WIP FPC-III support
[linux/fpc-iii.git] / arch / powerpc / boot / dts / kmeter1.dts
blob154f5d293fd3b37718cf3a7ecd3887531c325084
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Keymile KMETER1 Device Tree Source
4  *
5  * 2008-2011 DENX Software Engineering GmbH
6  */
8 /dts-v1/;
10 / {
11         model = "KMETER1";
12         compatible = "keymile,KMETER1";
13         #address-cells = <1>;
14         #size-cells = <1>;
16         aliases {
17                 ethernet0 = &enet_piggy2;
18                 ethernet1 = &enet_estar1;
19                 ethernet2 = &enet_estar2;
20                 ethernet3 = &enet_eth1;
21                 ethernet4 = &enet_eth2;
22                 ethernet5 = &enet_eth3;
23                 ethernet6 = &enet_eth4;
24                 serial0 = &serial0;
25         };
27         cpus {
28                 #address-cells = <1>;
29                 #size-cells = <0>;
31                 PowerPC,8360@0 {
32                         device_type = "cpu";
33                         reg = <0x0>;
34                         d-cache-line-size = <32>;       // 32 bytes
35                         i-cache-line-size = <32>;       // 32 bytes
36                         d-cache-size = <32768>;         // L1, 32K
37                         i-cache-size = <32768>;         // L1, 32K
38                         timebase-frequency = <0>;       /* Filled in by U-Boot */
39                         bus-frequency = <0>;    /* Filled in by U-Boot */
40                         clock-frequency = <0>;  /* Filled in by U-Boot */
41                 };
42         };
44         memory {
45                 device_type = "memory";
46                 reg = <0 0>;    /* Filled in by U-Boot */
47         };
49         soc8360@e0000000 {
50                 #address-cells = <1>;
51                 #size-cells = <1>;
52                 device_type = "soc";
53                 compatible = "fsl,mpc8360-immr", "simple-bus";
54                 ranges = <0x0 0xe0000000 0x00200000>;
55                 reg = <0xe0000000 0x00000200>;
56                 bus-frequency = <0>;    /* Filled in by U-Boot */
58                 pmc: power@b00 {
59                         compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
60                         reg = <0xb00 0x100 0xa00 0x100>;
61                         interrupts = <80 0x8>;
62                         interrupt-parent = <&ipic>;
63                 };
65                 i2c@3000 {
66                         #address-cells = <1>;
67                         #size-cells = <0>;
68                         cell-index = <0>;
69                         compatible = "fsl,mpc8313-i2c","fsl-i2c";
70                         reg = <0x3000 0x100>;
71                         interrupts = <14 0x8>;
72                         interrupt-parent = <&ipic>;
73                         clock-frequency = <400000>;
74                 };
76                 serial0: serial@4500 {
77                         cell-index = <0>;
78                         device_type = "serial";
79                         compatible = "fsl,ns16550", "ns16550";
80                         reg = <0x4500 0x100>;
81                         clock-frequency = <264000000>;
82                         interrupts = <9 0x8>;
83                         interrupt-parent = <&ipic>;
84                 };
86                 dma@82a8 {
87                         #address-cells = <1>;
88                         #size-cells = <1>;
89                         compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
90                         reg = <0x82a8 4>;
91                         ranges = <0 0x8100 0x1a8>;
92                         interrupt-parent = <&ipic>;
93                         interrupts = <71 8>;
94                         cell-index = <0>;
95                         dma-channel@0 {
96                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
97                                 reg = <0 0x80>;
98                                 interrupt-parent = <&ipic>;
99                                 interrupts = <71 8>;
100                         };
101                         dma-channel@80 {
102                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
103                                 reg = <0x80 0x80>;
104                                 interrupt-parent = <&ipic>;
105                                 interrupts = <71 8>;
106                         };
107                         dma-channel@100 {
108                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
109                                 reg = <0x100 0x80>;
110                                 interrupt-parent = <&ipic>;
111                                 interrupts = <71 8>;
112                         };
113                         dma-channel@180 {
114                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
115                                 reg = <0x180 0x28>;
116                                 interrupt-parent = <&ipic>;
117                                 interrupts = <71 8>;
118                         };
119                 };
121                 ipic: pic@700 {
122                         #address-cells = <0>;
123                         #interrupt-cells = <2>;
124                         compatible = "fsl,pq2pro-pic", "fsl,ipic";
125                         interrupt-controller;
126                         reg = <0x700 0x100>;
127                 };
129                 par_io@1400 {
130                         #address-cells = <1>;
131                         #size-cells = <0>;
