WIP FPC-III support

[linux/fpc-iii.git] / arch / arm64 / kernel / hw_breakpoint.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
 * using the CPU's debug registers.
 *
 * Copyright (C) 2012 ARM Limited
 * Author: Will Deacon <will.deacon@arm.com>
 */

#define pr_fmt(fmt) "hw-breakpoint: " fmt

#include <linux/compat.h>
#include <linux/cpu_pm.h>
#include <linux/errno.h>
#include <linux/hw_breakpoint.h>
#include <linux/kprobes.h>
#include <linux/perf_event.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
#include <linux/uaccess.h>

#include <asm/current.h>
#include <asm/debug-monitors.h>
#include <asm/hw_breakpoint.h>
#include <asm/traps.h>
#include <asm/cputype.h>
#include <asm/system_misc.h>

/* Breakpoint currently in use for each BRP. */
static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);

/* Watchpoint currently in use for each WRP. */
static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);

/* Currently stepping a per-CPU kernel breakpoint. */
static DEFINE_PER_CPU(int, stepping_kernel_bp);

/* Number of BRP/WRP registers on this CPU. */
static int core_num_brps;
static int core_num_wrps;

int hw_breakpoint_slots(int type)
{
        /*
         * We can be called early, so don't rely on
         * our static variables being initialised.
         */
        switch (type) {
        case TYPE_INST:
                return get_num_brps();
        case TYPE_DATA:
                return get_num_wrps();
        default:
                pr_warn("unknown slot type: %d\n", type);
                return 0;
        }
}

#define READ_WB_REG_CASE(OFF, N, REG, VAL)      \
        case (OFF + N):                         \
                AARCH64_DBG_READ(N, REG, VAL);  \
                break

#define WRITE_WB_REG_CASE(OFF, N, REG, VAL)     \
        case (OFF + N):                         \
                AARCH64_DBG_WRITE(N, REG, VAL); \
                break

#define GEN_READ_WB_REG_CASES(OFF, REG, VAL)    \
        READ_WB_REG_CASE(OFF,  0, REG, VAL);    \
        READ_WB_REG_CASE(OFF,  1, REG, VAL);    \
        READ_WB_REG_CASE(OFF,  2, REG, VAL);    \
        READ_WB_REG_CASE(OFF,  3, REG, VAL);    \
        READ_WB_REG_CASE(OFF,  4, REG, VAL);    \
        READ_WB_REG_CASE(OFF,  5, REG, VAL);    \
        READ_WB_REG_CASE(OFF,  6, REG, VAL);    \
        READ_WB_REG_CASE(OFF,  7, REG, VAL);    \
        READ_WB_REG_CASE(OFF,  8, REG, VAL);    \
        READ_WB_REG_CASE(OFF,  9, REG, VAL);    \
        READ_WB_REG_CASE(OFF, 10, REG, VAL);    \
        READ_WB_REG_CASE(OFF, 11, REG, VAL);    \
        READ_WB_REG_CASE(OFF, 12, REG, VAL);    \
        READ_WB_REG_CASE(OFF, 13, REG, VAL);    \
        READ_WB_REG_CASE(OFF, 14, REG, VAL);    \
        READ_WB_REG_CASE(OFF, 15, REG, VAL)

#define GEN_WRITE_WB_REG_CASES(OFF, REG, VAL)   \
        WRITE_WB_REG_CASE(OFF,  0, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF,  1, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF,  2, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF,  3, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF,  4, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF,  5, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF,  6, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF,  7, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF,  8, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF,  9, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF, 10, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF, 11, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF, 12, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF, 13, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF, 14, REG, VAL);   \
        WRITE_WB_REG_CASE(OFF, 15, REG, VAL)

static u64 read_wb_reg(int reg, int n)
{
        u64 val = 0;

        switch (reg + n) {
        GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_BVR, AARCH64_DBG_REG_NAME_BVR, val);
        GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_BCR, AARCH64_DBG_REG_NAME_BCR, val);
        GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val);
        GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val);
        default:
                pr_warn("attempt to read from unknown breakpoint register %d\n", n);
        }

        return val;
}
NOKPROBE_SYMBOL(read_wb_reg);

static void write_wb_reg(int reg, int n, u64 val)
{
        switch (reg + n) {
        GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_BVR, AARCH64_DBG_REG_NAME_BVR, val);
        GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_BCR, AARCH64_DBG_REG_NAME_BCR, val);
        GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val);
        GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val);
        default:
                pr_warn("attempt to write to unknown breakpoint register %d\n", n);
        }
        isb();
}
NOKPROBE_SYMBOL(write_wb_reg);

