2 * Device Tree Source for PlatHome OpenBlockS 600 (405EX)
4 * Copyright 2011 Ben Herrenschmidt, IBM Corp.
8 * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
10 * This file is licensed under the terms of the GNU General Public
11 * License version 2. This program is licensed "as is" without
12 * any warranty of any kind, whether express or implied.
20 model = "PlatHome,OpenBlockS 600";
21 compatible = "plathome,obs600";
22 dcr-parent = <&{/cpus/cpu@0}>;
37 model = "PowerPC,405EX";
39 clock-frequency = <0>; /* Filled in by U-Boot */
40 timebase-frequency = <0>; /* Filled in by U-Boot */
41 i-cache-line-size = <32>;
42 d-cache-line-size = <32>;
43 i-cache-size = <16384>; /* 16 kB */
44 d-cache-size = <16384>; /* 16 kB */
46 dcr-access-method = "native";
51 device_type = "memory";
52 reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
55 UIC0: interrupt-controller {
56 compatible = "ibm,uic-405ex", "ibm,uic";
59 dcr-reg = <0x0c0 0x009>;
62 #interrupt-cells = <2>;
65 UIC1: interrupt-controller1 {
66 compatible = "ibm,uic-405ex","ibm,uic";
69 dcr-reg = <0x0d0 0x009>;
72 #interrupt-cells = <2>;
73 interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
74 interrupt-parent = <&UIC0>;
77 UIC2: interrupt-controller2 {
78 compatible = "ibm,uic-405ex","ibm,uic";
81 dcr-reg = <0x0e0 0x009>;
84 #interrupt-cells = <2>;
85 interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
86 interrupt-parent = <&UIC0>;
90 compatible = "ibm,cpm";
91 dcr-access-method = "native";
92 dcr-reg = <0x0b0 0x003>;
93 unused-units = <0x00000000>;
94 idle-doze = <0x02000000>;
95 standby = <0xe3e74800>;
99 compatible = "ibm,plb-405ex", "ibm,plb4";
100 #address-cells = <1>;
103 clock-frequency = <0>; /* Filled in by U-Boot */
105 SDRAM0: memory-controller {
106 compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
107 dcr-reg = <0x010 0x002>;
108 interrupt-parent = <&UIC2>;
109 interrupts = <0x5 0x4 /* ECC DED Error */
110 0x6 0x4>; /* ECC SEC Error */
113 CRYPTO: crypto@ef700000 {
114 compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
115 reg = <0xef700000 0x80400>;
116 interrupt-parent = <&UIC0>;
117 interrupts = <0x17 0x2>;
121 compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
122 dcr-reg = <0x180 0x062>;
125 interrupt-parent = <&MAL0>;
126 interrupts = <0x0 0x1 0x2 0x3 0x4>;
127 #interrupt-cells = <1>;
128 #address-cells = <0>;
130 interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
131 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
132 /*SERR*/ 0x2 &UIC1 0x0 0x4
133 /*TXDE*/ 0x3 &UIC1 0x1 0x4
134 /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
135 interrupt-map-mask = <0xffffffff>;
139 compatible = "ibm,opb-405ex", "ibm,opb";
140 #address-cells = <1>;
142 ranges = <0x80000000 0x80000000 0x10000000
143 0xef600000 0xef600000 0x00a00000
144 0xf0000000 0xf0000000 0x10000000>;
145 dcr-reg = <0x0a0 0x005>;
146 clock-frequency = <0>; /* Filled in by U-Boot */
149 compatible = "ibm,ebc-405ex", "ibm,ebc";
150 dcr-reg = <0x012 0x002>;
151 #address-cells = <2>;
153 clock-frequency = <0>; /* Filled in by U-Boot */
154 /* ranges property is supplied by U-Boot */
155 interrupts = <0x5 0x1>;
156 interrupt-parent = <&UIC1>;
159 compatible = "amd,s29gl512n", "cfi-flash";
161 reg = <0x00000000 0x00000000 0x08000000>;
