| blob | 33bbe58c1ad087bbed4bd2523334c04bf3c784d2 |
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * MPC8610 HPCD Device Tree Source
4 *
5 * Copyright 2007-2008 Freescale Semiconductor Inc.
6 */
8 /dts-v1/;
10 / {
11 model = "MPC8610HPCD";
12 compatible = "fsl,MPC8610HPCD";
13 #address-cells = <1>;
14 #size-cells = <1>;
16 aliases {
17 serial0 = &serial0;
18 serial1 = &serial1;
19 pci0 = &pci0;
20 pci1 = &pci1;
21 pci2 = &pci2;
22 };
24 cpus {
25 #address-cells = <1>;
26 #size-cells = <0>;
28 PowerPC,8610@0 {
29 device_type = "cpu";
30 reg = <0>;
31 d-cache-line-size = <32>;
32 i-cache-line-size = <32>;
33 d-cache-size = <32768>; // L1
34 i-cache-size = <32768>; // L1
35 sleep = <&pmc 0x00008000 0 // core
36 &pmc 0x00004000 0>; // timebase
37 timebase-frequency = <0>; // From uboot
38 bus-frequency = <0>; // From uboot
39 clock-frequency = <0>; // From uboot
40 };
41 };
43 memory {
44 device_type = "memory";
45 reg = <0x00000000 0x20000000>; // 512M at 0x0
46 };
48 localbus@e0005000 {
49 #address-cells = <2>;
50 #size-cells = <1>;
51 compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus";
52 reg = <0xe0005000 0x1000>;
53 interrupts = <19 2>;
54 interrupt-parent = <&mpic>;
55 ranges = <0 0 0xf8000000 0x08000000
56 1 0 0xf0000000 0x08000000
57 2 0 0xe8400000 0x00008000
58 4 0 0xe8440000 0x00008000
59 5 0 0xe8480000 0x00008000
60 6 0 0xe84c0000 0x00008000
61 3 0 0xe8000000 0x00000020>;
62 sleep = <&pmc 0x08000000 0>;
64 flash@0,0 {
65 compatible = "cfi-flash";
66 reg = <0 0 0x8000000>;
67 bank-width = <2>;
68 device-width = <1>;
69 };
71 flash@1,0 {
72 compatible = "cfi-flash";
73 reg = <1 0 0x8000000>;
74 bank-width = <2>;
75 device-width = <1>;
76 };
78 flash@2,0 {
79 compatible = "fsl,mpc8610-fcm-nand",
80 "fsl,elbc-fcm-nand";
81 reg = <2 0 0x8000>;
82 };
84 flash@4,0 {
85 compatible = "fsl,mpc8610-fcm-nand",
86 "fsl,elbc-fcm-nand";
87 reg = <4 0 0x8000>;
88 };
90 flash@5,0 {
91 compatible = "fsl,mpc8610-fcm-nand",
92 "fsl,elbc-fcm-nand";
93 reg = <5 0 0x8000>;
94 };
96 flash@6,0 {
97 compatible = "fsl,mpc8610-fcm-nand",
98 "fsl,elbc-fcm-nand";
99 reg = <6 0 0x8000>;
100 };
102 board-control@3,0 {
103 #address-cells = <1>;
104 #size-cells = <1>;
105 compatible = "fsl,fpga-pixis";
106 reg = <3 0 0x20>;
107 ranges = <0 3 0 0x20>;
108 interrupt-parent = <&mpic>;
109 interrupts = <8 8>;
111 sdcsr_pio: gpio-controller@a {
112 #gpio-cells = <2>;
113 compatible = "fsl,fpga-pixis-gpio-bank";
114 reg = <0xa 1>;
115 gpio-controller;
116 };
117 };
118 };
120 soc@e0000000 {
121 #address-cells = <1>;
122 #size-cells = <1>;
123 #interrupt-cells = <2>;
124 device_type = "soc";
125 compatible = "fsl,mpc8610-immr", "simple-bus";
126 ranges = <0x0 0xe0000000 0x00100000>;
127 bus-frequency = <0>;
129 mcm-law@0 {
130 compatible = "fsl,mcm-law";
131 reg = <0x0 0x1000>;
132 fsl,num-laws = <10>;
133 };
135 mcm@1000 {
136 compatible = "fsl,mpc8610-mcm", "fsl,mcm";