/*
 * Convert a breakpoint privilege level to the corresponding exception
 * level.
 */
static enum dbg_active_el debug_exception_level(int privilege)
{
        switch (privilege) {
        case AARCH64_BREAKPOINT_EL0:
                return DBG_ACTIVE_EL0;
        case AARCH64_BREAKPOINT_EL1:
                return DBG_ACTIVE_EL1;
        default:
                pr_warn("invalid breakpoint privilege level %d\n", privilege);
                return -EINVAL;
        }
}
NOKPROBE_SYMBOL(debug_exception_level);

enum hw_breakpoint_ops {
        HW_BREAKPOINT_INSTALL,
        HW_BREAKPOINT_UNINSTALL,
        HW_BREAKPOINT_RESTORE
};

static int is_compat_bp(struct perf_event *bp)
{
        struct task_struct *tsk = bp->hw.target;

        /*
         * tsk can be NULL for per-cpu (non-ptrace) breakpoints.
         * In this case, use the native interface, since we don't have
         * the notion of a "compat CPU" and could end up relying on
         * deprecated behaviour if we use unaligned watchpoints in
         * AArch64 state.
         */
        return tsk && is_compat_thread(task_thread_info(tsk));
}

/**
 * hw_breakpoint_slot_setup - Find and setup a perf slot according to
 *                            operations
 *
 * @slots: pointer to array of slots
 * @max_slots: max number of slots
 * @bp: perf_event to setup
 * @ops: operation to be carried out on the slot
 *
 * Return:
 *      slot index on success
 *      -ENOSPC if no slot is available/matches
 *      -EINVAL on wrong operations parameter
 */
static int hw_breakpoint_slot_setup(struct perf_event **slots, int max_slots,
                                    struct perf_event *bp,
                                    enum hw_breakpoint_ops ops)
{
        int i;
        struct perf_event **slot;

        for (i = 0; i < max_slots; ++i) {
                slot = &slots[i];
                switch (ops) {
                case HW_BREAKPOINT_INSTALL:
                        if (!*slot) {
                                *slot = bp;
                                return i;
                        }
                        break;
                case HW_BREAKPOINT_UNINSTALL:
                        if (*slot == bp) {
                                *slot = NULL;
                                return i;
                        }
                        break;
                case HW_BREAKPOINT_RESTORE:
                        if (*slot == bp)
                                return i;
                        break;
                default:
                        pr_warn_once("Unhandled hw breakpoint ops %d\n", ops);
                        return -EINVAL;
                }
        }
        return -ENOSPC;
}

static int hw_breakpoint_control(struct perf_event *bp,
                                 enum hw_breakpoint_ops ops)
{
        struct arch_hw_breakpoint *info = counter_arch_bp(bp);
        struct perf_event **slots;
        struct debug_info *debug_info = &current->thread.debug;
        int i, max_slots, ctrl_reg, val_reg, reg_enable;
        enum dbg_active_el dbg_el = debug_exception_level(info->ctrl.privilege);
        u32 ctrl;

        if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
                /* Breakpoint */
                ctrl_reg = AARCH64_DBG_REG_BCR;
                val_reg = AARCH64_DBG_REG_BVR;
                slots = this_cpu_ptr(bp_on_reg);
                max_slots = core_num_brps;
                reg_enable = !debug_info->bps_disabled;
        } else {
                /* Watchpoint */
                ctrl_reg = AARCH64_DBG_REG_WCR;
                val_reg = AARCH64_DBG_REG_WVR;
                slots = this_cpu_ptr(wp_on_reg);
                max_slots = core_num_wrps;
                reg_enable = !debug_info->wps_disabled;
        }