162 #address-cells = <1>;
165 label = "kernel + initrd";
166 reg = <0x00000000 0x03de0000>;
169 label = "user config area";
170 reg = <0x03de0000 0x00080000>;
173 label = "user program area";
174 reg = <0x03e60000 0x04000000>;
177 label = "flat device tree";
178 reg = <0x07e60000 0x00080000>;
181 label = "test program";
182 reg = <0x07ee0000 0x00080000>;
185 label = "u-boot env";
186 reg = <0x07f60000 0x00040000>;
190 reg = <0x07fa0000 0x00060000>;
195 UART0: serial@ef600200 {
196 device_type = "serial";
197 compatible = "ns16550";
198 reg = <0xef600200 0x00000008>;
199 virtual-reg = <0xef600200>;
200 clock-frequency = <0>; /* Filled in by U-Boot */
202 interrupt-parent = <&UIC0>;
203 interrupts = <0x1a 0x4>;
206 UART1: serial@ef600300 {
207 device_type = "serial";
208 compatible = "ns16550";
209 reg = <0xef600300 0x00000008>;
210 virtual-reg = <0xef600300>;
211 clock-frequency = <0>; /* Filled in by U-Boot */
213 interrupt-parent = <&UIC0>;
214 interrupts = <0x1 0x4>;
218 compatible = "ibm,iic-405ex", "ibm,iic";
219 reg = <0xef600400 0x00000014>;
220 interrupt-parent = <&UIC0>;
221 interrupts = <0x2 0x4>;
222 #address-cells = <1>;
226 compatible = "dallas,ds1340";
232 compatible = "ibm,iic-405ex", "ibm,iic";
233 reg = <0xef600500 0x00000014>;
234 interrupt-parent = <&UIC0>;
235 interrupts = <0x7 0x4>;
238 RGMII0: emac-rgmii@ef600b00 {
239 compatible = "ibm,rgmii-405ex", "ibm,rgmii";
240 reg = <0xef600b00 0x00000104>;
244 EMAC0: ethernet@ef600900 {
245 linux,network-index = <0x0>;
246 device_type = "network";
247 compatible = "ibm,emac-405ex", "ibm,emac4sync";
248 interrupt-parent = <&EMAC0>;
249 interrupts = <0x0 0x1>;
250 #interrupt-cells = <1>;
251 #address-cells = <0>;
253 interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
254 /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
255 reg = <0xef600900 0x000000c4>;
256 local-mac-address = [000000000000]; /* Filled in by U-Boot */
257 mal-device = <&MAL0>;
258 mal-tx-channel = <0>;
259 mal-rx-channel = <0>;
261 max-frame-size = <9000>;
262 rx-fifo-size = <4096>;
263 tx-fifo-size = <2048>;
264 rx-fifo-size-gige = <16384>;
265 tx-fifo-size-gige = <16384>;
267 phy-map = <0x00000000>;
268 rgmii-device = <&RGMII0>;
270 has-inverted-stacr-oc;
271 has-new-stacr-staopc;
274 EMAC1: ethernet@ef600a00 {
275 linux,network-index = <0x1>;
276 device_type = "network";
277 compatible = "ibm,emac-405ex", "ibm,emac4sync";
278 interrupt-parent = <&EMAC1>;
279 interrupts = <0x0 0x1>;
280 #interrupt-cells = <1>;
281 #address-cells = <0>;
283 interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
284 /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
285 reg = <0xef600a00 0x000000c4>;
286 local-mac-address = [000000000000]; /* Filled in by U-Boot */
287 mal-device = <&MAL0>;
288 mal-tx-channel = <1>;
289 mal-rx-channel = <1>;
291 max-frame-size = <9000>;
292 rx-fifo-size = <4096>;
293 tx-fifo-size = <2048>;
294 rx-fifo-size-gige = <16384>;
295 tx-fifo-size-gige = <16384>;
297 phy-map = <0x00000000>;
298 rgmii-device = <&RGMII0>;
300 has-inverted-stacr-oc;
301 has-new-stacr-staopc;
304 GPIO: gpio@ef600800 {
305 device_type = "gpio";
306 compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio";
307 reg = <0xef600800 0x50>;
312 stdout-path = "/plb/opb/serial@ef600200";