2 * Device Tree Souce for Buffalo KuroboxHG
4 * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use
5 * the default configuration linkstation_defconfig.
7 * Based on sandpoint.dts
9 * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
10 * Copyright 2008 Freescale Semiconductor, Inc.
12 * This file is licensed under
13 * the terms of the GNU General Public License version 2. This program
14 * is licensed "as is" without any warranty of any kind, whether express
17 XXXX add flash parts, rtc, ??
25 compatible = "linkstation";
39 PowerPC,603e { /* Really 8241 */
42 clock-frequency = <266000000>; /* Fixed by bootloader */
43 timebase-frequency = <32522240>; /* Fixed by bootloader */
44 bus-frequency = <0>; /* Fixed by bootloader */
45 /* Following required by dtc but not used */
46 i-cache-size = <0x4000>;
47 d-cache-size = <0x4000>;
52 device_type = "memory";
53 reg = <0x0 0x8000000>;
56 soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
60 compatible = "mpc10x";
61 store-gathering = <0>; /* 0 == off, !0 == on */
62 reg = <0x80000000 0x100000>;
63 ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */
64 0xfc000000 0xfc000000 0x100000 /* EUMB */
65 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */
66 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */
67 0xfef00000 0xfef00000 0x100000>; /* pci iack */
73 compatible = "fsl-i2c";
74 reg = <0x80003000 0x1000>;
76 interrupt-parent = <&mpic>;
79 compatible = "ricoh,rs5c372a";
84 serial0: serial@80004500 {
86 device_type = "serial";
87 compatible = "fsl,ns16550", "ns16550";
88 reg = <0x80004500 0x8>;
89 clock-frequency = <130041000>;
90 current-speed = <9600>;
92 interrupt-parent = <&mpic>;
95 serial1: serial@80004600 {
97 device_type = "serial";
98 compatible = "fsl,ns16550", "ns16550";
99 reg = <0x80004600 0x8>;
100 clock-frequency = <130041000>;
101 current-speed = <57600>;
103 interrupt-parent = <&mpic>;
106 mpic: interrupt-controller@80040000 {
107 #interrupt-cells = <2>;
108 #address-cells = <0>;
109 device_type = "open-pic";
110 compatible = "chrp,open-pic";
111 interrupt-controller;
112 reg = <0x80040000 0x40000>;
116 #address-cells = <3>;
118 #interrupt-cells = <1>;
120 compatible = "mpc10x-pci";
121 reg = <0xfec00000 0x400000>;
122 ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000
123 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
125 clock-frequency = <133333333>;
126 interrupt-parent = <&mpic>;
127 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
129 /* IDSEL 11 - IRQ0 ETH */
130 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
131 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
132 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
133 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
134 /* IDSEL 12 - IRQ1 IDE0 */
135 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
136 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
137 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
138 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
139 /* IDSEL 14 - IRQ3 USB2.0 */
140 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
141 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
142 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
143 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1