arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Google Gru-scarlet board device tree source
   4  *
   5  * Copyright 2018 Google, Inc
   6  */
   7
   8 #include "rk3399-gru.dtsi"
   9
  10 /{
  11         /* Power tree */
  12
  13         /* ppvar_sys children, sorted by name */
  14         pp1250_s3: pp1250-s3 {
  15                 compatible = "regulator-fixed";
  16                 regulator-name = "pp1250_s3";
  17
  18                 /* EC turns on w/ pp1250_s3_en; always on for AP */
  19                 regulator-always-on;
  20                 regulator-boot-on;
  21                 regulator-min-microvolt = <1250000>;
  22                 regulator-max-microvolt = <1250000>;
  23
  24                 vin-supply = <&ppvar_sys>;
  25         };
  26
  27         pp1250_cam: pp1250-dvdd {
  28                 compatible = "regulator-fixed";
  29                 regulator-name = "pp1250_dvdd";
  30                 pinctrl-names = "default";
  31                 pinctrl-0 = <&pp1250_cam_en>;
  32
  33                 enable-active-high;
  34                 gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
  35
  36                 /* 740us delay from gpio output high to pp1250 stable,
  37                  * rounding up to 1ms for safety.
  38                  */
  39                 startup-delay-us = <1000>;
  40                 vin-supply = <&pp1250_s3>;
  41         };
  42
  43         pp900_s0: pp900-s0 {
  44                 compatible = "regulator-fixed";
  45                 regulator-name = "pp900_s0";
  46
  47                 /* EC turns on w/ pp900_s0_en; always on for AP */
  48                 regulator-always-on;
  49                 regulator-boot-on;
  50                 regulator-min-microvolt = <900000>;
  51                 regulator-max-microvolt = <900000>;
  52
  53                 vin-supply = <&ppvar_sys>;
  54         };
  55
  56         ppvarn_lcd: ppvarn-lcd {
  57                 compatible = "regulator-fixed";
  58                 regulator-name = "ppvarn_lcd";
  59                 pinctrl-names = "default";
  60                 pinctrl-0 = <&ppvarn_lcd_en>;
  61
  62                 enable-active-high;
  63                 gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
  64                 vin-supply = <&ppvar_sys>;
  65         };
  66
  67         ppvarp_lcd: ppvarp-lcd {
  68                 compatible = "regulator-fixed";
  69                 regulator-name = "ppvarp_lcd";
  70                 pinctrl-names = "default";
  71                 pinctrl-0 = <&ppvarp_lcd_en>;
  72
  73                 enable-active-high;
  74                 gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
  75                 vin-supply = <&ppvar_sys>;
  76         };
  77
  78         /* pp1800 children, sorted by name */
  79         pp900_s3: pp900-s3 {
  80                 compatible = "regulator-fixed";
  81                 regulator-name = "pp900_s3";
  82
  83                 /* EC turns on w/ pp900_s3_en; always on for AP */
  84                 regulator-always-on;
  85                 regulator-boot-on;
  86                 regulator-min-microvolt = <900000>;
  87                 regulator-max-microvolt = <900000>;
  88
  89                 vin-supply = <&pp1800>;
  90         };
  91
  92         /* EC turns on pp1800_s3_en */
  93         pp1800_s3: pp1800 {
  94         };
  95
  96         /* pp3300 children, sorted by name */
  97         pp2800_cam: pp2800-avdd {
  98                 compatible = "regulator-fixed";
  99                 regulator-name = "pp2800_avdd";
 100                 pinctrl-names = "default";
 101                 pinctrl-0 = <&pp2800_cam_en>;
 102
 103                 enable-active-high;
 104                 gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 105                 startup-delay-us = <100>;
 106                 vin-supply = <&pp3300>;
 107         };
 108
 109         /* EC turns on pp3300_s0_en */
 110         pp3300_s0: pp3300 {
 111         };
 112
 113         /* EC turns on pp3300_s3_en */
 114         pp3300_s3: pp3300 {
 115         };
 116
 117         /*
 118          * See b/66922012
 119          *
 120          * This is a hack to make sure the Bluetooth part of the QCA6174A
 121          * is reset at boot by toggling BT_EN. At boot BT_EN is first set
 122          * to low when the bt_3v3 regulator is registered (in disabled
 123          * state). The fake regulator is configured as a supply of the
 124          * wlan_3v3 regulator below. When wlan_3v3 is enabled early in
 125          * the boot process it also enables its supply regulator bt_3v3,
 126          * which changes BT_EN to high.
