WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / boot / dts / uniphier-sld8.dtsi
blob96a766deb8d118fd629d4ab62008c17f138d8eef
1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
2 //
3 // Device Tree Source for UniPhier sLD8 SoC
4 //
5 // Copyright (C) 2015-2016 Socionext Inc.
6 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
8 #include <dt-bindings/gpio/uniphier-gpio.h>
10 / {
11         compatible = "socionext,uniphier-sld8";
12         #address-cells = <1>;
13         #size-cells = <1>;
15         cpus {
16                 #address-cells = <1>;
17                 #size-cells = <0>;
19                 cpu@0 {
20                         device_type = "cpu";
21                         compatible = "arm,cortex-a9";
22                         reg = <0>;
23                         enable-method = "psci";
24                         next-level-cache = <&l2>;
25                 };
26         };
28         psci {
29                 compatible = "arm,psci-0.2";
30                 method = "smc";
31         };
33         clocks {
34                 refclk: ref {
35                         compatible = "fixed-clock";
36                         #clock-cells = <0>;
37                         clock-frequency = <25000000>;
38                 };
40                 arm_timer_clk: arm-timer {
41                         #clock-cells = <0>;
42                         compatible = "fixed-clock";
43                         clock-frequency = <50000000>;
44                 };
45         };
47         soc {
48                 compatible = "simple-bus";
49                 #address-cells = <1>;
50                 #size-cells = <1>;
51                 ranges;
52                 interrupt-parent = <&intc>;
54                 l2: cache-controller@500c0000 {
55                         compatible = "socionext,uniphier-system-cache";
56                         reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
57                               <0x506c0000 0x400>;
58                         interrupts = <0 174 4>, <0 175 4>;
59                         cache-unified;
60                         cache-size = <(256 * 1024)>;
61                         cache-sets = <256>;
62                         cache-line-size = <128>;
63                         cache-level = <2>;
64                 };
66                 spi: spi@54006000 {
67                         compatible = "socionext,uniphier-scssi";
68                         status = "disabled";
69                         reg = <0x54006000 0x100>;
70                         #address-cells = <1>;
71                         #size-cells = <0>;
72                         interrupts = <0 39 4>;
73                         pinctrl-names = "default";
74                         pinctrl-0 = <&pinctrl_spi0>;
75                         clocks = <&peri_clk 11>;
76                         resets = <&peri_rst 11>;
77                 };
79                 serial0: serial@54006800 {
80                         compatible = "socionext,uniphier-uart";
81                         status = "disabled";
82                         reg = <0x54006800 0x40>;
83                         interrupts = <0 33 4>;
84                         pinctrl-names = "default";
85                         pinctrl-0 = <&pinctrl_uart0>;
86                         clocks = <&peri_clk 0>;
87                         resets = <&peri_rst 0>;
88                 };
90                 serial1: serial@54006900 {
91                         compatible = "socionext,uniphier-uart";
92                         status = "disabled";
93                         reg = <0x54006900 0x40>;
94                         interrupts = <0 35 4>;
95                         pinctrl-names = "default";
96                         pinctrl-0 = <&pinctrl_uart1>;
97                         clocks = <&peri_clk 1>;
98                         resets = <&peri_rst 1>;
99                 };
101                 serial2: serial@54006a00 {
102                         compatible = "socionext,uniphier-uart";
103                         status = "disabled";
104                         reg = <0x54006a00 0x40>;
105                         interrupts = <0 37 4>;
106                         pinctrl-names = "default";
107                         pinctrl-0 = <&pinctrl_uart2>;
108                         clocks = <&peri_clk 2>;
109                         resets = <&peri_rst 2>;
110                 };
112                 serial3: serial@54006b00 {
113                         compatible = "socionext,uniphier-uart";
114                         status = "disabled";
115                         reg = <0x54006b00 0x40>;
116                         interrupts = <0 29 4>;
117                         pinctrl-names = "default";
118                         pinctrl-0 = <&pinctrl_uart3>;
119                         clocks = <&peri_clk 3>;
120                         resets = <&peri_rst 3>;
121                 };
123                 gpio: gpio@55000000 {
124                         compatible = "socionext,uniphier-gpio";
125                         reg = <0x55000000 0x200>;
126                         interrupt-parent = <&aidet>;
127                         interrupt-controller;
128                         #interrupt-cells = <2>;
129                         gpio-controller;
130                         #gpio-cells = <2>;
131                         gpio-ranges = <&pinctrl 0 0 0>,
132                                       <&pinctrl 104 0 0>,
133                                       <&pinctrl 112 0 0>;
134                         gpio-ranges-group-names = "gpio_range0",
135                                                   "gpio_range1",
136                                                   "gpio_range2";
137                         ngpios = <136>;
138                         socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
139                 };
141                 i2c0: i2c@58400000 {
142                         compatible = "socionext,uniphier-i2c";
143                         status = "disabled";
144                         reg = <0x58400000 0x40>;
145                         #address-cells = <1>;
146                         #size-cells = <0>;
147                         interrupts = <0 41 1>;
148                         pinctrl-names = "default";
149                         pinctrl-0 = <&pinctrl_i2c0>;
150                         clocks = <&peri_clk 4>;