132                         reg = <0x1400 0x100>;
133                         compatible = "fsl,mpc8360-par_io";
134                         num-ports = <7>;
136                         qe_pio_c: gpio-controller@30 {
137                                 #gpio-cells = <2>;
138                                 compatible = "fsl,mpc8360-qe-pario-bank",
139                                              "fsl,mpc8323-qe-pario-bank";
140                                 reg = <0x1430 0x18>;
141                                 gpio-controller;
142                         };
143                         pio_ucc1: ucc_pin@0 {
144                                 reg = <0>;
146                                 pio-map = <
147                                         /* port pin dir open_drain assignment has_irq */
148                                         0   1  3  0  2  0       /* MDIO   */
149                                         0   2  1  0  1  0       /* MDC    */
151                                         0   3  1  0  1  0       /* TxD0   */
152                                         0   4  1  0  1  0       /* TxD1   */
153                                         0   5  1  0  1  0       /* TxD2   */
154                                         0   6  1  0  1  0       /* TxD3   */
155                                         0   9  2  0  1  0       /* RxD0   */
156                                         0  10  2  0  1  0       /* RxD1   */
157                                         0  11  2  0  1  0       /* RxD2   */
158                                         0  12  2  0  1  0       /* RxD3   */
159                                         0   7  1  0  1  0       /* TX_EN  */
160                                         0   8  1  0  1  0       /* TX_ER  */
161                                         0  15  2  0  1  0       /* RX_DV  */
162                                         0  16  2  0  1  0       /* RX_ER  */
163                                         0   0  2  0  1  0       /* RX_CLK */
164                                         2   9  1  0  3  0       /* GTX_CLK - CLK10 */
165                                         2   8  2  0  1  0       /* GTX125  - CLK9  */
166                                 >;
167                         };
169                         pio_ucc2: ucc_pin@1 {
170                                 reg = <1>;
172                                 pio-map = <
173                                         /* port pin dir open_drain assignment has_irq */
174                                         0   1  3  0  2  0       /* MDIO   */
175                                         0   2  1  0  1  0       /* MDC    */
177                                         0  17  1  0  1  0       /* TxD0   */
178                                         0  18  1  0  1  0       /* TxD1   */
179                                         0  19  1  0  1  0       /* TxD2   */
180                                         0  20  1  0  1  0       /* TxD3   */
181                                         0  23  2  0  1  0       /* RxD0   */
182                                         0  24  2  0  1  0       /* RxD1   */
183                                         0  25  2  0  1  0       /* RxD2   */
184                                         0  26  2  0  1  0       /* RxD3   */
185                                         0  21  1  0  1  0       /* TX_EN  */
186                                         0  22  1  0  1  0       /* TX_ER  */
187                                         0  29  2  0  1  0       /* RX_DV  */
188                                         0  30  2  0  1  0       /* RX_ER  */
189                                         0  31  2  0  1  0       /* RX_CLK */
190                                         2  2   1  0  2  0       /* GTX_CLK - CLK3  */
191                                         2  3   2  0  1  0       /* GTX125  - CLK4  */
192                                 >;
193                         };
195                         pio_ucc4: ucc_pin@3 {
196                                 reg = <3>;
198                                 pio-map = <
199                                         /* port pin dir open_drain assignment has_irq */
200                                         0   1  3  0  2  0       /* MDIO */
201                                         0   2  1  0  1  0       /* MDC  */
203                                         1  14  1  0  1  0       /* TxD0   (PB14, out, f1) */
204                                         1  15  1  0  1  0       /* TxD1   (PB15, out, f1) */
205                                         1  20  2  0  1  0       /* RxD0   (PB20, in,  f1) */
206                                         1  21  2  0  1  0       /* RxD1   (PB21, in,  f1) */
207                                         1  18  1  0  1  0       /* TX_EN  (PB18, out, f1) */
208                                         1  26  2  0  1  0       /* RX_DV  (PB26, in,  f1) */
209                                         1  27  2  0  1  0       /* RX_ER  (PB27, in,  f1) */
211                                         2  16  2  0  1  0       /* UCC4_RMII_CLK (CLK17) */
212                                 >;
213                         };
215                         pio_ucc5: ucc_pin@4 {
216                                 reg = <4>;
218                                 pio-map = <
219                                         /* port pin dir open_drain assignment has_irq */
220                                         0   1  3  0  2  0       /* MDIO */
