| blob | aa1ae94cd776a7ed1ce4abde7258c20b00a6887b |
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Device Tree for Bluestone (APM821xx) board.
4 *
5 * Copyright (c) 2010, Applied Micro Circuits Corporation
6 * Author: Tirumala R Marri <tmarri@apm.com>
7 */
9 /dts-v1/;
11 / {
12 #address-cells = <2>;
13 #size-cells = <1>;
14 model = "apm,bluestone";
15 compatible = "apm,bluestone";
16 dcr-parent = <&{/cpus/cpu@0}>;
18 aliases {
19 ethernet0 = &EMAC0;
20 serial0 = &UART0;
21 serial1 = &UART1;
22 };
24 cpus {
25 #address-cells = <1>;
26 #size-cells = <0>;
28 cpu@0 {
29 device_type = "cpu";
30 model = "PowerPC,apm821xx";
31 reg = <0x00000000>;
32 clock-frequency = <0>; /* Filled in by U-Boot */
33 timebase-frequency = <0>; /* Filled in by U-Boot */
34 i-cache-line-size = <32>;
35 d-cache-line-size = <32>;
36 i-cache-size = <32768>;
37 d-cache-size = <32768>;
38 dcr-controller;
39 dcr-access-method = "native";
40 next-level-cache = <&L2C0>;
41 };
42 };
44 memory {
45 device_type = "memory";
46 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
47 };
49 UIC0: interrupt-controller0 {
50 compatible = "ibm,uic";
51 interrupt-controller;
52 cell-index = <0>;
53 dcr-reg = <0x0c0 0x009>;
54 #address-cells = <0>;
55 #size-cells = <0>;
56 #interrupt-cells = <2>;
57 };
59 UIC1: interrupt-controller1 {
60 compatible = "ibm,uic";
61 interrupt-controller;
62 cell-index = <1>;
63 dcr-reg = <0x0d0 0x009>;
64 #address-cells = <0>;
65 #size-cells = <0>;
66 #interrupt-cells = <2>;
67 interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
68 interrupt-parent = <&UIC0>;
69 };
71 UIC2: interrupt-controller2 {
72 compatible = "ibm,uic";
73 interrupt-controller;
74 cell-index = <2>;
75 dcr-reg = <0x0e0 0x009>;
76 #address-cells = <0>;
77 #size-cells = <0>;
78 #interrupt-cells = <2>;
79 interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
80 interrupt-parent = <&UIC0>;
81 };
83 UIC3: interrupt-controller3 {
84 compatible = "ibm,uic";
85 interrupt-controller;
86 cell-index = <3>;
87 dcr-reg = <0x0f0 0x009>;
88 #address-cells = <0>;
89 #size-cells = <0>;
90 #interrupt-cells = <2>;
91 interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
92 interrupt-parent = <&UIC0>;
93 };
95 OCM: ocm@400040000 {
96 compatible = "ibm,ocm";
97 status = "okay";
98 cell-index = <1>;
99 /* configured in U-Boot */
100 reg = <4 0x00040000 0x8000>; /* 32K */
101 };
103 SDR0: sdr {
104 compatible = "ibm,sdr-apm821xx";
105 dcr-reg = <0x00e 0x002>;
106 };
108 CPR0: cpr {
109 compatible = "ibm,cpr-apm821xx";
110 dcr-reg = <0x00c 0x002>;
111 };
113 L2C0: l2c {
114 compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
115 dcr-reg = <0x020 0x008
116 0x030 0x008>;
117 cache-line-size = <32>;
118 cache-size = <262144>;
119 interrupt-parent = <&UIC1>;
120 interrupts = <11 1>;
121 };
123 plb {
124 compatible = "ibm,plb4";
125 #address-cells = <2>;
126 #size-cells = <1>;
127 ranges;
128 clock-frequency = <0>; /* Filled in by U-Boot */
130 SDRAM0: sdram {
131 compatible = "ibm,sdram-apm821xx";
132 dcr-reg = <0x010 0x002>;
133 };
135 MAL0: mcmal {
136 compatible = "ibm,mcmal2";
137 descriptor-memory = "ocm";
138 dcr-reg = <0x180 0x062>;
139 num-tx-chans = <1>;
140 num-rx-chans = <1>;
141 #address-cells = <0>;
142 #size-cells = <0>;
143 interrupt-parent = <&UIC2>;
144 interrupts = < /*TXEOB*/ 0x6 0x4