        i = hw_breakpoint_slot_setup(slots, max_slots, bp, ops);

        if (WARN_ONCE(i < 0, "Can't find any breakpoint slot"))
                return i;

        switch (ops) {
        case HW_BREAKPOINT_INSTALL:
                /*
                 * Ensure debug monitors are enabled at the correct exception
                 * level.
                 */
                enable_debug_monitors(dbg_el);
                fallthrough;
        case HW_BREAKPOINT_RESTORE:
                /* Setup the address register. */
                write_wb_reg(val_reg, i, info->address);

                /* Setup the control register. */
                ctrl = encode_ctrl_reg(info->ctrl);
                write_wb_reg(ctrl_reg, i,
                             reg_enable ? ctrl | 0x1 : ctrl & ~0x1);
                break;
        case HW_BREAKPOINT_UNINSTALL:
                /* Reset the control register. */
                write_wb_reg(ctrl_reg, i, 0);

                /*
                 * Release the debug monitors for the correct exception
                 * level.
                 */
                disable_debug_monitors(dbg_el);
                break;
        }

        return 0;
}

/*
 * Install a perf counter breakpoint.
 */
int arch_install_hw_breakpoint(struct perf_event *bp)
{
        return hw_breakpoint_control(bp, HW_BREAKPOINT_INSTALL);
}

void arch_uninstall_hw_breakpoint(struct perf_event *bp)
{
        hw_breakpoint_control(bp, HW_BREAKPOINT_UNINSTALL);
}

static int get_hbp_len(u8 hbp_len)
{
        unsigned int len_in_bytes = 0;

        switch (hbp_len) {
        case ARM_BREAKPOINT_LEN_1:
                len_in_bytes = 1;
                break;
        case ARM_BREAKPOINT_LEN_2:
                len_in_bytes = 2;
                break;
        case ARM_BREAKPOINT_LEN_3:
                len_in_bytes = 3;
                break;
        case ARM_BREAKPOINT_LEN_4:
                len_in_bytes = 4;
                break;
        case ARM_BREAKPOINT_LEN_5:
                len_in_bytes = 5;
                break;
        case ARM_BREAKPOINT_LEN_6:
                len_in_bytes = 6;
                break;
        case ARM_BREAKPOINT_LEN_7:
                len_in_bytes = 7;
                break;
        case ARM_BREAKPOINT_LEN_8:
                len_in_bytes = 8;
                break;
        }

        return len_in_bytes;
}

/*
 * Check whether bp virtual address is in kernel space.
 */
int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw)
{
        unsigned int len;
        unsigned long va;

        va = hw->address;
        len = get_hbp_len(hw->ctrl.len);

        return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
}

/*
 * Extract generic type and length encodings from an arch_hw_breakpoint_ctrl.
 * Hopefully this will disappear when ptrace can bypass the conversion
 * to generic breakpoint descriptions.
 */
int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
                           int *gen_len, int *gen_type, int *offset)
{
        /* Type */
        switch (ctrl.type) {
        case ARM_BREAKPOINT_EXECUTE:
                *gen_type = HW_BREAKPOINT_X;
                break;
        case ARM_BREAKPOINT_LOAD:
                *gen_type = HW_BREAKPOINT_R;
                break;
        case ARM_BREAKPOINT_STORE:
                *gen_type = HW_BREAKPOINT_W;
                break;
        case ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE:
                *gen_type = HW_BREAKPOINT_RW;
                break;
        default:
                return -EINVAL;
        }

        if (!ctrl.len)
                return -EINVAL;
        *offset = __ffs(ctrl.len);