221                                         0   2  1  0  1  0       /* MDC  */
223                                         3   0  1  0  1  0       /* TxD0  (PD0,  out, f1) */
224                                         3   1  1  0  1  0       /* TxD1  (PD1,  out, f1) */
225                                         3   6  2  0  1  0       /* RxD0  (PD6,   in, f1) */
226                                         3   7  2  0  1  0       /* RxD1  (PD7,   in, f1) */
227                                         3   4  1  0  1  0       /* TX_EN (PD4,  out, f1) */
228                                         3  12  2  0  1  0       /* RX_DV (PD12,  in, f1) */
229                                         3  13  2  0  1  0       /* RX_ER (PD13,  in, f1) */
230                                 >;
231                         };
233                         pio_ucc6: ucc_pin@5 {
234                                 reg = <5>;
236                                 pio-map = <
237                                         /* port pin dir open_drain assignment has_irq */
238                                         0   1  3  0  2  0       /* MDIO */
239                                         0   2  1  0  1  0       /* MDC  */
241                                         3  14  1  0  1  0       /* TxD0   (PD14, out, f1) */
242                                         3  15  1  0  1  0       /* TxD1   (PD15, out, f1) */
243                                         3  20  2  0  1  0       /* RxD0   (PD20, in,  f1) */
244                                         3  21  2  0  1  0       /* RxD1   (PD21, in,  f1) */
245                                         3  18  1  0  1  0       /* TX_EN  (PD18, out, f1) */
246                                         3  26  2  0  1  0       /* RX_DV  (PD26, in,  f1) */
247                                         3  27  2  0  1  0       /* RX_ER  (PD27, in,  f1) */
248                                 >;
249                         };
251                         pio_ucc7: ucc_pin@6 {
252                                 reg = <6>;
254                                 pio-map = <
255                                         /* port pin dir open_drain assignment has_irq */
256                                         0   1  3  0  2  0       /* MDIO */
257                                         0   2  1  0  1  0       /* MDC  */
259                                         4   0  1  0  1  0       /* TxD0   (PE0,  out, f1) */
260                                         4   1  1  0  1  0       /* TxD1   (PE1,  out, f1) */
261                                         4   6  2  0  1  0       /* RxD0   (PE6,   in, f1) */
262                                         4   7  2  0  1  0       /* RxD1   (PE7,   in, f1) */
263                                         4   4  1  0  1  0       /* TX_EN  (PE4,  out, f1) */
264                                         4  12  2  0  1  0       /* RX_DV  (PE12,  in, f1) */
265                                         4  13  2  0  1  0       /* RX_ER  (PE13,  in, f1) */
266                                 >;
267                         };
269                         pio_ucc8: ucc_pin@7 {
270                                 reg = <7>;
272                                 pio-map = <
273                                         /* port pin dir open_drain assignment has_irq */
274                                         0   1  3  0  2  0       /* MDIO */
275                                         0   2  1  0  1  0       /* MDC  */
277                                         4  14  1  0  2  0       /* TxD0   (PE14, out, f2) */
278                                         4  15  1  0  1  0       /* TxD1   (PE15, out, f1) */
279                                         4  20  2  0  1  0       /* RxD0   (PE20, in,  f1) */
280                                         4  21  2  0  1  0       /* RxD1   (PE21, in,  f1) */
281                                         4  18  1  0  1  0       /* TX_EN  (PE18, out, f1) */
282                                         4  26  2  0  1  0       /* RX_DV  (PE26, in,  f1) */
283                                         4  27  2  0  1  0       /* RX_ER  (PE27, in,  f1) */
285                                         2  15  2  0  1  0       /* UCCx_RMII_CLK (CLK16) */
286                                 >;
287                         };
289                 };
291                 qe@100000 {
292                         #address-cells = <1>;
293                         #size-cells = <1>;
294                         compatible = "fsl,qe";
295                         ranges = <0x0 0x100000 0x100000>;
296                         reg = <0x100000 0x480>;
297                         clock-frequency = <0>;  /* Filled in by U-Boot */
298                         brg-frequency = <0>;    /* Filled in by U-Boot */
299                         bus-frequency = <0>;    /* Filled in by U-Boot */
301                         muram@10000 {
302                                 #address-cells = <1>;
303                                 #size-cells = <1>;
304                                 compatible = "fsl,qe-muram", "fsl,cpm-muram";
305                                 ranges = <0x0 0x00010000 0x0000c000>;
307                                 data-only@0 {
308                                         compatible = "fsl,qe-muram-data",
309                                                      "fsl,cpm-muram-data";
310                                         reg = <0x0 0xc000>;
311                                 };
312                         };
314                         /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