137 reg = <0x1000 0x1000>;
138 interrupts = <17 2>;
139 interrupt-parent = <&mpic>;
140 };
142 i2c@3000 {
143 #address-cells = <1>;
144 #size-cells = <0>;
145 cell-index = <0>;
146 compatible = "fsl-i2c";
147 reg = <0x3000 0x100>;
148 interrupts = <43 2>;
149 interrupt-parent = <&mpic>;
150 dfsrr;
152 cs4270:codec@4f {
153 compatible = "cirrus,cs4270";
154 reg = <0x4f>;
155 /* MCLK source is a stand-alone oscillator */
156 clock-frequency = <12288000>;
157 };
158 };
160 i2c@3100 {
161 #address-cells = <1>;
162 #size-cells = <0>;
163 cell-index = <1>;
164 compatible = "fsl-i2c";
165 reg = <0x3100 0x100>;
166 interrupts = <43 2>;
167 interrupt-parent = <&mpic>;
168 sleep = <&pmc 0x00000004 0>;
169 dfsrr;
170 };
172 serial0: serial@4500 {
173 cell-index = <0>;
174 device_type = "serial";
175 compatible = "fsl,ns16550", "ns16550";
176 reg = <0x4500 0x100>;
177 clock-frequency = <0>;
178 interrupts = <42 2>;
179 interrupt-parent = <&mpic>;
180 sleep = <&pmc 0x00000002 0>;
181 };
183 serial1: serial@4600 {
184 cell-index = <1>;
185 device_type = "serial";
186 compatible = "fsl,ns16550", "ns16550";
187 reg = <0x4600 0x100>;
188 clock-frequency = <0>;
189 interrupts = <42 2>;
190 interrupt-parent = <&mpic>;
191 sleep = <&pmc 0x00000008 0>;
192 };
194 spi@7000 {
195 #address-cells = <1>;
196 #size-cells = <0>;
197 compatible = "fsl,mpc8610-spi", "fsl,spi";
198 reg = <0x7000 0x40>;
199 cell-index = <0>;
200 interrupts = <59 2>;
201 interrupt-parent = <&mpic>;
202 mode = "cpu";
203 cs-gpios = <&sdcsr_pio 7 0>;
204 sleep = <&pmc 0x00000800 0>;
206 mmc-slot@0 {
207 compatible = "fsl,mpc8610hpcd-mmc-slot",
208 "mmc-spi-slot";
209 reg = <0>;
210 gpios = <&sdcsr_pio 0 1 /* nCD */
211 &sdcsr_pio 1 0>; /* WP */
212 voltage-ranges = <3300 3300>;
213 spi-max-frequency = <50000000>;
214 };
215 };
217 display@2c000 {
218 compatible = "fsl,diu";
219 reg = <0x2c000 100>;
220 interrupts = <72 2>;
221 interrupt-parent = <&mpic>;
222 sleep = <&pmc 0x04000000 0>;
223 };
225 mpic: interrupt-controller@40000 {
226 interrupt-controller;
227 #address-cells = <0>;
228 #interrupt-cells = <2>;
229 reg = <0x40000 0x40000>;
230 compatible = "chrp,open-pic";
231 device_type = "open-pic";
232 };
234 msi@41600 {
235 compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
236 reg = <0x41600 0x80>;
237 msi-available-ranges = <0 0x100>;
238 interrupts = <
239 0xe0 0
240 0xe1 0
241 0xe2 0
242 0xe3 0
243 0xe4 0
244 0xe5 0
245 0xe6 0
246 0xe7 0>;
247 interrupt-parent = <&mpic>;
248 };
250 global-utilities@e0000 {
251 #address-cells = <1>;
252 #size-cells = <1>;
253 compatible = "fsl,mpc8610-guts";
254 reg = <0xe0000 0x1000>;
255 ranges = <0 0xe0000 0x1000>;
256 fsl,has-rstcr;
258 pmc: power@70 {
259 compatible = "fsl,mpc8610-pmc",
260 "fsl,mpc8641d-pmc";
261 reg = <0x70 0x20>;
262 };
263 };
265 wdt@e4000 {
266 compatible = "fsl,mpc8610-wdt";
267 reg = <0xe4000 0x100>;
268 };
270 ssi@16000 {