 127          */
 128         bt_3v3: bt-3v3 {
 129                 compatible = "regulator-fixed";
 130                 regulator-name = "bt_3v3";
 131                 pinctrl-names = "default";
 132                 pinctrl-0 = <&bt_en_1v8_l>;
 133
 134                 enable-active-high;
 135                 gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 136                 vin-supply = <&pp3300_s3>;
 137         };
 138
 139         wlan_3v3: wlan-3v3 {
 140                 compatible = "regulator-fixed";
 141                 regulator-name = "wlan_3v3";
 142                 pinctrl-names = "default";
 143                 pinctrl-0 = <&wlan_pd_1v8_l>;
 144
 145                 /*
 146                  * The WL_EN pin is driven low when the regulator is
 147                  * registered, and transitions to high when the PCIe bus
 148                  * is powered up.
 149                  */
 150                 enable-active-high;
 151                 gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 152
 153                 /*
 154                  * Require minimum 10ms from power-on (e.g., PD#) to init PCIe.
 155                  * TODO (b/64444991): how long to assert PD#?
 156                  */
 157                 regulator-enable-ramp-delay = <10000>;
 158                 /* See bt_3v3 hack above */
 159                 vin-supply = <&bt_3v3>;
 160         };
 161
 162         backlight: backlight {
 163                 compatible = "pwm-backlight";
 164                 enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 165                 pinctrl-names = "default";
 166                 pinctrl-0 = <&bl_en>;
 167                 pwms = <&pwm1 0 1000000 0>;
 168                 pwm-delay-us = <10000>;
 169         };
 170
 171         dmic: dmic {
 172                 compatible = "dmic-codec";
 173                 dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 174                 pinctrl-names = "default";
 175                 pinctrl-0 = <&dmic_en>;
 176                 wakeup-delay-ms = <250>;
 177         };
 178
 179         gpio_keys: gpio-keys {
 180                 compatible = "gpio-keys";
 181                 pinctrl-names = "default";
 182                 pinctrl-0 = <&pen_eject_odl>;
 183
 184                 pen-insert {
 185                         label = "Pen Insert";
 186                         /* Insert = low, eject = high */
 187                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 188                         linux,code = <SW_PEN_INSERTED>;
 189                         linux,input-type = <EV_SW>;
 190                         wakeup-source;
 191                 };
 192         };
 193 };
 194
 195 /* pp900_s0 aliases */
 196 pp900_ddrpll_ap: &pp900_s0 {
 197 };
 198 pp900_pcie: &pp900_s0 {
 199 };
 200 pp900_usb: &pp900_s0 {
 201 };
 202
 203 /* pp900_s3 aliases */
 204 pp900_emmcpll: &pp900_s3 {
 205 };
 206
 207 /* EC turns on; alias for pp1800_s0 */
 208 pp1800_pcie: &pp1800_s0 {
 209 };
 210
 211 /* On scarlet PPVAR(big_cpu, lit_cpu, gpu) need to adjust voltage ranges */
 212 &ppvar_bigcpu {
 213         ctrl-voltage-range = <800074 1299226>;
 214         regulator-min-microvolt = <800074>;
 215         regulator-max-microvolt = <1299226>;
 216 };
 217
 218 &ppvar_bigcpu_pwm {
 219         /* On scarlet ppvar big cpu use pwm3 */
 220         pwms = <&pwm3 0 3337 0>;
 221         regulator-min-microvolt = <800074>;
 222         regulator-max-microvolt = <1299226>;
 223 };
 224
 225 &ppvar_litcpu {
 226         ctrl-voltage-range = <802122 1199620>;
 227         regulator-min-microvolt = <802122>;
 228         regulator-max-microvolt = <1199620>;
 229 };
 230
 231 &ppvar_litcpu_pwm {
 232         regulator-min-microvolt = <802122>;
 233         regulator-max-microvolt = <1199620>;
 234 };
 235
 236 &ppvar_gpu {
 237         ctrl-voltage-range = <799600 1099600>;
 238         regulator-min-microvolt = <799600>;
 239         regulator-max-microvolt = <1099600>;
 240 };
 241
 242 &ppvar_gpu_pwm {
 243         regulator-min-microvolt = <799600>;
 244         regulator-max-microvolt = <1099600>;
 245 };
 246
 247 &ppvar_sd_card_io {
 248         states = <1800000 0x0 3300000 0x1>;
 249         regulator-max-microvolt = <3300000>;
 250 };
 251
 252 &pp3000_sd_slot {
 253         vin-supply = <&pp3300>;
 254 };
 255
 256 ap_i2c_dig: &i2c2 {
 257         status = "okay";
 258
 259         clock-frequency = <400000>;
 260
 261         /* These are relatively safe rise/fall times. */
 262         i2c-scl-falling-time-ns = <50>;
 263         i2c-scl-rising-time-ns = <300>;
 264
 265         digitizer: digitizer@9 {
 266                 compatible = "hid-over-i2c";
