arch/arm/boot/dts/vf610-zii-scu4-aib.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 //
   3 // Copyright (C) 2016-2018 Zodiac Inflight Innovations
   4
   5 /dts-v1/;
   6 #include "vf610.dtsi"
   7
   8 / {
   9         model = "ZII VF610 SCU4 AIB";
  10         compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610";
  11
  12         chosen {
  13                 stdout-path = &uart0;
  14         };
  15
  16         memory@80000000 {
  17                 device_type = "memory";
  18                 reg = <0x80000000 0x20000000>;
  19         };
  20
  21         gpio-leds {
  22                 compatible = "gpio-leds";
  23                 pinctrl-0 = <&pinctrl_leds_debug>;
  24                 pinctrl-names = "default";
  25
  26                 debug {
  27                         label = "zii:green:debug1";
  28                         gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
  29                         linux,default-trigger = "heartbeat";
  30                 };
  31         };
  32
  33         mdio-mux {
  34                 compatible = "mdio-mux-gpio";
  35                 pinctrl-0 = <&pinctrl_mdio_mux>;
  36                 pinctrl-names = "default";
  37                 gpios = <&gpio4 4  GPIO_ACTIVE_HIGH
  38                          &gpio4 5  GPIO_ACTIVE_HIGH
  39                          &gpio3 30 GPIO_ACTIVE_HIGH
  40                          &gpio3 31 GPIO_ACTIVE_HIGH>;
  41                 mdio-parent-bus = <&mdio1>;
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44
  45                 mdio_mux_1: mdio@1 {
  46                         reg = <1>;
  47                         #address-cells = <1>;
  48                         #size-cells = <0>;
  49
  50                         switch0: switch0@0 {
  51                                 compatible = "marvell,mv88e6190";
  52                                 reg = <0>;
  53                                 dsa,member = <0 0>;
  54                                 eeprom-length = <65536>;
  55
  56                                 ports {
  57                                         #address-cells = <1>;
  58                                         #size-cells = <0>;
  59
  60                                         port@0 {
  61                                                 reg = <0>;
  62                                                 label = "cpu";
  63                                                 ethernet = <&fec1>;
  64
  65                                                 fixed-link {
  66                                                         speed = <100>;
  67                                                         full-duplex;
  68                                                 };
  69                                         };
  70
  71                                         port@1 {
  72                                                 reg = <1>;
  73                                                 label = "aib2main_1";
  74                                         };
  75
  76                                         port@2 {
  77                                                 reg = <2>;
  78                                                 label = "aib2main_2";
  79                                         };
  80
  81                                         port@3 {
  82                                                 reg = <3>;
  83                                                 label = "eth_cu_1000_5";
  84                                         };
  85
  86                                         port@4 {
  87                                                 reg = <4>;
  88                                                 label = "eth_cu_1000_6";
  89                                         };
  90
  91                                         port@5 {
  92                                                 reg = <5>;
  93                                                 label = "eth_cu_1000_4";
  94                                         };
  95
  96                                         port@6 {
  97                                                 reg = <6>;
  98                                                 label = "eth_cu_1000_7";
  99                                         };
 100
 101                                         port@7 {
 102                                                 reg = <7>;
 103                                                 label = "modem_pic";
 104
 105                                                 fixed-link {
 106                                                         speed = <100>;
 107                                                         full-duplex;
 108                                                 };
 109                                         };
 110
 111                                         switch0port10: port@10 {
 112                                                 reg = <10>;
 113                                                 label = "dsa";