        /* Len */
        switch (ctrl.len >> *offset) {
        case ARM_BREAKPOINT_LEN_1:
                *gen_len = HW_BREAKPOINT_LEN_1;
                break;
        case ARM_BREAKPOINT_LEN_2:
                *gen_len = HW_BREAKPOINT_LEN_2;
                break;
        case ARM_BREAKPOINT_LEN_3:
                *gen_len = HW_BREAKPOINT_LEN_3;
                break;
        case ARM_BREAKPOINT_LEN_4:
                *gen_len = HW_BREAKPOINT_LEN_4;
                break;
        case ARM_BREAKPOINT_LEN_5:
                *gen_len = HW_BREAKPOINT_LEN_5;
                break;
        case ARM_BREAKPOINT_LEN_6:
                *gen_len = HW_BREAKPOINT_LEN_6;
                break;
        case ARM_BREAKPOINT_LEN_7:
                *gen_len = HW_BREAKPOINT_LEN_7;
                break;
        case ARM_BREAKPOINT_LEN_8:
                *gen_len = HW_BREAKPOINT_LEN_8;
                break;
        default:
                return -EINVAL;
        }

        return 0;
}

/*
 * Construct an arch_hw_breakpoint from a perf_event.
 */
static int arch_build_bp_info(struct perf_event *bp,
                              const struct perf_event_attr *attr,
                              struct arch_hw_breakpoint *hw)
{
        /* Type */
        switch (attr->bp_type) {
        case HW_BREAKPOINT_X:
                hw->ctrl.type = ARM_BREAKPOINT_EXECUTE;
                break;
        case HW_BREAKPOINT_R:
                hw->ctrl.type = ARM_BREAKPOINT_LOAD;
                break;
        case HW_BREAKPOINT_W:
                hw->ctrl.type = ARM_BREAKPOINT_STORE;
                break;
        case HW_BREAKPOINT_RW:
                hw->ctrl.type = ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE;
                break;
        default:
                return -EINVAL;
        }

        /* Len */
        switch (attr->bp_len) {
        case HW_BREAKPOINT_LEN_1:
                hw->ctrl.len = ARM_BREAKPOINT_LEN_1;
                break;
        case HW_BREAKPOINT_LEN_2:
                hw->ctrl.len = ARM_BREAKPOINT_LEN_2;
                break;
        case HW_BREAKPOINT_LEN_3:
                hw->ctrl.len = ARM_BREAKPOINT_LEN_3;
                break;
        case HW_BREAKPOINT_LEN_4:
                hw->ctrl.len = ARM_BREAKPOINT_LEN_4;
                break;
        case HW_BREAKPOINT_LEN_5:
                hw->ctrl.len = ARM_BREAKPOINT_LEN_5;
                break;
        case HW_BREAKPOINT_LEN_6:
                hw->ctrl.len = ARM_BREAKPOINT_LEN_6;
                break;
        case HW_BREAKPOINT_LEN_7:
                hw->ctrl.len = ARM_BREAKPOINT_LEN_7;
                break;
        case HW_BREAKPOINT_LEN_8:
                hw->ctrl.len = ARM_BREAKPOINT_LEN_8;
                break;
        default:
                return -EINVAL;
        }

        /*
         * On AArch64, we only permit breakpoints of length 4, whereas
         * AArch32 also requires breakpoints of length 2 for Thumb.
         * Watchpoints can be of length 1, 2, 4 or 8 bytes.
         */
        if (hw->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
                if (is_compat_bp(bp)) {
                        if (hw->ctrl.len != ARM_BREAKPOINT_LEN_2 &&
                            hw->ctrl.len != ARM_BREAKPOINT_LEN_4)
                                return -EINVAL;
                } else if (hw->ctrl.len != ARM_BREAKPOINT_LEN_4) {
                        /*
                         * FIXME: Some tools (I'm looking at you perf) assume
                         *        that breakpoints should be sizeof(long). This
                         *        is nonsense. For now, we fix up the parameter
                         *        but we should probably return -EINVAL instead.
                         */
                        hw->ctrl.len = ARM_BREAKPOINT_LEN_4;
                }
        }

        /* Address */
        hw->address = attr->bp_addr;

        /*
         * Privilege
         * Note that we disallow combined EL0/EL1 breakpoints because
         * that would complicate the stepping code.
         */
        if (arch_check_bp_in_kernelspace(hw))
                hw->ctrl.privilege = AARCH64_BREAKPOINT_EL1;
        else
                hw->ctrl.privilege = AARCH64_BREAKPOINT_EL0;