271 compatible = "fsl,mpc8610-ssi";
272 cell-index = <0>;
273 reg = <0x16000 0x100>;
274 interrupt-parent = <&mpic>;
275 interrupts = <62 2>;
276 fsl,mode = "i2s-slave";
277 codec-handle = <&cs4270>;
278 fsl,playback-dma = <&dma00>;
279 fsl,capture-dma = <&dma01>;
280 fsl,fifo-depth = <8>;
281 sleep = <&pmc 0 0x08000000>;
282 };
284 ssi@16100 {
285 compatible = "fsl,mpc8610-ssi";
286 status = "disabled";
287 cell-index = <1>;
288 reg = <0x16100 0x100>;
289 interrupt-parent = <&mpic>;
290 interrupts = <63 2>;
291 fsl,fifo-depth = <8>;
292 sleep = <&pmc 0 0x04000000>;
293 };
295 dma@21300 {
296 #address-cells = <1>;
297 #size-cells = <1>;
298 compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
299 cell-index = <0>;
300 reg = <0x21300 0x4>; /* DMA general status register */
301 ranges = <0x0 0x21100 0x200>;
302 sleep = <&pmc 0x00000400 0>;
304 dma00: dma-channel@0 {
305 compatible = "fsl,mpc8610-dma-channel",
306 "fsl,ssi-dma-channel";
307 cell-index = <0>;
308 reg = <0x0 0x80>;
309 interrupt-parent = <&mpic>;
310 interrupts = <20 2>;
311 };
312 dma01: dma-channel@1 {
313 compatible = "fsl,mpc8610-dma-channel",
314 "fsl,ssi-dma-channel";
315 cell-index = <1>;
316 reg = <0x80 0x80>;
317 interrupt-parent = <&mpic>;
318 interrupts = <21 2>;
319 };
320 dma-channel@2 {
321 compatible = "fsl,mpc8610-dma-channel",
322 "fsl,eloplus-dma-channel";
323 cell-index = <2>;
324 reg = <0x100 0x80>;
325 interrupt-parent = <&mpic>;
326 interrupts = <22 2>;
327 };
328 dma-channel@3 {
329 compatible = "fsl,mpc8610-dma-channel",
330 "fsl,eloplus-dma-channel";
331 cell-index = <3>;
332 reg = <0x180 0x80>;
333 interrupt-parent = <&mpic>;
334 interrupts = <23 2>;
335 };
336 };
338 dma@c300 {
339 #address-cells = <1>;
340 #size-cells = <1>;
341 compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
342 cell-index = <1>;
343 reg = <0xc300 0x4>; /* DMA general status register */
344 ranges = <0x0 0xc100 0x200>;
345 sleep = <&pmc 0x00000200 0>;
347 dma-channel@0 {
348 compatible = "fsl,mpc8610-dma-channel",
349 "fsl,eloplus-dma-channel";
350 cell-index = <0>;
351 reg = <0x0 0x80>;
352 interrupt-parent = <&mpic>;
353 interrupts = <76 2>;
354 };
355 dma-channel@1 {
356 compatible = "fsl,mpc8610-dma-channel",
357 "fsl,eloplus-dma-channel";
358 cell-index = <1>;
359 reg = <0x80 0x80>;
360 interrupt-parent = <&mpic>;
361 interrupts = <77 2>;
362 };
363 dma-channel@2 {
364 compatible = "fsl,mpc8610-dma-channel",
365 "fsl,eloplus-dma-channel";
366 cell-index = <2>;
367 reg = <0x100 0x80>;
368 interrupt-parent = <&mpic>;
369 interrupts = <78 2>;
370 };
371 dma-channel@3 {
372 compatible = "fsl,mpc8610-dma-channel",
373 "fsl,eloplus-dma-channel";
374 cell-index = <3>;
375 reg = <0x180 0x80>;
376 interrupt-parent = <&mpic>;
377 interrupts = <79 2>;
378 };
379 };
381 };
383 pci0: pci@e0008000 {
384 compatible = "fsl,mpc8610-pci";
385 device_type = "pci";
386 #interrupt-cells = <1>;