 114                                                 phy-mode = "xgmii";
 115                                                 link = <&switch1port10
 116                                                         &switch3port10
 117                                                         &switch2port10>;
 118                                         };
 119                                 };
 120                         };
 121                 };
 122
 123                 mdio_mux_2: mdio@2 {
 124                         reg = <2>;
 125                         #address-cells = <1>;
 126                         #size-cells = <0>;
 127
 128                         switch1: switch1@0 {
 129                                 compatible = "marvell,mv88e6190";
 130                                 reg = <0>;
 131                                 dsa,member = <0 1>;
 132                                 eeprom-length = <65536>;
 133
 134                                 ports {
 135                                         #address-cells = <1>;
 136                                         #size-cells = <0>;
 137
 138                                         port@1 {
 139                                                 reg = <1>;
 140                                                 label = "eth_cu_1000_3";
 141                                         };
 142
 143                                         port@2 {
 144                                                 reg = <2>;
 145                                                 label = "eth_cu_100_2";
 146                                         };
 147
 148                                         port@3 {
 149                                                 reg = <3>;
 150                                                 label = "eth_cu_100_3";
 151                                         };
 152
 153                                         switch1port9: port@9 {
 154                                                 reg = <9>;
 155                                                 label = "dsa";
 156                                                 phy-mode = "xgmii";
 157                                                 link = <&switch3port10
 158                                                         &switch2port10>;
 159                                         };
 160
 161                                         switch1port10: port@10 {
 162                                                 reg = <10>;
 163                                                 label = "dsa";
 164                                                 phy-mode = "xgmii";
 165                                                 link = <&switch0port10>;
 166                                         };
 167                                 };
 168                         };
 169                 };
 170
 171                 mdio_mux_4: mdio@4 {
 172                         reg = <4>;
 173                         #address-cells = <1>;
 174                         #size-cells = <0>;
 175
 176                         switch2: switch2@0 {
 177                                 compatible = "marvell,mv88e6190";
 178                                 reg = <0>;
 179                                 dsa,member = <0 2>;
 180                                 eeprom-length = <65536>;
 181
 182                                 ports {
 183                                         #address-cells = <1>;
 184                                         #size-cells = <0>;
 185
 186                                         port@2 {
 187                                                 reg = <2>;
 188                                                 label = "eth_fc_1000_2";
 189                                                 phy-mode = "1000base-x";
 190                                                 managed = "in-band-status";
 191                                                 sfp = <&sff1>;
 192                                         };
 193
 194                                         port@3 {
 195                                                 reg = <3>;
 196                                                 label = "eth_fc_1000_3";
 197                                                 phy-mode = "1000base-x";
 198                                                 managed = "in-band-status";
 199                                                 sfp = <&sff2>;
 200                                         };
 201
 202                                         port@4 {
 203                                                 reg = <4>;
 204                                                 label = "eth_fc_1000_4";
 205                                                 phy-mode = "1000base-x";
 206                                                 managed = "in-band-status";
 207                                                 sfp = <&sff3>;
 208                                         };
 209
 210                                         port@5 {
