arch/powerpc/boot/dts/pcm030.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
   4  *
   5  * Copyright 2006 Pengutronix
   6  * Sascha Hauer <s.hauer@pengutronix.de>
   7  * Copyright 2007 Pengutronix
   8  * Juergen Beisert <j.beisert@pengutronix.de>
   9  */
  10
  11 /include/ "mpc5200b.dtsi"
  12
  13 &gpt0 { fsl,has-wdt; };
  14 &gpt2 { gpio-controller; };
  15 &gpt3 { gpio-controller; };
  16 &gpt4 { gpio-controller; };
  17 &gpt5 { gpio-controller; };
  18 &gpt6 { gpio-controller; };
  19 &gpt7 { gpio-controller; };
  20
  21 / {
  22         model = "phytec,pcm030";
  23         compatible = "phytec,pcm030";
  24
  25         soc5200@f0000000 {
  26                 audioplatform: psc@2000 { /* PSC1 in ac97 mode */
  27                         compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
  28                         cell-index = <0>;
  29                 };
  30
  31                 /* PSC2 port is used by CAN1/2 */
  32                 psc@2200 {
  33                         status = "disabled";
  34                 };
  35
  36                 psc@2400 { /* PSC3 in UART mode */
  37                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  38                 };
  39
  40                 /* PSC4 is ??? */
  41                 psc@2600 {
  42                         status = "disabled";
  43                 };
  44
  45                 /* PSC5 is ??? */
  46                 psc@2800 {
  47                         status = "disabled";
  48                 };
  49
  50                 psc@2c00 { /* PSC6 in UART mode */
  51                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  52                 };
  53
  54                 ethernet@3000 {
  55                         phy-handle = <&phy0>;
  56                 };
  57
  58                 mdio@3000 {
  59                         phy0: ethernet-phy@0 {
  60                                 reg = <0>;
  61                         };
  62                 };
  63
  64                 i2c@3d40 {
  65                         rtc@51 {
  66                                 compatible = "nxp,pcf8563";
  67                                 reg = <0x51>;
  68                         };
  69                         eeprom@52 {
  70                                 compatible = "catalyst,24c32", "atmel,24c32";
  71                                 reg = <0x52>;
  72                                 pagesize = <32>;
  73                         };
  74                 };
  75
  76                 sram@8000 {
  77                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
  78                         reg = <0x8000 0x4000>;
  79                 };
  80         };
  81
  82         pci@f0000d00 {
  83                 interrupt-map-mask = <0xf800 0 0 7>;
  84                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
  85                                  0xc000 0 0 2 &mpc5200_pic 1 1 3
  86                                  0xc000 0 0 3 &mpc5200_pic 1 2 3
  87                                  0xc000 0 0 4 &mpc5200_pic 1 3 3
  88
  89                                  0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
  90                                  0xc800 0 0 2 &mpc5200_pic 1 2 3
  91                                  0xc800 0 0 3 &mpc5200_pic 1 3 3
  92                                  0xc800 0 0 4 &mpc5200_pic 0 0 3>;
  93                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
  94                           0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
  95                           0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
  96         };
  97
  98         localbus {
  99                 status = "disabled";
 100         };
 101
 102         sound {
 103                 compatible = "phytec,pcm030-audio-fabric";
 104                 asoc-platform = <&audioplatform>;
 105         };
 106 };