151                         resets = <&peri_rst 4>;
152                         clock-frequency = <100000>;
153                 };
155                 i2c1: i2c@58480000 {
156                         compatible = "socionext,uniphier-i2c";
157                         status = "disabled";
158                         reg = <0x58480000 0x40>;
159                         #address-cells = <1>;
160                         #size-cells = <0>;
161                         interrupts = <0 42 1>;
162                         pinctrl-names = "default";
163                         pinctrl-0 = <&pinctrl_i2c1>;
164                         clocks = <&peri_clk 5>;
165                         resets = <&peri_rst 5>;
166                         clock-frequency = <100000>;
167                 };
169                 /* chip-internal connection for DMD */
170                 i2c2: i2c@58500000 {
171                         compatible = "socionext,uniphier-i2c";
172                         reg = <0x58500000 0x40>;
173                         #address-cells = <1>;
174                         #size-cells = <0>;
175                         interrupts = <0 43 1>;
176                         pinctrl-names = "default";
177                         pinctrl-0 = <&pinctrl_i2c2>;
178                         clocks = <&peri_clk 6>;
179                         resets = <&peri_rst 6>;
180                         clock-frequency = <400000>;
181                 };
183                 i2c3: i2c@58580000 {
184                         compatible = "socionext,uniphier-i2c";
185                         status = "disabled";
186                         reg = <0x58580000 0x40>;
187                         #address-cells = <1>;
188                         #size-cells = <0>;
189                         interrupts = <0 44 1>;
190                         pinctrl-names = "default";
191                         pinctrl-0 = <&pinctrl_i2c3>;
192                         clocks = <&peri_clk 7>;
193                         resets = <&peri_rst 7>;
194                         clock-frequency = <100000>;
195                 };
197                 system_bus: system-bus@58c00000 {
198                         compatible = "socionext,uniphier-system-bus";
199                         status = "disabled";
200                         reg = <0x58c00000 0x400>;
201                         #address-cells = <2>;
202                         #size-cells = <1>;
203                         pinctrl-names = "default";
204                         pinctrl-0 = <&pinctrl_system_bus>;
205                 };
207                 smpctrl@59801000 {
208                         compatible = "socionext,uniphier-smpctrl";
209                         reg = <0x59801000 0x400>;
210                 };
212                 mioctrl@59810000 {
213                         compatible = "socionext,uniphier-sld8-mioctrl",
214                                      "simple-mfd", "syscon";
215                         reg = <0x59810000 0x800>;
217                         mio_clk: clock {
218                                 compatible = "socionext,uniphier-sld8-mio-clock";
219                                 #clock-cells = <1>;
220                         };
222                         mio_rst: reset {
223                                 compatible = "socionext,uniphier-sld8-mio-reset";
224                                 #reset-cells = <1>;
225                         };
226                 };
228                 perictrl@59820000 {
229                         compatible = "socionext,uniphier-sld8-perictrl",
230                                      "simple-mfd", "syscon";
231                         reg = <0x59820000 0x200>;
233                         peri_clk: clock {
234                                 compatible = "socionext,uniphier-sld8-peri-clock";
235                                 #clock-cells = <1>;
236                         };
238                         peri_rst: reset {
239                                 compatible = "socionext,uniphier-sld8-peri-reset";
240                                 #reset-cells = <1>;
241                         };
242                 };
244                 dmac: dma-controller@5a000000 {
245                         compatible = "socionext,uniphier-mio-dmac";
246                         reg = <0x5a000000 0x1000>;
247                         interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
248                                      <0 71 4>, <0 72 4>, <0 73 4>;
249                         clocks = <&mio_clk 7>;
250                         resets = <&mio_rst 7>;
251                         #dma-cells = <1>;
252                 };
254                 sd: mmc@5a400000 {
255                         compatible = "socionext,uniphier-sd-v2.91";
256                         status = "disabled";
257                         reg = <0x5a400000 0x200>;
258                         interrupts = <0 76 4>;
259                         pinctrl-names = "default", "uhs";
260                         pinctrl-0 = <&pinctrl_sd>;
261                         pinctrl-1 = <&pinctrl_sd_uhs>;
262                         clocks = <&mio_clk 0>;
263                         reset-names = "host", "bridge";
264                         resets = <&mio_rst 0>, <&mio_rst 3>;
265                         dma-names = "rx-tx";
266                         dmas = <&dmac 4>;
267                         bus-width = <4>;
268                         cap-sd-highspeed;
269                         sd-uhs-sdr12;
270                         sd-uhs-sdr25;
271                         sd-uhs-sdr50;
272                 };
274                 emmc: mmc@5a500000 {
275                         compatible = "socionext,uniphier-sd-v2.91";
276                         status = "disabled";
277                         reg = <0x5a500000 0x200>;
278                         interrupts = <0 78 4>;
279                         pinctrl-names = "default";
280                         pinctrl-0 = <&pinctrl_emmc>;
281                         clocks = <&mio_clk 1>;
282                         reset-names = "host", "bridge", "hw";
283                         resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
284                         dma-names = "rx-tx";
285                         dmas = <&dmac 6>;
286                         bus-width = <8>;
287                         cap-mmc-highspeed;