 211                                                 reg = <5>;
 212                                                 label = "eth_fc_1000_5";
 213                                                 phy-mode = "1000base-x";
 214                                                 managed = "in-band-status";
 215                                                 sfp = <&sff4>;
 216                                         };
 217
 218                                         port@6 {
 219                                                 reg = <6>;
 220                                                 label = "eth_fc_1000_6";
 221                                                 phy-mode = "1000base-x";
 222                                                 managed = "in-band-status";
 223                                                 sfp = <&sff5>;
 224                                         };
 225
 226                                         port@7 {
 227                                                 reg = <7>;
 228                                                 label = "eth_fc_1000_7";
 229                                                 phy-mode = "1000base-x";
 230                                                 managed = "in-band-status";
 231                                                 sfp = <&sff6>;
 232                                         };
 233
 234                                         port@9 {
 235                                                 reg = <9>;
 236                                                 label = "eth_fc_1000_1";
 237                                                 phy-mode = "1000base-x";
 238                                                 managed = "in-band-status";
 239                                                 sfp = <&sff0>;
 240                                         };
 241
 242                                         switch2port10: port@10 {
 243                                                 reg = <10>;
 244                                                 label = "dsa";
 245                                                 phy-mode = "2500base-x";
 246                                                 link = <&switch3port9
 247                                                         &switch1port9
 248                                                         &switch0port10>;
 249                                         };
 250                                 };
 251                         };
 252                 };
 253
 254                 mdio_mux_8: mdio@8 {
 255                         reg = <8>;
 256                         #address-cells = <1>;
 257                         #size-cells = <0>;
 258
 259                         switch3: switch3@0 {
 260                                 compatible = "marvell,mv88e6190";
 261                                 reg = <0>;
 262                                 dsa,member = <0 3>;
 263                                 eeprom-length = <65536>;
 264
 265                                 ports {
 266                                         #address-cells = <1>;
 267                                         #size-cells = <0>;
 268
 269                                         port@2 {
 270                                                 reg = <2>;
 271                                                 label = "eth_fc_1000_8";
 272                                                 phy-mode = "1000base-x";
 273                                                 managed = "in-band-status";
 274                                                 sfp = <&sff7>;
 275                                         };
 276
 277                                         port@3 {
 278                                                 reg = <3>;
 279                                                 label = "eth_fc_1000_9";
 280                                                 phy-mode = "1000base-x";
 281                                                 managed = "in-band-status";
 282                                                 sfp = <&sff8>;
 283                                         };
 284
 285                                         port@4 {
 286                                                 reg = <4>;
 287                                                 label = "eth_fc_1000_10";
 288                                                 phy-mode = "1000base-x";
 289                                                 managed = "in-band-status";
 290                                                 sfp = <&sff9>;
 291                                         };
 292
 293                                         switch3port9: port@9 {
 294                                                 reg = <9>;
 295                                                 label = "dsa";
 296                                                 phy-mode = "2500base-x";
 297                                                 link = <&switch2port10>;
 298                                         };
 299
