arch/powerpc/boot/dts/mpc5200b.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * base MPC5200b Device Tree Source
   4  *
   5  * Copyright (C) 2010 SecretLab
   6  * Grant Likely <grant@secretlab.ca>
   7  * John Bonesio <bones@secretlab.ca>
   8  */
   9
  10 /dts-v1/;
  11
  12 / {
  13         model = "fsl,mpc5200b";
  14         compatible = "fsl,mpc5200b";
  15         #address-cells = <1>;
  16         #size-cells = <1>;
  17         interrupt-parent = <&mpc5200_pic>;
  18
  19         cpus {
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22
  23                 powerpc: PowerPC,5200@0 {
  24                         device_type = "cpu";
  25                         reg = <0>;
  26                         d-cache-line-size = <32>;
  27                         i-cache-line-size = <32>;
  28                         d-cache-size = <0x4000>;        // L1, 16K
  29                         i-cache-size = <0x4000>;        // L1, 16K
  30                         timebase-frequency = <0>;       // from bootloader
  31                         bus-frequency = <0>;            // from bootloader
  32                         clock-frequency = <0>;          // from bootloader
  33                 };
  34         };
  35
  36         memory: memory {
  37                 device_type = "memory";
  38                 reg = <0x00000000 0x04000000>;  // 64MB
  39         };
  40
  41         soc: soc5200@f0000000 {
  42                 #address-cells = <1>;
  43                 #size-cells = <1>;
  44                 compatible = "fsl,mpc5200b-immr";
  45                 ranges = <0 0xf0000000 0x0000c000>;
  46                 reg = <0xf0000000 0x00000100>;
  47                 bus-frequency = <0>;            // from bootloader
  48                 system-frequency = <0>;         // from bootloader
  49
  50                 cdm@200 {
  51                         compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
  52                         reg = <0x200 0x38>;
  53                 };
  54
  55                 mpc5200_pic: interrupt-controller@500 {
  56                         // 5200 interrupts are encoded into two levels;
  57                         interrupt-controller;
  58                         #interrupt-cells = <3>;
  59                         compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
  60                         reg = <0x500 0x80>;
  61                 };
  62
  63                 gpt0: timer@600 {       // General Purpose Timer
  64                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  65                         #gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
  66                         reg = <0x600 0x10>;
  67                         interrupts = <1 9 0>;
  68                         // add 'fsl,has-wdt' to enable watchdog
  69                 };
  70
  71                 gpt1: timer@610 {       // General Purpose Timer
  72                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  73                         #gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
  74                         reg = <0x610 0x10>;
  75                         interrupts = <1 10 0>;
  76                 };
  77
  78                 gpt2: timer@620 {       // General Purpose Timer
  79                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  80                         #gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
  81                         reg = <0x620 0x10>;
  82                         interrupts = <1 11 0>;
  83                 };
  84
  85                 gpt3: timer@630 {       // General Purpose Timer
  86                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  87                         #gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
  88                         reg = <0x630 0x10>;
  89                         interrupts = <1 12 0>;
  90                 };
  91
  92                 gpt4: timer@640 {       // General Purpose Timer
  93                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  94                         #gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
  95                         reg = <0x640 0x10>;
  96                         interrupts = <1 13 0>;
  97                 };
  98
  99                 gpt5: timer@650 {       // General Purpose Timer
 100                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 101                         #gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 102                         reg = <0x650 0x10>;
 103                         interrupts = <1 14 0>;
 104                 };
 105
 106                 gpt6: timer@660 {       // General Purpose Timer
 107                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 108                         #gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 109                         reg = <0x660 0x10>;
 110                         interrupts = <1 15 0>;
 111                 };
 112
 113                 gpt7: timer@670 {       // General Purpose Timer
 114                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 115                         #gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 116                         reg = <0x670 0x10>;
 117                         interrupts = <1 16 0>;
 118                 };
 119
 120                 rtc@800 {       // Real time clock
 121                         compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
 122                         reg = <0x800 0x100>;
 123                         interrupts = <1 5 0 1 6 0>;
 124                 };
 125
 126                 can@900 {
 127                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 128                         interrupts = <2 17 0>;
 129                         reg = <0x900 0x80>;
 130                 };
 131
 132                 can@980 {
 133                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 134                         interrupts = <2 18 0>;
 135                         reg = <0x980 0x80>;
 136                 };
 137
 138                 gpio_simple: gpio@b00 {
 139                         compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
 140                         reg = <0xb00 0x40>;
 141                         interrupts = <1 7 0>;
 142                         gpio-controller;
 143                         #gpio-cells = <2>;
