arch/powerpc/boot/dts/cm5200.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * CM5200 board Device Tree Source
   4  *
   5  * Copyright (C) 2007 Semihalf
   6  * Marian Balakowicz <m8@semihalf.com>
   7  */
   8
   9 /include/ "mpc5200b.dtsi"
  10
  11 &gpt0 { fsl,has-wdt; };
  12
  13 / {
  14         model = "schindler,cm5200";
  15         compatible = "schindler,cm5200";
  16
  17         soc5200@f0000000 {
  18                 can@900 {
  19                         status = "disabled";
  20                 };
  21
  22                 can@980 {
  23                         status = "disabled";
  24                 };
  25
  26                 psc@2000 {              // PSC1
  27                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  28                 };
  29
  30                 psc@2200 {              // PSC2
  31                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  32                 };
  33
  34                 psc@2400 {              // PSC3
  35                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  36                 };
  37
  38                 psc@2600 {              // PSC4
  39                         status = "disabled";
  40                 };
  41
  42                 psc@2800 {              // PSC5
  43                         status = "disabled";
  44                 };
  45
  46                 psc@2c00 {              // PSC6
  47                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  48                 };
  49
  50                 ethernet@3000 {
  51                         phy-handle = <&phy0>;
  52                 };
  53
  54                 mdio@3000 {
  55                         phy0: ethernet-phy@0 {
  56                                 reg = <0>;
  57                         };
  58                 };
  59
  60                 ata@3a00 {
  61                         status = "disabled";
  62                 };
  63
  64                 i2c@3d00 {
  65                         status = "disabled";
  66                 };
  67
  68         };
  69
  70         pci@f0000d00 {
  71                 status = "disabled";
  72         };
  73
  74         localbus {
  75                 // 16-bit flash device at LocalPlus Bus CS0
  76                 flash@0,0 {
  77                         compatible = "cfi-flash";
  78                         reg = <0 0 0x2000000>;
  79                         bank-width = <2>;
  80                         device-width = <2>;
  81                         #size-cells = <1>;
  82                         #address-cells = <1>;
  83                 };
  84         };
  85 };