145 /*RXEOB*/ 0x7 0x4
146 /*SERR*/ 0x3 0x4
147 /*TXDE*/ 0x4 0x4
148 /*RXDE*/ 0x5 0x4>;
149 };
151 POB0: opb {
152 compatible = "ibm,opb";
153 #address-cells = <1>;
154 #size-cells = <1>;
155 ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
156 clock-frequency = <0>; /* Filled in by U-Boot */
158 EBC0: ebc {
159 compatible = "ibm,ebc";
160 dcr-reg = <0x012 0x002>;
161 #address-cells = <2>;
162 #size-cells = <1>;
163 clock-frequency = <0>; /* Filled in by U-Boot */
164 /* ranges property is supplied by U-Boot */
165 ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
166 interrupts = <0x6 0x4>;
167 interrupt-parent = <&UIC1>;
169 nor_flash@0,0 {
170 compatible = "amd,s29gl512n", "cfi-flash";
171 bank-width = <2>;
172 reg = <0x00000000 0x00000000 0x00400000>;
173 #address-cells = <1>;
174 #size-cells = <1>;
175 partition@0 {
176 label = "kernel";
177 reg = <0x00000000 0x00180000>;
178 };
179 partition@180000 {
180 label = "env";
181 reg = <0x00180000 0x00020000>;
182 };
183 partition@1a0000 {
184 label = "u-boot";
185 reg = <0x001a0000 0x00060000>;
186 };
187 };
189 ndfc@1,0 {
190 compatible = "ibm,ndfc";
191 reg = <0x00000003 0x00000000 0x00002000>;
192 ccr = <0x00001000>;
193 bank-settings = <0x80002222>;
194 #address-cells = <1>;
195 #size-cells = <1>;
196 /* 2Gb Nand Flash */
197 nand {
198 #address-cells = <1>;
199 #size-cells = <1>;
201 partition@0 {
202 label = "firmware";
203 reg = <0x00000000 0x00C00000>;
204 };
205 partition@c00000 {
206 label = "environment";
207 reg = <0x00C00000 0x00B00000>;
208 };
209 partition@1700000 {
210 label = "kernel";
211 reg = <0x01700000 0x00E00000>;
212 };
213 partition@2500000 {
214 label = "root";
215 reg = <0x02500000 0x08200000>;
216 };
217 partition@a700000 {
218 label = "device-tree";
219 reg = <0x0A700000 0x00B00000>;
220 };
221 partition@b200000 {
222 label = "config";
223 reg = <0x0B200000 0x00D00000>;
224 };
225 partition@bf00000 {
226 label = "diag";
227 reg = <0x0BF00000 0x00C00000>;
228 };
229 partition@cb00000 {
230 label = "vendor";
231 reg = <0x0CB00000 0x3500000>;
232 };
233 };
234 };
235 };
237 UART0: serial@ef600300 {
238 device_type = "serial";
239 compatible = "ns16550";
240 reg = <0xef600300 0x00000008>;
241 virtual-reg = <0xef600300>;
242 clock-frequency = <0>; /* Filled in by U-Boot */
243 current-speed = <0>; /* Filled in by U-Boot */
244 interrupt-parent = <&UIC1>;
245 interrupts = <0x1 0x4>;
246 };
248 UART1: serial@ef600400 {
249 device_type = "serial";
250 compatible = "ns16550";
251 reg = <0xef600400 0x00000008>;
252 virtual-reg = <0xef600400>;
253 clock-frequency = <0>; /* Filled in by U-Boot */
254 current-speed = <0>; /* Filled in by U-Boot */
255 interrupt-parent = <&UIC0>;
256 interrupts = <0x1 0x4>;
257 };
259 IIC0: i2c@ef600700 {
260 compatible = "ibm,iic";
261 reg = <0xef600700 0x00000014>;
262 interrupt-parent = <&UIC0>;
263 interrupts = <0x2 0x4>;
264 #address-cells = <1>;
265 #size-cells = <0>;
266 rtc@68 {
267 compatible = "st,m41t80";
268 reg = <0x68>;
269 interrupt-parent = <&UIC0>;
270 interrupts = <0x9 0x8>;
271 };
272 sttm@4C {
273 compatible = "adm,adm1032";
274 reg = <0x4C>;
275 interrupt-parent = <&UIC1>;
276 interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
277 };
278 };
280 IIC1: i2c@ef600800 {
281 compatible = "ibm,iic";
282 reg = <0xef600800 0x00000014>;