 300                                         switch3port10: port@10 {
 301                                                 reg = <10>;
 302                                                 label = "dsa";
 303                                                 phy-mode = "xgmii";
 304                                                 link = <&switch1port9
 305                                                         &switch0port10>;
 306                                         };
 307                                 };
 308                         };
 309                 };
 310         };
 311
 312         sff0: sff0 {
 313                 compatible = "sff,sff";
 314                 i2c-bus = <&sff0_i2c>;
 315                 los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>;
 316                 tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
 317         };
 318
 319         sff1: sff1 {
 320                 compatible = "sff,sff";
 321                 i2c-bus = <&sff1_i2c>;
 322                 los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
 323                 tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 324         };
 325
 326         sff2: sff2 {
 327                 compatible = "sff,sff";
 328                 i2c-bus = <&sff2_i2c>;
 329                 los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
 330                 tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
 331         };
 332
 333         sff3: sff3 {
 334                 compatible = "sff,sff";
 335                 i2c-bus = <&sff3_i2c>;
 336                 los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
 337                 tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
 338         };
 339
 340         sff4: sff4 {
 341                 compatible = "sff,sff";
 342                 i2c-bus = <&sff4_i2c>;
 343                 los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
 344                 tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
 345         };
 346
 347         sff5: sff5 {
 348                 compatible = "sff,sff";
 349                 i2c-bus = <&sff5_i2c>;
 350                 los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
 351                 tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>;
 352         };
 353
 354         sff6: sff6 {
 355                 compatible = "sff,sff";
 356                 i2c-bus = <&sff6_i2c>;
 357                 los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
 358                 tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
 359         };
 360
 361         sff7: sff7 {
 362                 compatible = "sff,sff";
 363                 i2c-bus = <&sff7_i2c>;
 364                 los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>;
 365                 tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
 366         };
 367
 368         sff8: sff8 {
 369                 compatible = "sff,sff";
 370                 i2c-bus = <&sff8_i2c>;
 371                 los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>;
 372                 tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
 373         };
 374
 375         sff9: sff9 {
 376                 compatible = "sff,sff";
 377                 i2c-bus = <&sff9_i2c>;
 378                 los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>;
 379                 tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
 380         };
 381
 382         reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
 383                 compatible = "regulator-fixed";
 384                 regulator-name = "vcc_3v3_mcu";
 385                 regulator-min-microvolt = <3300000>;
 386                 regulator-max-microvolt = <3300000>;
 387         };
 388 };
 389
 390 &dspi0 {
 391         pinctrl-0 = <&pinctrl_dspi0>;
 392         pinctrl-names = "default";
 393         bus-num = <0>;
 394         status = "okay";
 395
 396         adc@5 {
 397                 compatible = "holt,hi8435";
 398                 reg = <5>;
 399                 gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
 400                 spi-max-frequency = <1000000>;
 401         };
 402 };
 403
 404 &dspi1 {
 405         bus-num = <1>;
 406         pinctrl-names = "default";
 407         pinctrl-0 = <&pinctrl_dspi1>;
 408         status = "okay";
 409
 410         flash@0 {
 411                 #address-cells = <1>;
 412                 #size-cells = <1>;
 413                 compatible = "jedec,spi-nor";
 414                 reg = <0>;
 415                 spi-max-frequency = <50000000>;
 416
 417                 partition@0 {
 418                         label = "m25p128-0";
 419                         reg = <0x0 0x01000000>;
 420                 };
 421         };
 422
 423         flash@1 {
 424                 #address-cells = <1>;
 425                 #size-cells = <1>;
 426                 compatible = "jedec,spi-nor";
 427                 reg = <1>;
