WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / boot / dts / vf-colibri.dtsi
blobcc1e069c44e626cd309304a85c7b94225b178039
1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
2 /*
3  * Copyright 2014-2020 Toradex
4  *
5  */
7 / {
8         aliases {
9                 ethernet0 = &fec1;
10                 ethernet1 = &fec0;
11         };
13         bl: backlight {
14                 compatible = "pwm-backlight";
15                 pinctrl-names = "default";
16                 pinctrl-0 = <&pinctrl_gpio_bl_on>;
17                 pwms = <&pwm0 0 5000000 0>;
18                 enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
19                 status = "disabled";
20         };
22         reg_module_3v3: regulator-module-3v3 {
23                 compatible = "regulator-fixed";
24                 regulator-name = "+V3.3";
25                 regulator-min-microvolt = <3300000>;
26                 regulator-max-microvolt = <3300000>;
27         };
29         reg_module_3v3_avdd: regulator-module-3v3-avdd {
30                 compatible = "regulator-fixed";
31                 regulator-name = "+V3.3_AVDD_AUDIO";
32                 regulator-min-microvolt = <3300000>;
33                 regulator-max-microvolt = <3300000>;
34         };
37 &adc0 {
38         status = "okay";
39         vref-supply = <&reg_module_3v3_avdd>;
42 &adc1 {
43         status = "okay";
44         vref-supply = <&reg_module_3v3_avdd>;
47 &can0 {
48         pinctrl-names = "default";
49         pinctrl-0 = <&pinctrl_flexcan0>;
50         status = "disabled";
53 &can1 {
54         pinctrl-names = "default";
55         pinctrl-0 = <&pinctrl_flexcan1>;
56         status = "disabled";
59 &clks {
60         assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
61                           <&clks VF610_CLK_ENET_TS_SEL>;
62         assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
63                                  <&clks VF610_CLK_ENET_50M>;
66 &dspi1 {
67         bus-num = <1>;
68         pinctrl-names = "default";
69         pinctrl-0 = <&pinctrl_dspi1>;
72 &edma0 {
73         status = "okay";
76 &edma1 {
77         status = "okay";
80 &esdhc1 {
81         pinctrl-names = "default";
82         pinctrl-0 = <&pinctrl_esdhc1>;
83         bus-width = <4>;
84         cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
85         disable-wp;
88 &fec1 {
89         phy-mode = "rmii";
90         phy-supply = <&reg_module_3v3>;
91         pinctrl-names = "default";
92         pinctrl-0 = <&pinctrl_fec1>;
95 &i2c0 {
96         clock-frequency = <400000>;
97         pinctrl-names = "default", "gpio";
98         pinctrl-0 = <&pinctrl_i2c0>;
99         pinctrl-1 = <&pinctrl_i2c0_gpio>;
100         scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
101         sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
104 &nfc {
105         pinctrl-names = "default";
106         pinctrl-0 = <&pinctrl_nfc>;
107         status = "okay";
109         nand@0 {
110                 compatible = "fsl,vf610-nfc-nandcs";
111                 reg = <0>;
112                 #address-cells = <1>;
113                 #size-cells = <1>;
114                 nand-bus-width = <8>;
115                 nand-ecc-mode = "hw";
116                 nand-ecc-strength = <32>;
117                 nand-ecc-step-size = <2048>;
118                 nand-on-flash-bbt;
119         };
122 &pwm0 {
123         pinctrl-names = "default";
124         pinctrl-0 = <&pinctrl_pwm0>;
127 &pwm1 {
128         pinctrl-names = "default";
129         pinctrl-0 = <&pinctrl_pwm1>;
132 &uart0 {
133         pinctrl-names = "default";
134         pinctrl-0 = <&pinctrl_uart0>;
137 &uart1 {
138         pinctrl-names = "default";
139         pinctrl-0 = <&pinctrl_uart1>;
142 &uart2 {
143         pinctrl-names = "default";
144         pinctrl-0 = <&pinctrl_uart2>;
147 &usbdev0 {
148         disable-over-current;
149         status = "okay";
152 &usbh1 {
153         disable-over-current;
154         status = "okay";
157 &usbmisc0 {
158         status = "okay";
161 &usbmisc1 {
162         status = "okay";
165 &usbphy0 {
166         status = "okay";
169 &usbphy1 {
170         status = "okay";
173 &iomuxc {
174         vf610-colibri {
175                 pinctrl_flexcan0: can0grp {
176                         fsl,pins = <
177                                 VF610_PAD_PTB14__CAN0_RX        0x31F1
178                                 VF610_PAD_PTB15__CAN0_TX        0x31F2
179                         >;
180                 };
182                 pinctrl_flexcan1: can1grp {
