arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 //
   3 // Device Tree file for LX2160ARDB
   4 //
   5 // Copyright 2018 NXP
   6
   7 /dts-v1/;
   8
   9 #include "fsl-lx2160a.dtsi"
  10
  11 / {
  12         model = "NXP Layerscape LX2160ARDB";
  13         compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
  14
  15         aliases {
  16                 crypto = &crypto;
  17                 serial0 = &uart0;
  18         };
  19
  20         chosen {
  21                 stdout-path = "serial0:115200n8";
  22         };
  23
  24         sb_3v3: regulator-sb3v3 {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "MC34717-3.3VSB";
  27                 regulator-min-microvolt = <3300000>;
  28                 regulator-max-microvolt = <3300000>;
  29                 regulator-boot-on;
  30                 regulator-always-on;
  31         };
  32 };
  33
  34 &crypto {
  35         status = "okay";
  36 };
  37
  38 &dpmac3 {
  39         phy-handle = <&aquantia_phy1>;
  40         phy-connection-type = "usxgmii";
  41         managed = "in-band-status";
  42 };
  43
  44 &dpmac4 {
  45         phy-handle = <&aquantia_phy2>;
  46         phy-connection-type = "usxgmii";
  47         managed = "in-band-status";
  48 };
  49
  50 &dpmac17 {
  51         phy-handle = <&rgmii_phy1>;
  52         phy-connection-type = "rgmii-id";
  53 };
  54
  55 &dpmac18 {
  56         phy-handle = <&rgmii_phy2>;
  57         phy-connection-type = "rgmii-id";
  58 };
  59
  60 &emdio1 {
  61         status = "okay";
  62
  63         rgmii_phy1: ethernet-phy@1 {
  64                 /* AR8035 PHY */
  65                 compatible = "ethernet-phy-id004d.d072";
  66                 reg = <0x1>;
  67                 eee-broken-1000t;
  68         };
  69
  70         rgmii_phy2: ethernet-phy@2 {
  71                 /* AR8035 PHY */
  72                 compatible = "ethernet-phy-id004d.d072";
  73                 reg = <0x2>;
  74                 eee-broken-1000t;
  75         };
  76
  77         aquantia_phy1: ethernet-phy@4 {
  78                 /* AQR107 PHY */
  79                 compatible = "ethernet-phy-ieee802.3-c45";
  80                 reg = <0x4>;
  81         };
  82
  83         aquantia_phy2: ethernet-phy@5 {
  84                 /* AQR107 PHY */
  85                 compatible = "ethernet-phy-ieee802.3-c45";
  86                 reg = <0x5>;
  87         };
  88 };
  89
  90 &esdhc0 {
  91         sd-uhs-sdr104;
  92         sd-uhs-sdr50;
  93         sd-uhs-sdr25;
  94         sd-uhs-sdr12;
  95         status = "okay";
  96 };
  97
  98 &esdhc1 {
  99         mmc-hs200-1_8v;
 100         mmc-hs400-1_8v;
 101         bus-width = <8>;
 102         status = "okay";
 103 };
 104
 105 &fspi {
 106         status = "okay";
 107
 108         mt35xu512aba0: flash@0 {
 109                 #address-cells = <1>;
 110                 #size-cells = <1>;
 111                 compatible = "jedec,spi-nor";
 112                 m25p,fast-read;
 113                 spi-max-frequency = <50000000>;
 114                 reg = <0>;
 115                 spi-rx-bus-width = <8>;
 116                 spi-tx-bus-width = <8>;
 117         };
 118
 119         mt35xu512aba1: flash@1 {
 120                 #address-cells = <1>;
 121                 #size-cells = <1>;
 122                 compatible = "jedec,spi-nor";
 123                 m25p,fast-read;
 124                 spi-max-frequency = <50000000>;
 125                 reg = <1>;
 126                 spi-rx-bus-width = <8>;
 127                 spi-tx-bus-width = <8>;
 128         };
 129 };
 130
 131 &i2c0 {
 132         status = "okay";
 133
 134         i2c-mux@77 {
 135                 compatible = "nxp,pca9547";
 136                 reg = <0x77>;
 137                 #address-cells = <1>;
 138                 #size-cells = <0>;
 139
 140                 i2c@2 {
 141                         #address-cells = <1>;
 142                         #size-cells = <0>;
 143                         reg = <0x2>;
 144
 145                         power-monitor@40 {
 146                                 compatible = "ti,ina220";
 147                                 reg = <0x40>;
 148                                 shunt-resistor = <500>;
 149                         };
 150                 };
 151
 152                 i2c@3 {
 153                         #address-cells = <1>;
 154                         #size-cells = <0>;
 155                         reg = <0x3>;
 156
 157                         temperature-sensor@4c {
 158                                 compatible = "nxp,sa56004";
 159                                 reg = <0x4c>;
 160                                 vcc-supply = <&sb_3v3>;
 161                         };
 162
 163                         temperature-sensor@4d {
 164                                 compatible = "nxp,sa56004";
 165                                 reg = <0x4d>;
 166                                 vcc-supply = <&sb_3v3>;
 167                         };
 168                 };
 169         };
 170 };
 171
 172 &i2c4 {
 173         status = "okay";
 174
 175         rtc@51 {
 176                 compatible = "nxp,pcf2129";
 177                 reg = <0x51>;
 178                 // IRQ10_B
 179                 interrupts = <0 150 0x4>;
 180         };
 181 };
 182
 183 &pcs_mdio3 {
 184         status = "okay";
 185 };
 186
 187 &pcs_mdio4 {
 188         status = "okay";
 189 };
 190
 191 &sata0 {
 192         status = "okay";
 193 };
 194
 195 &sata1 {
 196         status = "okay";
 197 };
 198
 199 &sata2 {
 200         status = "okay";
 201 };
 202
 203 &sata3 {
 204         status = "okay";
 205 };
 206
 207 &uart0 {
 208         status = "okay";
 209 };
 210
 211 &uart1 {
 212         status = "okay";
 213 };
 214
 215 &usb0 {
 216         status = "okay";
 217 };
 218
 219 &usb1 {
 220         status = "okay";
 221 };