 428                 spi-max-frequency = <50000000>;
 429
 430                 partition@0 {
 431                         label = "m25p128-1";
 432                         reg = <0x0 0x01000000>;
 433                 };
 434         };
 435 };
 436
 437 &adc0 {
 438         vref-supply = <&reg_vcc_3v3_mcu>;
 439         status = "okay";
 440 };
 441
 442 &adc1 {
 443         vref-supply = <&reg_vcc_3v3_mcu>;
 444         status = "okay";
 445 };
 446
 447 &edma0 {
 448         status = "okay";
 449 };
 450
 451 &edma1 {
 452         status = "okay";
 453 };
 454
 455 &esdhc0 {
 456         pinctrl-names = "default";
 457         pinctrl-0 = <&pinctrl_esdhc0>;
 458         bus-width = <8>;
 459         non-removable;
 460         no-1-8-v;
 461         no-sd;
 462         no-sdio;
 463         keep-power-in-suspend;
 464         status = "okay";
 465 };
 466
 467 &esdhc1 {
 468         pinctrl-names = "default";
 469         pinctrl-0 = <&pinctrl_esdhc1>;
 470         bus-width = <4>;
 471         no-sdio;
 472         status = "okay";
 473 };
 474
 475 &fec1 {
 476         phy-mode = "rmii";
 477         pinctrl-names = "default";
 478         pinctrl-0 = <&pinctrl_fec1>;
 479         status = "okay";
 480
 481         fixed-link {
 482                    speed = <100>;
 483                    full-duplex;
 484         };
 485
 486         mdio1: mdio {
 487                 #address-cells = <1>;
 488                 #size-cells = <0>;
 489         };
 490 };
 491
 492 &i2c0 {
 493         clock-frequency = <100000>;
 494         pinctrl-names = "default";
 495         pinctrl-0 = <&pinctrl_i2c0>;
 496         status = "okay";
 497
 498         gpio5: io-expander@20 {
 499                 compatible = "nxp,pca9554";
 500                 reg = <0x20>;
 501                 gpio-controller;
 502                 #gpio-cells = <2>;
 503         };
 504
 505         gpio6: io-expander@22 {
 506                 compatible = "nxp,pca9554";
 507                 reg = <0x22>;
 508                 gpio-controller;
 509                 #gpio-cells = <2>;
 510         };
 511
 512         temp-sensor@48 {
 513                 compatible = "national,lm75";
 514                 reg = <0x48>;
 515         };
 516
 517         eeprom@50 {
 518                 compatible = "atmel,24c04";
 519                 reg = <0x50>;
 520         };
 521
 522         eeprom@52 {
 523                 compatible = "atmel,24c04";
 524                 reg = <0x52>;
 525         };
 526
 527         elapsed-time-recorder@6b {
 528                 compatible = "dallas,ds1682";
 529                 reg = <0x6b>;
 530         };
 531 };
 532
 533 &i2c1 {
 534         clock-frequency = <100000>;
 535         pinctrl-names = "default";
 536         pinctrl-0 = <&pinctrl_i2c1>;
 537         status = "okay";
 538
 539         watchdog@38 {
 540                 compatible = "zii,rave-wdt";
 541                 reg = <0x38>;
 542         };
 543
 544         adc@4a {
 545                 compatible = "adi,adt7411";
 546                 reg = <0x4a>;
 547         };
 548 };
 549
 550 &i2c2 {
 551         clock-frequency = <100000>;
 552         pinctrl-names = "default";
 553         pinctrl-0 = <&pinctrl_i2c2>;
 554         status = "okay";
 555
 556         gpio9: io-expander@20 {
 557                 compatible = "semtech,sx1503q";
 558                 pinctrl-names = "default";
 559                 pinctrl-0 = <&pinctrl_sx1503_20>;
 560                 #gpio-cells = <2>;
 561                 reg = <0x20>;
 562                 gpio-controller;
 563                 interrupt-parent = <&gpio1>;
 564                 interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 565         };
 566
 567         temp-sensor@4e {
 568                 compatible = "national,lm75";
 569                 reg = <0x4e>;
 570         };
 571
 572         temp-sensor@4f {
 573                 compatible = "national,lm75";
 574                 reg = <0x4f>;
 575         };
 576
 577         gpio7: io-expander@23 {
 578                 compatible = "nxp,pca9555";
 579                 gpio-controller;
 580                 #gpio-cells = <2>;
 581                 reg = <0x23>;
 582         };
 583
 584         adc@4a {
 585                 compatible = "adi,adt7411";
 586                 reg = <0x4a>;
 587         };
 588
 589         eeprom@54 {
 590                 compatible = "atmel,24c08";
 591                 reg = <0x54>;
 592         };
 593
 594         i2c-mux@70 {
 595                 compatible = "nxp,pca9548";
 596                 pinctrl-names = "default";
 597                 #address-cells = <1>;
 598                 #size-cells = <0>;
 599                 reg = <0x70>;
 600                 i2c-mux-idle-disconnect;
 601
 602                 sff0_i2c: i2c@1 {
 603                         #address-cells = <1>;
 604                         #size-cells = <0>;
 605                         reg = <1>;
 606                 };
 607
 608                 sff1_i2c: i2c@2 {