        /* Enabled? */
        hw->ctrl.enabled = !attr->disabled;

        return 0;
}

/*
 * Validate the arch-specific HW Breakpoint register settings.
 */
int hw_breakpoint_arch_parse(struct perf_event *bp,
                             const struct perf_event_attr *attr,
                             struct arch_hw_breakpoint *hw)
{
        int ret;
        u64 alignment_mask, offset;

        /* Build the arch_hw_breakpoint. */
        ret = arch_build_bp_info(bp, attr, hw);
        if (ret)
                return ret;

        /*
         * Check address alignment.
         * We don't do any clever alignment correction for watchpoints
         * because using 64-bit unaligned addresses is deprecated for
         * AArch64.
         *
         * AArch32 tasks expect some simple alignment fixups, so emulate
         * that here.
         */
        if (is_compat_bp(bp)) {
                if (hw->ctrl.len == ARM_BREAKPOINT_LEN_8)
                        alignment_mask = 0x7;
                else
                        alignment_mask = 0x3;
                offset = hw->address & alignment_mask;
                switch (offset) {
                case 0:
                        /* Aligned */
                        break;
                case 1:
                case 2:
                        /* Allow halfword watchpoints and breakpoints. */
                        if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
                                break;

                        fallthrough;
                case 3:
                        /* Allow single byte watchpoint. */
                        if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
                                break;

                        fallthrough;
                default:
                        return -EINVAL;
                }
        } else {
                if (hw->ctrl.type == ARM_BREAKPOINT_EXECUTE)
                        alignment_mask = 0x3;
                else
                        alignment_mask = 0x7;
                offset = hw->address & alignment_mask;
        }

        hw->address &= ~alignment_mask;
        hw->ctrl.len <<= offset;

        /*
         * Disallow per-task kernel breakpoints since these would
         * complicate the stepping code.
         */
        if (hw->ctrl.privilege == AARCH64_BREAKPOINT_EL1 && bp->hw.target)
                return -EINVAL;

        return 0;
}

/*
 * Enable/disable all of the breakpoints active at the specified
 * exception level at the register level.
 * This is used when single-stepping after a breakpoint exception.
 */
static void toggle_bp_registers(int reg, enum dbg_active_el el, int enable)
{
        int i, max_slots, privilege;
        u32 ctrl;
        struct perf_event **slots;

        switch (reg) {
        case AARCH64_DBG_REG_BCR:
                slots = this_cpu_ptr(bp_on_reg);
                max_slots = core_num_brps;
                break;
        case AARCH64_DBG_REG_WCR:
                slots = this_cpu_ptr(wp_on_reg);
                max_slots = core_num_wrps;
                break;
        default:
                return;
        }

        for (i = 0; i < max_slots; ++i) {
                if (!slots[i])
                        continue;

                privilege = counter_arch_bp(slots[i])->ctrl.privilege;
                if (debug_exception_level(privilege) != el)
                        continue;

                ctrl = read_wb_reg(reg, i);
                if (enable)
                        ctrl |= 0x1;
                else
                        ctrl &= ~0x1;
                write_wb_reg(reg, i, ctrl);
        }
}
NOKPROBE_SYMBOL(toggle_bp_registers);

/*
 * Debug exception handlers.
 */
static int breakpoint_handler(unsigned long unused, unsigned int esr,
                              struct pt_regs *regs)
{
        int i, step = 0, *kernel_step;
        u32 ctrl_reg;
        u64 addr, val;
        struct perf_event *bp, **slots;
        struct debug_info *debug_info;
        struct arch_hw_breakpoint_ctrl ctrl;

        slots = this_cpu_ptr(bp_on_reg);
        addr = instruction_pointer(regs);
        debug_info = &current->thread.debug;

        for (i = 0; i < core_num_brps; ++i) {
                rcu_read_lock();

                bp = slots[i];

                if (bp == NULL)
                        goto unlock;

                /* Check if the breakpoint value matches. */
                val = read_wb_reg(AARCH64_DBG_REG_BVR, i);
                if (val != (addr & ~0x3))
                        goto unlock;