 267                 reg = <0x9>;
 268                 interrupt-parent = <&gpio1>;
 269                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 270                 hid-descr-addr = <0x1>;
 271                 pinctrl-names = "default";
 272                 pinctrl-0 = <&pen_int_odl &pen_reset_l>;
 273         };
 274 };
 275
 276 &ap_i2c_ts {
 277         touchscreen: touchscreen@10 {
 278                 compatible = "elan,ekth3500";
 279                 reg = <0x10>;
 280                 interrupt-parent = <&gpio1>;
 281                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 282                 pinctrl-names = "default";
 283                 pinctrl-0 = <&touch_int_l &touch_reset_l>;
 284                 reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 285         };
 286 };
 287
 288 camera: &i2c7 {
 289         status = "okay";
 290
 291         clock-frequency = <400000>;
 292
 293         /* These are relatively safe rise/fall times; TODO: measure */
 294         i2c-scl-falling-time-ns = <50>;
 295         i2c-scl-rising-time-ns = <300>;
 296
 297         /* 24M mclk is shared between world and user cameras */
 298         pinctrl-0 = <&i2c7_xfer &test_clkout1>;
 299
 300         /* Rear-facing camera */
 301         wcam: camera@36 {
 302                 compatible = "ovti,ov5695";
 303                 reg = <0x36>;
 304                 pinctrl-names = "default";
 305                 pinctrl-0 = <&wcam_rst>;
 306
 307                 clocks = <&cru SCLK_TESTCLKOUT1>;
 308                 clock-names = "xvclk";
 309
 310                 avdd-supply = <&pp2800_cam>;
 311                 dvdd-supply = <&pp1250_cam>;
 312                 dovdd-supply = <&pp1800_s0>;
 313                 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 314
 315                 port {
 316                         wcam_out: endpoint {
 317                                 remote-endpoint = <&mipi_in_wcam>;
 318                                 data-lanes = <1 2>;
 319                         };
 320                 };
 321         };
 322
 323         /* Front-facing camera */
 324         ucam: camera@3c {
 325                 compatible = "ovti,ov2685";
 326                 reg = <0x3c>;
 327                 pinctrl-names = "default";
 328                 pinctrl-0 = <&ucam_rst>;
 329
 330                 clocks = <&cru SCLK_TESTCLKOUT1>;
 331                 clock-names = "xvclk";
 332
 333                 avdd-supply = <&pp2800_cam>;
 334                 dovdd-supply = <&pp1800_s0>;
 335                 dvdd-supply = <&pp1800_s0>;
 336                 reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 337
 338                 port {
 339                         ucam_out: endpoint {
 340                                 remote-endpoint = <&mipi_in_ucam>;
 341                                 data-lanes = <1>;
 342                         };
 343                 };
 344         };
 345 };
 346
 347 &cdn_dp {
 348         extcon = <&usbc_extcon0>;
 349         phys = <&tcphy0_dp>;
 350 };
 351
 352 &cpu_alert0 {
 353         temperature = <66000>;
 354 };
 355
 356 &cpu_alert1 {
 357         temperature = <71000>;
 358 };
 359
 360 &cros_ec {
 361         interrupt-parent = <&gpio1>;
 362         interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 363 };
 364
 365 &cru {
 366         assigned-clocks =
 367                 <&cru PLL_GPLL>, <&cru PLL_CPLL>,
 368                 <&cru PLL_NPLL>,
 369                 <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
 370                 <&cru PCLK_PERIHP>,
 371                 <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
 372                 <&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
 373                 <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
 374                 <&cru ACLK_VIO>,
 375                 <&cru ACLK_GIC_PRE>,
 376                 <&cru PCLK_DDR>,
 377                 <&cru ACLK_HDCP>;
 378         assigned-clock-rates =
 379                 <600000000>, <1600000000>,
 380                 <1000000000>,
 381                 <150000000>, <75000000>,
 382                 <37500000>,
 383                 <100000000>, <100000000>,
 384                 <50000000>, <800000000>,
 385                 <100000000>, <50000000>,
 386                 <400000000>,
 387                 <200000000>,
 388                 <200000000>,
 389                 <400000000>;
 390 };
 391
 392 &i2c_tunnel {
 393         google,remote-bus = <0>;
 394 };
 395
 396 &io_domains {
 397         bt656-supply = <&pp1800_s0>;            /* APIO2_VDD;  2a 2b */
 398         audio-supply = <&pp1800_s0>;            /* APIO5_VDD;  3d 4a */