 609                         #address-cells = <1>;
 610                         #size-cells = <0>;
 611                         reg = <2>;
 612                 };
 613
 614                 sff2_i2c: i2c@3 {
 615                         #address-cells = <1>;
 616                         #size-cells = <0>;
 617                         reg = <3>;
 618                 };
 619
 620                 sff3_i2c: i2c@4 {
 621                         #address-cells = <1>;
 622                         #size-cells = <0>;
 623                         reg = <4>;
 624                 };
 625
 626                 sff4_i2c: i2c@5 {
 627                         #address-cells = <1>;
 628                         #size-cells = <0>;
 629                         reg = <5>;
 630                 };
 631         };
 632
 633         i2c-mux@71 {
 634                 compatible = "nxp,pca9548";
 635                 pinctrl-names = "default";
 636                 reg = <0x71>;
 637                 #address-cells = <1>;
 638                 #size-cells = <0>;
 639                 i2c-mux-idle-disconnect;
 640
 641                 sff5_i2c: i2c@1 {
 642                         #address-cells = <1>;
 643                         #size-cells = <0>;
 644                         reg = <1>;
 645                 };
 646
 647                 sff6_i2c: i2c@2 {
 648                         #address-cells = <1>;
 649                         #size-cells = <0>;
 650                         reg = <2>;
 651                 };
 652
 653                 sff7_i2c: i2c@3 {
 654                         #address-cells = <1>;
 655                         #size-cells = <0>;
 656                         reg = <3>;
 657                 };
 658
 659                 sff8_i2c: i2c@4 {
 660                         #address-cells = <1>;
 661                         #size-cells = <0>;
 662                         reg = <4>;
 663                 };
 664
 665                 sff9_i2c: i2c@5 {
 666                         #address-cells = <1>;
 667                         #size-cells = <0>;
 668                         reg = <5>;
 669                 };
 670         };
 671 };
 672
 673 &snvsrtc {
 674         status = "disabled";
 675 };
 676
 677 &uart0 {
 678         pinctrl-names = "default";
 679         pinctrl-0 = <&pinctrl_uart0>;
 680         status = "okay";
 681 };
 682
 683 &uart1 {
 684         linux,rs485-enabled-at-boot-time;
 685         pinctrl-names = "default";
 686         pinctrl-0 = <&pinctrl_uart1>;
 687         status = "okay";
 688 };
 689
 690 &uart2 {
 691         linux,rs485-enabled-at-boot-time;
 692         pinctrl-names = "default";
 693         pinctrl-0 = <&pinctrl_uart2>;
 694         status = "okay";
 695 };
 696
 697 &iomuxc {
 698         pinctrl_dspi0: dspi0grp {
 699                 fsl,pins = <
 700                         VF610_PAD_PTB19__DSPI0_CS0              0x1182
 701                         VF610_PAD_PTB18__DSPI0_CS1              0x1182
 702                         VF610_PAD_PTB13__DSPI0_CS4              0x1182
 703                         VF610_PAD_PTB12__DSPI0_CS5              0x1182
 704                         VF610_PAD_PTB20__DSPI0_SIN              0x1181
 705                         VF610_PAD_PTB21__DSPI0_SOUT             0x1182
 706                         VF610_PAD_PTB22__DSPI0_SCK              0x1182
 707                 >;
 708         };
 709
 710         pinctrl_dspi1: dspi1grp {
 711                 fsl,pins = <
 712                         VF610_PAD_PTD5__DSPI1_CS0               0x1182
 713                         VF610_PAD_PTD4__DSPI1_CS1               0x1182
 714                         VF610_PAD_PTC6__DSPI1_SIN               0x1181
 715                         VF610_PAD_PTC7__DSPI1_SOUT              0x1182
 716                         VF610_PAD_PTC8__DSPI1_SCK               0x1182
 717                 >;
 718         };
 719
 720         pinctrl_dspi2: dspi2gpio {
 721                 fsl,pins = <
 722                         VF610_PAD_PTD30__GPIO_64                0x33e2
 723                         VF610_PAD_PTD29__GPIO_65                0x33e1
 724                         VF610_PAD_PTD28__GPIO_66                0x33e2
 725                         VF610_PAD_PTD27__GPIO_67                0x33e2
 726                         VF610_PAD_PTD26__GPIO_68                0x31c2
 727                 >;
 728         };
 729
 730         pinctrl_esdhc0: esdhc0grp {
 731                 fsl,pins = <
 732                         VF610_PAD_PTC0__ESDHC0_CLK              0x31ef
 733                         VF610_PAD_PTC1__ESDHC0_CMD              0x31ef
 734                         VF610_PAD_PTC2__ESDHC0_DAT0             0x31ef
 735                         VF610_PAD_PTC3__ESDHC0_DAT1             0x31ef
 736                         VF610_PAD_PTC4__ESDHC0_DAT2             0x31ef
 737                         VF610_PAD_PTC5__ESDHC0_DAT3             0x31ef
 738                         VF610_PAD_PTD23__ESDHC0_DAT4            0x31ef