183                         fsl,pins = <
184                                 VF610_PAD_PTB16__CAN1_RX        0x31F1
185                                 VF610_PAD_PTB17__CAN1_TX        0x31F2
186                         >;
187                 };
189                 pinctrl_gpio_ext: gpio_ext {
190                         fsl,pins = <
191                                 VF610_PAD_PTD10__GPIO_89        0x22ed /* EXT_IO_0 */
192                                 VF610_PAD_PTD9__GPIO_88         0x22ed /* EXT_IO_1 */
193                                 VF610_PAD_PTD26__GPIO_68        0x22ed /* EXT_IO_2 */
194                         >;
195                 };
197                 pinctrl_dcu0_1: dcu0grp_1 {
198                         fsl,pins = <
199                                 VF610_PAD_PTE0__DCU0_HSYNC      0x1902
200                                 VF610_PAD_PTE1__DCU0_VSYNC      0x1902
201                                 VF610_PAD_PTE2__DCU0_PCLK       0x1902
202                                 VF610_PAD_PTE4__DCU0_DE         0x1902
203                                 VF610_PAD_PTE5__DCU0_R0         0x1902
204                                 VF610_PAD_PTE6__DCU0_R1         0x1902
205                                 VF610_PAD_PTE7__DCU0_R2         0x1902
206                                 VF610_PAD_PTE8__DCU0_R3         0x1902
207                                 VF610_PAD_PTE9__DCU0_R4         0x1902
208                                 VF610_PAD_PTE10__DCU0_R5        0x1902
209                                 VF610_PAD_PTE11__DCU0_R6        0x1902
210                                 VF610_PAD_PTE12__DCU0_R7        0x1902
211                                 VF610_PAD_PTE13__DCU0_G0        0x1902
212                                 VF610_PAD_PTE14__DCU0_G1        0x1902
213                                 VF610_PAD_PTE15__DCU0_G2        0x1902
214                                 VF610_PAD_PTE16__DCU0_G3        0x1902
215                                 VF610_PAD_PTE17__DCU0_G4        0x1902
216                                 VF610_PAD_PTE18__DCU0_G5        0x1902
217                                 VF610_PAD_PTE19__DCU0_G6        0x1902
218                                 VF610_PAD_PTE20__DCU0_G7        0x1902
219                                 VF610_PAD_PTE21__DCU0_B0        0x1902
220                                 VF610_PAD_PTE22__DCU0_B1        0x1902
221                                 VF610_PAD_PTE23__DCU0_B2        0x1902
222                                 VF610_PAD_PTE24__DCU0_B3        0x1902
223                                 VF610_PAD_PTE25__DCU0_B4        0x1902
224                                 VF610_PAD_PTE26__DCU0_B5        0x1902
225                                 VF610_PAD_PTE27__DCU0_B6        0x1902
226                                 VF610_PAD_PTE28__DCU0_B7        0x1902
227                         >;
228                 };
230                 pinctrl_dspi1: dspi1grp {
231                         fsl,pins = <
232                                 VF610_PAD_PTD5__DSPI1_CS0               0x33e2
233                                 VF610_PAD_PTD6__DSPI1_SIN               0x33e1
234                                 VF610_PAD_PTD7__DSPI1_SOUT              0x33e2
235                                 VF610_PAD_PTD8__DSPI1_SCK               0x33e2
236                         >;
237                 };
239                 pinctrl_esdhc1: esdhc1grp {
240                         fsl,pins = <
241                                 VF610_PAD_PTA24__ESDHC1_CLK     0x31ef
242                                 VF610_PAD_PTA25__ESDHC1_CMD     0x31ef
243                                 VF610_PAD_PTA26__ESDHC1_DAT0    0x31ef
244                                 VF610_PAD_PTA27__ESDHC1_DAT1    0x31ef
245                                 VF610_PAD_PTA28__ESDHC1_DATA2   0x31ef
246                                 VF610_PAD_PTA29__ESDHC1_DAT3    0x31ef
247                                 VF610_PAD_PTB20__GPIO_42        0x219d
248                         >;
249                 };
251                 pinctrl_fec1: fec1grp {
252                         fsl,pins = <
253                                 VF610_PAD_PTA6__RMII_CLKOUT             0x30d2
254                                 VF610_PAD_PTC9__ENET_RMII1_MDC          0x30d2
255                                 VF610_PAD_PTC10__ENET_RMII1_MDIO        0x30d3
256                                 VF610_PAD_PTC11__ENET_RMII1_CRS         0x30d1
257                                 VF610_PAD_PTC12__ENET_RMII1_RXD1        0x30d1