288                         cap-mmc-hw-reset;
289                         non-removable;
290                 };
292                 usb0: usb@5a800100 {
293                         compatible = "socionext,uniphier-ehci", "generic-ehci";
294                         status = "disabled";
295                         reg = <0x5a800100 0x100>;
296                         interrupts = <0 80 4>;
297                         pinctrl-names = "default";
298                         pinctrl-0 = <&pinctrl_usb0>;
299                         clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
300                                  <&mio_clk 12>;
301                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
302                                  <&mio_rst 12>;
303                         has-transaction-translator;
304                 };
306                 usb1: usb@5a810100 {
307                         compatible = "socionext,uniphier-ehci", "generic-ehci";
308                         status = "disabled";
309                         reg = <0x5a810100 0x100>;
310                         interrupts = <0 81 4>;
311                         pinctrl-names = "default";
312                         pinctrl-0 = <&pinctrl_usb1>;
313                         clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
314                                  <&mio_clk 13>;
315                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
316                                  <&mio_rst 13>;
317                         has-transaction-translator;
318                 };
320                 usb2: usb@5a820100 {
321                         compatible = "socionext,uniphier-ehci", "generic-ehci";
322                         status = "disabled";
323                         reg = <0x5a820100 0x100>;
324                         interrupts = <0 82 4>;
325                         pinctrl-names = "default";
326                         pinctrl-0 = <&pinctrl_usb2>;
327                         clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
328                                  <&mio_clk 14>;
329                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
330                                  <&mio_rst 14>;
331                         has-transaction-translator;
332                 };
334                 soc-glue@5f800000 {
335                         compatible = "socionext,uniphier-sld8-soc-glue",
336                                      "simple-mfd", "syscon";
337                         reg = <0x5f800000 0x2000>;
339                         pinctrl: pinctrl {
340                                 compatible = "socionext,uniphier-sld8-pinctrl";
341                         };
342                 };
344                 soc-glue@5f900000 {
345                         compatible = "socionext,uniphier-sld8-soc-glue-debug",
346                                      "simple-mfd";
347                         #address-cells = <1>;
348                         #size-cells = <1>;
349                         ranges = <0 0x5f900000 0x2000>;
351                         efuse@100 {
352                                 compatible = "socionext,uniphier-efuse";
353                                 reg = <0x100 0x28>;
354                         };
356                         efuse@200 {
357                                 compatible = "socionext,uniphier-efuse";
358                                 reg = <0x200 0x14>;
359                         };
360                 };
362                 timer@60000200 {
363                         compatible = "arm,cortex-a9-global-timer";
364                         reg = <0x60000200 0x20>;
365                         interrupts = <1 11 0x104>;
366                         clocks = <&arm_timer_clk>;
367                 };
369                 timer@60000600 {
370                         compatible = "arm,cortex-a9-twd-timer";
371                         reg = <0x60000600 0x20>;
372                         interrupts = <1 13 0x104>;
373                         clocks = <&arm_timer_clk>;
374                 };
376                 intc: interrupt-controller@60001000 {
377                         compatible = "arm,cortex-a9-gic";
378                         reg = <0x60001000 0x1000>,
379                               <0x60000100 0x100>;
380                         #interrupt-cells = <3>;
381                         interrupt-controller;
382                 };
384                 aidet: interrupt-controller@61830000 {
385                         compatible = "socionext,uniphier-sld8-aidet";
386                         reg = <0x61830000 0x200>;
387                         interrupt-controller;
388                         #interrupt-cells = <2>;
389                 };
391                 sysctrl@61840000 {
392                         compatible = "socionext,uniphier-sld8-sysctrl",
393                                      "simple-mfd", "syscon";
394                         reg = <0x61840000 0x10000>;
396                         sys_clk: clock {
397                                 compatible = "socionext,uniphier-sld8-clock";
398                                 #clock-cells = <1>;
399                         };
401                         sys_rst: reset {
402                                 compatible = "socionext,uniphier-sld8-reset";
403                                 #reset-cells = <1>;
404                         };
405                 };
407                 nand: nand-controller@68000000 {
408                         compatible = "socionext,uniphier-denali-nand-v5a";
409                         status = "disabled";
410                         reg-names = "nand_data", "denali_reg";
411                         reg = <0x68000000 0x20>, <0x68100000 0x1000>;
412                         #address-cells = <1>;
413                         #size-cells = <0>;
414                         interrupts = <0 65 4>;
415                         pinctrl-names = "default";
416                         pinctrl-0 = <&pinctrl_nand>;
417                         clock-names = "nand", "nand_x", "ecc";
418                         clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
419                         reset-names = "nand", "reg";
420                         resets = <&sys_rst 2>, <&sys_rst 2>;
421                 };
422         };
425 #include "uniphier-pinctrl.dtsi"