WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / mach-ixp4xx / include / mach / platform.h
blob6d403fe0bf529a0ad21efcf538815c5df87efd11
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * arch/arm/mach-ixp4xx/include/mach/platform.h
5 * Constants and functions that are useful to IXP4xx platform-specific code
6 * and device drivers.
8 * Copyright (C) 2004 MontaVista Software, Inc.
9 */
11 #ifndef __ASM_ARCH_HARDWARE_H__
12 #error "Do not include this directly, instead #include <mach/hardware.h>"
13 #endif
15 #ifndef __ASSEMBLY__
17 #include <linux/reboot.h>
18 #include <linux/platform_data/eth_ixp4xx.h>
20 #include <asm/types.h>
22 #ifndef __ARMEB__
23 #define REG_OFFSET 0
24 #else
25 #define REG_OFFSET 3
26 #endif
29 * Expansion bus memory regions
31 #define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000)
34 * The expansion bus on the IXP4xx can be configured for either 16 or
35 * 32MB windows and the CS offset for each region changes based on the
36 * current configuration. This means that we cannot simply hardcode
37 * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
38 * as setup by the bootloader to determine our window size.
40 extern unsigned long ixp4xx_exp_bus_size;
42 #define IXP4XX_EXP_BUS_BASE(region)\
43 (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
45 #define IXP4XX_EXP_BUS_END(region)\
46 (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
48 /* Those macros can be used to adjust timing and configure
49 * other features for each region.
52 #define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16)
53 #define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20)
54 #define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22)
55 #define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26)
56 #define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28)
57 #define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10)
58 #define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14)
60 #define IXP4XX_EXP_BUS_CS_EN (1L << 31)
61 #define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6)
62 #define IXP4XX_EXP_BUS_HRDY_POL (1L << 5)
63 #define IXP4XX_EXP_BUS_MUX_EN (1L << 4)
64 #define IXP4XX_EXP_BUS_SPLT_EN (1L << 3)
65 #define IXP4XX_EXP_BUS_WR_EN (1L << 1)
66 #define IXP4XX_EXP_BUS_BYTE_EN (1L << 0)
68 #define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00
69 #define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01
70 #define IXP4XX_EXP_BUS_CYCLES_HPI 0x02
72 #define IXP4XX_FLASH_WRITABLE (0x2)
73 #define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
74 #define IXP4XX_FLASH_WRITE (0xbcd23c42)
77 * Clock Speed Definitions.
79 #define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66MHzi APB BUS */
80 #define IXP4XX_UART_XTAL 14745600
83 * This structure provide a means for the board setup code
84 * to give information to th pata_ixp4xx driver. It is
85 * passed as platform_data.
87 struct ixp4xx_pata_data {
88 volatile u32 *cs0_cfg;
89 volatile u32 *cs1_cfg;
90 unsigned long cs0_bits;
91 unsigned long cs1_bits;
92 void __iomem *cs0;
93 void __iomem *cs1;
97 * Frequency of clock used for primary clocksource
99 extern unsigned long ixp4xx_timer_freq;
102 * Functions used by platform-level setup code
104 extern void ixp4xx_map_io(void);
105 extern void ixp4xx_init_early(void);
106 extern void ixp4xx_init_irq(void);
107 extern void ixp4xx_sys_init(void);
108 extern void ixp4xx_timer_init(void);
109 extern void ixp4xx_restart(enum reboot_mode, const char *);
110 extern void ixp4xx_pci_preinit(void);
111 struct pci_sys_data;
112 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
113 extern struct pci_ops ixp4xx_ops;
115 #endif // __ASSEMBLY__