387 #size-cells = <2>;
388 #address-cells = <3>;
389 reg = <0xe0008000 0x1000>;
390 bus-range = <0 0>;
391 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
392 0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
393 sleep = <&pmc 0x80000000 0>;
394 clock-frequency = <33333333>;
395 interrupt-parent = <&mpic>;
396 interrupts = <24 2>;
397 interrupt-map-mask = <0xf800 0 0 7>;
398 interrupt-map = <
399 /* IDSEL 0x11 */
400 0x8800 0 0 1 &mpic 4 1
401 0x8800 0 0 2 &mpic 5 1
402 0x8800 0 0 3 &mpic 6 1
403 0x8800 0 0 4 &mpic 7 1
405 /* IDSEL 0x12 */
406 0x9000 0 0 1 &mpic 5 1
407 0x9000 0 0 2 &mpic 6 1
408 0x9000 0 0 3 &mpic 7 1
409 0x9000 0 0 4 &mpic 4 1
410 >;
411 };
413 pci1: pcie@e000a000 {
414 compatible = "fsl,mpc8641-pcie";
415 device_type = "pci";
416 #interrupt-cells = <1>;
417 #size-cells = <2>;
418 #address-cells = <3>;
419 reg = <0xe000a000 0x1000>;
420 bus-range = <1 3>;
421 ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
422 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
423 sleep = <&pmc 0x40000000 0>;
424 clock-frequency = <33333333>;
425 interrupt-parent = <&mpic>;
426 interrupts = <26 2>;
427 interrupt-map-mask = <0xf800 0 0 7>;
429 interrupt-map = <
430 /* IDSEL 0x1b */
431 0xd800 0 0 1 &mpic 2 1
433 /* IDSEL 0x1c*/
434 0xe000 0 0 1 &mpic 1 1
435 0xe000 0 0 2 &mpic 1 1
436 0xe000 0 0 3 &mpic 1 1
437 0xe000 0 0 4 &mpic 1 1
439 /* IDSEL 0x1f */
440 0xf800 0 0 1 &mpic 3 2
441 0xf800 0 0 2 &mpic 0 1
442 >;
444 pcie@0 {
445 reg = <0 0 0 0 0>;
446 #size-cells = <2>;
447 #address-cells = <3>;
448 device_type = "pci";
449 ranges = <0x02000000 0x0 0xa0000000
450 0x02000000 0x0 0xa0000000
451 0x0 0x10000000
452 0x01000000 0x0 0x00000000
453 0x01000000 0x0 0x00000000
454 0x0 0x00100000>;
455 uli1575@0 {
456 reg = <0 0 0 0 0>;
457 #size-cells = <2>;
458 #address-cells = <3>;
459 ranges = <0x02000000 0x0 0xa0000000
460 0x02000000 0x0 0xa0000000
461 0x0 0x10000000
462 0x01000000 0x0 0x00000000
463 0x01000000 0x0 0x00000000
464 0x0 0x00100000>;
466 isa@1e {
467 device_type = "isa";
468 #size-cells = <1>;
469 #address-cells = <2>;
470 reg = <0xf000 0 0 0 0>;
471 ranges = <1 0 0x01000000 0 0
472 0x00001000>;
474 rtc@70 {
475 compatible = "pnpPNP,b00";
476 reg = <1 0x70 2>;
477 };
478 };
479 };
480 };
481 };
483 pci2: pcie@e0009000 {
484 #address-cells = <3>;
485 #size-cells = <2>;
486 #interrupt-cells = <1>;
487 device_type = "pci";
488 compatible = "fsl,mpc8641-pcie";
489 reg = <0xe0009000 0x00001000>;
490 ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
491 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
492 bus-range = <0 255>;
493 interrupt-map-mask = <0xf800 0 0 7>;
494 interrupt-map = <0x0000 0 0 1 &mpic 4 1
495 0x0000 0 0 2 &mpic 5 1
496 0x0000 0 0 3 &mpic 6 1
497 0x0000 0 0 4 &mpic 7 1>;
498 interrupt-parent = <&mpic>;
499 interrupts = <25 2>;
500 sleep = <&pmc 0x20000000 0>;
501 clock-frequency = <33333333>;
502 };
503 };