 144                 };
 145
 146                 gpio_wkup: gpio@c00 {
 147                         compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
 148                         reg = <0xc00 0x40>;
 149                         interrupts = <1 8 0 0 3 0>;
 150                         gpio-controller;
 151                         #gpio-cells = <2>;
 152                 };
 153
 154                 spi@f00 {
 155                         #address-cells = <1>;
 156                         #size-cells = <0>;
 157                         compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 158                         reg = <0xf00 0x20>;
 159                         interrupts = <2 13 0 2 14 0>;
 160                 };
 161
 162                 usb: usb@1000 {
 163                         compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
 164                         reg = <0x1000 0xff>;
 165                         interrupts = <2 6 0>;
 166                 };
 167
 168                 dma-controller@1200 {
 169                         compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
 170                         reg = <0x1200 0x80>;
 171                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 172                                       3 4 0  3 5 0  3 6 0  3 7 0
 173                                       3 8 0  3 9 0  3 10 0  3 11 0
 174                                       3 12 0  3 13 0  3 14 0  3 15 0>;
 175                 };
 176
 177                 xlb@1f00 {
 178                         compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
 179                         reg = <0x1f00 0x100>;
 180                 };
 181
 182                 psc1: psc@2000 {                // PSC1
 183                         compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
 184                         reg = <0x2000 0x100>;
 185                         interrupts = <2 1 0>;
 186                 };
 187
 188                 psc2: psc@2200 {                // PSC2
 189                         compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
 190                         reg = <0x2200 0x100>;
 191                         interrupts = <2 2 0>;
 192                 };
 193
 194                 psc3: psc@2400 {                // PSC3
 195                         compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
 196                         reg = <0x2400 0x100>;
 197                         interrupts = <2 3 0>;
 198                 };
 199
 200                 psc4: psc@2600 {                // PSC4
 201                         compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
 202                         reg = <0x2600 0x100>;
 203                         interrupts = <2 11 0>;
 204                 };
 205
 206                 psc5: psc@2800 {                // PSC5
 207                         compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
 208                         reg = <0x2800 0x100>;
 209                         interrupts = <2 12 0>;
 210                 };
 211
 212                 psc6: psc@2c00 {                // PSC6
 213                         compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
 214                         reg = <0x2c00 0x100>;
 215                         interrupts = <2 4 0>;
 216                 };
 217
 218                 eth0: ethernet@3000 {
 219                         compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
 220                         reg = <0x3000 0x400>;
 221                         local-mac-address = [ 00 00 00 00 00 00 ];
 222                         interrupts = <2 5 0>;
 223                 };
 224
 225                 mdio@3000 {
 226                         #address-cells = <1>;
 227                         #size-cells = <0>;
 228                         compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
 229                         reg = <0x3000 0x400>;   // fec range, since we need to setup fec interrupts
 230                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 231                 };
 232
 233                 ata@3a00 {
 234                         compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
 235                         reg = <0x3a00 0x100>;
 236                         interrupts = <2 7 0>;
 237                 };
 238
 239                 sclpc@3c00 {
 240                         compatible = "fsl,mpc5200-lpbfifo";
 241                         reg = <0x3c00 0x60>;
 242                         interrupts = <2 23 0>;
 243                 };
 244
 245                 i2c@3d00 {
 246                         #address-cells = <1>;
 247                         #size-cells = <0>;
 248                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 249                         reg = <0x3d00 0x40>;
 250                         interrupts = <2 15 0>;
 251                 };
 252
 253                 i2c@3d40 {
 254                         #address-cells = <1>;
 255                         #size-cells = <0>;
 256                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 257                         reg = <0x3d40 0x40>;
 258                         interrupts = <2 16 0>;
 259                 };
 260
 261                 sram@8000 {
 262                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
 263                         reg = <0x8000 0x4000>;
 264                 };
 265         };
 266
 267         pci: pci@f0000d00 {
 268                 #interrupt-cells = <1>;
 269                 #size-cells = <2>;
 270                 #address-cells = <3>;
 271                 device_type = "pci";
 272                 compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
 273                 reg = <0xf0000d00 0x100>;
 274                 // interrupt-map-mask = need to add
 275                 // interrupt-map = need to add
 276                 clock-frequency = <0>; // From boot loader
 277                 interrupts = <2 8 0 2 9 0 2 10 0>;
 278                 bus-range = <0 0>;
 279                 // ranges = need to add
 280         };
 281
 282         localbus: localbus {
 283                 compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 284                 #address-cells = <2>;
 285                 #size-cells = <1>;
 286                 ranges = <0 0 0xfc000000 0x2000000>;
 287         };
 288 };