258                                 VF610_PAD_PTC13__ENET_RMII1_RXD0        0x30d1
259                                 VF610_PAD_PTC14__ENET_RMII1_RXER        0x30d1
260                                 VF610_PAD_PTC15__ENET_RMII1_TXD1        0x30d2
261                                 VF610_PAD_PTC16__ENET_RMII1_TXD0        0x30d2
262                                 VF610_PAD_PTC17__ENET_RMII1_TXEN        0x30d2
263                         >;
264                 };
266                 pinctrl_gpio_bl_on: gpio_bl_on {
267                         fsl,pins = <
268                                 VF610_PAD_PTC0__GPIO_45         0x22ef
269                         >;
270                 };
272                 pinctrl_i2c0: i2c0grp {
273                         fsl,pins = <
274                                 VF610_PAD_PTB14__I2C0_SCL               0x37ff
275                                 VF610_PAD_PTB15__I2C0_SDA               0x37ff
276                         >;
277                 };
279                 pinctrl_i2c0_gpio: i2c0gpiogrp {
280                         fsl,pins = <
281                                 VF610_PAD_PTB14__GPIO_36                0x37ff
282                                 VF610_PAD_PTB15__GPIO_37                0x37ff
283                         >;
284                 };
286                 pinctrl_nfc: nfcgrp {
287                         fsl,pins = <
288                                 VF610_PAD_PTD23__NF_IO7         0x28df
289                                 VF610_PAD_PTD22__NF_IO6         0x28df
290                                 VF610_PAD_PTD21__NF_IO5         0x28df
291                                 VF610_PAD_PTD20__NF_IO4         0x28df
292                                 VF610_PAD_PTD19__NF_IO3         0x28df
293                                 VF610_PAD_PTD18__NF_IO2         0x28df
294                                 VF610_PAD_PTD17__NF_IO1         0x28df
295                                 VF610_PAD_PTD16__NF_IO0         0x28df
296                                 VF610_PAD_PTB24__NF_WE_B        0x28c2
297                                 VF610_PAD_PTB25__NF_CE0_B       0x28c2
298                                 VF610_PAD_PTB27__NF_RE_B        0x28c2
299                                 VF610_PAD_PTC26__NF_RB_B        0x283d
300                                 VF610_PAD_PTC27__NF_ALE         0x28c2
301                                 VF610_PAD_PTC28__NF_CLE         0x28c2
302                         >;
303                 };
305                 pinctrl_pwm0: pwm0grp {
306                         fsl,pins = <
307                                 VF610_PAD_PTB0__FTM0_CH0                0x1182
308                                 VF610_PAD_PTB1__FTM0_CH1                0x1182
309                         >;
310                 };
312                 pinctrl_pwm1: pwm1grp {
313                         fsl,pins = <
314                                 VF610_PAD_PTB8__FTM1_CH0                0x1182
315                                 VF610_PAD_PTB9__FTM1_CH1                0x1182
316                         >;
317                 };
319                 pinctrl_uart0: uart0grp {
320                         fsl,pins = <
321                                 VF610_PAD_PTB10__UART0_TX               0x21a2
322                                 VF610_PAD_PTB11__UART0_RX               0x21a1
323                                 VF610_PAD_PTB12__UART0_RTS              0x21a2
324                                 VF610_PAD_PTB13__UART0_CTS              0x21a1
325                         >;
326                 };
328                 pinctrl_uart1: uart1grp {
329                         fsl,pins = <
330                                 VF610_PAD_PTB4__UART1_TX                0x21a2
331                                 VF610_PAD_PTB5__UART1_RX                0x21a1
332                         >;
333                 };
335                 pinctrl_uart2: uart2grp {
336                         fsl,pins = <
337                                 VF610_PAD_PTD0__UART2_TX                0x21a2
338                                 VF610_PAD_PTD1__UART2_RX                0x21a1
339                                 VF610_PAD_PTD2__UART2_RTS               0x21a2
340                                 VF610_PAD_PTD3__UART2_CTS               0x21a1
341                         >;
342                 };
344                 pinctrl_usbh1_reg: gpio_usb_vbus {
345                         fsl,pins = <
346                                 VF610_PAD_PTD4__GPIO_83                 0x22ed
347                         >;
348                 };
349         };