 399         gpio1830-supply = <&pp1800_s0>;         /* APIO4_VDD;  4c 4d */
 400 };
 401
 402 &isp0 {
 403         status = "okay";
 404
 405         ports {
 406                 port@0 {
 407                         mipi_in_wcam: endpoint@0 {
 408                                 reg = <0>;
 409                                 remote-endpoint = <&wcam_out>;
 410                                 data-lanes = <1 2>;
 411                         };
 412
 413                         mipi_in_ucam: endpoint@1 {
 414                                 reg = <1>;
 415                                 remote-endpoint = <&ucam_out>;
 416                                 data-lanes = <1>;
 417                         };
 418                 };
 419         };
 420 };
 421
 422 &isp0_mmu {
 423         status = "okay";
 424 };
 425
 426 &max98357a {
 427         sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
 428 };
 429
 430 &mipi_dphy_rx0 {
 431         status = "okay";
 432 };
 433
 434 &mipi_dsi {
 435         status = "okay";
 436         clock-master;
 437
 438         ports {
 439                 mipi_out: port@1 {
 440                         reg = <1>;
 441
 442                         mipi_out_panel: endpoint {
 443                                 remote-endpoint = <&mipi_in_panel>;
 444                         };
 445                 };
 446         };
 447
 448         mipi_panel: panel@0 {
 449                 /* 2 different panels are used, compatibles are in dts files */
 450                 reg = <0>;
 451                 backlight = <&backlight>;
 452                 enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
 453                 pinctrl-names = "default";
 454                 pinctrl-0 = <&display_rst_l>;
 455
 456                 ports {
 457                         #address-cells = <1>;
 458                         #size-cells = <0>;
 459
 460                         port@0 {
 461                                 reg = <0>;
 462
 463                                 mipi_in_panel: endpoint {
 464                                         remote-endpoint = <&mipi_out_panel>;
 465                                 };
 466                         };
 467
 468                         port@1 {
 469                                 reg = <1>;
 470
 471                                 mipi1_in_panel: endpoint@1 {
 472                                         remote-endpoint = <&mipi1_out_panel>;
 473                                 };
 474                         };
 475                 };
 476         };
 477 };
 478
 479 &mipi_dsi1 {
 480         status = "okay";
 481
 482         ports {
 483                 mipi1_out: port@1 {
 484                         reg = <1>;
 485
 486                         mipi1_out_panel: endpoint {
 487                                 remote-endpoint = <&mipi1_in_panel>;
 488                         };
 489                 };
 490         };
 491 };
 492
 493 &pcie0 {
 494         ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
 495
 496         /* PERST# asserted in S3 */
 497         pcie-reset-suspend = <1>;
 498
 499         vpcie3v3-supply = <&wlan_3v3>;
 500         vpcie1v8-supply = <&pp1800_pcie>;
 501 };
 502
 503 &sdmmc {
 504         cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 505 };
 506
 507 &sound {
 508         rockchip,codec = <&max98357a &dmic &codec &cdn_dp>;
 509 };
 510
 511 &spi2 {
 512         status = "okay";
 513
 514         cr50@0 {
 515                 compatible = "google,cr50";
 516                 reg = <0>;
 517                 interrupt-parent = <&gpio1>;
 518                 interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 519                 pinctrl-names = "default";
 520                 pinctrl-0 = <&h1_int_od_l>;
 521                 spi-max-frequency = <800000>;
 522         };
 523 };
 524
 525 &usb_host0_ohci {
 526         #address-cells = <1>;
 527         #size-cells = <0>;
 528
 529         qca_bt: bluetooth@1 {
 530                 compatible = "usbcf3,e300", "usb4ca,301a";
 531                 reg = <1>;
 532                 pinctrl-names = "default";
 533                 pinctrl-0 = <&bt_host_wake_l>;
 534                 interrupt-parent = <&gpio1>;
 535                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 536                 interrupt-names = "wakeup";
 537         };
 538 };
 539
 540 /* PINCTRL OVERRIDES */
 541 &ec_ap_int_l {
 542         rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
 543 };
 544
 545 &ap_fw_wp {
 546         rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 547 };
 548
 549 &bl_en {
