arch/arm64/boot/dts/freescale/s32v234.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2015-2016 Freescale Semiconductor, Inc.
   4  * Copyright 2016-2018 NXP
   5  */
   6
   7 #include <dt-bindings/interrupt-controller/arm-gic.h>
   8
   9 /memreserve/ 0x80000000 0x00010000;
  10
  11 / {
  12         compatible = "fsl,s32v234";
  13         interrupt-parent = <&gic>;
  14         #address-cells = <2>;
  15         #size-cells = <2>;
  16
  17         aliases {
  18                 serial0 = &uart0;
  19                 serial1 = &uart1;
  20         };
  21
  22         cpus {
  23                 #address-cells = <2>;
  24                 #size-cells = <0>;
  25
  26                 cpu0: cpu@0 {
  27                         device_type = "cpu";
  28                         compatible = "arm,cortex-a53";
  29                         reg = <0x0 0x0>;
  30                         enable-method = "spin-table";
  31                         cpu-release-addr = <0x0 0x80000000>;
  32                         next-level-cache = <&cluster0_l2_cache>;
  33                 };
  34
  35                 cpu1: cpu@1 {
  36                         device_type = "cpu";
  37                         compatible = "arm,cortex-a53";
  38                         reg = <0x0 0x1>;
  39                         enable-method = "spin-table";
  40                         cpu-release-addr = <0x0 0x80000000>;
  41                         next-level-cache = <&cluster0_l2_cache>;
  42                 };
  43
  44                 cpu2: cpu@100 {
  45                         device_type = "cpu";
  46                         compatible = "arm,cortex-a53";
  47                         reg = <0x0 0x100>;
  48                         enable-method = "spin-table";
  49                         cpu-release-addr = <0x0 0x80000000>;
  50                         next-level-cache = <&cluster1_l2_cache>;
  51                 };
  52
  53                 cpu3: cpu@101 {
  54                         device_type = "cpu";
  55                         compatible = "arm,cortex-a53";
  56                         reg = <0x0 0x101>;
  57                         enable-method = "spin-table";
  58                         cpu-release-addr = <0x0 0x80000000>;
  59                         next-level-cache = <&cluster1_l2_cache>;
  60                 };
  61
  62                 cluster0_l2_cache: l2-cache0 {
  63                         compatible = "cache";
  64                 };
  65
  66                 cluster1_l2_cache: l2-cache1 {
  67                         compatible = "cache";
  68                 };
  69         };
  70
  71         timer {
  72                 compatible = "arm,armv8-timer";
  73                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
  74                                           IRQ_TYPE_LEVEL_LOW)>,
  75                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
  76                                           IRQ_TYPE_LEVEL_LOW)>,
  77                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
  78                                           IRQ_TYPE_LEVEL_LOW)>,
  79                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
  80                                           IRQ_TYPE_LEVEL_LOW)>;
  81                 /* clock-frequency might be modified by u-boot, depending on the
  82                  * chip version.
  83                  */
  84                 clock-frequency = <10000000>;
  85         };
  86
  87         gic: interrupt-controller@7d001000 {
  88                 compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
  89                 #interrupt-cells = <3>;
  90                 #address-cells = <0>;
  91                 interrupt-controller;
  92                 reg = <0 0x7d001000 0 0x1000>,
  93                       <0 0x7d002000 0 0x2000>,
  94                       <0 0x7d004000 0 0x2000>,
  95                       <0 0x7d006000 0 0x2000>;
  96                 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
  97                                          IRQ_TYPE_LEVEL_HIGH)>;
  98         };
  99
 100         soc {
 101                 #address-cells = <2>;
 102                 #size-cells = <2>;
 103                 compatible = "simple-bus";
 104                 interrupt-parent = <&gic>;
 105                 ranges;
 106
 107                 aips0: bus@40000000 {
 108                         compatible = "simple-bus";
 109                         #address-cells = <2>;
 110                         #size-cells = <2>;
 111                         interrupt-parent = <&gic>;
 112                         reg = <0x0 0x40000000 0x0 0x7d000>;
 113                         ranges;
 114
 115                         uart0: serial@40053000 {
 116                                 compatible = "fsl,s32v234-linflexuart";
 117                                 reg = <0x0 0x40053000 0x0 0x1000>;
 118                                 interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
 119                                 status = "disabled";
 120                         };
 121                 };
 122
 123                 aips1: bus@40080000 {
 124                         compatible = "simple-bus";
 125                         #address-cells = <2>;
 126                         #size-cells = <2>;
 127                         interrupt-parent = <&gic>;
 128                         reg = <0x0 0x40080000 0x0 0x70000>;
 129                         ranges;
 130
 131                         uart1: serial@400bc000 {
 132                                 compatible = "fsl,s32v234-linflexuart";
 133                                 reg = <0x0 0x400bc000 0x0 0x1000>;
 134                                 interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>;
 135                                 status = "disabled";
 136                         };
 137                 };
 138         };
 139 };