283 interrupt-parent = <&UIC0>;
284 interrupts = <0x3 0x4>;
285 };
287 RGMII0: emac-rgmii@ef601500 {
288 compatible = "ibm,rgmii";
289 reg = <0xef601500 0x00000008>;
290 has-mdio;
291 };
293 TAH0: emac-tah@ef601350 {
294 compatible = "ibm,tah";
295 reg = <0xef601350 0x00000030>;
296 };
298 EMAC0: ethernet@ef600c00 {
299 device_type = "network";
300 compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
301 interrupt-parent = <&EMAC0>;
302 interrupts = <0x0 0x1>;
303 #interrupt-cells = <1>;
304 #address-cells = <0>;
305 #size-cells = <0>;
306 interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
307 /*Wake*/ 0x1 &UIC2 0x14 0x4>;
308 reg = <0xef600c00 0x000000c4>;
309 local-mac-address = [000000000000]; /* Filled in by U-Boot */
310 mal-device = <&MAL0>;
311 mal-tx-channel = <0>;
312 mal-rx-channel = <0>;
313 cell-index = <0>;
314 max-frame-size = <9000>;
315 rx-fifo-size = <16384>;
316 tx-fifo-size = <2048>;
317 phy-mode = "rgmii";
318 phy-map = <0x00000000>;
319 rgmii-device = <&RGMII0>;
320 rgmii-channel = <0>;
321 tah-device = <&TAH0>;
322 tah-channel = <0>;
323 has-inverted-stacr-oc;
324 has-new-stacr-staopc;
325 };
326 };
328 PCIE0: pcie@d00000000 {
329 device_type = "pci";
330 #interrupt-cells = <1>;
331 #size-cells = <2>;
332 #address-cells = <3>;
333 compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
334 primary;
335 port = <0x0>; /* port number */
336 reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
337 0x0000000c 0x08010000 0x00001000>; /* Registers */
338 dcr-reg = <0x100 0x020>;
339 sdr-base = <0x300>;
341 /* Outbound ranges, one memory and one IO,
342 * later cannot be changed
343 */
344 ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
345 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
346 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
348 /* Inbound 2GB range starting at 0 */
349 dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
351 /* This drives busses 40 to 0x7f */
352 bus-range = <0x40 0x7f>;
354 /* Legacy interrupts (note the weird polarity, the bridge seems
355 * to invert PCIe legacy interrupts).
356 * We are de-swizzling here because the numbers are actually for
357 * port of the root complex virtual P2P bridge. But I want
358 * to avoid putting a node for it in the tree, so the numbers
359 * below are basically de-swizzled numbers.
360 * The real slot is on idsel 0, so the swizzling is 1:1
361 */
362 interrupt-map-mask = <0x0 0x0 0x0 0x7>;
363 interrupt-map = <
364 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
365 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
366 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
367 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
368 };
370 MSI: ppc4xx-msi@C10000000 {
371 compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
372 reg = < 0xC 0x10000000 0x100
373 0xC 0x10000000 0x100>;
374 sdr-base = <0x36C>;
375 msi-data = <0x00004440>;
376 msi-mask = <0x0000ffe0>;
377 interrupts =<0 1 2 3 4 5 6 7>;
378 interrupt-parent = <&MSI>;
379 #interrupt-cells = <1>;
380 #address-cells = <0>;
381 #size-cells = <0>;
382 msi-available-ranges = <0x0 0x100>;
383 interrupt-map = <
384 0 &UIC3 0x18 1
385 1 &UIC3 0x19 1
386 2 &UIC3 0x1A 1
387 3 &UIC3 0x1B 1
388 4 &UIC3 0x1C 1
389 5 &UIC3 0x1D 1
390 6 &UIC3 0x1E 1
391 7 &UIC3 0x1F 1
392 >;
393 };
394 };
395 };