 550         rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 551 };
 552
 553 &bt_host_wake_l {
 554         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 555 };
 556
 557 &ec_ap_int_l {
 558         rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
 559 };
 560
 561 &headset_int_l {
 562         rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
 563 };
 564
 565 &i2s0_8ch_bus {
 566         rockchip,pins =
 567                 <3 RK_PD0 1 &pcfg_pull_none_6ma>,
 568                 <3 RK_PD1 1 &pcfg_pull_none_6ma>,
 569                 <3 RK_PD2 1 &pcfg_pull_none_6ma>,
 570                 <3 RK_PD3 1 &pcfg_pull_none_6ma>,
 571                 <3 RK_PD7 1 &pcfg_pull_none_6ma>,
 572                 <4 RK_PA0 1 &pcfg_pull_none_6ma>;
 573 };
 574
 575 /* there is no external pull up, so need to set this pin pull up */
 576 &sdmmc_cd_pin {
 577         rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
 578 };
 579
 580 &sd_pwr_1800_sel {
 581         rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
 582 };
 583
 584 &sdmode_en {
 585         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
 586 };
 587
 588 &touch_reset_l {
 589         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
 590 };
 591
 592 &touch_int_l {
 593         rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
 594 };
 595
 596 &pinctrl {
 597         pinctrl-0 = <
 598                 &ap_pwroff      /* AP will auto-assert this when in S3 */
 599                 &clk_32k        /* This pin is always 32k on gru boards */
 600                 &wlan_rf_kill_1v8_l
 601         >;
 602
 603         pcfg_pull_none_6ma: pcfg-pull-none-6ma {
 604                 bias-disable;
 605                 drive-strength = <6>;
 606         };
 607
 608         camera {
 609                 pp1250_cam_en: pp1250-dvdd {
 610                         rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 611                 };
 612
 613                 pp2800_cam_en: pp2800-avdd {
 614                         rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 615                 };
 616
 617                 ucam_rst: ucam_rst {
 618                         rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 619                 };
 620
 621                 wcam_rst: wcam_rst {
 622                         rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 623                 };
 624         };
 625
 626         digitizer {
 627                 pen_int_odl: pen-int-odl {
 628                         rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
 629                 };
 630
 631                 pen_reset_l: pen-reset-l {
 632                         rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
 633                 };
 634         };
 635
 636         discrete-regulators {
 637                 display_rst_l: display-rst-l {
 638                         rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
 639                 };
 640
 641                 ppvarp_lcd_en: ppvarp-lcd-en {
 642                         rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 643                 };
 644
 645                 ppvarn_lcd_en: ppvarn-lcd-en {
 646                         rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 647                 };
 648         };
 649
 650         dmic {
 651                 dmic_en: dmic-en {
 652                         rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 653                 };
 654         };
 655
 656         pen {
 657                 pen_eject_odl: pen-eject-odl {
 658                         rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 659                 };
 660         };
 661
 662         tpm {
 663                 h1_int_od_l: h1-int-od-l {
 664                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
 665                 };
 666         };
 667 };
 668
 669 &wifi {
 670         bt_en_1v8_l: bt-en-1v8-l {
 671                 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 672         };
 673
 674         wlan_pd_1v8_l: wlan-pd-1v8-l {
 675                 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 676         };
 677
 678         /* Default pull-up, but just to be clear */
 679         wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l {
 680                 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 681         };
 682
 683         wifi_perst_l: wifi-perst-l {
 684                 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 685         };
 686
 687         wlan_host_wake_l: wlan-host-wake-l {
 688                 rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 689         };
 690 };