                /* Possible match, check the byte address select to confirm. */
                ctrl_reg = read_wb_reg(AARCH64_DBG_REG_BCR, i);
                decode_ctrl_reg(ctrl_reg, &ctrl);
                if (!((1 << (addr & 0x3)) & ctrl.len))
                        goto unlock;

                counter_arch_bp(bp)->trigger = addr;
                perf_bp_event(bp, regs);

                /* Do we need to handle the stepping? */
                if (is_default_overflow_handler(bp))
                        step = 1;
unlock:
                rcu_read_unlock();
        }

        if (!step)
                return 0;

        if (user_mode(regs)) {
                debug_info->bps_disabled = 1;
                toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL0, 0);

                /* If we're already stepping a watchpoint, just return. */
                if (debug_info->wps_disabled)
                        return 0;

                if (test_thread_flag(TIF_SINGLESTEP))
                        debug_info->suspended_step = 1;
                else
                        user_enable_single_step(current);
        } else {
                toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL1, 0);
                kernel_step = this_cpu_ptr(&stepping_kernel_bp);

                if (*kernel_step != ARM_KERNEL_STEP_NONE)
                        return 0;

                if (kernel_active_single_step()) {
                        *kernel_step = ARM_KERNEL_STEP_SUSPEND;
                } else {
                        *kernel_step = ARM_KERNEL_STEP_ACTIVE;
                        kernel_enable_single_step(regs);
                }
        }

        return 0;
}
NOKPROBE_SYMBOL(breakpoint_handler);

/*
 * Arm64 hardware does not always report a watchpoint hit address that matches
 * one of the watchpoints set. It can also report an address "near" the
 * watchpoint if a single instruction access both watched and unwatched
 * addresses. There is no straight-forward way, short of disassembling the
 * offending instruction, to map that address back to the watchpoint. This
 * function computes the distance of the memory access from the watchpoint as a
 * heuristic for the likelyhood that a given access triggered the watchpoint.
 *
 * See Section D2.10.5 "Determining the memory location that caused a Watchpoint
 * exception" of ARMv8 Architecture Reference Manual for details.
 *
 * The function returns the distance of the address from the bytes watched by
 * the watchpoint. In case of an exact match, it returns 0.
 */
static u64 get_distance_from_watchpoint(unsigned long addr, u64 val,
                                        struct arch_hw_breakpoint_ctrl *ctrl)
{
        u64 wp_low, wp_high;
        u32 lens, lene;

        addr = untagged_addr(addr);

        lens = __ffs(ctrl->len);
        lene = __fls(ctrl->len);

        wp_low = val + lens;
        wp_high = val + lene;
        if (addr < wp_low)
                return wp_low - addr;
        else if (addr > wp_high)
                return addr - wp_high;
        else
                return 0;
}

static int watchpoint_report(struct perf_event *wp, unsigned long addr,
                             struct pt_regs *regs)
{
        int step = is_default_overflow_handler(wp);
        struct arch_hw_breakpoint *info = counter_arch_bp(wp);

        info->trigger = addr;

        /*
         * If we triggered a user watchpoint from a uaccess routine, then
         * handle the stepping ourselves since userspace really can't help
         * us with this.
         */
        if (!user_mode(regs) && info->ctrl.privilege == AARCH64_BREAKPOINT_EL0)
                step = 1;
        else
                perf_bp_event(wp, regs);

        return step;
}

static int watchpoint_handler(unsigned long addr, unsigned int esr,
                              struct pt_regs *regs)
{
        int i, step = 0, *kernel_step, access, closest_match = 0;
        u64 min_dist = -1, dist;
        u32 ctrl_reg;
        u64 val;
        struct perf_event *wp, **slots;
        struct debug_info *debug_info;
        struct arch_hw_breakpoint_ctrl ctrl;

        slots = this_cpu_ptr(wp_on_reg);
        debug_info = &current->thread.debug;

        /*
         * Find all watchpoints that match the reported address. If no exact
         * match is found. Attribute the hit to the closest watchpoint.
         */
        rcu_read_lock();
        for (i = 0; i < core_num_wrps; ++i) {
                wp = slots[i];
                if (wp == NULL)
                        continue;

