ns = <5>;
 383                 gpmc,oe-off-ns = <75>;
 384                 gpmc,we-on-ns = <5>;
 385                 gpmc,we-off-ns = <75>;
 386                 gpmc,rd-cycle-ns = <100>;
 387                 gpmc,wr-cycle-ns = <100>;
 388                 gpmc,access-ns = <60>;
 389                 gpmc,page-burst-access-ns = <5>;
 390                 gpmc,bus-turnaround-ns = <0>;
 391                 gpmc,cycle2cycle-samecsen;
 392                 gpmc,cycle2cycle-delay-ns = <50>;
 393                 gpmc,wr-data-mux-bus-ns = <75>;
 394                 gpmc,wr-access-ns = <155>;
 395
 396                 #address-cells = <1>;
 397                 #size-cells = <1>;
 398
 399                 partition@0 {
 400                         label = "MLO";
 401                         reg = <0 0x80000>;
 402                 };
 403
 404                 partition@80000 {
 405                         label = "u-boot";
 406                         reg = <0x80000 0x1e0000>;
 407                 };
 408
 409                 partition@260000 {
 410                         label = "u-boot-environment";
 411                         reg = <0x260000 0x20000>;
 412                 };
 413
 414                 partition@280000 {
 415                         label = "kernel";
 416                         reg = <0x280000 0x500000>;
 417                 };
 418
 419                 partition@780000 {
 420                         label = "filesystem";
 421                         reg = <0x780000 0xf880000>;
 422                 };
 423         };
 424
 425         ethernet@7,0 {
 426                 compatible = "smsc,lan9221", "smsc,lan9115";
 427                 bank-width = <2>;
 428                 gpmc,mux-add-data = <2>;
 429                 gpmc,cs-on-ns = <10>;
 430                 gpmc,cs-rd-off-ns = <60>;
 431                 gpmc,cs-wr-off-ns = <60>;
 432                 gpmc,adv-on-ns = <0>;
 433                 gpmc,adv-rd-off-ns = <10>;
 434                 gpmc,adv-wr-off-ns = <10>;
 435                 gpmc,oe-on-ns = <10>;
 436                 gpmc,oe-off-ns = <60>;
 437                 gpmc,we-on-ns = <10>;
 438                 gpmc,we-off-ns = <60>;
 439                 gpmc,rd-cycle-ns = <100>;
 440                 gpmc,wr-cycle-ns = <100>;
 441                 gpmc,access-ns = <50>;
 442                 gpmc,page-burst-access-ns = <5>;
 443                 gpmc,bus-turnaround-ns = <0>;
 444                 gpmc,cycle2cycle-delay-ns = <75>;
 445                 gpmc,wr-data-mux-bus-ns = <15>;
 446                 gpmc,wr-access-ns = <75>;
 447                 gpmc,cycle2cycle-samecsen;
 448                 gpmc,cycle2cycle-diffcsen;
 449                 vddvario-supply = <&reg_vcc3>;
 450                 vdd33a-supply = <&reg_vcc3>;
 451                 reg-io-width = <4>;
 452                 interrupt-parent = <&gpio5>;
 453                 interrupts = <1 0x2>;
 454                 reg = <7 0 0xff>;
 455                 pinctrl-names = "default";
 456                 pinctrl-0 = <&lan9221_pins>;
 457                 phy-mode = "mii";
 458         };
 459 };