315                         enet_estar1: ucc@2000 {
316                                 device_type = "network";
317                                 compatible = "ucc_geth";
318                                 cell-index = <1>;
319                                 reg = <0x2000 0x200>;
320                                 interrupts = <32>;
321                                 interrupt-parent = <&qeic>;
322                                 local-mac-address = [ 00 00 00 00 00 00 ];
323                                 rx-clock-name = "none";
324                                 tx-clock-name = "clk9";
325                                 phy-handle = <&phy_estar1>;
326                                 phy-connection-type = "rgmii-id";
327                                 pio-handle = <&pio_ucc1>;
328                         };
330                         /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
331                         enet_estar2: ucc@3000 {
332                                 device_type = "network";
333                                 compatible = "ucc_geth";
334                                 cell-index = <2>;
335                                 reg = <0x3000 0x200>;
336                                 interrupts = <33>;
337                                 interrupt-parent = <&qeic>;
338                                 local-mac-address = [ 00 00 00 00 00 00 ];
339                                 rx-clock-name = "none";
340                                 tx-clock-name = "clk4";
341                                 phy-handle = <&phy_estar2>;
342                                 phy-connection-type = "rgmii-id";
343                                 pio-handle = <&pio_ucc2>;
344                         };
346                         /* Piggy2 (UCC4, MDIO 0x00, RMII) */
347                         enet_piggy2: ucc@3200 {
348                                 device_type = "network";
349                                 compatible = "ucc_geth";
350                                 cell-index = <4>;
351                                 reg = <0x3200 0x200>;
352                                 interrupts = <35>;
353                                 interrupt-parent = <&qeic>;
354                                 local-mac-address = [ 00 00 00 00 00 00 ];
355                                 rx-clock-name = "none";
356                                 tx-clock-name = "clk17";
357                                 phy-handle = <&phy_piggy2>;
358                                 phy-connection-type = "rmii";
359                                 pio-handle = <&pio_ucc4>;
360                         };
362                         /* Eth-1 (UCC5, MDIO 0x08, RMII) */
363                         enet_eth1: ucc@2400 {
364                                 device_type = "network";
365                                 compatible = "ucc_geth";
366                                 cell-index = <5>;
367                                 reg = <0x2400 0x200>;
368                                 interrupts = <40>;
369                                 interrupt-parent = <&qeic>;
370                                 local-mac-address = [ 00 00 00 00 00 00 ];
371                                 rx-clock-name = "none";
372                                 tx-clock-name = "clk16";
373                                 phy-handle = <&phy_eth1>;
374                                 phy-connection-type = "rmii";
375                                 pio-handle = <&pio_ucc5>;
376                         };
378                         /* Eth-2 (UCC6, MDIO 0x09, RMII) */
379                         enet_eth2: ucc@3400 {
380                                 device_type = "network";
381                                 compatible = "ucc_geth";
382                                 cell-index = <6>;
383                                 reg = <0x3400 0x200>;
384                                 interrupts = <41>;
385                                 interrupt-parent = <&qeic>;
386                                 local-mac-address = [ 00 00 00 00 00 00 ];
387                                 rx-clock-name = "none";
388                                 tx-clock-name = "clk16";
389                                 phy-handle = <&phy_eth2>;
390                                 phy-connection-type = "rmii";
391                                 pio-handle = <&pio_ucc6>;
392                         };
394                         /* Eth-3 (UCC7, MDIO 0x0a, RMII) */
395                         enet_eth3: ucc@2600 {
396                                 device_type = "network";
397                                 compatible = "ucc_geth";
398                                 cell-index = <7>;
399                                 reg = <0x2600 0x200>;
400                                 interrupts = <42>;
401                                 interrupt-parent = <&qeic>;
402                                 local-mac-address = [ 00 00 00 00 00 00 ];
403                                 rx-clock-name = "none";
404                                 tx-clock-name = "clk16";
405                                 phy-handle = <&phy_eth3>;
406                                 phy-connection-type = "rmii";
407                                 pio-handle = <&pio_ucc7>;
408                         };
410                         /* Eth-4 (UCC8, MDIO 0x0b, RMII) */
411                         enet_eth4: ucc@3600 {
412                                 device_type = "network";
413                                 compatible = "ucc_geth";