                /*
                 * Check that the access type matches.
                 * 0 => load, otherwise => store
                 */
                access = (esr & AARCH64_ESR_ACCESS_MASK) ? HW_BREAKPOINT_W :
                         HW_BREAKPOINT_R;
                if (!(access & hw_breakpoint_type(wp)))
                        continue;

                /* Check if the watchpoint value and byte select match. */
                val = read_wb_reg(AARCH64_DBG_REG_WVR, i);
                ctrl_reg = read_wb_reg(AARCH64_DBG_REG_WCR, i);
                decode_ctrl_reg(ctrl_reg, &ctrl);
                dist = get_distance_from_watchpoint(addr, val, &ctrl);
                if (dist < min_dist) {
                        min_dist = dist;
                        closest_match = i;
                }
                /* Is this an exact match? */
                if (dist != 0)
                        continue;

                step = watchpoint_report(wp, addr, regs);
        }

        /* No exact match found? */
        if (min_dist > 0 && min_dist != -1)
                step = watchpoint_report(slots[closest_match], addr, regs);

        rcu_read_unlock();

        if (!step)
                return 0;

        /*
         * We always disable EL0 watchpoints because the kernel can
         * cause these to fire via an unprivileged access.
         */
        toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 0);

        if (user_mode(regs)) {
                debug_info->wps_disabled = 1;

                /* If we're already stepping a breakpoint, just return. */
                if (debug_info->bps_disabled)
                        return 0;

                if (test_thread_flag(TIF_SINGLESTEP))
                        debug_info->suspended_step = 1;
                else
                        user_enable_single_step(current);
        } else {
                toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL1, 0);
                kernel_step = this_cpu_ptr(&stepping_kernel_bp);

                if (*kernel_step != ARM_KERNEL_STEP_NONE)
                        return 0;

                if (kernel_active_single_step()) {
                        *kernel_step = ARM_KERNEL_STEP_SUSPEND;
                } else {
                        *kernel_step = ARM_KERNEL_STEP_ACTIVE;
                        kernel_enable_single_step(regs);
                }
        }

        return 0;
}
NOKPROBE_SYMBOL(watchpoint_handler);

/*
 * Handle single-step exception.
 */
int reinstall_suspended_bps(struct pt_regs *regs)
{
        struct debug_info *debug_info = &current->thread.debug;
        int handled_exception = 0, *kernel_step;

        kernel_step = this_cpu_ptr(&stepping_kernel_bp);

        /*
         * Called from single-step exception handler.
         * Return 0 if execution can resume, 1 if a SIGTRAP should be
         * reported.
         */
        if (user_mode(regs)) {
                if (debug_info->bps_disabled) {
                        debug_info->bps_disabled = 0;
                        toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL0, 1);
                        handled_exception = 1;
                }

                if (debug_info->wps_disabled) {
                        debug_info->wps_disabled = 0;
                        toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 1);
                        handled_exception = 1;
                }

                if (handled_exception) {
                        if (debug_info->suspended_step) {
                                debug_info->suspended_step = 0;
                                /* Allow exception handling to fall-through. */
                                handled_exception = 0;
                        } else {
                                user_disable_single_step(current);
                        }
                }
        } else if (*kernel_step != ARM_KERNEL_STEP_NONE) {
                toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL1, 1);
                toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL1, 1);

                if (!debug_info->wps_disabled)
                        toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 1);

                if (*kernel_step != ARM_KERNEL_STEP_SUSPEND) {
                        kernel_disable_single_step();
                        handled_exception = 1;
                } else {
                        handled_exception = 0;
                }

                *kernel_step = ARM_KERNEL_STEP_NONE;
        }

        return !handled_exception;
}
NOKPROBE_SYMBOL(reinstall_suspended_bps);

