WIP FPC-III support
[linux/fpc-iii.git] / arch / arm64 / boot / dts / freescale / fsl-ls208xa-qds.dtsi
blob10d2fe0919651a151b534de871fb70eab83d99e2
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Device Tree file for Freescale LS2080A QDS Board.
4  *
5  * Copyright 2016 Freescale Semiconductor, Inc.
6  * Copyright 2017 NXP
7  *
8  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
9  *
10  */
12 &esdhc {
13         mmc-hs200-1_8v;
14         status = "okay";
17 &ifc {
18         status = "okay";
19         #address-cells = <2>;
20         #size-cells = <1>;
21         ranges = <0x0 0x0 0x5 0x80000000 0x08000000
22                   0x2 0x0 0x5 0x30000000 0x00010000
23                   0x3 0x0 0x5 0x20000000 0x00010000>;
25         nor@0,0 {
26                 #address-cells = <1>;
27                 #size-cells = <1>;
28                 compatible = "cfi-flash";
29                 reg = <0x0 0x0 0x8000000>;
30                 bank-width = <2>;
31                 device-width = <1>;
32         };
34         nand@2,0 {
35              compatible = "fsl,ifc-nand";
36              reg = <0x2 0x0 0x10000>;
37         };
39         cpld@3,0 {
40              reg = <0x3 0x0 0x10000>;
41              compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
42         };
45 &i2c0 {
46         status = "okay";
47         pca9547@77 {
48                 compatible = "nxp,pca9547";
49                 reg = <0x77>;
50                 #address-cells = <1>;
51                 #size-cells = <0>;
52                 i2c@0 {
53                         #address-cells = <1>;
54                         #size-cells = <0>;
55                         reg = <0x00>;
56                         rtc@68 {
57                                 compatible = "dallas,ds3232";
58                                 reg = <0x68>;
59                         };
60                 };
62                 i2c@2 {
63                         #address-cells = <1>;
64                         #size-cells = <0>;
65                         reg = <0x02>;
67                         ina220@40 {
68                                 compatible = "ti,ina220";
69                                 reg = <0x40>;
70                                 shunt-resistor = <500>;
71                         };
73                         ina220@41 {
74                                 compatible = "ti,ina220";
75                                 reg = <0x41>;
76                                 shunt-resistor = <1000>;
77                         };
78                 };
80                 i2c@3 {
81                         #address-cells = <1>;
82                         #size-cells = <0>;
83                         reg = <0x3>;
85                         adt7481@4c {
86                                 compatible = "adi,adt7461";
87                                 reg = <0x4c>;
88                         };
89                 };
90         };
93 &i2c1 {
94         status = "disabled";
97 &i2c2 {
98         status = "disabled";
101 &i2c3 {
102         status = "disabled";
105 &dspi {
106         status = "okay";
107         dflash0: n25q128a@0 {
108                 #address-cells = <1>;
109                 #size-cells = <1>;
110                 compatible = "st,m25p80";
111                 spi-max-frequency = <3000000>;
112                 reg = <0>;
113         };
114         dflash1: sst25wf040b@1 {
115                 #address-cells = <1>;
116                 #size-cells = <1>;
117                 compatible = "st,m25p80";
118                 spi-max-frequency = <3000000>;
119                 reg = <1>;
120         };
121         dflash2: en25s64@2 {
122                 #address-cells = <1>;
123                 #size-cells = <1>;
124                 compatible = "st,m25p80";
125                 spi-max-frequency = <3000000>;
126                 reg = <2>;
127         };
130 &qspi {
131         status = "okay";
132         flash0: s25fl256s1@0 {
133                 #address-cells = <1>;
134                 #size-cells = <1>;
135                 compatible = "st,m25p80";
136                 spi-max-frequency = <20000000>;
137                 spi-rx-bus-width = <4>;
138                 spi-tx-bus-width = <4>;
139                 reg = <0>;
140         };
141         flash2: s25fl256s1@2 {
142                 #address-cells = <1>;
143                 #size-cells = <1>;
144                 compatible = "st,m25p80";
145                 spi-max-frequency = <20000000>;
146                 spi-rx-bus-width = <4>;
147                 spi-tx-bus-width = <4>;
148                 reg = <2>;
149         };
152 &sata0 {
153         status = "okay";
156 &sata1 {
157         status = "okay";
160 &usb0 {
161         status = "okay";
164 &usb1 {
165         status = "okay";