414                                 cell-index = <8>;
415                                 reg = <0x3600 0x200>;
416                                 interrupts = <43>;
417                                 interrupt-parent = <&qeic>;
418                                 local-mac-address = [ 00 00 00 00 00 00 ];
419                                 rx-clock-name = "none";
420                                 tx-clock-name = "clk16";
421                                 phy-handle = <&phy_eth4>;
422                                 phy-connection-type = "rmii";
423                                 pio-handle = <&pio_ucc8>;
424                         };
426                         mdio@3320 {
427                                 #address-cells = <1>;
428                                 #size-cells = <0>;
429                                 reg = <0x3320 0x18>;
430                                 compatible = "fsl,ucc-mdio";
432                                 /* Piggy2 (UCC4, MDIO 0x00, RMII) */
433                                 phy_piggy2: ethernet-phy@0 {
434                                         reg = <0x0>;
435                                 };
437                                 /* Eth-1 (UCC5, MDIO 0x08, RMII) */
438                                 phy_eth1: ethernet-phy@8 {
439                                         reg = <0x08>;
440                                 };
442                                 /* Eth-2 (UCC6, MDIO 0x09, RMII) */
443                                 phy_eth2: ethernet-phy@9 {
444                                         reg = <0x09>;
445                                 };
447                                 /* Eth-3 (UCC7, MDIO 0x0a, RMII) */
448                                 phy_eth3: ethernet-phy@a {
449                                         reg = <0x0a>;
450                                 };
452                                 /* Eth-4 (UCC8, MDIO 0x0b, RMII) */
453                                 phy_eth4: ethernet-phy@b {
454                                         reg = <0x0b>;
455                                 };
457                                 /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
458                                 phy_estar1: ethernet-phy@10 {
459                                         interrupt-parent = <&ipic>;
460                                         interrupts = <17 0x8>;
461                                         reg = <0x10>;
462                                 };
464                                 /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
465                                 phy_estar2: ethernet-phy@11 {
466                                         interrupt-parent = <&ipic>;
467                                         interrupts = <18 0x8>;
468                                         reg = <0x11>;
469                                 };
470                         };
472                         qeic: interrupt-controller@80 {
473                                 interrupt-controller;
474                                 compatible = "fsl,qe-ic";
475                                 #address-cells = <0>;
476                                 #interrupt-cells = <1>;
477                                 reg = <0x80 0x80>;
478                                 big-endian;
479                                 interrupts = <
480                                         32 0x8
481                                         33 0x8
482                                         34 0x8
483                                         35 0x8
484                                         40 0x8
485                                         41 0x8
486                                         42 0x8
487                                         43 0x8
488                                 >;
489                                 interrupt-parent = <&ipic>;
490                         };
491                 };
492         };
494         localbus@e0005000 {
495                 #address-cells = <2>;
496                 #size-cells = <1>;
497                 compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
498                              "simple-bus";
499                 reg = <0xe0005000 0xd8>;
500                 ranges = <0 0 0xf0000000 0x04000000     /* LB 0 */
501                           1 0 0xe8000000 0x01000000     /* LB 1 */
502                           3 0 0xa0000000 0x10000000>;   /* LB 3 */
504                 flash@0,0 {
505                         compatible = "cfi-flash";
506                         reg = <0 0 0x04000000>;
507                         #address-cells = <1>;
508                         #size-cells = <1>;
509                         bank-width = <2>;
510                         partition@0 { /* 768KB */
511                                 label = "u-boot";
512                                 reg = <0 0xC0000>;
513                         };
514                         partition@c0000 { /* 128KB */
515                                 label = "env";
516                                 reg = <0xC0000 0x20000>;
517                         };
518                         partition@e0000 { /* 128KB */
519                                 label = "envred";
520                                 reg = <0xE0000 0x20000>;
521                         };
522                         partition@100000 { /* 64512KB */
523                                 label = "ubi0";
524                                 reg = <0x100000 0x3F00000>;
525                         };
526                 };
527         };