 739                         VF610_PAD_PTD22__ESDHC0_DAT5            0x31ef
 740                         VF610_PAD_PTD21__ESDHC0_DAT6            0x31ef
 741                         VF610_PAD_PTD20__ESDHC0_DAT7            0x31ef
 742                 >;
 743         };
 744
 745         pinctrl_esdhc1: esdhc1grp {
 746                 fsl,pins = <
 747                         VF610_PAD_PTA24__ESDHC1_CLK             0x31ef
 748                         VF610_PAD_PTA25__ESDHC1_CMD             0x31ef
 749                         VF610_PAD_PTA26__ESDHC1_DAT0            0x31ef
 750                         VF610_PAD_PTA27__ESDHC1_DAT1            0x31ef
 751                         VF610_PAD_PTA28__ESDHC1_DATA2           0x31ef
 752                         VF610_PAD_PTA29__ESDHC1_DAT3            0x31ef
 753                 >;
 754         };
 755
 756         pinctrl_fec1: fec1grp {
 757                 fsl,pins = <
 758                         VF610_PAD_PTA6__RMII_CLKIN              0x30d1
 759                         VF610_PAD_PTC9__ENET_RMII1_MDC          0x30d2
 760                         VF610_PAD_PTC10__ENET_RMII1_MDIO        0x30d3
 761                         VF610_PAD_PTC11__ENET_RMII1_CRS         0x30d1
 762                         VF610_PAD_PTC12__ENET_RMII1_RXD1        0x30d1
 763                         VF610_PAD_PTC13__ENET_RMII1_RXD0        0x30d1
 764                         VF610_PAD_PTC14__ENET_RMII1_RXER        0x30d1
 765                         VF610_PAD_PTC15__ENET_RMII1_TXD1        0x30d2
 766                         VF610_PAD_PTC16__ENET_RMII1_TXD0        0x30d2
 767                         VF610_PAD_PTC17__ENET_RMII1_TXEN        0x30d2
 768                 >;
 769         };
 770
 771         pinctrl_i2c0: i2c0grp {
 772                 fsl,pins = <
 773                         VF610_PAD_PTB14__I2C0_SCL               0x37ff
 774                         VF610_PAD_PTB15__I2C0_SDA               0x37ff
 775                 >;
 776         };
 777
 778         pinctrl_i2c1: i2c1grp {
 779                 fsl,pins = <
 780                         VF610_PAD_PTB16__I2C1_SCL               0x37ff
 781                         VF610_PAD_PTB17__I2C1_SDA               0x37ff
 782                 >;
 783         };
 784
 785         pinctrl_i2c2: i2c2grp {
 786                 fsl,pins = <
 787                         VF610_PAD_PTA22__I2C2_SCL               0x37ff
 788                         VF610_PAD_PTA23__I2C2_SDA               0x37ff
 789                 >;
 790         };
 791
 792         pinctrl_leds_debug: pinctrl-leds-debug {
 793                 fsl,pins = <
 794                          VF610_PAD_PTB26__GPIO_96               0x31c2
 795                    >;
 796         };
 797
 798         pinctrl_mdio_mux: pinctrl-mdio-mux {
 799                 fsl,pins = <
 800                         VF610_PAD_PTE27__GPIO_132               0x31c2
 801                         VF610_PAD_PTE28__GPIO_133               0x31c2
 802                         VF610_PAD_PTE21__GPIO_126               0x31c2
 803                         VF610_PAD_PTE22__GPIO_127               0x31c2
 804                 >;
 805         };
 806
 807         pinctrl_qspi0: qspi0grp {
 808                 fsl,pins = <
 809                         VF610_PAD_PTD7__QSPI0_B_QSCK            0x31c3
 810                         VF610_PAD_PTD8__QSPI0_B_CS0             0x31ff
 811                         VF610_PAD_PTD9__QSPI0_B_DATA3           0x31c3
 812                         VF610_PAD_PTD10__QSPI0_B_DATA2          0x31c3
 813                         VF610_PAD_PTD11__QSPI0_B_DATA1          0x31c3
 814                         VF610_PAD_PTD12__QSPI0_B_DATA0          0x31c3
 815                 >;
 816         };
 817
 818         pinctrl_sx1503_20: pinctrl-sx1503-20 {
 819                 fsl,pins = <
 820                         VF610_PAD_PTD31__GPIO_63                0x219d
 821                         >;
 822         };
 823
 824         pinctrl_uart0: uart0grp {
 825                 fsl,pins = <
 826                         VF610_PAD_PTB10__UART0_TX               0x21a2
 827                         VF610_PAD_PTB11__UART0_RX               0x21a1
 828                 >;
 829         };
 830
 831         pinctrl_uart1: uart1grp {
 832                 fsl,pins = <
 833                         VF610_PAD_PTB23__UART1_TX               0x21a2
 834                         VF610_PAD_PTB24__UART1_RX               0x21a1
 835                         VF610_PAD_PTB25__UART1_RTS              0x21a2  /* Used as DE signal for the RS-485 transceiver */
 836                 >;
 837         };
 838
 839         pinctrl_uart2: uart2grp {
 840                 fsl,pins = <
 841                         VF610_PAD_PTD0__UART2_TX                0x21a2
 842                         VF610_PAD_PTD1__UART2_RX                0x21a1
 843                         VF610_PAD_PTD2__UART2_RTS               0x21a2 /* Used as DE signal for the RS-485 transceiver */
 844                 >;
 845         };
 846 };