/*
 * Context-switcher for restoring suspended breakpoints.
 */
void hw_breakpoint_thread_switch(struct task_struct *next)
{
        /*
         *           current        next
         * disabled: 0              0     => The usual case, NOTIFY_DONE
         *           0              1     => Disable the registers
         *           1              0     => Enable the registers
         *           1              1     => NOTIFY_DONE. per-task bps will
         *                                   get taken care of by perf.
         */

        struct debug_info *current_debug_info, *next_debug_info;

        current_debug_info = &current->thread.debug;
        next_debug_info = &next->thread.debug;

        /* Update breakpoints. */
        if (current_debug_info->bps_disabled != next_debug_info->bps_disabled)
                toggle_bp_registers(AARCH64_DBG_REG_BCR,
                                    DBG_ACTIVE_EL0,
                                    !next_debug_info->bps_disabled);

        /* Update watchpoints. */
        if (current_debug_info->wps_disabled != next_debug_info->wps_disabled)
                toggle_bp_registers(AARCH64_DBG_REG_WCR,
                                    DBG_ACTIVE_EL0,
                                    !next_debug_info->wps_disabled);
}

/*
 * CPU initialisation.
 */
static int hw_breakpoint_reset(unsigned int cpu)
{
        int i;
        struct perf_event **slots;
        /*
         * When a CPU goes through cold-boot, it does not have any installed
         * slot, so it is safe to share the same function for restoring and
         * resetting breakpoints; when a CPU is hotplugged in, it goes
         * through the slots, which are all empty, hence it just resets control
         * and value for debug registers.
         * When this function is triggered on warm-boot through a CPU PM
         * notifier some slots might be initialized; if so they are
         * reprogrammed according to the debug slots content.
         */
        for (slots = this_cpu_ptr(bp_on_reg), i = 0; i < core_num_brps; ++i) {
                if (slots[i]) {
                        hw_breakpoint_control(slots[i], HW_BREAKPOINT_RESTORE);
                } else {
                        write_wb_reg(AARCH64_DBG_REG_BCR, i, 0UL);
                        write_wb_reg(AARCH64_DBG_REG_BVR, i, 0UL);
                }
        }

        for (slots = this_cpu_ptr(wp_on_reg), i = 0; i < core_num_wrps; ++i) {
                if (slots[i]) {
                        hw_breakpoint_control(slots[i], HW_BREAKPOINT_RESTORE);
                } else {
                        write_wb_reg(AARCH64_DBG_REG_WCR, i, 0UL);
                        write_wb_reg(AARCH64_DBG_REG_WVR, i, 0UL);
                }
        }

        return 0;
}

#ifdef CONFIG_CPU_PM
extern void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int));
#else
static inline void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int))
{
}
#endif

/*
 * One-time initialisation.
 */
static int __init arch_hw_breakpoint_init(void)
{
        int ret;

        core_num_brps = get_num_brps();
        core_num_wrps = get_num_wrps();

        pr_info("found %d breakpoint and %d watchpoint registers.\n",
                core_num_brps, core_num_wrps);

        /* Register debug fault handlers. */
        hook_debug_fault_code(DBG_ESR_EVT_HWBP, breakpoint_handler, SIGTRAP,
                              TRAP_HWBKPT, "hw-breakpoint handler");
        hook_debug_fault_code(DBG_ESR_EVT_HWWP, watchpoint_handler, SIGTRAP,
                              TRAP_HWBKPT, "hw-watchpoint handler");

        /*
         * Reset the breakpoint resources. We assume that a halting
         * debugger will leave the world in a nice state for us.
         */
        ret = cpuhp_setup_state(CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING,
                          "perf/arm64/hw_breakpoint:starting",
                          hw_breakpoint_reset, NULL);
        if (ret)
                pr_err("failed to register CPU hotplug notifier: %d\n", ret);

        /* Register cpu_suspend hw breakpoint restore hook */
        cpu_suspend_set_dbg_restorer(hw_breakpoint_reset);

        return ret;
}
arch_initcall(arch_hw_breakpoint_init);

void hw_breakpoint_pmu_read(struct perf_event *bp)
{
}

/*
 * Dummy function to register with die_notifier.
 */
int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
                                    unsigned long val, void *data)
{
        return NOTIFY_DONE;
}